Users not getting same data even with same Access Profiles

Hi All,
As part of our testing , we changed the security profiles to test different scenrios for different user roles.
Two users were given exactly same Member Access Profiles/ Task Profile/ Team and then both were able to access same BPF.
But one of them is not able to see the Transactional Data in input schedule and reports.
Please guide with some solution.
Regards
Abhishek

Hi Sorin
1. No error message received.
2. BPF opens up for both the users.
3. Same Member Access Profiles for both the users.
The data is still not visible for one of the users.
Please suggest some other link to resolve it.
Regards
Abhishek

Similar Messages

Do not get any data from 0CA_IS_TS_1 and 0CA_IS_TS_2 data source

Hi all,
We are trying to populate cubes(0CATS_C01) and (0CATS_C02) for which data sources are 0CA_IS_TS_1 and 0CA_IS_TS_2 respectively. We activated business content for these data sources. When we run these data sources in RSA3 we do not get any data even though we have data in the repective tables. We applied SAP Note :1586467, which says (Note 1586467 - Extractor 0CA_TS_IS_1 returns no data), Can you please help me out in knowing if we are missing some thing?
Thank you,
Bob.

Hi,
To use this DataSource you must have implemented Support Package SAPKH46C32, or have made the relevant corrections in SAP Note 509592.
Pl check you have required data as mentioned below
When transferring time sheet data to the Business Information Warehouse (BW), you must note the connection between the following data sources:
· CA_TS_IS_1 (Time Sheet Data (Approved))
Documents are written in the SAP R/3 system for Time Sheets with status 30 (approved). The documents log the changes that have been made to data records.
Therefore, the SAP R/3 system can perform a delta update for this data source. The system only transfers newly approved data records and changes that have been made to existing data records. At the same time, the SAP R/3 system notes the date of the last delta transfer.
· CA_TS_IS_2 (Time Sheet Data (Released for approval))
The SAP R/3 system does not write documents for Time Sheet data with status 20 (released for approval). This means that changes made to these data records are not logged.
Therefore, the SAP R/3 system always performs a complete transfer of data records that have been released for approval. The number of data records that need to be transferred usually remains constant because in the period between two transfers not only new data records are added but other data records are also approved. Therefore, system performance is not restricted.
Thanks and regards

XL Reporter not getting any data

Hi
When I am using XL Composer and generating report using it, I am getting data what the fields I have dragged. Not getting any data when generating same report in organizer from composer except the Title field names. Before I got but now I am not getting.
STEPS Taken
 XL Reporter Composer Tool bar
 Generate
 Generate(Window)(Name: given Sample & checked Generate report then ok)
And having another problem when generating sample reports I am getting data and when editing that report are preparing new with some fields, I am not getting any data.
Example: I have made Edit of Bank Book and placed extra field Document No, saved the report and generated I am not getting any data except titled fields.
 In new report I have taken BP Code and sales Employee I am not getting any data.
Please Can any one help me, It is urgent.
Thanks in Advance.
Urs
Sindhu

If you did not select any "total" field (quantities, totals, etc), XL Reporter will show data only at report composer. It will not work at final XL Report itself.
This is a normal behaviour of XL Reporter, unfortunetaly.
If you are trying to create a simple list of records, I suggest to use Query Generator, combined to PLD in order to get a formatted report.

Iam not getting the data on screen after using the user exit zxpadu01

Dear Freinds
 As per my requirement when the user enters value Ansal it should get defaulted to Amount field (bet01 ) based on the wage type
i have written calculation ( q0008-bet01 = ansal/100) before it getting defaulted to bet01, i found that value is not getting default on the screen for bet01 once i enter value for Ansal , please any body correct my code
in ZXPADU02 i have written the code as below :
data : wa_p0008 like p0008,
 i0008 like p0008,
 l_v_ANSAL type ANSAL_15,
 l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008. -- HERE I GOT ALL THE DATA EXCEPT BET01
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008 --- HERE I CAN SEE EVEN THE BET01 IS FILLED
IMPORTING
prelp = innnn. --- HERE I CAN SEE LGART BUT NOT AMOUNT VALUE
endif.
when others.
endcase.
IN ZXPADU01 I HAVE WRITTEN AS BELOW:
data : wa_p0008 like p0008,
 i0008 like p0008,
 l_v_ANSAL type ANSAL_15,
 l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008 --- I CAN SEE ONLY WHEN I COME AGAIN
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
Now my problem is as follows :
 i have entered the value for Ansal (ex: p0008-Ansal = 1000) ..........and i say enter then i should found the calculated value for the ansal through my coding
and it should display in bet01 as 10 ( q0008-bet01 = p0008-ansal /100)
but i dont find the value 10 being displayed for the field bet01 on the screen when
user enters Ansal as 1000 .........even then i have saved it to test the scenario......
now i came in displayed mode (pa20 ) for the infotype 008 for the same personnel no for the same dates .....where i created the record........i found that the value
bet01 is there i.e i can see the value bet01 as 10 ( my requiremnt here matching)
but when the user say enter during the time of creation of the record the value
bet01 is not getting defaulted with 10 .........why iam not able to understand
PLEASE ANY BODY HELP ME IN THIS REGARD
regards
shanti.

