Users get stuck in SAPMHTTP in SM51
Hello,
We just went live with 2004s and we have something that we never saw in our test phases. We have users that run reports and in SM51, they get stuck in pgm SAPMHTTP and endup with a TIME_OUT dump.
We are on SPS7. P.S. : We are not using the portal yet (keeping the goodies for later) but we have it installed in our DEV environment.
As anyone seen this before?
Thanks,
D.
Hi
In our landscape we are using XSS-MSS applications. 48 hours/ peak hours in Backend system Dialog work process is full. i.e Portal user stuck situation. Any idea Please share me
Similar Messages
-
Is Apple not aware of all the users getting stuck in BACKUP loading OS 5?
I know I'm not the only person running PC XP that is getting stuck in Backing up your iPhone purgatory!!! This is the third morning I've checked my iPhone 4 after letting it attempt to update ALL NIGHT LONG. It has been sitting on my desk, connected with the backup window running blue left to right with no apparent progress in updating. I click on STOP and it says it's cancelling the update but then it gets stuck. Can't stop it, can't close the window and have to end up using Task manager to stop the application. 3 attempts - 3 completely identical set of results. I've been updating and syncing since iPhone 2 without any issue. Now the supposedly wonderful update doesn't work. I am saddened by the loss of Steve Jobs, the man the visionary. I've never had an issue with any of my 5 iPhones (2G 4GB, 2G 8GB, 3G 16GB, 3GS 32GB and this 4G 16GB). I'm lost because I've never had to think about discussing a problem. I've googled my issue and other than older posts related to previous OS issues, my issue seems to be relatively new. HELP!!!!
The phone you bought is NOT unlocked. The seller lied.
-
If anchor WLC fails, roaming wireless users get "stuck"
I did a test in our lab where I roamed from an AP on WLC A to an AP on WLC B. My client kept its same IP address and connectivity remained. I'm running WLC 4.0.219, so the traffic at this point was not symetrical, but the connectivity was up. WLC A was the Anchor WLC.
Then, I failed WLC A. My wireless client still had its original IP address from WLC, so I lost all connectivity. WLC B did not try to anything so that my client would get a new IP address (from WLC B) and regain connectivity.
The only way I could get my client to work again was to go to WLC B and "Remove" the client. It looks like this forced the client to re-authenticate and get a new IP address.
Is this the only way to get a client back on the network in this type of failure scenario?Did both WLC's have dynamic interfaces on the same subnet or did each WLC have interfaces on different subnets. I have tried this failure before with no issues, as long as the WLC have interfaces on the same subnet for the users.
-
My imac is doing strange things:
-delaying between users: when closing session it goes to blue, then takes a while to appear users signin box, and then wont recognize mouse command to enter until a couple of minutes later... then everything seems alright until....
-it gets stuck between things, the rainbow wheel appears and its just delays there forever....
-and every now and then the mouse starts flickering and bouncing wildly onscreen.
I ran the appel hardware test and it detected an error:
4MOT/4/40000003:HDD-1233
Does anybody know what that means? HELP!WZZZ answered about where to get iStat. And do check the SMART status. If it is an overheating problem due to a fan or logic board problem, your hard drive is possibly cooking itself to death. If so it isn't a faulty hard drive even though the hard drive might fail. So assuming it's a temperature problem, even if you are able to repair things on the disk with software, that is working on symptoms, not causes. I could be wrong however.
RE: AppleCare: Your iMac came with one year of AppleCare (Apple's warranty program), but within the first year you can buy 2 more years. You have to extend by the one year anniversary of purchase of the computer. Your 10,1 is too old to still be in the first year, and since you asked what it was, I'm sure you don't have it. Bottom line meaning is that whatever this problem turns out to be, you'll have to pay for it. Unless there is something like this. It is for 2011 iMacs with certain Seagate drives. You can put in your serial number for fun, but it looks like yours is too old. Lastly, some people have had Apple help them anyway if it is just out of warranty, but many have not. Your machine is one of these. Type in 10,1 in the search box. Is there an Apple Store near you? Just b/c it's out of warranty doesn't mean you shouldn't have it looked at by Apple. But no one here can say at all what Apple will or will not do.
