Users Locked after Patch Upgrade

Hello,
After a patch update all users locked .. how to find the reason ..
Thanks,
DereK

Hi DereK,
Please check the below documents : -
http://www.sapfans.com/forums/viewtopic.php?f=24&t=19370
http://help.sap.com/saphelp_nw04/helpdata/en/c4/f01241c738f423e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/0a/065e4278636255e10000000a155106/frameset.htm
Hoe it helps
Regards
Arun

Similar Messages

Null Exception in Family Iview after Patch Upgrade

Hello
We have SAP XSS installed on our production portal.
following was the composition.
SAP_ESS 603 SP3
SAP_MSS 600 SP16
SAPPCUI_GP 603 SP3
recently we upgraded patch level to
SAP_ESS 603 SP7 (1000.603.0.7.4.20110124060804)
SAP_MSS 600 SP18 (1000.600.0.18.0.20100830054638)
SAPPCUI_GP 603 SP7 (1000.603.0.7.0.20100914080506)
as per the link [https://wiki.sdn.sap.com/wiki/display/ERPHCM/HOWTOGETRIDOFSPSTACKMISMATCHISSUES] and SAP note 1521297
Backend patches remain the same viz
EA-HR Release: 604 ,level : 011
Now when we try to test the Personal Information Iview it gives us the following error
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Access via NULL object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
Note: We have already implemented note no 1018036 which reports the above issue.Jcos are working fine , SSo is properly established and User remains valid.
Thanks
Surender Dahiya

Hi,
The logs from ST22 as as follows:
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component.
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
Other ESS applications are working fine.Issue is in Family application.Server is also restarted after patch upgradation.
Please suggest.
Thanks,
Surendra

IPAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore

PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore. Just get an Apple Logo then a flashing blue screen as if it is caught booting up. This has happened twice before and iTunes restore fixed it. But this time device not appearing in iTunes.
Running iTunes for PC. But as stated restore has worked before! Any help greatly appreciated!!

Place the device in DFU mode and let iTunes restore the device to factory condition.

After patch upgrade in 11g Not able to see current patch

Hi Experts,
After upgrading the patch upgrade through MOPatch from 11.2.0.2.0 to 11.2.0.2.4 , I can see the log as succeeded .
But when I am connecting through sqlplus / as sysdba the version is still showing as 11.2.0.2.0 . Have I missed something I used the readme file README_201111_AIX which is downloaded with this patch.
I have to also add one more fix_control after patch upgrade that means system is reading the right patch. So, Please suggest how to check this .
Thanks in Advance.

Hi,
My output is :-
Oracle Database 11g                                                  11.2.0.2.0
There are 1 products installed in this Oracle Home.
and also I can see the following that today these much patches installed successfully I am giving some example below :-
Patch 10149919     : applied on Thu Dec 08 05:22:25 EST 2011
Unique Patch ID: 14146533
   Created on 3 Oct 2011, 00:42:46 hrs PST8PDT
   Bugs fixed:
     10149919
   This patch overlays patches:
     12827726
   This patch needs patches:
     12827726
   as prerequisites
Patch 10188865     : applied on Thu Dec 08 05:22:11 EST 2011
Unique Patch ID: 13551988
   Created on 21 Mar 2011, 03:16:39 hrs PST8PDT
   Bugs fixed:
     10188865
Patch 10190759     : applied on Thu Dec 08 05:21:56 EST 2011
Unique Patch ID: 13109839
   Created on 11 Nov 2010, 20:29:55 hrs UTC
   Bugs fixed:
     10190759
Patch 10243045     : applied on Thu Dec 08 05:21:45 EST 2011
Unique Patch ID: 13169052
   Created on 23 Nov 2010, 02:40:01 hrs PST8PDT
   Bugs fixed:
     10243045
Patch 10357961     : applied on Thu Dec 08 05:21:38 EST 2011
Unique Patch ID: 13814186
   Created on 6 Jun 2011, 06:16:52 hrs PST8PDT
   Bugs fixed:
     10357961
But if the patches applied is 11.2.0.2.0 will not change to 11.2.0.2.4 or it will only change after applying patchset.
Thanks in advance.

