Users moved from Exchange 2007 to Exchange 2013 unable to access mails on the mobile devices

New mailbox if created on Exchange 2013 works fine. But moved users from Ex2k7 to EX2k13 do not works. Here are the errors on the exchange server 2013 IIS logs:
For android -- DevOS:Android_S110_Error:System.ArgumentOutOfRangeException_ADWR
For iphone -- DevOS:iOS+8.1.1+12B436_S110_Error:System.ArgumentOutOfRangeException_As
Exhange 2013 is on Cumulative update CU6
Any clue.

Hi,
have you tried to recreate activesync profile?For IOS devices you could try to reset Network setting by doing the following:
Settings
General
Reset
Reset network settings
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

Similar Messages

After Migration Exchange 2013 does not send mail outside the organization

Dear,
After Migration Exchange 2010 to exchange 2013. We does not send email from the organization but we can received mail from others organization.
Delivery has failed to these recipients or groups:
[email protected] ([email protected]) The server has tried to deliver this message,
without success, and has stopped trying. Please try sending this message again. If the problem continues, contact your helpdesk.
Diagnostic information for administrators:
Generating server: OGMAIL.domain.net Receiving server: gmail.com (2607:f8b0:400c:c01::1a)
[email protected] 6/11/2014 10:16:10 AM - Remote Server at gmail.com (2607:f8b0:400c:c01::1a) returned '550 4.4.7 QUEUE.Expired; message expired' 6/11/2014
10:03:49 AM - Remote Server at gmail.com (2607:f8b0:400c:c01::1a) returned '441 4.4.1 Error encountered while communicating with primary target IP address: "Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted failover
to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts. The last endpoint attempted was 2607:f8b0:400c:c01::1a:25'
Original message headers:
Received: from OGMAIL.domain.net (192.168.10.12) by ogmail.domain.net
(192.168.10.12) with Microsoft SMTP Server (TLS) id 15.0.847.32; Mon, 9 Jun
2014 16:13:30 +0600
Received: from OGMAIL.domain.net ([::1]) by ogmail.domain.net ([::1]) with
mapi id 15.00.0847.030; Mon, 9 Jun 2014 16:13:30 +0600
From: Administrator <[email protected]>
To: Administrator <[email protected]>
CC: IT.HW-Masudur Rahman-MRT <[email protected]>, "[email protected]"
<[email protected]>
Subject: RE: Migration batch mrtmove has completed successfully.
Thread-Topic: Migration batch mrtmove has completed successfully.
Thread-Index: AQHPd1JEcid9YEi4F0ue6m1039EwR5top+xp
Date: Mon, 9 Jun 2014 10:13:29 +0000
Message-ID: <[email protected]>
References: <[email protected]>
In-Reply-To: <[email protected]>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
x-originating-ip: [192.168.10.2]
Content-Type: multipart/alternative;
boundary="_000_6b0d846f503942d99d44be9aff8d6adfogmaildomainnet_"
MIME-Version: 1.0
Queue viewer:
Identity: ogmail\8786\3470333575194
Subject: testing
Internet Message ID: <[email protected]>
From Address: [email protected]
Status: Active
Size (KB): 4
Message Source Name: SMTP:Default OGMAIL
Source IP: 192.168.10.12
SCL: -1
Date Received: 6/23/2014 3:22:49 PM
Expiration Time: 6/25/2014 3:22:49 PM
Last Error:
Queue ID: ogmail\8786
Recipients: [email protected];2;2;[{LRT=};{LED=};{FQDN=};{IP=}];0;CN=SendMail,CN=Connections,CN=Exchange Routing Group (DWBGZMFD01QNBJR),CN=Routing Groups,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First Organization,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domain,DC=net;0
Md. Ramin Hossain

What I notice is Queue expired. The message is not going out.
Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts.
This error states that It tried to connect to the target system but failed to connect out.
Is Exchange 2013 server added in the firewall rule to send communication over port 25?
Do you have use Front end proxy checkbox checked on the Send connector to internet that was created on 2013 (if created)?
If use front end proxy checkbox is checked, then you need to add permissions for your CAS server's IP in the Firewall for outbound port 25 rule. As it appears that the mail is originating from CAS to the firewall. If that checkbox is not checked, we need
to add the Mailbox server's IP on the outbound rule for port 25.