Hope you get it taken care of! -
Desperate user need help. My GPIB instrument get stuck with my labview program frequently
Hello to all labview users,
i am a beginner in using labview. I am currently writting a labview program to automatically control a digital control rotator HD201e and a network analyzer 8720a to work with the anechoic chamber. The program receives an initial position, amount of increment and # of steps. My program will then ask the controller to rotate to the initial position and at the meantime, the program will monitor the position of the rotator to ensure the requested position is reached. After that, at the position, the program will ask the NA to perform a reading of the measurement. Once the reading is done, the program will ask the controller to rotate to the next position and does a reading of the measurement and so on.
My program seems to be able to perform the tasks; however, the dig.controller part seems to get stuck around 50% of the time when running the program. Sometimes, even the controller receives the requested position (can be seen from the lcd screen of the controller), the rotator just simply would not rotate; also, sometimes, the controller just simply does not respond when sending the command of moving a position, as in the debug mode (the one with a lightbulb), i see that i got "ok" on all the blocks in the writing portion ofthe program, but the controller just doesnt seem to receive the position (as seen no new position received from the lcd screen) and the cursor on the lcd screen blinks weirdly, due to that problem, my program will then get stuck in an infinite loop.....
Usually, that problem occurs after few positions have been reached.....
so, when that happens, i have to stop my program and re-run it. that means the program will have to re-do the measurement that were read previously....
sometimes i have to stop and re-run my program several times to get all the measurement of all the positions done.....so...that bug renders that program to be an unefficient program.
I have been trying to resolve that bug for weeks...but no success....i have tried to put some wait time between each block....result is not much different...
I have also tried putting "clear" block before and after the "write" block.....same problem.....
I have heard that the serial GPIB "flush" block may help...but i tried..but it seems the controller doesnt recognize/accept flush....
i have also tried using the "Visa open" and "Visa close" block to see if ithat reduces the stucking thing....but seems that the controller can still get stuck....
i have also even tried using "lock asyn" and "unlock asyn" block...but didnt seem to work....
Has anyone experienced such problem.? Is it a known problem with some gpib instrument?
Is there any discrepancy or bugs in my program that i am unaware of that causes this problem?
Any advice and or opinion would be greatly appreciated....
PS: i attached the controller part of my program and the overall program
desperate happyguy......
Happy guy
~ currently final year undergraduate in Electrical Engr. Graduating soon! Yes!
~ currently looking for jobs : any position related to engineering, labview, programming, tech support would be great.
~ humber learner of LabVIEW lvl: beginner-intermediate
Attachments:
HD201_Controld.jpg 231 KB
AChamber_Measurements_v1d.jpg 857 KB
AChamber_Measurements_v1d3.jpg 463 KBhi xseadog
i got what you meant about the gpib reference
actually, that final frame works because the gpib reference is already done inside that subvi.
but my problem doesnt arise from that. most of the time ive seen, it arises between the writing frame and the while loop frame. as i mentionned, sometimes. the controller just simply doesnt rotate even i can see the requested position display on the controller lcd screen; also sometimes, just the controller is stuck without acknowledging the write position command. but in labview...while in debug mode. it is shown ok on the block.
Happy guy
~ currently final year undergraduate in Electrical Engr. Graduating soon! Yes!
~ currently looking for jobs : any position related to engineering, labview, programming, tech support would be great.
~ humber learner of LabVIEW lvl: beginner-intermediate
Attachments:
HD-201 RPosd.jpg 39 KB -
Workitems getting stuck at expired users
Hi,
We have a case where workitems get stuck because the assigned users have expired validity.
At the time of assignment, one user is set as agent. Then that user gets set to expired, however the Workitem still is assigned to that one user.
This will create an issue where invoices are not handled at all.
I'm thinking that this must be a common workflow issue, or that there must be a common solution - that you guys know how to solve
BR
LasseAs Rick said, definately some kind of escalation process should take place in invoice handling process. If approver does not approve the invoice in time, it will be escalated to approver's manager or whatever (or the invoice will return to accounts payable clerk, etc.).
Now since you already have the problem, you need to somehow monitor the situation. You can for example try monitor the work items with SWIA (look for all invoice approval tasks that are in status READY in In PROCESS).
Regards,
Karri -
My Lion Server gets stuck on 'Reading Settings when configuring Network Users and Groups
On 10.7.1 and it gets stuck on this setting: Any thoughts?