Why my iphone get lock after i upgrade to ios5

why my iphone has been locked after i upgrade to ios 5??? i don't understand that specially i didnt buy it under contract with AT&T i buy it in cash from USA

Doesn't matter if you bought is without a contract. This does NOT mean it was unlocked. Clearly, you bought a phone that was hacked to work with another carrier besides AT&T. Now that you've upgraded, your phone is relocked to AT&T as it should be.
AT&T does NOT unlock their phones. Ever.

Adjustment Modifications after Patch upgrade?

Hello,
Is it possible that the Modifications Adjustments (done in SPAU and SPDD and occured due to SAP_BASIS and SAP_ABA patches) be carried out after the patches upgrade?
To be more clear, instead of Adjusting the Modifications while patch upgrade is in progress can i configure the patch upgrade in SPAM transaction someway that the Modification Adjustments is directly shown to the user upon their login after my patch upgrade?
Regards,
Vasu

Hi Vasu,
Yes you just need to transport the request to next system.
Than you don't need to redo the adjustment.
But some time due to incosystency between the system, you still get some object not adjusted after you apply the request, and for this you need to transport the object from your development or direct adjust.
After 12 days than when you change the object, SAP will ask you for the object key, and you need to request the key in SAP MarketPlace before you can change the object.
Regards,
Fendi Suyanto

Safari misbehaving with fast user switching after Mavericks upgrade

Anybody else have this problem with fast user switching?
Since upgrading to the worst OS upgrade in history, not only have I lost TB's of data from my external drives, but Safari is behaving like a spoilt brat when fast user switching is used.
If I leave safari windows open and switch users, then switch back, the Safari windows are collapsed to about a tenth of their normal height and stuck in the top left of my screen. When I say stuck, I mean that if I attempt to move them, they snap back.
The best part is, it's not consistent, so I can't reproduce it at will.

I have a 2014 BTO 27 inch iMac and I have the same problem with open windows being locked to the top left/right of the screen and just a fraction of their previous size after switching to other users and then switching back. In addition if an open window is not bugged into either of the top corners it may still get re-sized
Due to screen backlight issues, I went through being shipped (and returning) 3 BTO iMacs before settling with this current one and each of those iMacs had the same fast user switching bug. This leads me to think that a re-install will not neccessarily solve this issue as I am assuming that the BTO iMacs they shipped to me from China were brand spanking new. We see this behaviour with Safari, Chrome, Mail, iCal, and iTunes since these are the apps that we commonly leave open. We do not have these as full screen apps either, just open windows.
It is very easy to replicate this bug. Open a few of the above mentioned apps, and then switch to another user; I'm guessing even the guest user will do if you have no other users on your system. Switch back to the first user and more than likely one or more of the windows will be anchored at the top left or right of the screen, depending on where the window was initially. As stated by a few other users above, this doesn't always happen but switch users a couple of times and it is bound to happen before long.
Curiosly when my windows are anchored on the left after switching users, the upper edge of the window is hidden BEHIND the menu bar. If I pull the window down it appears that the red button is off screen to the left and only that portion of the window to the RIGHT of the amber button is visible.
When the windows are anchored to the right they are BELOW the menu bar, and only the red and amber buttons are visible and only that part of the window to the LEFT of the amber button is visible.
In both cases it seems the amber minimise button is the window cut-off point.
You wonder how they could have broken this feature since ML and much worse, still not have it fixed 3 months later.