Moving mailbox from exchange 2013 back to exchange 2007 ..

Hi Guys,
I recently configured configured co-existence between exchange 2007 and exchange 2013. I moved a pilot user from exchange 2007 to exchange 2013 and now the user has issues receiving mails.
I am trying to move the user back to 2007 pending the resolution of the issue. The move status says completed but the mailbox remains in the exchange 2013 environment.
I need to return the user to an exchange 2007 mailbox database ..any ideas on what I am missing.
Thanx guys ..
~Richard
..forever is just a minute away*

Hi Richard,
Please move your mailbox from Exchange 2013 to 2007 from the Exchange 2013 admin center (EAC) and the Exchange Management Shell instead of EMC in Exchange 2007.
Then check whether the issue persists. If possible, please provide more error logs for further analysis.
Regards,
Winnie Liang
TechNet Community Support

Cannot send mail from Exchange 2013 to Exchange 2007

I have an
Exchange 2007server with all roles in the same server (Version:
08.03.0327.001 ) on a Windows 2008 R2 server. I have now installed two Exchange 2013 servers both with CAS and MBX roles on Windows 2012 servers
(full patched). There is also a DAG between the new servers. All mail goes through a BorderWare besides the internal mail.
I can send mail from both environments to the Internet. I can also send internal mail from Exchange 2007 to Exchange 2013.But the problem is that I am unable to send from Exchange 2013 to Exchange 2007. I've debugged, but not solved the problem and there are
few articles on the Internet.
Any suggestions?

These two sentences are in conflict : "I can also send
internal mail
from Exchange
2007 to
Exchange 2013. But
the problem is
that I am unable
to send from Exchange
2007 to
Exchange 2013. "
Can you describe what is your real problem? Flow from E2007->E2013? Or vice versa?
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Damir

Want to export user settings from Office 2007 on client, to be able to import in Office 2013?

Upgrading from Office 2007 to Office 2013. We may need to save the user settings on the client computer, because we are moving some of the systems from 32-bit to 64-bit. How can we export the settings to a folder?

Hi,
Could you please tell us what is included in user setting? Such as the customized Quick Access Toolbar settings, customize ribbon settings, or profile in Outlook?
Generally, we can’t upgrade operating system from 32-bit to 64-bit directly, we need to reinstall 64-bit operating system.
Office 2007 don’t provide the Import/Export button like Office 2010/Office 2013, we can’t export QAT setting and customize ribbon setting directly.
To customize an installation of Office 2013, you can use the Office Customization Tool (OCT) to perform tasks such as the following:
Specifying installation options
Customizing how Office applications and features are installed
Configuring default user settings
Managing additional content: add or remove files, registry entries or shortcuts
Configuring Outlook options: setting the default profile, adding email accounts, and specifying Exchange settings
For more detail information:
http://technet.microsoft.com/en-us/library/cc179097(v=office.15).aspx
Regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Importing user profiles from Exchange server 2010

Recently our org moved from exchange 2003 to exchange 2010. after the move we suddenly have all the distribution list not available in user profiles. groups like
#HR_ALL and #RESEARCH_ALL are not found in our user profile store anymore after latest crawl
At this point I am confused if I as SharePoint Admin needs to change something in profile import connection or is it something by default in Exchange 2010 security model that blocks distribution lists from crawling. No changes are made to default content
access account since early 2008 when we implemented MOSS 2007.
btw, just an FYI, even when i tried to use "#HR_ALL" in my outlook it gave me "You do not have permission to sent to this account" message .Though i am not not sure if this
was always the expected behavior or due to recent changes.
new to every thing

