Users have multiple AFP connections on server?

Our server is running 10.6.7 and in Server Admin under AFP connection we are noticing users with multiple connections to server. The settings are enabled to "disconnect users after they are idle" for 60 minutes and also "allow to sleep for 4 hours" checked. I have 2 other servers with the same settings that average 60-80 connections but this server continues to average 250+ connections, many of which are multiple users from same IP address. Does anyone have ideas as to why server isn't reseting connections?

Who says the server isn't resetting connections? How do you know these connections are not active?
It's not uncommon for one user to have multiple connections to a server, depending on your sharepoint configuration. Each shared resource will consume one connection for each user. This means that if your users' home directories are on the server, as well as a group sharepoint and a public share/dropbox, then each user would have three connections. Does that cover your usage?

Similar Messages

Hi recently my MacBook pro has stopped connecting to our office Synology server automatically. I now have to Go Connect to Server etc in order to browse the file server. Clearing key chain and then readding everything hasnt made any difference. HELP

Hi recently my MacBook pro has stopped connecting to our office Synology server automatically. I now have to Go > Connect to Server > etc in order to browse the file server. Clearing key chain and then readding everything hasnt made any difference. HELP

Not sure what other tests they could run for me. I've pretty much run all the tests I can using Drive Genius and Tech Tool Pro 5. Is there anything they use that I don't know about??

Windows Users can no longer connect to Server

I have an Xserve configured to share via AFP and windows. It is running Open Directory as an Open Directory master. It is connected to a Windows Network that is worldwide, running in a specific subnet and domain. Recently, all the users I have configured on the machine have been migrated to a new Active directory server for their email accounts. I can connect and authenticate against the open directory using AFP, but can not connect using windows file sharing from a Windows computer, nor can I connect using SMB from a mac. Shouldn't the users be authenticating against the Xserve when trying to connect or is it passing off the authentication to another server? Do I need to move the Xserve to the new domain? (in other words, do I have to change its FQDN? )
thanks in advance,
Mike
XServe Dual 2GB G5 Mac OS X (10.3.4) Windows Domain member

I just had this same problem on my server. The only difference is it is an Xserve insted of a Mac Mini.
I restarted the whole operating systems and that appeard to have fixed the problem but I do not know what I cause was.
Did you figure anything out?

Is it possible to have multiple emails on one server?

As the topic says, can i have more then one email service running off of the same server.
example:
[email protected]
and also
[email protected]
I have both domain names and have different websites for the different business. I need to give @something.us to some people and @somethingdifferent.com to others......
Thanks!
Adam

Yes, it's possible to do, but non trivial.
It's easier if every username exists in both domains (e.g. [email protected] is the same person as [email protected]), but it's still possible to do if they're different.
There are two approaches to doing it. Which one you use is up to you.
The first is to use Open Directory and add the email addresses as additional usernames for each account.
For example, you may have a user 'joe' who exists in domain2, so you'd give him the shortnames 'joe' and '[email protected]'. User 'bob' in domain 1 would have the shortnames 'bob' and '[email protected]'.
Note that both users exist in the main directory domain, which could be an entirely different domain.
The second method is the pure Postfix method and involves configuring postfix on the command line to support multiple domains. You'll essentially build a text file list of the names in the secondary domain(s) and will maintain this separately from the main server GUI tools. This optioni s covered in some depth in the Postfix Virtual Domains page.

Can I have multiple clouds connected to one id?

I have 5 phones and several iPads connected to one id and sharing one cloud. We share music and contacts however, when one phone rings, all phones ring. When one of us is texting, we all can see who is being texted but can't read the text. Is there anyway to unlink the phones AND still share music on this id?

Welcome to the Apple Community.
You can all share an ID for iTunes, but all have your own ID for iCloud.

How to prevent this: When I have an RDP connection to server and it is idle then I come back to it, it looks like I got kicked out but I'm not

Hi,
I have this situation: Say that I am RDP to a Windows server 2008 at least. I noticed that when I have an RDP session and I stopped working (idle) but still logged in, then I come back to it, the RDP session goes away as if I just got kicked out.
However, when I logged in again, I'm back to my session.
I looked at my GPO and I don't have anything set that relates to Terminal Session.
What is it and how do I fix this so I don't get kicked out?