Cross system object lock after SP24 upgrade

Hi Team,
We have recently updated from Sol Man SP23 to SP24. I have set-up cross system object lock (CSOL) in SP23. It was working perfectly.
When we are in SP23, i have made following settings:
In T.code: u201C/TMWFLOW/CONFIG_SERVICESu201D , i have set he conflict analysis as "Cross-Project, Cross-Client". So i that i will always get "Warning" Messge while processing SDHF and SDMJ correction.
In t.code: /n/TMWFLOW/CMSCONF , the CSOL is active.
Recently we have upgraded to SP24. After SP24 upgrade, the CSOL is not working properly. The configurations are same as earlier.(Before SP24). Now if i process SDMJ or SDHF corrections, the CSOL always gives me "ERROR" message but i want to get "WARNING" message as earlier. I have checked the conflict analysis in t.code u201C/TMWFLOW/CONFIG_SERVICES". It is still "Cross Project, Cross-Client" only.
Any additinal SAP notes to be implemrnted to correct this behaviour.
Your valuable guidance required.
Thanks
Kumar

I dont believe this is possible at the moment. As you must be already aware, that SAP releases the locks from the objects as soon as the transport request is released from the Development System. Unless, this locking mechanism is extended to various systems first (DEV and QAS) and later to parallel landscapes (eg:- Project landscapes) it would be difficult to bring in this feature.
Rgds,
Abhijeet Bhagat

Update Customized LKM after patch upgrade

We currently have over 100 interfaces that use a customized version of a default LKM,CKM and IKM. We are going to implement a patch upgrade over the weekend which includes new versions of the LKM,CKM and IKM. How do we apply the new versions to the 100 interfaces?
The customization that we had done was to modify the some of the options. When we receive a new version how do we apply the new KM with the customized options to all the interfaces?
Thank you in advance.

Best paractise is always to dulicate then modify the new KM, not to modify the original KMs. This allows you to deal with the issues which arise when new KMs are released which contain new functionality you'd like to get.
I suggest that your best approach is to import the new KMs, modify them with your changes, then export them. Next do an IMPORT REPLACE on your KMs with the modified version of the new ones. Now all you have to do is to re-generate the interfaces which use the KMs.

Cannot select serial number after patch upgrade to PL 27

Hi,
We have just upgraded to PL 27. As all the items are managed by serial number, we find that we are unable to select certain serial number when we are performing deliveries, return or invoicing. The funny thing is not all the serial number are affected. For example, out of 10 available serial number, 2 can be selected and the rest cannot.
Any idea what causes it?
Regards,
TWP

Hi,
We are also facing the same issue when we try to upgrade the patch level to PL27 for one of our client. After few days of testing we found out that it seem to be a major bug in PL27 where by you will not be able to select most of the serial number after you sort the serial number table. You might need to try with different user or create another user which haven't apply the sorting as a temporary workaround method because we have try to remove the sorting but it cant be done. Thus, we create/try with different user without applying the sorting and it worked. To fix the issue permanently, you will need to revert the issue to SAP.
Regards,
cakong

Query performance after patch upgrade

Hi All,
We were earlier on SP17 and then upgraded recently to SP23. It was after this that we started noticing few anomalies. This includes really long runtime to run queries (more than 2 hours). This earlier (before upgrade) used to run in hardly 2 mins for the same selection criteria. This happens with majority of queries.
Let me elaborate this a little further. I have a very important sales query which is being used by many endusers all across India. This query has the following parameters as the selection screen. -
a) Division (mandatory)
b) Plant (mandatory)
c) Sales Office (mandatory)
d) Material (optional)
e) Fiscal year period range : <Starting Fiscal period> to <Ending Fiscal Period> (Mandatory)
Usually this report is run for 4 & 5 series materials. Hence normally users enter the following criteria while running this query-
Division - 03
Plant - L501
Sales Office - L003
Material - 400000 to 599999
Fiscal Year period range : YTD Range.
To run this report it takes more than 2 hours. Now say for instance this report is run and it brings in 50 materials. I export the list of these 50 materials and then run the same query again for the same criteria except this time, I execute the report not for material range of 4 & 5 Series but only for these 50 materials specifically. This then takes 2 Mins.
The problem is that we cannot expect all the users to do this. Has anybody faced this issue earlier. I request assistance in resolving this problem.
Regards,
Sree

