Users mixed up after backup restore

Hi
I run Yosemite OS X 10.10.1 on a MacBook Pro.
The users on my Macbook Pro seem to be mixed up, sometimes I see my name under Apple > Log out username other times I see the name of my wife.
This seems completely random. Depening on the ownership of the app it runs with my settings or no settings or it crashes.  If I run repair permission via Utility it is fixed for a day but in the morning I have to run it again. 
I know the source of the problem I backed up my wife's Mac on the same disk as my backup so they got mixed up, I only noticed after I restored my mac from that backup. I'm good with terminal .
How can I fix the mixup of users structurally without doing a clean install?
Thanks for your tips in advance.
Regards,
Willem-Hein

I love to see that 2.2 has been granted mind reading abilities. After I complained here, I restarted and resynced again.. and now.. ehm. it works. No Idea what I did different this time :(( But it seems to be working now. 
The last attempt was to add devices before the restore.. and then 3-4 resyncs, and 2 restarts.. 

Similar Messages

  • Headphones not working after backup restore on new iPhone 6

    My new iPhone seemed to work perfectly until i decided to to restore from the last back up copy of my iPhone 4S.  After the restore all the apps, data, and contacts were working fine, however the iphone headphone jack was not transmitting sound.  I tried several different headphones, and AUX cables without result.
    I decided to erase all data, and set up the phone as a "new iphone".  When this was done the headphone jack worked properly, however the data, apps, and contacts not available. 
    It seems to me the problem is with my back up file, however I have no idea what to do.  How do I keep my contacts, pictures, apps, notes, etc., and have the headphones work with my new iphone?
    Thanks for any help you may provide.

    If this is your iCloud email account, go to Settings>iCloud, turn Mail off, then turn it on again.
    If it's a different email account, delete the account and recreate it again.

  • After backup Restore in 2.2 - no current Data visible!!!

    Hello! 
    I´ve spent the last few days trying to get the 2.2 up and running. After multiple re do´s I´m at a loss how to further proceed. 
    I took a backup from our existing vmbased 2.1.2 (backup ... application NCS..) and then restored it to the new 2.2 VMWARE installation. 
    the log says that everything worked:
    Started at : Tue Feb 10 16:44:34 2015
    Initiating restore.  Please wait...
      Restore Started at 02/10/15 16:44:34
      Stage 1 of 9: Transferring backup file ...
      -- completed at 02/10/15 16:45:43
      Stage 2 of 9: Decrypting backup file ...
      -- completed at  02/10/15 16:50:41
      Stage 3 of 9: Unpacking backup file ...
      -- completed at  02/10/15 16:50:48
      Stage 4 of 9: Decompressing backup ...
      -- completed at  02/10/15 16:55:17
      Stage 5 of 9: Restoring Support Files ...
      -- completed at  02/10/15 16:55:19
      Stage 6 of 9: Restoring Database Files ...
       -- completed at  02/10/15 16:56:49
      Stage 7 of 9: Recovering Database ...
      -- completed at  02/10/15 17:25:38
      Stage 8 of 9: Updating Database Schema ...
                      Stage 1 of 5: Pre Migration Schema Upgrade ...
                                            -- completed at: 2015-02-10 17:45:05.653, Time Taken : 0 hr, 14 min, 22 sec
                      Stage 2 of 5: Schema Upgrade ...
                                    : This could take long time based on the existing data size.
                                            -- completed at: 2015-02-10 17:55:02.82, Time Taken : 0 hr, 9 min, 57 sec
                      Stage 3 of 5: Post Migration Schema Upgrade ...
                                            -- completed at: 2015-02-10 18:04:55.583, Time Taken : 0 hr, 9 min, 52 sec
                      Stage 4 of 5: Enabling DB Constraints ...
                                            -- completed at: 2015-02-10 18:06:04.474, Time Taken : 0 hr, 1 min, 4 sec
                      Stage 5 of 5: Finishing Up ...
                                            -- completed at: 2015-02-10 18:06:15.352, Time Taken : 0 hr, 0 min, 10 sec
      -- completed at  02/10/15 18:06:46
      Stage 9 of 9: Re-enabling Database Settings ...
       -- completed at  02/10/15 18:06:46
       Total Restore duration is: 01h:22m:12s
    INFO: Restore completed successfully.
    Starting PI Server... This may take some time
    Starting Prime Infrastructure...
    This may take a while (10 minutes or more) ...
    Prime Infrastructure started successfully.
    Finished at : Tue Feb 10 18:30:53 2015
    then I Resynced everything, wlc config, switch config, cleared browser cache, And restarted. The good point: The data is all there! Everything! Maps, ap locations, everything! I was baffeled. I wasn´t really used for restores on NCS/Prime going so well :D Thinking all is well, I started furthur in. And noticed that every client. Every 7300 of them was disassociated. If I choose a client that I know is on the network (my laptop..) it always says disassociated, and the last time seen was the time of the backup. Ok might need a while. Let it sit over night. STILL NOTHING.. If you click on the check box to show the client details, troubleshoot or anything - you just get the spinning cursor and nothing shows up. If you go in the maps, and click on a ap, then click on the client count - spinning cursor. Everything that has to do with current data - spinning cursor. 
    Then I restarted. Fresh 2.2 installation. Added a few devices, just to see that the data collection really works. And YEAH it did! So I thought it might be a problem with maybe the devices not being in the database, jada jada jada. So I imported a 100 devices with the discovery function. Which is working really well. And THEN I restored the backup, again all successful, and all data is there. 
    and this morning - still no current data available. 
    Has anybody come across this? and how do I solve this? I will be opening a tac too, but I was hoping you guys are faster :D 
    thanks alot for your help! 