Hi Adil Baig,
i checked with our exchange team, seems there are differences in exchange 2003 to 2010, for example,
starting exchange 2007, the distribution list, need to be set to universal group, if you put as non-universal group then there should be no email enabled.
or if you upgrade from the previous version of exchange then the non-universal group may be added.
more detail for this :
http://technet.microsoft.com/en-us/library/40300ed4-85a5-463d-bb3a-cf787bd44e9d(v=exchg.141).aspx
if from the exchange part is done, then you may continue to the sharepoint 2007, SSP settings to import them again, http://wss-moss.blogspot.in/2008/07/blog-post.html
as i know, sharepoint may not take the distribution list as save enough because there is no security enabled, usually it take grouptype: security.
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Force downloading mysite HD photos from Exchange 2013

Hi Sharepoint Admins,
I want to force download all HD photos from Exchange 2013 into users mysite profiles. I already provisioned all user mysites by powershell. HD photos are also available, but every user has to open his own mysite by himself to trigger the picture download.
The goal is to download photos without having every user to logon on their site.
Is there any way to force this?
"SharePoint Server 2013 requests photos from Exchange 2013 automatically when a user performs an operation that causes a request for their own photo (for example, browsing to their own user profile page). That means that the user needs to have requested
his/her own photo, before other users will be able to see it."
Best Regards
Markus Kühn

Hi Markus,
I understand you would like to manually sync HD photo from Exchange 2013 to SharePoint 2013 mysite.
Since "SharePoint Server 2013 requests photos from Exchange 2013 automatically when a user performs an operation that causes a request for their own photo (for example, browsing to their own user profile page)", you need to browse all
sites in Mysite web application.
To do this, you may refer SharePoint warmup script and make the script to work for you MySite web application. Just run the warmup script, all mysites can be browsed once.
https://gallery.technet.microsoft.com/office/SharePoint-2007-2010-or-d1884b4b
https://spbestwarmup.codeplex.com/
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Exchange 2010 users cannot open Exchange 2013 shared mailbox

Title says it all.
We're in the process of migrating 1000+ mailboxes to Exchange 2013. A number of shared mailboxes have been migrated, but those users still on 2010 cannot open them.
Is this just how it is, or is there a way around it?

Hi,
I tested in my lab, if the shared mailbox is on Exchange 2010, I could open this shared mailbox successfully. Then I moved this shared mailbox to Exchange 2013, after that, I couldn’t open it anymore, I got the following error:
Besides, I tried to open a shared mailbox on Exchange 2013 which was not moved from Exchange 2010, it is the same error message.
Based on the test, it seems that Exchange 2010 users can’t open shared mailbox on Exchange 2013. So I recommend you move those users to Exchange 2013.
Best regards,
Belinda Ma
TechNet Community Support

Exchange 2013 Issue: Outlook 2010 auto populating the From Tab when forwarding email

Exchange 2013 Issue: Outlook 2010 auto populating the From Tab when forwarding email
I am running Exchange 2013 and I have an end user who connects to it via Outlook 2010. All was going well till he went to forward an email and he noticed that the From button appeared and auto populated the sender's email address.
I have clicked the Empty Auto Complete List in Outlook's Send messages... still displayed the From tab when forwarding.
I recreated the profile in outlook... same thing.
I created the profile with outlook 2013... same thing.
There is only one user profile setup in Outlook.
(I know the from tab usually appears when you have multiple profiles setup in Outlook and/or when you configure the "From" tab.)
I opened the end user's email in Exch 2013's OWA... what was different here was when I clicked on the email and it opened, it did NOT have the Reply or Forward option... and it displayed as a "Draft" email.
Does anyone have any ideas?