One further observation.
When the report is not executed for any material (i.e. the material values are kept blank in the selection screen itself), then the report runs in like 2 mins again (the other parameters are kept the same as mentioned in the above message).
Can anyone put some light into this.
Regards,
Sree

No STAR_TRANSFORMATION hint after patch upgrading

Hello! After upgrading patches
SAPKA64016 -> SAPKA64019
SAPKB64016 -> SAPKB64019
SAPKIPYJ66 -> SAPKIPYJ69
SAPKW35016 -> SAPKW35019
we have problems with STAR_TRANSFORMATION hint. For example, in this SQL query we've got no STAR_TRANSFORMATION, and have greate problems with performance.
SELECT   /*+ FACT( T_00 ) */
         t_01."SID_0CALDAY" "S____012", t_02."SID_X_CLSACT" "S____635",
         t_03."SID_X_NPACC" "S____997", t_04."SID_X_CODEAC" "S____1866",
         t_05."SID_X_SSTATUS" "S____1873", COUNT (*) "1ROWCOUNT"
    FROM "/BIC/FX_CARDS02" t_00,
         "/BIC/DX_CARDS02T" t_01,
         "/BIC/DX_CARDS029" t_02,
         "/BIC/DX_CARDS022" t_03,
         "/BIC/DX_CARDS028" t_04,
         "/BIC/DX_CARDS025" t_05,
         "/BIC/DX_CARDS02P" t_06
   WHERE (t_00."KEY_X_CARDS02T" = t_01."DIMID")
     AND (t_00."KEY_X_CARDS029" = t_02."DIMID")
     AND (t_00."KEY_X_CARDS022" = t_03."DIMID")
     AND (t_00."KEY_X_CARDS028" = t_04."DIMID")
     AND (t_00."KEY_X_CARDS025" = t_05."DIMID")
     AND (t_00."KEY_X_CARDS02P" = t_06."DIMID")
     AND t_06."SID_0RECORDTP" = 0
     AND t_06."SID_0REQUID" <= 22090
GROUP BY t_01."SID_0CALDAY",
         t_02."SID_X_CLSACT",
         t_03."SID_X_NPACC",
         t_04."SID_X_CODEAC",
         t_05."SID_X_SSTATUS"

Hi,
sorry didn't see it before... it looks good.
[hope you aren't deactivating the optimizer in RSRT...]
Do you have your parameter maintained in the INIT<SID>.ORA file?
Are you using this file by the way or a server file to apply the ORA paramters (check this with your ORADBA group)?
Verify the optimizer parameters; this is what I have if it can help...:
OPTIMIZER_FEATURES_ENABLE                   9.2.0
OPTIMIZER_MAX_PERMUTATIONS                  2000
OPTIMIZER_MODE                              choose
_OPTIMIZER_JOIN_SEL_SANITY_CHECK            true
_OPTIMIZER_OR_EXPANSION                     DEPTH
hope this helps...
Olivier.

NWDI Components not available after patch upgrade

Hi,
After upgrading patch 11 to 13 the existing components are not available in the track. What could be the reason for this?
Thank,
Padmanaban

Hi,
As I mentioned before the SCs cannot get away from the CMS track definition unless they are deleted manually. Is it the problem with the required SCs or Developed SCs?
You can also check in the CMS who has saved the track last and then consult them if they did any manual deletion?
What about CBS? If you are not able to see it in CMS then I am sure you cannot have the respective buildspace there as well. But if you see it in CBS and not in CMS, then it is strange.
One more way is --> If you see the content/SCs(Developed SCs) in the corresponding DTR, then you can add the SCs again to CMS track definition, this will create the buildspace for those SCs in CBS if they are missing.
Akshatha