    I love to see that 2.2 has been granted mind reading abilities. After I complained here, I restarted and resynced again.. and now.. ehm. it works. No Idea what I did different this time :(( But it seems to be working now. 
    The last attempt was to add devices before the restore.. and then 3-4 resyncs, and 2 restarts.. 

  • Can't find photos after backup restore

    Hey,
    I recently began to use my iPhone 4S after using iPhone 4 for about a year. It's been working fine. I took some photos and sent some messages on the 4S over the past week. When I connected it to iTunes, I chose to restore from backup, as I wanted to transfer all of my contacts over. After around 10 minutes, it restored.#
    When I went back on the 4S, I noticed that my message history from the last week was not present (only messages from when I was using the iPhone 4). As well as this, all of my iPhone 4 photos are on the 4S now, and I can't find the photos I took with the 4S over the last week.So essentially, I think I've backed up my 4S to my iPhone 4's data, losing all my 4S data from the past week?!
    So my question is, is there anyway I can find these photos and messages? Some of them were quite important too me, so I would really appreciate any advice.

    You restored your 4S from your iphone 4 backup.  The only hope you have of retrieving your current data is if you have a back up of your 4S.
    If not those data is gone.

  • After backup restores sql server error can't create folder, and can't search into list / library from ribbon

    after having created a portal on a development platform, I made a backup Sql server then restores the production platform with sql server. 
    Two problems : 
    Problem 1: 
    1 in libraries error "An unexpected error" when creating FOLDER from ribbon even with Action page -> Manage content and structure. I could only create a folder with "Open with Explorer" in the ribbon. In the folder I created, i can create
    a subfolder with ribbon, but not a folder in the root of the library. I create a sub sites and in this case it does not have any problem, I created a folder !!! 
    Problem 2: 
    2 The search from the search box in the lists and library does not work. I need it working. I create a search site and it works fine, but I want to do research on lists and libraries.
    aprés avoir créer un portail sur une plateforme de développement, j'ai effectué un backup Sql server puis un restaure sur la plateforme de production avec sql server.
    2 problèmes sont apparus :
    Problème 1 :
    1. dans les bibliothèques de documents  erreur " An unexpected error" lors de la création de DOSSIER du ruban, même avec Action du site -> Gérer le contenu et la structure. j'ai seulement pu créer un dossier avec "Ouvrir avec l'explorateur"
    dans le ruban. Dans le dossier créer j'ai pu créer un sous-dossier avec le ruban, mais pas un dossier dans la racine de la bibliothèque. J'ai créer un sous sites et dans ce cas il n'y as pas de problème, j'ai pu créer un dossier !!!
    Problème 2 :
    2. La recherche à partir de la zone de recherche dans les listes et bibliothèque ne fonctionne pas. J'ai besoin que ca fonctionne. j'ai creer un site de recherche et il fonctionne correctement, mais je veux faire des recherches sur les listes et bibliothèques.