Hi,
>>On the Server 2012 R2 - I can add the User but the field to put in the Password and Confirm Password are greyed out.
This functionality is being removed because the password was stored insecurely.
Regarding this point, the following article and blog can be referred to for more information.
MS14-025: Vulnerability in Group Policy Preferences could allow elevation of privilege: May 13, 2014
http://support.microsoft.com/kb/2962486
Group Policy Preferences Password Behaviour Change – MS14-025
http://www.grouppolicy.biz/2014/05/group-policy-preferences-password-behaviour-change-ms14-025/
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen -
MY mac wont start past the gray screen. I tried starting on safe boot, single user user mode , recovery mode. Everything it gets stuck on the gray screen i even tried reinstalling it , same thing what should i do? it lets me reinstall sometimes Sometimes.... it is weird.
orshikhfromsc,
boot from the Mac OS X Install DVD that originally came in the box with your MacBook Pro (by holding down the C key as it starts up). When the desktop appears, select Disk Utility from the Utilities menu and erase your internal disk. After it’s been erased, reformat it. After it’s been reformatted, exit Disk Utility and reïnstall the version of Mac OS X from that DVD onto your internal disk. After that version of Mac OS X has been reïnstalled, boot from your internal disk and run Software Update to get it up-to-date within that version; that should allow you to redownload and reïnstall Mavericks, if desired. If Mavericks is reïnstalled, run Software Update again to get it up to date.
If you no longer have the two grey installation DVDs, you can purchase a replacement set from either Apple or iFixit. -
When I click on my user name and enter my password to login, I get stuck on the space background
When I try to login to my Macbook, I get stuck on the space background...help please.
yes me to!
-
Text won't stop deleting, delete key appears to get "stuck"
Sorry if this is in the wrong topic, I have never used the support forums for any of the multitude of problems I have had with my Mac, but this one is severe and odd enough that I couldn't even find anyone else discussing it (although I'm sure someone is, but I tried many search key combinations on Google and only found unrelated things), so I decided to at least get it documented.
I have had an issue that has happened at least 3 times I can remember (I am fairly certain it has happened more, closer to 7-8, those are just the times I am 100% confident about), although very spaced apart and infrequent, where my delete/backspace key seems to get "stuck". However, at least one time I can verify that I never even hit the key. Whatever text I currently have open immediately starts deleting at lightspeed, and I can do nothing to stop it. None of the other keys on my keyboard work, and though my mouse works, if I click somewhere else, it starts deleting the text there. When I force it to go to another window where there isn't an open text box, I get the general Mac error sound, and it repeats non-stop, and faster than I've ever heard it. I have to do a hard shut-down, although once it led to a kernal panic. When I have stopped whatever is happening before it panics though, when I restart, I don't receive any kind of error message, nor the message about OS X not having been shut down properly.
Every single time it has happened when I was typing something that couldn't be saved, like a message on a forum, a private message on a site or an IM chat window. Sometimes I lost a half hour's worth of work or more.
The first time it happened, I honestly thought someone had managed to hack into my computer, but another time I was using a physical modem and Airport was turned off, and when I ripped out the cord, it didn't stop.
I have a MacBook Pro from 2007, running the most recent version of Tiger. I haven't had the money to upgrade. All security updates are up-to-date, with one exception: I have not upgraded to the most recent version of iTunes.
Honestly, I currently am having and have been having a bunch of other severe issues with my Mac, so troubleshooting will be quite difficult as it's not at all impossible it's a result of one of my other problems. I also currently am dealing with some health problems that make me unable to try to find the root of the problem, specifically I have a problem with my hand and wrist that makes typing very difficult.
If someone does recognize this issue and already knows why it might be happening, I'd appreciate the help. I'd also appreciate anyone letting me know how I can prevent it OR what to do when it begins and how to stop it. But I probably will be unable to go through a typical troubleshooting rundown.
As I said, I just wanted this documented, and I also would like to know if anyone else has had this problem. I have never experienced an issue like this with any of my past computers, including Macs and PCs. I do know however that the key is NOT physically getting stuck - as in getting lodged down and continuing to be pressed. There is at least 1 time I can verify I never even hit the key (I wasn't typing anything at the time). I am fairly sure the problem is entirely unrelated to the actual delete key itself.