Hi Pranesh,
 i have used the logic which you hav given as below
in ZXPADU02
FIELD-SYMBOLS <fs> TYPE ANY.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount . --- amount as (ansal /100 i.e 1000/100 = 10) 10
endif.
still iam not getting the data for the field bet01
this is the coding i am using
data : wa_p0008 like p0008,
 i0008 like p0008,
 l_v_ANSAL type ANSAL_15,
 l_v_amount type PAD_AMT7S.
FIELD-SYMBOLS <fs> TYPE ANY.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount .
endif.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
please help me as iam still not getting (value in bet 01) when i press enter once i enter value in ansal feild.
regards
shanti.

Same station resource with same schedule squence but the start date is diff

We are running ASCP capacity planning but found "Same station resource with same schedule squence but the start date is different". Does anyone know which parameters/setup may impact on this result or the root causes?
Regards,
Edward

Wesley,
I am a little confused about your scenario. I will assume that you are talking about the Planned orders that are generating the dependent requirements that are being seen by your Raw Material.
So, you have a material (not the Raw Material) that has the Material master settings that you mentioned above. This material has been planned, and MRP created two planned orders. These two planned orders have the same start date, but the dependent requirements dates that have been generated against your Raw Material are different. You do not want this to happen. Please confirm.
Dependent requirements of planned orders can be influenced by:
1. Dependent Rqments Settings in OPU5
2. Distribution Strategy OPB3/OPB4/OPB5
3. Lead Time offsets in the BOM
Ensure that these settings meet your business requirements.
Best Regards,
DB49

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. t worked, but only for those with PC. I could not get it to work with Apple Yosemite even with reader installed . is there a way i can make it work for apple /

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. It worked, but only for those with PC. However, I could not get it to work with Apple loaded with Yosemite even with reader installed . Is there a way i can make it work for apple / Mac? It worked fine on a mac using Mountain Lion and reader
Thanks

LiveCycle = XFA forms.
afaik - These cannot be used in Apple OSs.
Be well...

Can we use same data definition with multiple concurrent programs?

Hi,
My requirement is as below:
I have two concurrent programs (say CP1 and CP2), both concurrent programs need to use same data definition (the same data template xml file) and same RTF layout template. However when registering data definition in the E-Biz, the data definition code must match concurrent program, hence I have to create two definitions (for the same data template xml file) and because layout template is attached with data definition I have to duplicate the layout definition also.
In summary, i have to create two (duplicate) Data Definition and Layout Template for the same dataTemplate.xml and Layout.rtf files. Is there any way to avoid this duplication?
The only issue with duplication is any change in xml or rtf needs to be updated in all the four definitions (2 data definitions and 2 layout definitions).
Thanks
Bhavik

I found the resolution and thought of sharing
you can see this post
*[How to use same data definition/template between multiple concurrent programs? |http://techatwork.wordpress.com/2009/08/06/how-to-use-same-data-definitiontemplate-between-multiple-concurrent-programs/]*
Thanks
Bhavik

New Server - Not Getting Event.Data back

Its a weird problem i'm having. I've setup a brand new server (Original was a shared hosting setup from godaddy).
I'm using my same application
And i'm not getting event.data info back (in XML form)
Here's an example:
private function onUploadCompleteData(event:DataEvent):void {
updateStatus(event.data, _numCurrentUpload - 1);
var x:XML = new XML(event.data.toString()); <---- NOT FIRING
Application.application.upAvatar = "/profile/" + x.name;
Does anyone have any ideas? I was thinking it could be a misconfiguration with my apache settings.
I'm using:
Ubuntu
Apache2
PHP5
CURL
Thanks..

hi,
have you placed a fault event handler on your request to see what error if any is being returned ?
David.

