Users logged in after 8 and before 6 for the past year

Hi
I have been asked by audit to provide a list of users who have logged into ECC6 between 20:00 and before 06:00 within the past year, is there a way to get this information?
Your help would be appreciated.
Thanks
Julian

Hi,
You get this information from tcode- SM20 (Security Audit log) by selecting the audit classes for dialog/RFC logon and required date-time ranges. For activating Security log, audit filters need to be activated first via SM19.
Thanks
Sandipan
Edited by: Sandipan Choudhury on Mar 3, 2011 5:26 PM

Similar Messages

  • Why does the apps store not accept my ID and password, it works fine to log into this forum and it works for the apple store, but not to log in to buy apps, it just keeps telling me that the id or password is wrong, and I know it isn't

    Why does the apps store not accept my ID and password, it works fine to log into this forum and it works for the apple store, but not to log in to buy apps, it just keeps telling me that the id or password is wrong, and I know it isn't

    I Just signed in to find the answer to this too.  I started having the same trouble today.

  • If I use Explorer, none of these problems exist. This suddenly happened overnight! I have your newest upgrade and I haven't had any problems for the past year or so....this is weird.

    1. only in firefox - flashplayer won't upgrade, endless loop of "add plug-ins" etc.
    2. vertical scroll bar flipped from left side to right.
    3. crtl ++ to zoom doesn't function.
    4. can't load any "personas" when in Google gmail.
    If I use Explorer, none of these problems exist. This suddenly happened overnight! I have your newest upgrade and I haven't had any problems for the past year or so....this is weird.
    == This happened ==
    Every time Firefox opened
    == Monday 6/14

    Your above posted list of installed plugins doesn't show the Flash plugin for Firefox.
    See [[Managing the Flash plugin]] and [[Installing the Flash plugin]]

  • Safari keeps quitting on me and has been for the past few weeks.. help!

    I have a macbook pro and I am using an up to date version of safari. For the past few weeks safari will quit out of now where and any page I was on will be gone, which is very inconvenient if I'm doing research for school and such because everything will be lost. I have gotten rid of extensions and that has not worked. Would love some help! Thanks

    Check the links below for options to remove the Adware
    http://www.adwaremedic.com/index.php
    Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support

  • I just downloaded after effects and opened it for the first time and i can't start a new project

    everytime i click on the bar above the program to start a new project it crashes

    Sorry to hear that.  Perhaps you ought to provide some information for diagnostic purposes:
    FAQ: What information should I provide when asking a question on this forum?

  • Nothing happens when I click on the friefox icon this morning. I have been using it successfully for the past year or so until now. I am worried about uninstalling and reinstalling because i desperatly don't want to lose my bookmarks. Please help!?

    Firefox seems unresponsive today and I can't open a webpage (I'm using explorer to write this). I have followed the advice on the trouble shoot page and nothing has helped or applied to my problem. If I uninstall (to reinstall) I do not want to lose the bookmarks I have built up. I am using windows 7 on a Dell laptop.

    '''I have also been having a problem I thought it was me or my computer'''as I am not really that good with my computer ,Also there are pages that I try to go to hat says pages busy or moved can not connect,but I can from explorer.

  • Iphone 4 will not sync with cloud, just tells me it failed and try again for the past month

    my iphone 4 will not sync with teh cloud.  I tried deletaing the backup on the cloud adn starting a new one, I tried resetting cloud on my iphone adn still an error that jsut says it had an error and try again later for over a month now.  any suggestions?

    Hi not sure if Im leaving this is in the right place but here is my issue:
    I have an iphone 4s and everything is working, including syncing it except that I have shot two videos that are 30 and 60 minutes that are not showing up on itunes. Therefore, I cannot save them and delete them off my phone. Curiously, when I view my phone on itunes it is showing on the content summary (color coded bar on the bottom of the screen) that the 'other' type content is 13 GB. I don't have other content and I am positive itunes is not recognizing them as video but 'other'. Any thoughts on this? My phone is full and don't want to delete these two interviews I shot. Thanks.

  • After Photoshop Elements quit working for the second time in three months, I uninstalled it and now cannot get it to reinstall from the disc. Nothing happens when I insert the disc. All I can do is look at the folders and files and see nothing that tells

    After Photoshop Elements quit working for the second time in three months, I uninstalled it and now cannot get it to reinstall from the disc. Nothing happens when I insert the disc. All I can do is look at the folders and files and see nothing that tells me how to start the installation. Clicking "open with Auto play" gives me irrelevant options, view photos, share, etc. I'm running Windows 8. This program has worked, although buggy, for the past year.

    reinstall by clicking setup on your disk or downloading and installing,
    Downloads available:
    Suites and Programs:  CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • After updating to 10.10.3, now my Macbook Pro will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?