I'll describe the symptoms one more time:
At a random time, with no discernible warning, text contained in whatever text box I have open begins deleting itself. Several paragraphs disappear in a matter of seconds.
Pressing escape or any other key on the keyboard does nothing. If I click to another area in the text, it will immediately begin deleting wherever I have placed the cursor. If I go to another window with text that can be edited, it begins deleting there. It does not delete in more than one place simultaneously.
If I bring another window without any kind of "deletable" text to the front, one of the general Mac error sounds (I'm not sure which one it is) starts happening and repeats without stopping at a rate that could induce a seizure. To stop it all, the only thing I have found can be done is a hard shut-down. Another time it continued to end in a kernal panic. I wish I had the details of the error, but it was so long ago and I have no idea which panic is the right one in the logs.
I have no way of knowing what programs were running at the time, as obviously that's not something I'm able to pay attention to when it happens, and it has happened so randomly and infrequently it's nothing I've been able to document. Since I have to restart to make it stop, I've then lost that info and I have no time to try to write it down or something beforehand.
I have not had any similar issues that I know of (for instance, for the "g" key keeps repeating and won't stop typing "g's") and I've never experienced this on any past computer.
Thanks for anyone who can help!
If you aren't able to offer advice but have had this issue yourself, PLEASE let me know. I can't seem to find anyone who has experienced this particular problem."Cleaning the keyboard is the first step in troubleshooting sticky/stuck keys."
Okay, I guess I misunderstood, although I am still confused. You're saying that since the other user did an extensive clean of their keyboard and this did not solve the problem, it is "most likely" a hardware problem, correct? Wouldn't a thorough cleaning without any results show that it's probably not physically related to the keyboard?
"The "delete" key may be defective or the cover you are using somehow is making the key stick. If you have ruled out the latter and everything else, your only other alternative is to take the MBP to your local Apple Store or AASP. The staff will check out your keyboard (free) to confirm if you are having a hardware problem. If you have AppleCare or ProCare, the repairs will be free. If not.................."
Well, I had just said in my most recent post that it has now happened with other keys, and in my initial post that it happened at times when my hands were nowhere near the keyboard. It is not a defective delete key and the cover is not making the keys stick - it doesn't adhere to them and does not have any sticky substance on it of any kind. I am an experienced computer user, and I know my computer very well. While I am not a psychic that can always know what is causing a problem, I am able to discern with much accuracy what is NOT causing it.
Also, I have significant health issues so getting to an Apple store would be a huge challenge for me. And although I have AppleCare any repairs won't be free. Due to some small physical damage my laptop obtained a few years ago, I have been completely refused almost all service that I paid over $300 for, even though the damage is completely superficial. After fighting this, I was told they WOULD repair my computer, however, they would also repair the physical damage despite my insisting NOT to; I had no choice in the matter and the cost would be a minimum of $1,500 (I also would not be informed the exact price until after and my credit card would be charged without my knowledge - I had to give them my credit card number and sign away their right to make any charges and when I requested being contacted before they charged me for the repairs I didn't want done, I was told they did not do that). My family is struggling to pay for my $5 medications.
When my logic board died (that same issue that affected thousands of computer users), I had to print out Apple's report from their site, which stated that they would replace and repair them free of charge to ANY Mac owner with a computer that met certain qualifications (which mine did). When it happened, completely out of nowhere, I knew immediately that was the problem, yet still had to go through the insulting and idiotic "Is your computer plugged in?" list of things and a customer WITH AppleCare was being refused a service they'd offered to people WITHOUT AppleCare, for a known manufacturing defect that has occurred widely in nearly every brand of computer made. -
When I try to update to iOS5, iTunes gets stuck on "Backing Up" its been there for hours and it barely moves. It finished backing up one then it went to a "Extracting Software" on the iTunes status bar up top and then it gave me an error saying something along the lines of "There was an error with the server" and back to square 1. Ive been trying since the morning and same problem. Always stuck on the backup, help?
You may have lost your connection to the apple server or connection with your itunes library.
1) You will need to shutdown Itunes and disconnect your iphone from the USB cable.
2) Reconnect your Iphone to the usb cable, wait for the device to be recognised and or drivers to be installed.
