Users group help?
greetings,
i can't find another place for this question. i'm having problems registering our macintosh user's group. over the last couple weeks, i've sent several messages to the email listed for user's group help, but have not gotten any response. i'm not sure where else to turn to for help.
does anybody have any suggestions for how to get help registering our user's group?
thanks-
jeffery
Have you gone this route:
_http://www.apple.com/usergroups/find/register/_
Joe
Similar Messages
-
Trash and user group help!
why do i need to type in password when i delete things? how do i remove it?
and i can't delete items directly from the dock as well. like opening from the downloads folder and dragging the file to trash. i have to bring open up Finder and delete from the folder directly.
another issue is that am i able to remove the gues user from my start up screen? i've already disabled it from the user groups but i still see it in my login screen.
one last problem, is it a norm to have current leakage for the MBP? i've been having frequent shocks from the 2 bottom corners of it when i plug it in to a power source. i bought it from an authorized retailer and using it in the country where i've gotten it from. i've just gotten my mbp about 3 weeks back.
thanks for replying my queries!Hi,
Yeah in ACS 3.1 its under the Shared Profile Components page. In ACS 4.1 its directly under the user groups or under SPC page.
You need to check the box for "define ip based access restriction" and deny access for all other groups to the wireless access points network device group.
ACS 3.X)
1. Denied Calling/Point of access restrictions
2. AAA Clients =UPS_PDU (Power Supplies)
3. Port = just put a * for all
4. Src IP address = just put a * as well
SUBMIT to SAVE
Create a second one for the other group like so:
1. Denied Calling/Point of access restrictions
2. AAA Clients =Routers_Switches
3. Port = just put a * for all
4. Src IP address = just put a * as well
Click submit to save it.
Go to the ACS User groups section and select the Network Administrators Group " that don't need access to the UPS's" and apply the NAR you created to that group. Do the same for the other grouping.
(ACS 4.X)
Go directly under the "user groups" and create the NAR under there. No need to go under the Shared Profile Components section
Hope this helps and let me know if you need further assistance or explanation.
Craig -
I have forgotten my password for mountain os. I have followed the instructions about going to "User group" and enetering my apple ID. It doesn't work. Can anyone help me? Thank you.
Welcome to the Apple Support Communities
https://discussions.apple.com/docs/DOC-4101 -
HELP! how do i add/create users/groups in terminal?
just got my first macbook for work and was told to install this app. in the instructions it says run these 3 commands
/usr/sbin/groupadd --system username
/usr/sbin/useradd --system --gid username groupname
chown -R user:group /usr/local/foldername
i know mac doesn't have groupadd and useradd, but i've spent over 2 hours on google and i still cant figure it out. i've done tons of dscl dseditgroup cmds all with no luck. please help rewrite these 3 lines for me in mac unix!!surrealv2 wrote:
this app.
What app is this? OS X already has dormant users for most popular software packages that need to run under a specific user. You can run "dscl . -list /Users" to see them. It would probably be easier to configure "this app" to run under one of those users. That is usually just a command line switch and the default probably works fine. -
HELP - Modify user group by bulk un CUCM 8.6
Hi guys,
I am having problem by update/modify user group on CUCM.
There are already some users within user group with admin privileges. That should be changed, so I created a group with some privileges and then I tried to change the usergroup by bulk. but the bulk ADDS the usergroup to the correct and maintain both.
After that I decided to have 2 rows, for the same user, one for the group with empty space (to delete it), and another with the new usergroup. But CUCM does not either do that. it sills maintain the user group..
Does anyone has successfully changed the user group by bulk?
I will appreciate your advices.
Update Users - Custom File
Begin Time : 04/29/2015 13:46:41
Query :
Update Users in CUCM_1L_Template.csv
Failure Details :
users Error Code Error Description
******** NO ERROR FOUND ********
Result Summary :
UPDATE for 2 USERS passed.
UPDATE for 0 USERS failed.
End Time : 04/29/2015 13:46:41
Kind Regards.