Inactive authorization objects after patch upgrade

Hello all,
I've upgraded the version of all the patches of my 4.6C system, but I've a problem.
Now, I can see by PFCG t-code that a group of roles have objects of authorization inactive and I cannot remove and add again in the role.
A strange thing because if I go to SU25 t-code and I revise all the roles affected by the patches (specially one of the affected), I see the role fine but waiting to be adjusted. If I try to adjust the role by this transaction, the result is unsuccesful. I go after this to PFCG transaction and the objects are inactive.
Is strange, it seems that I've the role duplicated, in PFCG transaction I see the "bad" role with inactive objects and in SU25 transaction I see the "good" role waiting to be adjusted.
Anyone knows what's my problem ??
Thanks in advance.
Regards,
Albert Plaza

Hello,
thanks for the answer.
I've executed the report and I've 4 or 5 roles with duplicated authorizations, but neither of them are my roles with objects inactive.
Anyway, I don't know that's my problem.
I would like to know if it's normal to see my role different by PFCG and SU25 and if anyone know how fix it.
That's really strange !!!
Regards,
Albert

Oracle database not getting Up after patch upgrade

Hi,
I have upgraded my oracle database from 10.0.2.1 to 10.0.2.4. after this databse is not coming up. I am able to start/stop listner but while starting SAP it is not able to start databse. Pasting error log below.
Wed Jun 24 14:56:45 PDT 2009
LOGFILE FOR STARTING ORACLE
Trying to start CRD database ...
Wed Jun 24 14:56:45 PDT 2009
checking required environment variables
ORACLE_HOME is >/oracle/CRD/102_64<
ORACLE_SID   is >CRD<
Wed Jun 24 14:56:45 PDT 2009
check initora
Wed Jun 24 14:56:45 PDT 2009
check initora
Wed Jun 24 14:56:45 PDT 2009
checking V2 connect
TNS Ping Utility for Linux: Version 10.2.0.4.0 - Production on 24-JUN-2009 14:56:45
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
/usr/sap/CRD/SYS/profile/oracle/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP) (HOST = CRM) (PORT = 1527))) (CONNECT_DATA = (SID =
CRD) (GLOBAL_NAME = CRD.WORLD)))
OK (0 msec)
tnsping: V2 connect to CRD
Wed Jun 24 14:56:45 PDT 2009
Connect to the database to check the database state:
R3trans: connect check finished with return code: 12
Database not available
Wed Jun 24 14:56:45 PDT 2009
Shutdown database
First trying to shutdown the database - May be,
the database is in the nomount or mount state
Wed Jun 24 14:56:45 PDT 2009
starting database
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Jun 24 14:56:45 2009
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1224736768 bytes
Fixed Size                  2083560 bytes
Variable Size             620758296 bytes
Database Buffers          587202560 bytes
Redo Buffers               14692352 bytes
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forced
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
Wed Jun 24 14:56:53 PDT 2009
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
    Notify Database Administrator.
/usr/sap/CRD/SYS/exe/run/startdb: Terminating with error code 12
thanks,
Bhanu