3) once all ok, your itunes should automatically open up/connect (if you have this setting set on), otherwise double click your itunes icon on your desktop.
4) once all sychronised and connected. go to Summary tab and UPDATE your iphone again.
Hope this works for you, as this happend to me and tried the above steps and wala!!! all good.
If the above still fails, restart your pc/apple and turn off/on your modem and then try again.
this normally happens if your connection from your device to the itunes hangs or looses its connection, or have a bad connection to the internet / apple server.
in windows the RPC Locator is normally the cause of this, in apple i have no idea (as im not an apply user).
Give it a shot!
if this helps you and works ...why not rep/like my response up! -
IPhoto '11 (9.3) - Won't upgrade library after update to 9.3 (gets stuck on Step 5)
Two weeks ago I upgraded iPhoto to 9.3 using the automatic Apple updater. Thereafter, when I try to re-start iPhoto, iPhoto automatically attempts to upgrade the library using multiple steps. Each time the process gets stuck on one of the steps, hanging for as long as I'd let it. Force quit doesn't show the process/application as not responding, but I can kill the applicaiton and try again.
I see this is a somewhat common occurrence (for example, here), but I haven't yet found a solution that works, at least not for me.
Since this problem has started occurring, the process tends to get stuck at the end of step 5:
I have tried multiple solutions, including holding down alt/option or control when starting iPhoto for force a rebuild of the library (same result). I reinstalled iPhoto from the App store (same result). I went back to a version of my iPhoto library from before the problem started using a Time Machine backup of the iPhoto Library (same result). And in response to some threads suggesting removing the files like com.apple.iPhoto.plist (see here) but I can't find any "com.apple.iPhoto.*" files on my HD. Interestingly (maybe) I don't have a HD -> Users -> Home -> Library directory at all. I only have a HD -> Library directory (although perhaps this is where it shows up for my primary account when I'm using this account).
I'd be very grateful for any help/suggestions/guidance.
For example, is there a log file showing the date that I upgraded to the newest iPhoto release so I can be sure I'm restoring an older iPhoto library? Any other ideas?
Many thanks!
-DJgI have try to do few things like rebuild library, intalling old version etc. at the end always i got images and events but I loose folders and albums.
So finally
I bought external drive to make a copy of my images
I found my old backup of MAC OS X before upgrade to Lion and install them
All folers are existing so now I can imoprt only images from last two months and rearrange them into folders.
I will stay with version 9.2.3 and wait at least 1-2 month before I will install any new update from Apple. -
Get Stuck in Webutil1.0.6 Configuration & Installation..
Dear All Experts,
I m trying to configure and Install webutil1.0.6 on Oracle Developer Suit (9.0.4) in
Windows XP Professional having the browser Internet explorer 6.0.
I have done almost all the steps mentioned in Runtime Setup Checklist (Appendix A)
in Webutil Users Guide Release 1.0.6 . Except Step 9 Configure your webutil.cfg file.
Have a look at my default.env & formsweb.cfg files.
default.env
# $Id: win32_os_default.env,v 1.5 2003/10/02 18:42:24 pkuhn Exp $
# default.env - default Forms environment file, Windows version
# This file is used to set the Forms runtime environment parameters.
# If a parameter is not defined here, the value in the Windows registry
# will be used. If no value is found in the registry, the value used will
# be that defined in the environment in which the servlet engine (OC4J
# or JServ) was started.
# NOTES
# 1/ The Forms installation process should replace all occurrences of
# <percent>FORMS_ORACLE_HOME<percent> with the correct ORACLE_HOME
# setting, and all occurrences of <percent>O_JDK_HOME<percent> with
# the location of the JDK (usually $ORACLE_HOME/jdk).
# Please make these changes manually if not.
# 2/ Some of the variables below may need to be changed to suite your needs.
# Please refer to the Forms documentation for details.
ORACLE_HOME=D:\DS10g
# Search path for Forms applications (.fmx files, PL/SQL libraries)
# If you need to include more than one directory, they should be semi-colon
# separated (e.g. /private/dir1;/private/dir2)
FORMS90_PATH=D:\DS10g\forms90;D:\invsys;D:\DS10g\forms90\webutil_106;D:\Webutil_demo