Juan Gerardo Hernandez
CCNP VoiceThat's correct, what you're seeing is WAD, this topic has been discussed plenty of times before, the only option you have is SNR
-
What is difference between user group and reference user group?
hi
guys,
what is difference between user group and reference user group?
your regards
p.sureshHi ,
Chk the link below for your clarifiacation.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/5c/c1c81c445f11d189f00000e81ddfac/frameset.htm
Hope it helps.
Regards,
Amit
Edited by: Amit Kotwani on Sep 2, 2008 2:15 PM -
Populating the user group instead of the group ID in MFA
Hello all,
I am trying to Populate the user group instead of the group ID in MFA. I want to use this to create authorization permissions, after authentication. I am running into the problem of not getting any info after authentication in the attribute dump. Are
there settings that I can change in order to Populate the attribute dump? are there settings that I can change to get all of the groups that each user is in?
Thanks,
Levi Williams
IT professonial
InternHi Levi Williams,
Thanks for posting here!
Refer to the solution in this thread link:
https://social.msdn.microsoft.com/Forums/en-US/df060757-8190-4083-a162-0876cd4b8d15/group-based-radius-return-attributes?forum=windowsazureactiveauthentication
Additional reference:
http://www.rdsgurus.com/uncategorized/step-by-step-using-windows-server-2012-r2-rd-gateway-with-azure-multifactor-authentication/
Hope this helps!
Regards,
Sadiqh -
Is there a way to pull User, Group , Other permissions of a file
I wanted to know whether Java provides any API to pull up each and every permission associated with a file.
For example: In Unix, a file has 3 sets of permissions as shown below:
<UserPermissions><GroupPermissions><Others'Permissions>
Example: -rwxrwxrwx
r - for read
w - for write
x - for execute
There are some methods provided in java.io.File, such as canRead() and canWrite(), which help in telling whether a file is readable or writable. But I did not find any API which tells whether a perticular user has read/write/execute permission or not. Also, I presume the canRead(),canWrite() methods pull up the permissions pertaining to the owner of the file, but not for the group and others part of a Unix File's permissions.
Is there a way to pull up the read/write/executable permissions for all the 3 catergories namely, UserPermissions, GroupPermissions and Others'Permissions.
I appreciate your note on this and appreciate your time too.In the java.io.File class, there's methods canRead() and canWrite().
They will test the read/write permissions of the Unix user you are running your Java program with.
They will not return a list of user names, user groups etc though.
You'd have to get the permissions through some platform specific method, eg. via JNI.
regards,
Owen -
OIM 9.1.0.2 - User group permission
Hi experts,
IHAC that need to configure some user groups in order to perform just specifics activities. We have configured the user groups but with no sucess.
1) Group that should see/track all the opened requests.
Given all request permission. (The requests don´t appear)
2) Group that should disable Resource from user thru User Detail -> Resource Profile.
Given all resource objects permission. (Error message: No permission)
3) Group that create/manage Attestation.
Given all attestation permission. (The attestation is created, but it doesn´t appear to delegated user)
Any tip on how to set the correct permission?
Brgs,Hi,
I was looking for the same questions! One of them I could make it to work...
About quetion #3, some steps:
1. Create a group with name, lets say: AttestationManagers
2. Give the following permissions:
Attestation Requests
Attestation Process Tasks
Attestation Data
Attestation Process Definitions
Attestation Process Administrator
3. Make the users responsable of attestation process part of group: AttestationManagers
4. Create an attestation process and in the last field: Process Owner, put AttestationManagers
5. Click: "Run Now"
6. This attestation should appear to the user responsable of it.
You can find an explanation about the attestation process in the following link: http://download.oracle.com/docs/cd/E14049_01/doc.9101/e14057/attestation.htm#insertedID1 and about the Process Owner, the point 15.1.1 in the above link.
I hope it helps!
Regards. -
How to only synchronize one specific LDAP user group with SAP?
Hi,
Hopefully this is the correct forum to post this in. I want to have continuous one-way synchronization of users from my LDAP server to my SAP central system. I've started configure in SAP using transaction SM59 and LDAP. Can I somewhere set that only one specific LDAP user group shall be transferred to SAP (they do not need to be assigned to any specific group, profile, role in SAP) - or should this be done on the LDAP server side (or is it at all possible)?