    9c8700ee-9d51-4e5a-9b9d-22bebe9f03a1
    Name=Request (POST:http://tserveur:8080/sites/MEAE/Documents%20partages/Forms/Upload.aspx?RootFolder=%2Fsites%2FMEAE%2FDocuments%20partages&Type=1&IsDlg=1)
    9c8700ee-9d51-4e5a-9b9d-22bebe9f03a1
    10/13/2014 10:54:53.54 w3wp.exe (0x1054)                      
    0x0560
    SharePoint Foundation         Logging Correlation Data      
    xmnv Medium  
    Site=/sites/MEAE 9c8700ee-9d51-4e5a-9b9d-22bebe9f03a1
    10/13/2014 10:54:53.54 w3wp.exe (0x1054)                      
    0x0560
    SharePoint Foundation         Monitoring                    
    b4ly High    
    Leaving Monitored Scope (PostResolveRequestCacheHandler). Temps d’exécution=15,7441122074812
    9c8700ee-9d51-4e5a-9b9d-22bebe9f03a1
    10/13/2014 10:54:53.56 w3wp.exe (0x1054)                      
    0x0560
    Document Management Server    
    Document Management          
    52od Medium  
    MetadataNavigationContext Page_InitComplete: No XsltListViewWebPart was found on this page[/sites/MEAE/Documents%20partages/Forms/Upload.aspx?RootFolder=%2Fsites%2FMEAE%2FDocuments%20partages&Type=1&IsDlg=1].  Hiding key filters and downgrading
    tree functionality to legacy ListViewWebPart(v3) level for this list.
    9c8700ee-9d51-4e5a-9b9d-22bebe9f03a1
    10/13/2014 10:54:53.57 w3wp.exe (0x1054)                      
    0x0560
    Web Content Management        
    Publishing                    
    7fz4 High    
    WARNING: Cannot change FormContext.FormMode to [Invalid] because it is already set to [New]
    9c8700ee-9d51-4e5a-9b9d-22bebe9f03a1
    10/13/2014 10:54:53.57 w3wp.exe (0x1054)                      
    0x0560
    Web Content Management        
    Publishing                    
    7fz4 High    
    WARNING: Cannot change FormContext.FormMode to [Invalid] because it is already set to [New]
    9c8700ee-9d51-4e5a-9b9d-22bebe9f03a1
    10/13/2014 10:54:53.58 w3wp.exe (0x1054)                      
    0x0560
    SharePoint Foundation         Runtime                      
    tkau
    Unexpected System.ArgumentException: Argument de publication ou de rappel non valide. La validation d'événement est activée via <pages enableEventValidation="true"/> dans la
    configuration ou via <%@ Page EnableEventValidation="true" %> dans une page. Pour des raisons de sécurité, cette fonctionnalité vérifie si les arguments des événements de publication ou de rappel proviennent du contrôle serveur qui les a rendus
    à l'origine. Si les données sont valides et attendues, utilisez la méthode ClientScriptManager.RegisterForEventValidation afin d'inscrire les données de publication ou de rappel pour la validation.    à System.Web.UI.ClientScriptManager.ValidateEvent(String
    uniqueId, String argument)     à System.Web.UI.WebControls.Table.RaisePostBackEvent(String argument)     à System.Web.UI.Page.RaisePos...
    9c8700ee-9d51-4e5a-9b9d-22bebe9f03a1
    10/13/2014 10:54:53.58* w3wp.exe (0x1054)                      
    0x0560
    SharePoint Foundation         Runtime                      
    tkau Unexpected
    ...tBackEvent(IPostBackEventHandler sourceControl, String eventArgument)     à System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    9c8700ee-9d51-4e5a-9b9d-22bebe9f03a1
    10/13/2014 10:54:53.58 w3wp.exe (0x1054)                      
    0x0560
    SharePoint Foundation         Monitoring                    
    b4ly Medium  
    Leaving Monitored Scope (Request (POST:http://tserveur:8080/sites/MEAE/Documents%20partages/Forms/Upload.aspx?RootFolder=%2Fsites%2FMEAE%2FDocuments%20partages&Type=1&IsDlg=1)). Temps d’exécution=57,2831164943714
    9c8700ee-9d51-4e5a-9b9d-22bebe9f03a1
    10/13/2014 10:54:56.31 OWSTIMER.EXE (0x0B18)                  
    0x02F4
    SharePoint Foundation         Monitoring                    
    nasq Medium  

  • All apps don't work after backup restore

    My iphone 4 got stolen last week and so I bought a new iphone 4.
    Installed a bunch of apps when I got it. Then I plugged it into my laptop and itunes asked if I wanted to restore from back up (of my original iphone 4) or activate as new phone.
    I clicked restore from back up original iphone 4. Then after it loaded & did everything, I unplugged my iphone and none of my apps or email work anymore.
    When I click on any of my apps, it opens for 1 sec and then closes, returning back to the home page.
    For email I tried to go on 'add new account' and re-enter details, it does not work. Nothing happens when I enter the details. It doesn't register my new account.
    Please help?? What should I do?