# The PATH setting is required in order to pick up the JVM (jvm.dll).
# The Forms runtime executable and dll's are assumed to be in
# D:\DS10g\bin if they are not in the PATH.
# In addition, if you are running Graphics applications, you will need
# to append the following to the path (where <Graphics Oracle Home> should
# be replaced with the actual location of your Graphics 6i oracle_home):
# ;<Graphics Oracle Home>\bin;<Graphics Oracle Home>\jdk\bin
PATH=D:\DS10g\bin;D:\DS10g\jdk\jre\bin\client
# Settings for Graphics
# NOTE: These settings are only needed if Graphics applications
# are called from Forms applications. In addition, you will need to
# modify the PATH variable above as described above.
# Please uncomment the following and put the correct 6i
# oracle_home value to use Graphics applications.
#ORACLE_GRAPHICS6I_HOME=<your Graphics 6i oracle_home here>
# Search path for Graphics applications
#GRAPHICS60_PATH=
# Settings for forms9i tracing and logging
# Note: This entry has to be uncommented to enable tracing and
# logging.
#FORMS90_TRACE_PATH=<FORMS_ORACLE_HOME>\forms90\server
# System settings
# You should not normally need to modify these settings
FORMS90=D:\DS10g\forms90
WEBUTIL_CONFIG=D:\DS10g\forms90\webutil_106\server\webutil.cfg
# Java class path
# This is required for the Forms debugger
# You can append your own Java code here)
# f90srv.jar, repository.jar and ldapjclnt9.jar are required for
# the password expiry feature to work(#2213140).
CLASSPATH=D:\DS10g\j2ee\OC4J_BI_Forms\applications\forms90app\
forms90web\WEB-INF\lib\f90srv.jar;D:\DS10g\jlib\repository.jar;
D:\DS10g\jlib\ldapjclnt9.jar;D:\DS10g\jlib\debugger.jar;D:\DS10g\forms90\webutil_106\java\frmwebutil.jar;D:\DS10g\jlib\ewt3.jar;D:\DS10g\jlib\share.jar;D:\DS10g\jlib\utj90.jar;
D:\DS10g\jlib\zrclient.jar;D:\DS10g\reports\jlib\rwrun.jar;D:\DS10g\jdk\jre\lib\rt.jar;D:\DS10g\forms90\java\f90all.jar
formsweb.cfg
# $Id: formsweb.cfg,v 1.24 2003/08/22 01:07:35 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (f90servlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overriden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/servlet/f90servlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
# System parameter: default base HTML file
baseHTML=base.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# System parameter: base HTML file for use with Microsoft Internet Explorer
# (when using the native JVM)
baseHTMLie=baseie.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms90 if unset.
workingDirectory=
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# System parameter: JVM option for Microsoft Internet Explorer.
# This parameter specifies how to execute the Forms applet under
# Microsoft Internet Explorer 5.x or above. Put IE=native if you want
# the Forms applet to run in the browser's native JVM.
IE=JInitiator
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
form=test.fmx
# Forms runtime argument: database connection details
userid=
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms90/l90servlet
# Forms applet parameter
codebase=/forms90/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
width=750
# Forms applet parameter
height=600
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=f90all_jinit.jar;invsysicons.jar;frmwebutil.jar;jacob.jar
# webutil....
WebUtilArchive=frmwebutil.jar;jacob.jar
# Forms applet archive setting for Microsoft Internet Explorer native JVM
archive_ie=f90all.cab
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=f90all.jar;invsysicons.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms90/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0017-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,17
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.17
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/plugin/1.3/plugin-install.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/1.3/jinstall-13-win32.cab#Version=1,3,0,0
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;version=1.3
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
# Single Sign-On OID configuration parameter
oid_formsid=%OID_FORMSID%
# Single Sign-On OID configuration parameter
oracle_home=D:\DS10g
# Single Sign-On OID configuration parameter
formsid_group_dn=%GROUP_DN%
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/servlet/f90servlet?config=sepwin".
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration affecting users of MicroSoft Internet Explorer 5.x.