Yes, set it to 1. You do not want to set it to 15 minutes or longer because that will most likely not fix the issue you are seeing. NAT Firewall timeouts are the most frequent cause of this issue,
and they are often set to 10-15-20 minutes by default.
I forget exactly, but I think in practice it will actually be 5 minute intervals when it is set to 1. The reason I said what I did is I didn't want to tell you it means minutes (which is what it means) and then you test it and realize that it is not
sending the keep alives at 1 minute intervals. If I remember correctly you can get lower by setting it to other intervals, for example, setting it to 2 would actually be more frequent than setting it to 1, but because I have noticed it stop working when
using the other intervals I recommend you set it to 1, which is the default.
Additionally, the exact behavior of the keep-alive may vary depending on the precise version, service pack, hotfixes that you are running.
The above is the longer explanation. Again I recommend you enable it and leave it at default of 1 and make sure to restart your server so the change takes effect.
-TP

Your device have a problem connecting to server

Please help! I had mi gmail email account sync with my BB. I had to change my password due to security issues and I also changed the password in the BB. I tried also to set another email account from yahoo, but nothing is working. I took out the battery about 5 mins, but I cannot configure any email account! This is the first time since2010 this happens! Pleae advise...

Hello wpalerm
Welcome to BlackBerry Support Forums
If you're having problem in adding an email using email setup option then use your BlackBerry browser and browse to www.blackberry.com/integrate to add/ edit any email account.
Try it and let see if it works.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Can we have multiple database audit specification on a single server audit ?

Hi,
We are having a 2 node Sql Clustered instance of SqlServer 2008 R2 Enterprise running
on windows server 2008 R2. We have about 88 databases in the instance.
Our servers run on Intel Xeon(R) CPU X5670 @2.94 GHz with 6 cores(12 logical processor).
The servers are having 12GB of RAM.
We are planning to introduce database level audit to find if there is any activity on
some of our databases. These databases are not growing in size and there is a request
from the application team to ascertain whether the endusers are accessing the database
over a period of time. In this context I have 2 queries-:
1)Can we have multiple database audit specification on a single server audit ie can we
audit multiple databases to find out the user activity on those databases at a time? Or
should we a separate server audit for each database audit specification?
2)We plan to have the target of the audit on a file on the same shared volume(lun) where
the MDF file and LDF files are located(in EMC storage) and in this context what performance
monitor counters should we watch to ascertain whether there is any performance degradation
due to introduction of server audit.
Thanking you in advance
Binny Mathew.

As Auditn is at the SQL Server instance level. You can have multiple audits per SQL Server instance.
http://msdn.microsoft.com/en-us/library/cc280386.aspx
Database Audit Specification
The Database Audit Specification object also belongs to a SQL Server audit. You can create one database audit specification per SQL Server database per audit.
The database audit specification collects database-level audit actions raised by the Extended Events feature. You can add either audit action groups or audit events to a database audit specification. Audit events are
the atomic actions that can be audited by the SQL Server engine. Audit action groups are predefined groups of actions. Both are at the SQL Server database scope. These actions are sent to the audit, which records
them in the target. Do not include server-scoped objects, such as the system views, in a user database audit specification.
Database-level audit action groups and audit actions are described in the topic SQL Server Audit Action Groups and Actions.
You can also consider using a Profiler trace file to capture the events.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Network Drives Losing Connection from Server 2012 to Windows 7 64bit Machines

I have about 20 users at my facility and recently upgraded our server from one running server 2003 to one running server 2012. Since that occurred, I have had numerous issues that I did not encounter on the old server.
Lately, users have been losing connection to the shared network drives randomly and constantly. The drives will come back on-line on their own but it could be 2 minutes or 30 minutes before they do and when users are in the middle of working on a document
from the network, they are unable to save until the drive comes back. Manually disconnecting and re-mapping them works sometimes but then the problem will re-occur. I have tried re-doing the shares and security settings and run a couple of supposed hotfixes
on the client side and the server side to no avail.
Now our regional office is suggesting that I re-connect the old server and then rebuild the new one with server 2008 r2, something I would like to avoid if possible.
I feel like this is a simple setting that I am missing, no conditions have changed except for the new server.
The server is a Intel Xeon CPU E5-2609 2.40GHz with Server 2012 64 bit on it. All computers (except on on 32 bit) are running Windows 7 Enterprise edition 64 bit.
Please help.