So are you saying that the from button is filling the option with the original senders address (eg the person who sent the message to your user), or that it's filling in the your users address (in which case I don't understand what the issue is, since
it IS going from your user)?

Upgrading from Exchange 2013 CU1 to CU2

1 : Upgrading from Exchange 2013 CU1 to CU2
================================================================
"Unable to remove product with code 4934d1ea-be46-48b1-8847-f1af20e892c1.
Fatal error during installation. Error code is 1603. Last error reported by the MSI package is 'Service 'Tracing Service for Search in Exchange ' (SearchExchangeTracing) could not be stopped.
Verify that you have the correct permissions to stop system services.'."
================================================================

Hi,
According to the error message, it is highly likely caused by insufficient permission.
Please verify that your user account is member of Exchange administrators group and not limit by RBAC, than try again to see if this works.
If the issue continues, run the command below to uninstall the product:
msiexec.exe /X {code 4934d1ea-be46-48b1-8847-f1af20e892c1}
Msiexec (command-line options):
http://technet.microsoft.com/en-us/library/cc759262(v=ws.10).aspx
If you have any question, please feel free to let me know.
Thanks,
Angela
Angela Shi
TechNet Community Support

Moving from Exchange 2010 to Exchange Online: AD issue

Dear All,
Our company will moving from Exchange 2010 to Exchange Online and we have a on-premise WinSer 2008R2 for AD.
Currently, user have to login to our domain and use the same ID and PW to access their outlook.
1.If we move to Exchange online, do we have to do anything with our on-premise AD server?
2.If user prefer using only one ID and PW for PC to access domain and Exchange online, what should we do?
3.Is there any point or do we still need current on-premise AD server after we moved to Exchange Online?
Thank you so much for your attention and help!
Best regards,
Shiloh

Hi,
There are a lot of corrupted items. You can try raising the baditemlimit to 999 to workaround this issue
Get-PublicFolderMigrationRequest | Set-PublicFolderMigrationRequest -baditemlimit 100
To resumed the PublicFolderMigrationRequest
Get-PublicFolderMigrationRequest | Resume-PublicFolderMigrationRequest
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help.
Simon Wu
TechNet Community Support

Loading MySites profile photos from Exchange 2013 to Sharepoint 2013

Hi
I've configured SharePoint 2013 to get it's profile photos from Exchange 2013 using the method in the link below BUT Is there way to force the initial sync other than requiring the user to load their profile in a browser?
http://blogs.technet.com/b/jenstr/archive/2012/08/17/using-exchange-2013-preview-high-resolution-photos-from-sharepoint-server-2013-preview.aspx
Thanks

As a workaround I have applied a client-side powershell load of the SharePoint thumbnail image. This triggers the sync just like loading in a browser does. I run it hidden on the user PC. I run it once a day for a while as for some reason
a load of the profile does not always trigger the sync and if it does not subsequent immediate sync's don't help - presumably due to the UserPhotoExpiration or
UserPhotoErrorExpiration settings.
Here's the code - enjoy....
# script to trigger Sharepoint to download the high res photo from Exchange
# sadly this must be done client side.
# have PC management software copy the files to the local PC then run......
# powershell.exe -ExecutionPolicy Unrestricted -noninteractive -File "%temp%\PhotoSync.ps1" >>"PhotoSync.log" 2>&1
# All output will end up in the log file
# the following syntax triggers the download (just find yours from your Sharepoint User profile photos)
#https://people.myco.com/User%20Photos/Profile%20Pictures/USERNAME_LThumb.jpg
$username = [Environment]::UserName
$userphoto = "https://people.myco.com/User%20Photos/Profile%20Pictures/" + $username + "_LThumb.jpg"
write-host "$username : $userphoto"
$web = New-Object system.Net.WebClient
$web.UseDefaultCredentials=$true
Try{
$result = $web.Downloadstring($userphoto)
Catch {
Write-Warning "$($error[0])"