    ..............So I used System Restore to restore my system (refresh point is 2 days old)...............
    It is possible that you are missing the updates that were installed in that 2 days. You rolled back 2 days, now you need to reinstall those updates.
    If you cannot use Start Menu, please follow this instruction given by Insider Hub......
    Checking for updates may fix this problem. To check for updates without the Start menu, do the following:
    Select the Internet Explorer icon.
    Type http://update.microsoft.com into the address bar and select
    Enter.
    If you are prompted to run a control, click
    Yes or Confirm
    This should bring up the Check for updates window. Install updates.
    If no update is available, or the available updates don’t fix the issue, restart the device–this should make the Start menu appear. To reboot without using the Start menu:
    Hold down the Windows key and select L to lock the device. Swipe up or select
    Enter to open the sign in screen. Select the
    Power icon on the log in screen to restart the computer.            
    OR
    Hold down the Windows key and select R to bring up a command prompt. In the prompt, type
    shutdown –r to restart
    Good luck.

  • Bookmark favicons don't display after backup/restoration until I revisit the webpage

    When restoring a backup of my bookmarks, the favicons associated with them don't reappear until I revisit the webpage. Is there a way to have Firefox fetch them for me without having to revisit?

    CheckPlaces: https://addons.mozilla.org/firefox/addon/10897
    This issue can be caused by using [[Clear Recent History]] to clear the cache or running in (permanent) [[Private Browsing]] mode. If you use either then try to disable at least once to sse if it works on a next start.

  • New photos lost after backup restore

    My son deleted some old photos from my iphone 4. I did a 'restore from back up' and here they are. However, I lost the latest photos. I haven't synced the phone after the back up. IS here any chance to find those pictures that disappeared?
    Thanks

    That is so sad. I lost pictures of my holidays with my son. Hundreds of them. Thank you for reply.
    There is nothing that can be done?

  • Audit Issue in QA after system restore and client copy

    Hi Experts,
    We have an audit issue and need your advise on that.
    Our QA system was audited and auditors were looking for the approval tickets on which a user was created. I found that several users that were not created in QA and do not even exist in QA have their change logs in QA showing that user was created.
    I researched it and found the steps that Basis and DBA's do when creating a new QA client.
    1. Basis export user master and authorizations using SAP_USER profile from the target QA environment.
    2. Then DBA's restore the QA Environment from the Production Backup.
    3. Basis import back the preserved User master and roles using SAP_USER profile.
    But when reading about this profile, I came to understand that change documents ( USH* ) tables are not exported and imported back. So that is why we have change logs in our QA from Production system.
    So my question is how to solve this issue, where Auditors look at the change documents in QA and ask for the documentation though in reality these change documents are coming from Production. Should we ask for DBA team to truncate USH tables or is there a client copy profile that saves the change logs that we can export and import back.

    Hi,
    as you know the USH* tables belong to delivery class L. The tables in this class are never copied during client copy but you don't do client copy. Idea of deleting records from L tables after backup restore does not sound good because you will loose all data. As a workaround you could backup content of tables with delivery class L, export users SAP_USER, restore production backup, import users and import backup for tables with delivery class L. There is around 5000 L tables in ECC. Another approach could be to restore production on different box and do proper client copy to QA system.
    Cheers

  • Backup Restore after Lion clean install sets invalid user

    I was recylcling an iMac ready for a new staff member and at the same time upgrading it to 10.7 Lion.  So I erased the disk and did a clean install of Lion from the Apple USB drive and then did a partial restore from a Time Machine backup disk - partial because I did NOT RESTORE ALL USERS and happened to exclude the user that was previously set as the default login. 
    On completion of the restore the computer hangs with a blank screen but is running as it beeps if you type anything - had to force down and restart. 
    On restart it came up with the usual user list and I successfully loggged in as the admin user so I could create a new user.
    Whilst setting the new user login options I noticed that the restore had set the login user to the user who was previously set as the default login but that user had NOT been restored an no longer existed so I assume it could not boot into that user after the restore and hence the hang.
    The restore utlity needs to check before setting the l;ogin info not just blindly copy it.

    File a bug report or enhancement request with Apple. Alternatively, turn off auto-login before restoring from TM.

  • How to recover backup user data after a restore

    I had a disk fail and could not boot. while in the restore software I was able to backup user data to a USB drive. Now that I've restored from the restore partition and got it running windows 7 home again, I don;t see how to recover the user data made with the low level software. Windows back up doesn't seem to recognise it and I can't find an HP utility to get at it.
    A program saved with the .wim back up files brought up an HP restore manager application that then copied the filed to my new C drive but how do I actually get it to recover them into their appropriate places and recreate users etc.
    Or, should I just consider myself lucky to still have copies of the files at all?  I'll not be real happy about that because it will be a tom of work to recreate everything manually even with the files.
    I'm hoping someone out there has a better solution for recovering all my user data into my new restored initial image.
    thanks,
    -dcb

    Hello dcbrower, You may be able to use the program Universal Extractor to extract the files in the .wim file.
    This is a Free program that can be found at this  Link. .
    Just extract the files in the wim file to a location you would like.
    Please click the White Kudos star on the left, to say thanks.
    Please mark Accept As Solution if it solves your problem.