I made this change to the registry on the server and am waiting to see if I have any more drops.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters
Value:
autodisconnect
Data
type : REG_DWORD
Value:
ffff (Hex)
There was a client side change suggested but I am missing that value for the client side change and others in the organization who don't have it are not experiencing this problem.

Got Connect to Server to work again, file sharing 4.9 to 10.1.5!!!

Folks:
Have a number of unanswered questions lost on this forum, and been following as many of the threads pertaining to file sharing as possible--and finally pieced some of the suggestions, mostly from BDAqua, together and got the two units to connect. Before this I got "Log In Failed" or "Connection failed" error windows. Haven't had time to actually move files, but I did open some JPEG's from the 10.1 computer in the 10.4.9 . . . what got it working doesn't totally make sense--but it worked.
When I first posted my issue after erase & upgrade from 3.9 to 4.9 BD asked me if I had another User in account to do some testing with--and I said yes, but what will that do? And he said, ah, you could test things . . . wasn't real encouraging--I think I logged into one new account and tried to connect and it FAILed. Went on to the "roll the AppFileServer kext back to 4.8 version--didn't work. Kept whining--eventually everybody stopped replying. Then I saw another comment by BDAqua answering someone about some issue with having the same user name when trying to use File sharing; that was awhile back.
Today--put those ideas together and logged both computers into the other user and then used Connect to Server, entering IP address--got the Log In window--put password in and--IT CONNECTED, but only to a "Drop Box" folder that I didn't have "privileges" to open. Following another thread's idea I changed both of those accounts to "allow user to administer computer" in Acounnts. In Tiger I had to log back into the main account to do that--and then I tried to connect, and that time it worked. The most important thing is having another user name to enter--and then I could get access to the HD of either computer. Still some things to work on--going from the iBook to the iMac I can open all files, going from the iMac back to the iBook I can mount the HD, but some of the original files in my Home folder have red minus's and can't be opened. What was odd is that both of my other user accounts have the same name/password, but I could connect; but couldn't with the main accounts--having the same name/password. When I changed those extra accounts into admin also and then logged back into main accounts--I connected by using the name/password of the OTHER account in the second computer.
The Key is as BD "recalled seeing somewhere" that the User name should be different, so you can use another account on that computer. In Panther it didn't matter if both computers had the same name--in Tiger apparently it does. Hope this helps--took me a lot of messing/time to bring all the details together--1.5 months. A head's up from Apple might have been--nice???
eep
iBook G4, 14, 933 MHz, Mac OS X (10.4.9) iMac G4, 15, 800MHz, (10.1.5)

Rick/BDAq:
Verbosity doesn't really begin to cover it--that was the short version of the process. 1.5 months ago had 15 posts--100 posts later a solution was developed. Don't know if rolling back the kext to 4.8 is needed--won't get a chance to try doing a full install of 4.9 + Security update on my Ext HD to test what is really necessary. Or whether it is necessary to make the New Account an administrator or not; when they connected it was so surprising and so simple. I'd like to find the thread where it shows how to change the original User Name for the admin/computer & see if that is all that is needed. Like all creative people I named my units after me, my name. Now I'd like to change one to be "Johnny" or I'll name it "Tiger" after all the fiddling it's taken to find such a simple solution--I've grown attached to my OS. : - 0
Haven't had the chance to check the link to Hornware--thanks Rick, but Firefox couldn't find the server. BD--thanks for being there, buddy.
eep