Correct me if I'm wrong, but the User Group field in the report RSLDAPSYNC_USER only concerns SAP user groups right? This would therefore not be sufficient since I want to select the users to synchronize based on user groups in the directory.
Thanks, OscarWe've used a repository constant to specify the LDAP filter for reading users / groups from the LDAP target.
E.g. LDAP_FILTER_USERS (&(objectCategory=person)(objectClass=user))
Then we also have a constant for the LDAP_STARTING_POINT
For our AD Group Initial Load we filter according to these settings:
LDAP_FILTER_GROUPS = (objectclass=group)
LDAP_STARTING_POINT_GROUPS = ou=IDMManagedGroups,ou=Groups,dc=cfstest,dc=le,dc=ac,dc=uk
The above example only reads AD groups starting at the specified OU
Then in a Job From LDAP Pass the LDAP URL looks like this:
LDAP://%$rep.LDAP_HOST%:%$rep.LDAP_PORT%/%$rep.LDAP_STARTING_POINT_GROUPS%?*?SUB?%$rep.LDAP_FILTER_GROUPS%
I hope this helps
Paul -
HT4798 How do I gain access to Users & Groups preferences when I cannot even log in.
I only have one apple ID linked and I cannot reset my password via the pop up box and cannot access the user groups as I cannot even log in.
Can anyone help.
Thanks
MattReset Password
OS X 10.6 Snow Leopard
Follow the instructions in second and third boxes.
Reset Password using Recovery HD
OS X 10.7 Lion /10.8 Mountain Lion
Follow the instructions in the first and third boxes.
http://pondini.org/OSX/Password.html
Note
Keychain
I don't remember my original (former) account password
https://support.apple.com/kb/HT1631 -
I'm trying to check in changes to TFS using VS2013. When I hit the submit button, TFS returns the following error, "TF14002: The identity {domain} \ {oldaccount} is not a member of the Team Foundation Valid Users group."
Background: my account name has been changed to {newaccount} from {oldaccount}. And when the sys-admins changed my account name they did not update my computer itself, so I'm still using C:\Users\{oldaccount}. I can't believe that would make a difference
but you never know....
When I first started working at this company I'm almost certain I set up my TFS Workspace with my old account. But I thought I deleted all that stuff related to my old account and reset everything to my new account (Workspaces and TFS server). My lead tech
has even shown me the account mgmnt screen with my new account name. And I've been able to check out items with my new account name.
I performed the following steps to try to "clean out" TFS:
• I copied all of my changed files to a back-up location.
• I undid all changes in TFS (note that TFS has been allowing me to check out files to edit).
• I deleted the TFS entry in Credential Manager per a suggestion online.
• I deleted my Workspace.
• I even deleted my TFS server.
• I Rebooted my computer.
• I reconnected to the TFS server.
• I rebuilt my Workspace.
• I restored my changed files from my back-up location.
At this point I tried checking-in my changes again but got the same error message as above.
Next, I deleted everything in this folder:
C:\Users\ ...\AppData\Local\Microsoft\Team Foundation\5.0\Cache
... but I'm still seeing the error.
Also, we'd been informed that a number of us need to downgrade from "Ultimate" to "Professional". I did my downgrade to VS2013 Pro (after the steps above) but I am still seeing the same error.
A comment on another question
here suggested that I shelve my changes without preserving changes locally, then un-shelve and attempt to check-in. This also did not work, I could shelve my changes and un-shelve, but doing so did not fix the original problem.
Note that I do NOT have access to the TFS server itself - much less permissions to perform any sort of admin on it (and I don't know the person who would) - but might there be a table in the TFS database that still has an entry for my old account that could
be joining to my computer name &/or new account name when TFS goes to look up my account info when I check in my changes? I am getting desperate for an answer!
Any suggestions?