Hi,
I have tried to start and stop oracle from SPLplus but no luck. i am pasting alert log file which is saying some block courruption......
Starting up ORACLE RDBMS Version: 10.2.0.4.0.
System parameters with non-default values:
processes                = 80
sessions                 = 96
event                    = 10191 trace name context forever, level 1
sga_max_size             = 1224736768
shared_pool_size         = 587202560
shared_pool_reserved_size= 57982058
filesystemio_options     = setall
control_files            = /oracle/CRD/origlogA/cntrl/cntlrCRD.dbf, /oracle/CRD/origlogB/cntrl/cntrlCRD.dbf, /oracle/CRD/sapdata1/cntrl/cntrlCRD.dbf
control_file_record_keep_time= 30
db_block_size            = 8192
db_cache_size            = 587202560
compatible               = 10.2.0
log_archive_dest         = /oracle/CRD/oraarch/CRDarch
log_buffer               = 14246912
log_checkpoint_interval = 0
db_files                 = 254
log_checkpoints_to_alert = TRUE
dml_locks                = 4000
undo_management          = AUTO
undo_tablespace          = PSAPUNDO
undo_retention           = 43200
recyclebin               = off
remote_os_authent        = TRUE
remote_login_passwordfile= EXCLUSIVE
job_queue_processes      = 1
background_dump_dest     = /oracle/CRD/saptrace/background
user_dump_dest           = /oracle/CRD/saptrace/usertrace
core_dump_dest           = /oracle/CRD/saptrace/background
optimizer_features_enable= 10.2.0.1
sort_area_size           = 2097152
sort_area_retained_size = 0
db_name                  = CRD
open_cursors             = 800
optimpeek_user_binds   = FALSE
pga_aggregate_target     = 773094113
workarea_size_policy     = AUTO
statistics_level         = typical
PMON started with pid=2, OS id=25204
PSP0 started with pid=3, OS id=25206
MMAN started with pid=4, OS id=25208
DBW0 started with pid=5, OS id=25210
LGWR started with pid=6, OS id=25212
CKPT started with pid=7, OS id=25214
SMON started with pid=8, OS id=25216
RECO started with pid=9, OS id=25218
CJQ0 started with pid=10, OS id=25220
MMON started with pid=11, OS id=25222
MMNL started with pid=12, OS id=25224
Wed Jun 24 15:06:19 2009
ALTER DATABASE   MOUNT
Wed Jun 24 15:06:24 2009
Setting recovery target incarnation to 1
Wed Jun 24 15:06:24 2009
Successful mount of redo thread 1, with mount id 182910572
Wed Jun 24 15:06:24 2009
Database mounted in Exclusive Mode
Completed: ALTER DATABASE   MOUNT
Wed Jun 24 15:06:24 2009
ALTER DATABASE OPEN
Wed Jun 24 15:06:24 2009
Beginning crash recovery of 1 threads
parallel recovery started with 2 processes
Wed Jun 24 15:06:24 2009
Started redo scan
Wed Jun 24 15:06:24 2009
Completed redo scan
1 redo blocks read, 0 data blocks need recovery
Wed Jun 24 15:06:24 2009
Started redo application at
Thread 1: logseq 16126, block 2, scn 1104239482
Wed Jun 24 15:06:24 2009
Recovery of Online Redo Log: Thread 1 Group 2 Seq 16126 Reading mem 0
Mem# 0: /oracle/CRD/origlogB/log_g12m1.dbf
Mem# 1: /oracle/CRD/mirrlogB/log_g12m2.dbf
Wed Jun 24 15:06:24 2009
Completed redo application
Wed Jun 24 15:06:24 2009
Completed crash recovery at
Thread 1: logseq 16126, block 3, scn 1104259484
0 data blocks read, 0 data blocks written, 1 redo blocks read
Wed Jun 24 15:06:25 2009
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=16, OS id=25232
Wed Jun 24 15:06:25 2009
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=17, OS id=25234
Wed Jun 24 15:06:25 2009
Thread 1 advanced to log sequence 16127 (thread open)
Thread 1 opened at log sequence 16127
Current log# 3 seq# 16127 mem# 0: /oracle/CRD/origlogA/log_g13m1.dbf
Current log# 3 seq# 16127 mem# 1: /oracle/CRD/mirrlogA/log_g13m2.dbf
Successful open of redo thread 1
Wed Jun 24 15:06:25 2009
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Wed Jun 24 15:06:25 2009
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
Wed Jun 24 15:06:25 2009
ARC1: Becoming the heartbeat ARCH
Wed Jun 24 15:06:25 2009
SMON: enabling cache recovery
Wed Jun 24 15:06:25 2009
Errors in file /oracle/CRD/saptrace/usertrace/crd_ora_25226.trc:
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Wed Jun 24 15:06:25 2009
Error 704 happened during db open, shutting down database
USER: terminating instance due to error 704
Instance terminated by USER, pid = 25226
ORA-1092 signalled during: ALTER DATABASE OPEN...
Thanks,
Bhanu

Users Locked after Patch Upgrade

Similar Messages

Maybe you are looking for