# Forms applet will run under the browser's native JVM rather than using Oracle JInitiator.
[ienative]
IE=native
# Example Named Configuration Section
# Example 3: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
baseHTMLie=basejpi.htm
# Example Named Configuration Section
# Example 4: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms90/l90servlet/debug
# Trying own applications
[itsys]
form=frm_sline.fmx
userid=docsys/docsys@orauma
separateFrame=True
lookandfeel=Generic
# Inventory system UMA, applications
[invsys]
form=FRM_LOGIN.fmx
userid=docsys/docsys@orauma
lookandfeel=Generic
# Sample configuration for deploying WebUtil.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTML=webutilbase.htm
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle
[webutilie]
IE=native
webUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTML=webutilbase.htm
baseHTMLie=webutilbase.htm
archive=frmall.jar
lookAndFeel=oracle
[webutiljpi]
webUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljpi.htm
baseHTMLjpi=webutiljpi.htm
baseHTMLie=webutiljpi.htm
baseHTML=webutiljpi.htm
archive=frmall.jar
lookAndFeel=oracle
NOW while I run form from RuntimeSettings=default
http://rana-adnan.umarine.local:8889/forms90/f90servlet?userid=docsys/docsys@orauma
Form runs successfully on browser but while pressing button for File Open OR Save As
It shows the error
Oracle.forms.webutil.file.FileFunctions bean not found.
WEBUTIL_FILE.FILE_SELECTION_DIALOG_INT will not work.
AND while I run form from RuntimeSettings=webutil or webutilie or webutiljpi
http://rana-adnan.umarine.local:8889/forms90/f90servlet?config=webutil&userid=docsys/docsys@orauma
Form does not run and browser gives the error
500 Internal Server Error
Forms Servlet Error.
Missing or invalid value for baseHTML parameter.
Please check the servlet configuration to make sure this value specifies a valid file.
I get stuck here.
Kindly help me to use webutil1.0.6
Thanks
Rana AdnanDear,
Now I have Installed the Jinitiator1.3.1.22 in C:\Program Files\Oracle\JInitiator 1.3.1.22
and edit the configuration in formsweb.cfg
Now it looks
# $Id: formsweb.cfg,v 1.24 2003/08/22 01:07:35 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (f90servlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overriden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/servlet/f90servlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
# System parameter: default base HTML file
baseHTML=base.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# System parameter: base HTML file for use with Microsoft Internet Explorer
# (when using the native JVM)
baseHTMLie=baseie.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms90 if unset.
workingDirectory=
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# System parameter: JVM option for Microsoft Internet Explorer.
# This parameter specifies how to execute the Forms applet under
# Microsoft Internet Explorer 5.x or above. Put IE=native if you want
# the Forms applet to run in the browser's native JVM.
IE=JInitiator
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
form=test.fmx
# Forms runtime argument: database connection details
userid=
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms90/l90servlet
# Forms applet parameter
codebase=/forms90/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
width=750
# Forms applet parameter
height=600
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=f90all_jinit.jar,invsysicons.jar,frmwebutil.jar,jacob.jar
# webutil....
WebUtilArchive=frmwebutil.jar,jacob.jar
# Forms applet archive setting for Microsoft Internet Explorer native JVM
archive_ie=f90all.cab
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=f90all.jar;invsysicons.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms90/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,22
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/plugin/1.3/plugin-install.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/1.3/jinstall-13-win32.cab#Version=1,3,0,0
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;version=1.3
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
# Single Sign-On OID configuration parameter
oid_formsid=%OID_FORMSID%
# Single Sign-On OID configuration parameter
oracle_home=D:\DS10g
# Single Sign-On OID configuration parameter
formsid_group_dn=%GROUP_DN%
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/servlet/f90servlet?config=sepwin".
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration affecting users of MicroSoft Internet Explorer 5.x.