  • Can not access Viber messages, photos & videos after making restore from iTunes backup

    Hello Viber Team,
    I have sent several help requests about my Viber issue but I did not receive any reply from anyone at viber's support team.
    It's highly seems the new viber app v5.1 which released on November 18, 2014 for iOS devices has a bug which deletes all messages and call logs once the app is updated to the new version. Because it requires for re-activation of already active viber account (as a new user) which causes this issue.
    As mentioned in viber website, the only effective method to restore in-app viber data is to restore from either iCloud or iTunes backup. I've tried both methods while I had backup from my viber messages in both backups. But after iphone is restored the app, on the first attempt to open the viber app, it crashes and deletes all messages and a popup window appears which asks for re-activation (while the account has already been actived) and I did NOT deactivated or NOT deleted before doing restore).
    I have also reviewed the other people's feedbacks in AppStore and it seems that I'm not the only person encountering with this technical issue. I'm  using iPhone 5S with iOS 7.1.2 and tried at least 10 times to retrieve my viber messages by backup restore, and not sure if the device's 64bit SoC has anything to cause this problem.
    Please inform me to find a solution for this disaster issue, or at least let me know if you're acknowledged and are analyzing the issue to provide a fix in your next update.
    Thank you.

    First, restoring from a backup you made AFTER messing with restrictions isn;t going to help you. Doing so will put the problem right back on your phone. So unless you have an earlier backup - you may not - you will have to restore as a new device.
    Second, don't know where you buy your cables but an Apple lightning cable is $19 direct from Apple. Sometimes they're cheaper if you buy from Amazon or other online retailers. And even less if you buy a reputable third-party cable (never buy off brand!).
    finally, a new cable does not necessarily mean it works, though that would be unusual. First try resetting your iPhone. This will work even if it's in recovery mode. Simultaneously press and hold the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears. Try again to see if the problem persists.
    If that works, your good to go. If not, report back. But again, remember, restoring that backup will place the restrictions back on your iPhone.