Thanks,
D. KelleyHi D. Kelley,
Thanks for the details. Based on your description, you might need to change or update the SID for users. Try identity command to change the username if you never use the new username in TFS. Check this page for more information about
identities command in this
page.
You can also check the table "tbl_Identity" in the tfs_configuration database to see if the new user exists, or it has the old user. Another option is have a check on other machines to see if it works fine. Refer to links below for more information:
https://social.msdn.microsoft.com/Forums/en-US/93568425-a877-4d21-8497-1adc4561b6d3/unable-to-check-in-code-to-tfs-due-to-tf14002-the-identity-old-user-name-is-not-a-member-of-the?forum=tfsversioncontrol
https://social.msdn.microsoft.com/Forums/en-US/acc56859-624f-41bc-b698-cbb5e0b8f525/cant-check-in-code-the-identity-devoldusername-is-not-a-member-of-the-team-foundation-valid?forum=tfsversioncontrol
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Mass creation of common folders for different user groups
Hello Experts,
We are using Portal 7.0 SP12 and we have 10 different user groups created in Portal.
Based on this group structure, we need to create two common folders in each of the user's personnel documents in KM.
Is there is any way to achieve this kind of requirement ?
Can we do mass creation of these two common folders which will be assigned to all of the groups. This needs to be done in user's personnel documents and not in Public documents.
Any help in this context would be highly appreciated. points assured.
Thanks in advance,
Anil Kumar.For every user a folder is created in userhome. One approach is to capture this folder creation event and create the folder structure you need. You need to develop a portal service which will listen to events from userhome repository.
1. Capture folder creation event for user home
2. Create the folder structure you want in this event handler
Check this documentation on how to do this.
https://media.sdn.sap.com/html/submitted_docs/nw_kmc/howto/rf/client_api/rf_client_api.html
Regards,
Prasanna Krishnamurthy -
Restricting certain users groups to read only for certain folders
Hi
I'm not sure if this is the correct forum, but hey, hopefully someone might now the answer or direct me to the correct one.
I'm writing a VB program to amend ACLs for specific user groups.
Effectively, I make all prior year folders read only, whereas the default for the group is Modify, Delete etc. This means they can continue to work in the "new year folders", but historic years is List/read only.
I've got to the point the program does everything I want, i.e. stops folder creation7deletion, file & folder name changes, copying for the historic years, but does not prevent deletion of files in the folder. Effectively I set Deny access on the
historic folders.
Testing using the Windows GUI would appear to resolve the problem is I change the Deny Special Permission (for the group) from "This folder only" to "This folder & files".
Question then is how to I set this in VB, the default appearing to be "This folder only"
Here's extract of my code
Thanks
IfvarDirectoryName.IndexOf("\"&
Date.Now.Year) = -1
Then
FileAcl3.AddAccessRule(
NewFileSystemAccessRule(GroupAdmin(0),
FileSystemRights.Modify,
AccessControlType.Deny))
FileAcl3.AddAccessRule(
NewFileSystemAccessRule(GroupAdmin(0),
FileSystemRights.DeleteSubdirectoriesAndFiles,
AccessControlType.Deny))
FileAcl3.RemoveAccessRule(
NewFileSystemAccessRule(GroupAdmin(0),
FileSystemRights.ReadAndExecute,
AccessControlType.Deny))
FileAcl3.RemoveAccessRule(
NewFileSystemAccessRule(GroupAdmin(0),
FileSystemRights.ListDirectory,
AccessControlType.Deny))
Dim FileInfo3 As IO.FileInfo = New IO.FileInfo(varDirectoryName)
Dim FileAcl3 As New FileSecurity
If varDirectoryName.IndexOf("\" & Date.Now.Year) = -1 Then
FileAcl3.AddAccessRule(New FileSystemAccessRule(GroupAdmin(0), FileSystemRights.Modify, AccessControlType.Deny))
FileAcl3.AddAccessRule(New FileSystemAccessRule(GroupAdmin(0), FileSystemRights.DeleteSubdirectoriesAndFiles, AccessControlType.Deny))
FileAcl3.RemoveAccessRule(New FileSystemAccessRule(GroupAdmin(0), FileSystemRights.ReadAndExecute, AccessControlType.Deny))
FileAcl3.RemoveAccessRule(New FileSystemAccessRule(GroupAdmin(0), FileSystemRights.ListDirectory, AccessControlType.Deny))
FileInfo3.SetAccessControl(FileAcl3)
End IfHo Rohn
Your right, when I added the flags I got the following error at execution
{"No flags can be set. Parameter name: inheritanceFlags"}
I've developed a work around, which gives me exactly - subject to further testing - what I want. I simply mark each file in the relevant folders with a Deny Delete option.