Migrate Exchange 2010 to Exchange 2013, Need to defined win 7 users logon to Exchange 2010 & Win 8.1 users logon to Exchange 2013

Hi,
My organization have few win 7 and windows 8.1 clients. Now I want to migrate exchange server 2010 to 2013. And I don't want to remove exchange 2010 from the organization. Because I want to connect win 7 client through exchange 2010 and windows 8.1 user
connect to exchange 2013. Is there any way to define the win 7 users to connect to exchange 2010 and Windows 8.1 users to connect to exchange 2013?
Md. Ramin Hossain

The client connections are proxied to the mailbox servers that hold the mailbox.
You would need to have 2010 MBX servers with the mailboxes for the XP users, and 2013 MBX servers holding the mailboxes for the 7 users. And of course, the appropriate CAS servers.
Realistically, you need to migrate away from Windows XP. It is no longer supported.

Migrating a mailbox cross forest from exchange 2013 Sp1 to exchange 2010 SP2 Update rollup 8

I can migrate a mailbox fine from exchange 2010 sp2 update rollup 8 to exchange 2013 sp1 or Cu2.
I was testing today migrating cross forest from 2010 sp2 udpate rollup 8 back to exchange 2010 sp2 but I get the below error. Is this even possible? I cannot find any documentation on this scenario yet.
VERBOSE: [21:52:47.622 GMT] New-MoveRequest : The remote server doesn't support client 'casservername.domain.com'
version (14.2.341.0 caps:05FEFF). Missing functionality: 'TenantHint'.
VERBOSE: [21:52:47.637 GMT] New-MoveRequest : Admin Audit Log: Entered Handler:OnComplete.
The remote server doesn't support client 'casservername.domain.com' version (14.2.341.0 caps:05FEFF). Missing functionality: 'TenantHint'.
+ CategoryInfo : NotSpecified: (0:Int32) [New-MoveRequest], RemotePermanentException
+ FullyQualifiedErrorId : 782D22F0,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest

Hi Steve,
I'm a little confused what you are saying. Here is my understanding:
When you migrate mailboxes from Exchange 2013 back to Exchange 2007, the above error occurs.
If I have misunderstood your concern, please let me know.
For migrating mailboxes back to Exchange 2007, there is a simple and straightforward method. Please use the New-MailboxExportRequest cmdlet to convert all mailboxes into pst files. And then use the Import-Mailbox cmdlet to import all pst files into Exchange
2007.
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Getting error when I try to remove eum secondary email address from the Mailbox from Exchange 2013 server

Getting error when I try to remove eum secondary email address from the Mailbox from Exchange 2013 server. The command works if you issue directly from the server exchange shell.
I open the remote power shell to the exchange server 2013.
Issue the following commands and getting the following error.
$mailbox = Get-Mailbox -Identity testuser$mailbox.EmailAddresses -= "eum:50004;phone-context=telExt5digits.lync5.com"Then getting the following error:Method invocation failed because [System.Collections.ArrayList] doesn't contain a method named 'op_Subtraction'.
At line:1 char:27
+ $mailbox.EmailAddresses -= <<<< "eum:50004;phone-context=telExt5digits.lync5.com"
+ CategoryInfo : InvalidOperation: (op_Subtraction:String) [], RuntimeException
+ FullyQualifiedErrorId : MethodNotFoundHelp!

Now for an answer - your remote session doesn't have the same object you have on the server itself. Notice it says this is an array list, not a ProxyAddressCollection. If you need to work around this, you'll need to massage the addresses another
way that the system will accept. I'd try the following:
$NewAddresses = $mailboxEmailAddresses | ? { $_ -notlike "eum:50004;phone-context=telExt5digits.lync5.com" }
See what you get in the $NewAddresses variable when you do this.

Users moved from Exchange 2007 to Exchange 2013 unable to access mails on the mobile devices

Similar Messages

Maybe you are looking for