  • Disp+work process was down after the Restoreing the backup

    Disp+work process is down after the Restore of the backup
    s/m configration: windows 2003 server + oracle 10g
    The below is the log file
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      01
    sid        PRA
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    52
    intno      20050900
    make:      multithreaded, Unicode, optimized
    pid        2928
    Thu Apr 07 18:58:10 2011
    kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
    length of sys_adm_ext is 572 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (01 2928) [dpxxdisp.c   1231]
         shared lib "dw_xml.dll" version 52 successfully loaded
         shared lib "dw_xtc.dll" version 52 successfully loaded
         shared lib "dw_stl.dll" version 52 successfully loaded
         shared lib "dw_gui.dll" version 52 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3901
    Thu Apr 07 18:58:15 2011
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5233]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >pwsap_PRA_01                            <
    DpShMCreate: sizeof(wp_adm)          18304     (1408)
    DpShMCreate: sizeof(tm_adm)          3954072     (19672)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    DpShMCreate: sizeof(comm_adm)          528064     (1048)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1452)
    DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 05C00040, size: 4613144)
    DpShMCreate: allocated sys_adm at 05C00040
    DpShMCreate: allocated wp_adm at 05C01E28
    DpShMCreate: allocated tm_adm_list at 05C065A8
    DpShMCreate: allocated tm_adm at 05C065D8
    DpShMCreate: allocated wp_ca_adm at 05FCBB70
    DpShMCreate: allocated appc_ca_adm at 05FD1930
    DpShMCreate: allocated comm_adm at 05FD3870
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 06054730
    DpShMCreate: allocated gw_adm at 06054770
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 060547A0
    DpShMCreate: allocated wall_adm at 060547A8
    MBUF state OFF
    EmInit: MmSetImplementation( 2 ).
    MM diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation flat
    <EsNT> Memory Reset disabled as NT default
    <ES> 511 blocks reserved for free list.
    ES initialized.
    Thu Apr 07 18:58:16 2011
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 3208
      argv[0] = D:\usr\sap\PRA\DVEBMGS01\exe\jcontrol.EXE
      argv[1] = D:\usr\sap\PRA\DVEBMGS01\exe\jcontrol.EXE
      argv[2] = pf=D:\usr\sap\PRA\SYS\profile\PRA_DVEBMGS01_pwsap
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=1069
      argv[5] = -DSAPSYSTEM=01
      argv[6] = -DSAPSYSTEMNAME=PRA
      argv[7] = -DSAPMYNAME=pwsap_PRA_01
      argv[8] = -DSAPPROFILE=D:\usr\sap\PRA\SYS\profile\PRA_DVEBMGS01_pwsap
      argv[9] = -DFRFC_FALLBACK=ON
      argv[10] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1617]
    ***LOG Q0K=> DpMsAttach, mscon ( pwsap) [dpxxdisp.c   11414]
    DpStartStopMsg: send start message (myname is >pwsap_PRA_01                            <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    Thu Apr 07 18:58:17 2011
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpJ2eeLogin: j2ee state = CONNECTED
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 52
    Release check o.K.
    Thu Apr 07 18:58:42 2011
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
    ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1472
         (SI_ECONN_BROKEN; I4; ST; 127.0.0.1:1085) [nixxi.cpp    4235]
    DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3208)
    ERROR => DpProcKill: kill failed [dpntdisp.c   371]
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    Thu Apr 07 18:58:56 2011
    ERROR => W0 (pid 3216) died [dpxxdisp.c   14021]
    ERROR => W1 (pid 3224) died [dpxxdisp.c   14021]
    ERROR => W2 (pid 3232) died [dpxxdisp.c   14021]
    ERROR => W3 (pid 3240) died [dpxxdisp.c   14021]
    ERROR => W4 (pid 3248) died [dpxxdisp.c   14021]
    ERROR => W5 (pid 3256) died [dpxxdisp.c   14021]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => W6 (pid 3264) died [dpxxdisp.c   14021]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => W7 (pid 3272) died [dpxxdisp.c   14021]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => W8 (pid 3280) died [dpxxdisp.c   14021]
    ERROR => W9 (pid 3288) died [dpxxdisp.c   14021]
    ERROR => W10 (pid 3296) died [dpxxdisp.c   14021]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => W11 (pid 3304) died [dpxxdisp.c   14021]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => W12 (pid 3312) died [dpxxdisp.c   14021]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1597
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Apr 07 18:59:06 2011
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Fri Apr 08 01:59:06 2011
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program  Cl  User         Action                    Table
    0 DIA     3216 Ended         no      1   0             0                                                             
    1 DIA     3224 Ended         no      1   0             0                                                             
    2 DIA     3232 Ended         no      1   0             0                                                             
    3 DIA     3240 Ended         no      1   0             0                                                             
    4 DIA     3248 Ended         no      1   0             0                                                             
    5 DIA     3256 Ended         no      1   0             0                                                             
    6 UPD     3264 Ended         no      1   0             0                                                             
    7 ENQ     3272 Ended         no      1   0             0                                                             
    8 BTC     3280 Ended         no      1   0             0                                                             
    9 BTC     3288 Ended         no      1   0             0                                                             
    10 BTC     3296 Ended         no      1   0             0                                                             
    11 SPO     3304 Ended         no      1   0             0                                                             
    12 UP2     3312 Ended         no      1   0             0                                                             
    Dispatcher Queue Statistics               Fri Apr 08 01:59:06 2011
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    2
    2000
    5
    5
    --------++++--
    +
    DIA
    5
    5
    2000
    5
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          12
    wake_evt_udp_now     0
    wake events           total     8,  udp     6 ( 75%),  shm     2 ( 25%)
    since last update     total     8,  udp     6 ( 75%),  shm     2 ( 25%)
    Dump of tm_adm structure:               Fri Apr 08 01:59:06 2011
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Fri Apr 08 01:59:06 2011
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1597
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Apr 07 18:59:11 2011
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >pwsap_PRA_01                            < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED

    trc file: "dev_w0", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Thu Apr 07 18:58:16 2011
    B  create_con (con_name=R/3)
    B  Loading DB library 'D:\usr\sap\PRA\DVEBMGS01\exe\dboraslib.dll' ...
    B  Library 'D:\usr\sap\PRA\DVEBMGS01\exe\dboraslib.dll' loaded
    B  Version of 'D:\usr\sap\PRA\DVEBMGS01\exe\dboraslib.dll' is "700.08", patchlevel (0.46)
    B  New connection 0 created
    M sysno      01
    M sid        PRA
    M systemid   560 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    52
    M intno      20050900
    M make:      multithreaded, Unicode, optimized
    M pid        3216
    M
    M  kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
    M  length of sys_adm_ext is 572 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3216) [dpxxdisp.c   1293]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M  DpShMCreate: sizeof(wp_adm)          18304     (1408)
    M  DpShMCreate: sizeof(tm_adm)          3954072     (19672)
    M  DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    M  DpShMCreate: sizeof(comm_adm)          528064     (1048)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1452)
    M  DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 05C00040, size: 4613144)
    M  DpShMCreate: allocated sys_adm at 05C00040
    M  DpShMCreate: allocated wp_adm at 05C01E28
    M  DpShMCreate: allocated tm_adm_list at 05C065A8
    M  DpShMCreate: allocated tm_adm at 05C065D8
    M  DpShMCreate: allocated wp_ca_adm at 05FCBB70
    M  DpShMCreate: allocated appc_ca_adm at 05FD1930
    M  DpShMCreate: allocated comm_adm at 05FD3870
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 06054730
    M  DpShMCreate: allocated gw_adm at 06054770
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 060547A0
    M  DpShMCreate: allocated wall_adm at 060547A8
    X  EmInit: MmSetImplementation( 2 ).
    X  MM diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation flat
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M 
    M Thu Apr 07 18:58:17 2011
    M  ThInit: running on host pwsap
    M 
    M Thu Apr 07 18:58:18 2011
    M  calling db_connect ...
    C  Prepending D:\usr\sap\PRA\DVEBMGS01\exe to Path.
    C 
    C Thu Apr 07 18:58:27 2011
    C  Client NLS settings: AMERICAN_AMERICA.UTF8
    C  Logon as OPS$-user to get SAPSR3's password
    C  Connecting as /@PRA on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 UTF8                                                      1   0619F158   061A46F4   061A3F7C
    C  Attaching to DB Server PRA (con_hdl=0,svchp=061A3EC8,svrhp=061B5794)
    C  Starting user session (con_hdl=0,svchp=061A3EC8,srvhp=061B5794,usrhp=061CA558)
    C 
    C Thu Apr 07 18:58:28 2011
    C  *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
    [dboci.c      4345]
    C  Detaching from DB Server (con_hdl=0,svchp=061A3EC8,srvhp=061B5794)
    C  *** ERROR => CONNECT failed with sql error '1033'
    [dbsloci.c    10704]
    C  Try to connect with default password
    C  Connecting as SAPSR3/<pwd>@PRA on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 UTF8                                                      1   0619F158   061A46F4   061A3F7C
    C  Attaching to DB Server PRA (con_hdl=0,svchp=061A3EC8,svrhp=061B5794)
    C  Starting user session (con_hdl=0,svchp=061A3EC8,srvhp=061B5794,usrhp=061CA558)
    C  *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
    [dboci.c      4345]
    C  Detaching from DB Server (con_hdl=0,svchp=061A3EC8,srvhp=061B5794)
    C  *** ERROR => CONNECT failed with sql error '1033'
    [dbsloci.c    10704]
    B  ***LOG BV3=> severe db error 1033      ; work process is stopped [dbsh#2 @ 1199] [dbsh    1199 ]
    B  ***LOG BY2=> sql error 1033   performing CON [dblink#3 @ 431] [dblink  0431 ]
    B  ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#3 @ 431] [dblink  0431 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1403]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10019]
    M 
    M  Info for wp 0
    M 
    M    stat = 4
    M    reqtype = 1
    M    act_reqtype = -1
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source = 255
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    vm = V-1
    M 
    M  *
    M  *  LOCATION    SAP-Server pwsap_PRA_01 on host pwsap (wp 0)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Thu Apr 07 18:58:28 2011
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10204
    M  *  COUNTER     1
    M  *
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  260]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 3216) [dpnttool.c   327]

  • Time Machine forces a Full backup  (173GB) after System restore.