I will however explore the DirectorySecurity class option, but initial review of the www seems a little shy on VB examples.
Thanks
Perry
You should be able to use FileSecurity and DirectorySecurity the same way (they have identical methods). Since this is a scripting forum, I'll provide a PowerShell example (which is fairly close to C# and VB; they all use the exact same classes):
$varDirectoryName = "c:\folder"
$GroupAdmin = "Admin Group"
$FileInfo3 = New-Object System.IO.DirectoryInfo $varDirectoryName
$FileAcl3 = $FileInfo3.GetAccessControl()
$FileAcl3.AddAccessRule((New-Object System.Security.AccessControl.FileSystemAccessRule (
$GroupAdmin,
[System.Security.AccessControl.FileSystemRights]::Modify,
([System.Security.AccessControl.InheritanceFlags]::ContainerInherit -bor [System.Security.AccessControl.InheritanceFlags]::ObjectInherit),
[System.Security.AccessControl.PropagationFlags]::None,
[System.Security.AccessControl.AccessControlType]::Allow
$FileInfo3.SetAccessControl($FileAcl3)
I could have taken a lot of shortcuts when using the enumerations, but I think keeping it verbose helps show how similar the code can be.
Does that make sense? -
What is the Advantage of creation of user group through SUGR?
Hello Masters,
As per audit requirement I have maintained user groups for different sets of users through SUGR, but I am not getting except differenciating users (based on group), is there any other advantage? Can we assign role to a user group instead of assigning to list of users or can we do any mass changes to an user group by giving only user group name.
Regards,
Nilutpal.Dear Neels,
Apart from maintaining user group for Differnciation purpose you can also take the advantage on the following sectors:
1. Follow the http://help.sap.com/saphelp_nw04/helpdata/en/ce/17533e5ff4d064e10000000a114084/content.htm link . From this you will come to know the use of user group in the authorisation area.
2. User Groups also allow segregation of user maintenance, this is especially useful in a large organisation as you can control who your user admin team can maintain - an example would be giving a team leader the authority to change passwords for users in their team.
3. The authorization user group is used in conjunction with S_USER_GROUP authorization object. It allows to create security management authorization by user group. e.g. you can have a local security administrator only able to manage users in his groups, Help-Desk to reset password for all users except users in group SUPER, etc...
In case any issue, please feel free to reply.
Regards,
Nilutpal.
Maybe you are looking for
-
II'm trying to view ipad content on tv using a composite cable but it doesn't seem to connect. Any help gratefully received
-
I am developing an ALV report where I have 3 (basic, secondary 1 and secondary 2)lists. Here can I use only one LAYOUT for all the 3 lists or I have to maintain 3 layout declarations for 3 lists. Give me one example. Thanks for your precious time. Re
-
How to update Partner function tab in ME21N Transaction
Dear Guru's, I have a requirement to call a selection screen in ME21N transaction which will show list of vendors available. the selected vendor in the selection screen should be updated with parnter function 'CR' in the Parnter function tab of ME21N
-
Revision: 12656 Revision: 12656 Author: [email protected] Date: 2009-12-08 09:45:59 -0800 (Tue, 08 Dec 2009) Log Message: Fix bug FM-257: Rename durationReached event type to complete. Also, updated unit tests to be in sync with latest changes
-
8GB late 2012 MacBook Air 512GB SSD with iTunes for Mac 12.1.0.50. Yosomite 10.10.2 This happens on movies and TV titles that have happily run before.