# Forms applet will run under the browser's native JVM rather than using Oracle JInitiator.
[ienative]
IE=native
# Example Named Configuration Section
# Example 3: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
baseHTMLie=basejpi.htm
# Example Named Configuration Section
# Example 4: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms90/l90servlet/debug
# Trying own applications
[itsys]
form=frm_sline.fmx
userid=docsys/docsys@orauma
separateFrame=True
lookandfeel=Generic
# Inventory system UMA, applications
[invsys]
form=FRM_LOGIN.fmx
userid=docsys/docsys@orauma
lookandfeel=Generic
# Sample configuration for deploying WebUtil.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=on
WebUtilLoggingDetail=normal
WebUtilErrorMode=AllWebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTML=webutilbase.htm
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=f90all_jinit.jar
archive=f90all.jar
lookAndFeel=oracle
[webutilie]
IE=native
webUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTML=webutilbase.htm
baseHTMLie=webutilbase.htm
archive=f90all.jar
lookAndFeel=oracle
[webutiljpi]
webUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljpi.htm
baseHTMLjpi=webutiljpi.htm
baseHTMLie=webutiljpi.htm
baseHTML=webutiljpi.htm
archive=f90all.jar
lookAndFeel=oracle
Now when I run the form then browser shows Jinitiator Security Warning dialog and I clicked on "Grant this Session" and it show nothing
and java console showing this..
Oracle JInitiator: Version 1.3.1.22
Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\rana.adnan
Proxy Configuration: no proxy
JAR cache enabled
Location: C:\Documents and Settings\rana.adnan\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Loading http://rana-adnan.umarine.local:8889/forms90/java/frmwebutil.jar from JAR cache
RegisterWebUtil - Loading WebUtil Version 1.0.6
Is there any signing jar files problem or any other?
Please help
Thanks
Rana adnan -
In 'mail', after importing mailboxes the process gets stuck on '1619 of 72826' and 'time remaining' climbs infinitely. Please suggest a solution.
I converted my mail boxes from POP to imap for the purpose of syncing all my devices. I backed up my mail boxes and further more perfomed a timemachine backup.
Upon restoring ther mailboxes, either by manually copying them to the mailboxes folder, and restoring a timemachine backup, both pocesses result in the above problem.
Please recomend a solution.
file://localhost/Users/redwood/Desktop/Screen%20Shot%202013-10-15%20at%201.48.10 %20PM.png
file://localhost/Users/redwood/Desktop/Screen%20Shot%202013-10-15%20at%201.38.30 %20PM.pngCan anyone out there please help!
-
DVD plays well on some machines, gets stuck on others
Made a 20-minute DVD, having done all my editing, etc. in iMovie and exported to iDVD5. Once burned, tested it on my iMac and it worked fine. Also worked fine in a friend's stand-alone DVD player.
But some users since have this problem: the DVD plays well for a few minutes, but gets "stuck" after a while, and ultimately freezes. And it's not the same "stuck" point for each user (if that was the case, I would think the physical disk had a problem.) It's different points for different people that it seems to get "stuck" and freezes.
In one case, user took "stuck" disk out of stand-alone DVD player and watched it in their laptop (PC) and all went well.
Any hints as to why the DVD is getting stuck on some DVD players?
iMac G4 Mac OS X (10.4.4
Mac OS X (10.3.8)Probably a "bad" burn, the result of a DVD-R that some players don't like.
Try these things:
1) another brand of DVD-R (I Like Verbatim)
2) Burn at a slower speed. To do this with iDVD you have to "save as disk image" and then burn the image with Disk Utility (DU) or Toast. For some reason, I can't always choose slower burning speeds with DU, not sure why.
John
Maybe you are looking for
-
My ipod touch is being recognized by my comuter but it wont show up in my itunes. Why?
I recently got an ipod touch from a friend and i can't get it to show up in my itunes. When i connected it, my computer recognized it.
-
Need to upgrade from 10.7.5 to 10.8.6+ - no Mavericks
We have an immediate need to upagrade from 10.7.5 server to at least 10.8.6 SERVER today to support some Apple pro software we need to install / use today. We do not - emphasis do not - want to move to Marvericks or OS X server for mavericks. There a
-
System performance slow - vanishing wallpaper
My G5 seems to be experiencing a performance slowdown but it passes any diagnostic test that I perform. Lately it has been misbehaving when asked to handle graphicly complex applications such as iPhoto and Photoshop. It also "forgets" my wallpaper an
-
Indesign CC menus appearing at wrong place
Installed Indesign cc. everything works fine, except for the pull-out menus in the tool palette. I have a dual monitor setup, using windows 8, and when I click (the little triangle) and hold to pull up extra tools... they appear on my other monitor o
-
CS password invalid ACS 4.0 window Radius
Hi, Need help with Cisco Secure ACS 4.0