    Hi,
    Just restored my system from the latest backup in Time Capsule. Now Time Machine want to backup the whole disk again (173GB) although the changes between the current status and the latest backup should be minimal.
    Is this the normal behavior?, I would rather avoid the full back up if there any way to do it.
    These are the logs. First it says that the "Event Store UUIDs don't match". I'm not sure this is really normal, because I didn't swap hard drives or anything so I assume that the Event Store UUIDs should match.
    Then it says that the size of the backup is 173.86 GB.
    [October10] [October 10] 10:37:18 AM com.apple.backupd[1196] Starting standard backup
    [October10] [October 10] 10:37:35 AM com.apple.backupd[1196] Network destination already mounted at: /Volumes/Time Capsule
    [October10] [October 10] 10:37:45 AM com.apple.backupd[1196] Disk image /Volumes/Time Capsule/Rubén Laguna Macías’s MacBook Pro_001ff3524896.sparsebundle mounted at: /Volumes/Backup of Rubén Laguna Macías’s MacBook Pro
    [October10] [October 10] 10:37:45 AM com.apple.backupd[1196] Backing up to: /Volumes/Backup of Rubén Laguna Macías’s MacBook Pro/Backups.backupdb
    [October10] [October 10] 10:37:57 AM com.apple.backupd[1196] Event store UUIDs don't match for volume: Macintosh HD
    [October10] [October 10] 10:38:00 AM com.apple.backupd[1196] Node requires deep traversal:/ reason:must scan subdirs|new event db|
    [October10] [October 10] 11:32:39 AM com.apple.backupd[1196] No pre-backup thinning needed: 173.86 GB requested (including padding), 380.26 GB available
    [October10] [October 10] 11:37:57 AM com.apple.backupd[1196] Copied 83.6 MB of 143.7 GB, 3581 of 285647 items
    [October10] [October 10] 12:57:59 PM com.apple.backupd[1196] Bulk setting Spotlight attributes failed.
    [October10] [October 10] 12:58:24 PM com.apple.backupd[1196] Copied 95.2 MB of 143.7 GB, 101822 of 285647 items
    [October10] [October 10] 1:58:30 PM com.apple.backupd[1196] Copied 8.9 GB of 143.7 GB, 289125 of 289125 items
    [October10] [October 10] 2:02:32 PM com.apple.backupd[1196] Copied 291414 files (8.9 GB) from volume Macintosh HD.
    [October10] [October 10] 2:03:26 PM com.apple.backupd[1196] No pre-backup thinning needed: 2.22 GB requested (including padding), 371.79 GB available
    [October10] [October 10] 2:07:38 PM com.apple.backupd[1196] Copied 3601 files (626.5 MB) from volume Macintosh HD.

    Matthew Connolly3 wrote:
    Same problem here. Same machine. Restored from TM drive back to computer - worked fine doing incremental backups immediately after the restore, but now 2 days later, it wants to do a full backup and has gone and deleted all the older incrementals
    Not quite the same problem, as your full backup wasn't the first one after a full restore. Whether it's related or not is anybody's guess.
    Click here to download the +Time Machine Buddy+ widget. It shows the messages from your logs for one TM backup run at a time, in a small window. Navigate to the backup in question, then copy and post all the messages here. They may contain a clue.
    Also see #D3 in the Time Machine - Troubleshooting *User Tip* at the top of this forum for the main known reasons TM will do a full backup.

  • Missing all user-installed Apps after restore after failed 3.1.3 upgrade

    I upgraded my 3G to 3.1.3. iTunes (9.0.2.25 on Windows 7 PC) first backed up the iPhone and then proceeded with the upgrade, which failed (never had this happen before) and forced me to do a restore from the latest backup. After the restore, I seem to have all my data in the native apps, but all user-downloaded apps are missing. I expected them to be present after the restore... No???? I didn't keep apps synced back to my iTunes previously. Are they all lost?

    Update: I see ~370 megs of 'Other' usage and expect that to be my apps... but don't see any apps still.

Maybe you are looking for

  • Unable to Update Illustrator

    I am unable to get the latest update - The message from Creative Cloud is Failed, error UM441I210 When I did a search on the error number the steps it suggested were to Restart (still failed), uninstall and re-install (still failed) and finally to lo

  • Getting rid of white border around photos when using iphoto to iweb

    Hi there, Am creating web pages in iweb and importing photos from iphoto. Can anyone tell me how to get rid of the white border around my photos (image frame)? Hoping to enhance some of the templates with my own images. I also have photoshop elements

  • Why is LR 5 so sloooowwwwwwww?

    in the develop mode of LR i prefer to grab the histogram rather than the sliders, it's just better for me. In LR4 this was an instant job once the photo had loaded but in LR5 it takes a couple of seconds per photo for the mouse icon to change to enab

  • [SOLVED] /sys/class/power_supply/BAT0 reads 0 for all power files

    I'm on a Macbook 2,1 running Arch and just recently noticed that my conky started showing 2 billion % for my battery's charge. Conky simply uses: ${battery_percent BAT0}% In any case, I've manually dug around as well in /sys/class/power_supply before

  • DBMS_XSLPROCESSOR.SETPARAM problem

    When I try to pass values of global parameters of stylesheet with DBMS_XSLPROCESSOR.SETPARAM I get "ORA-31020: The operation is not allowed, Reason: Invalid XSL Parameter or its Value". Can someone provide me with working example, please? Database ve