Establishing multiple WLEC connection pools

Running WLS 6.0 communicating with WLE 4.2:
I'm looking at setting up multiple connection pools to communicate with multiple
WLE application domains.
The code fragment below is from the BEA documentation and works fine if you know
the domain(pool) name. My code uses the "lookup" method in the InitialContext
class to get the pool name for single WLEC pool/domain configuration. Is there
a method to return a list of domain(pool) names?
Each WLEC connection pool has a Tobj_Bootstrap object that lets you access the
associated WLE domain. The WLEC component provides an object called BootstrapFactory
which provides access to the Tobj_Bootstrap object for a particular WLE domain.
Include the following code in your WebLogic Server client to connect to a WLE
domain:
Tobj_Bootstrap myBootstrap = Tobj_BootstrapFactory.getClientContext("myPool");
where
The getClientContext() method returns the Tobj_Bootstrap object that is associated
with myPool. If getClientContext() cannot find a WLEC connection pool with this
name, it returns null.
myPool is the name of a WLEC connection pool for the desired WLE domain. This
WLEC connection pool needs to be defined in the Administration Console.

Well ... It boiled down to ACLs.
"Sreeram" <[email protected]> wrote:
>
Hi
I have WLI application ( 7.0 ) and another J2EE appliction configured
on WLS (
7.0 ). If I have multiple jdbc connection pools configured to access
different
( or even the same ) databases, I am unable to get the connection to
execute a
sql query in the J2EE app. The connection pool gets initialized properly
during
the server startup and I can see them in the console but when I try to
acquire
a connection from the pool for execution of a jdbc stmt, I am unable
to obtain
a connection. Did any one succeed in configuring mulitple jdbc connection
pools
and WLI and another J2EE app to run together on WLS 7.0? Any suggestions
are welcome.
Thanks
Sreeram

Multiple JDBC connection pools

Hi
I have WLI application ( 7.0 ) and another J2EE appliction configured on WLS (
7.0 ). If I have multiple jdbc connection pools configured to access different
( or even the same ) databases, I am unable to get the connection to execute a
sql query in the J2EE app. The connection pool gets initialized properly during
the server startup and I can see them in the console but when I try to acquire
a connection from the pool for execution of a jdbc stmt, I am unable to obtain
a connection. Did any one succeed in configuring mulitple jdbc connection pools
and WLI and another J2EE app to run together on WLS 7.0? Any suggestions are welcome.
Thanks
Sreeram

Well ... It boiled down to ACLs.
"Sreeram" <[email protected]> wrote:
>
Hi
I have WLI application ( 7.0 ) and another J2EE appliction configured
on WLS (
7.0 ). If I have multiple jdbc connection pools configured to access
different
( or even the same ) databases, I am unable to get the connection to
execute a
sql query in the J2EE app. The connection pool gets initialized properly
during
the server startup and I can see them in the console but when I try to
acquire
a connection from the pool for execution of a jdbc stmt, I am unable
to obtain
a connection. Did any one succeed in configuring mulitple jdbc connection
pools
and WLI and another J2EE app to run together on WLS 7.0? Any suggestions
are welcome.
Thanks
Sreeram

Multiple DataBase Connection in a Single Form

hi all
Is it Possible to have Multiple Database Connection With a Single Form
Block a : Retriving data from a database Service a/Schema A.
Block b : Retriving data from a Remote Database Service b / Schema B.
If yes how to do this.
regards
jai
email:[email protected]

Sure you can access a database this way,
but can you base a block on this database connect? No you can't.
Frank

Multiple http connection

is it possible for me to make multiple http connection to server?
I'm trying to send data for about 40kb, i send the data into 80 parts ( a part about 500 bytes)..
is it possible to make about 80 thread in the same time??
I do this way to reduce time consumption...
Help me please..

No, in this case, more threads will most likely slow down the data transfer:
- more threads means more TCP connections, means more overhead
- CPU scheduling will make it slower than using one thread, they can't work symultanious anyway
- One thread is probably already capable of fully filling the network bandwidth with data

I cannot get my ipod touch to re activate after updatingit keeps saying could not connect to server

Cannot get ipod touch to activate on itunes servet

Try here:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
Also some users have said change the DNS server to Google's 8.8.8.8 and 8.8.4.4 also worked.
Using Google Public DNS - Public DNS — Google Developers

Users have multiple AFP connections on server?

Similar Messages

Maybe you are looking for