    After updating to 10.10.3, now my Macbook Pro 15" (mid-2014) will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?
    By the way, I also updated my Macbook Pro 17" (mid-2009) and it seems to be running fine, though I haven't tried to restart it and log in. I'm afraid I won't be able to get this one to work either if I do.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • After Image and Before image in case of Generic extraction

    Hi Guru's,
    Please explain the concept of the After image and before image wrt to Generic extraction.

    hi,
       consider a record in data source suppose it is return to ods
    now
    materid matnme  quantiy
    1         tiles         20
    another recored with the same charcteridti arrive in bw
    i.e
    1         tiles          78.
    now rhe reault is
    1 tiles     78(it is new image) for new image
    1 tiles     20(before image)
    1 tiles   +58(additive image) for additive image.

  • After Range and Before Range

    Hi Experts,
    I encounter a problem with my templates that use After RANGE or BEFORE RANGE.
    In Planning Application, there is no problem downloading the file that uses AFTER RANGE and BEFORE RANGE but in CONSOLIDATION Application I was unable to download or open the file with AFTER RANGE and BEFORE Range.
    When I tried to open it, the Excel Program Hangs or Not Responding, then I must End Process to use the Microsoft Excel again.
    Any suggestions?
    thanks

    Why don't you just put contents of ds_remote_schema.ldif from the IS6.0 install packages to your schema file, any ##name you want and tell installer to use preconfigured directory?! Up to IS6.0ea2 schema was a separate file.

  • Record Number of users logged in to Portal and bring the data in to BI

    HI,
    I have a requirement for identifying the number of users logging in to SRM Portal and bringing those information in to BI and reporting them
    Can any one please tell me, how do i need to find those
    I checked tables USR01, USR02, USR03, USR41 etc but none of them gives the proper user/server information needed,
    SM04 transaction logs both user logging in to SRM server as well as SRM portal, but i need to find the underlying table for SM04, with which i can get the number of users logged in to the portal on a particular date range.
    If not, can anyone please tell me what is the best way to identify number of users logged in to SRM portal on a particular date and capturing those information and bringing in to BI and reporting them in BI
    Thanks in advance
    Pooja
    Edited by: Pooja on Nov 25, 2008 5:10 PM

    Please check the below link. should guide you in identifying the number of users logged into Portal which can be used for your reporting.
    [/message/319314#319314 [original link is broken];
    Thanks,
    Sruthi

  • Freight after ED and before VAT, Discount after ED and before VAT

    Hi,
    We have below two scenario and we want to map this.
    1) Discount after ED and Before VAT
    2) Freight After ED and Before VAT.
    first requirement will be fullfilled by assigning subtotal '6' to discount condition in M/08 and 362 routine to BASB and 363 routine to VAT condition in OBQ3
    Second requirement will be fullfilled by assigning subtotal '6' to Frieght condition in M/08 and assigning 363 routine to VAT condition in OBQ3 and removing 362 routine against of BASB.
    We want to map it both pl. guide us how to map BASB value in TAXINN.
    Regards,
    Rajesh

    Hi Ajit,
    Appreciate your answer.
    Taking you answer into consideration i have below excersice. 
    Subtotal '6' to Freight and Discount conditions
    362 routine to BASB conditon type in OBQ3
    363 routine to VAT condition in OBQ3
    it will work perfect in case of Discount after ED before VAT. but in case of Freight after ED bfroe VAT its not working.
    Since 362 routine, will do minus '6' subtotal value and plus '4' vlaue.
    If we add freight component to condition then system will reduce amount from BASB. that is practicly we dont wan't.
    expected your comment.
    Regards,
    Rajesh

  • Employee Termination after payperiod end dates and before end of the year

    I need a best possible senario at my current client one of the employees is going to be terminated *(resignation)on  Dec 29th 2010 and his last payroll for the year runs up to Dec 26th 2010 (12/13/2010-12/26/2010: Check Date 12/24/2010), and there will be a reminder of three more days because his termination on 12/29/2010. But the business is looking to not to carry his additional three working pay days for the next year and W2 and wanted to pay in regular check that will be 12/24/2010 as an additional payment.
    We dont do OCWB checks...can you please give us a best possible senario in SAP will be greatly appreciated

    Hi,
    A few things could be done here:
    1. Put the employee on unpaid leave for the extra three days and pay them out using a one time payment in the last pay period of the year.
    2. Terminate them at the end of the pay period and pay them out with a one time payment in the last pay period of the year.
    It really depends on a few factors.  You have to think about how end dating the employee on a different date them the actual termination date will effect other configuration/customization you my have and should the employee really get a year end tax form next year for those 3 days.
    thanks.
    JB

  • For the past few hours I have been trying to download ios 7.0.4 from itunes onto my iPhone after trying many times it would give me a error saying network failed! then i tried to download Ios 7.0.4 manually and then put it on but it keeps failing?

    For the past few hours I have been trying to download ios 7.0.4 from itunes onto my iPhone after trying many times it would give me a error saying network failed! then i tried to download Ios 7.0.4 manually and then put it on but it keeps failing? i have tried everything that i have came across and nothing seems to work please help!

    I venture to say you have a Windows PC.
    If so, before beginning the download try temporarily disabling your antivirus, anti-adware, anti-spyware, and any other anti-whatever that is required with the insecure OS your computer is running.

Maybe you are looking for