Can we create same party site with same customer in different OU

I am able to create same party sites with same customer in different Operating Unit through front end but I am not able to do so using TCA Api HZ_CUST_ACCOUNT_SITE_V2PUB.create_cust_acct_site .I am getting the below error 'Value for cust_account_id - party_site_id must be unique'.Ineed to migrate customer details from one OU to another OU and the party site number need to be same .Can anyone suggest a way in which I can do the above ?
Reeja

We can create multiple customer acct site across different OU pointing to same party_site_id with API's also. I am sure that you have initialise the org context in your code somewhere and thus its giving you this error. Reinitialise the org to target org before calling this API.
Thanks
Amit Singh

I just purchases an ipod nano. I can not get it to sync with my existing itunes.

I just purchases an ipod nano. I can not get it to synce with my existing itunes account. I am not sure what I am doing wrong. I had no trouble using my ipad or my daughter's ipod touch.

Hi there,
I would recommend taking a look at the information found in the articles below. The first two articles have the same content, but are geared towards either OS X or Windows.
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12313
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12113
How to use multiple iPhone, iPad, or iPod devices with one computer
http://support.apple.com/kb/ht1495
-Griff W.

TS3274 My iPad gets very hot even with short term use. Is this normal?

My iPad gets very hot even with short term use. Is this normal?

I assume that you mean your new iPad - the 3rd generation model. No - that is not normal. Some users have reported this issue and it may be that you have a faulty device.
It may get a little warmer than the previous models of iPads but it should not get "very hot" under any circumstances. Return it - take it to an Apple Store and let a Genius have a look - contact Apple however you need to do so - and let them know about it - but that is NOT normal.

Refernce Nav igational Attribute is not getting the data in Infoprovider

Hi,
I am facing the issue with Reference Characteristic which is a navigational attribute for which data is not getting populated in the cube.Please find the below scenario.
We have three characteristics 0RECV_WBS_E , 0WBS_ELEMT, ZPSBUSA .Char 0RECV_WBS_E is reference of 0WBS_ELEMT.
0RECV_WBS_E__ZPSBUSA,0WBS_ELEMT__ZPSBUSA are the Navigational attributes of ZPSBUSA, these two are maintained as Navigational attributes in the cube and at info object level. The Nav Attribute 0RECV_WBS_E__ZPSBUSA is not getting the data in infocube where as 0WBS_ELEMT__ZPSBUSA is getting the data .The data is available for the two Nav attributes in the info object ZPSBUSA .Can you please suggest why this reference Nav attribute 0RECV_WBS_E__ZPSBUSA is not getting data in the infocube.
Thanks,
SUbhash

Hi,
I am facing the issue with Reference Characteristic which is a navigational attribute for which data is not getting populated in the cube.Please find the below scenario.
We have three characteristics 0RECV_WBS_E , 0WBS_ELEMT, ZPSBUSA .Char 0RECV_WBS_E is reference of 0WBS_ELEMT.
0RECV_WBS_E__ZPSBUSA,0WBS_ELEMT__ZPSBUSA are the Navigational attributes of 0WBS_ELEMT, these two are maintained as Navigational attributes in the cube and at info object level. The Nav Attribute 0RECV_WBS_E__ZPSBUSA is not getting the data in infocube where as 0WBS_ELEMT__ZPSBUSA is getting the data .The data is available for the two Nav attributes in the info object 0WBS_ELEMT .Can you please suggest why this reference Nav attribute 0RECV_WBS_E__ZPSBUSA is not getting data in the infocube.
Thanks,
SUbhash
Edited by: MarkSubhash on Dec 9, 2011 11:11 AM

SAP Fiori Purchase Order not getting any data & getting a 404 Error Message

Hi
I have downloaded Purchase Order SAPUI5 code from SAP Fiori server. import it into Eclipse then try to run that Apps/code(SAPUI5) from browser.
1) Not getting any Data.
2) It show 404 Error Message.
3) Its show wrong User Name as Login

Hi Pankaj,
First question :
Are you able to get the data in Fiori ?
Secondly,
You have mentioned as Purchase order, but here you have given snapshot of Purchase requisition app, and you are calling also purchase req app from the browser. Please clarify
If you have mistakenly written PO : If you are still not getting data for Approve Purc req, then check if your RFC connections are proper from Gateway to backend and backend to Gateway.
If RFC is working fine, check the Remote logon, it should be marked as Current user. If its not marked as current user, then it will show some other user.
Regards,
Tejas

Wireless 2504,user not getting dhcp ip address

Hi i have configured wlc 2504 .in that i have configured two interfaces.one is guest, 2nd is internal user,
the pblm when user try to connect with that contain ssid user not getting ip address,
i have connected only one link between core to wlc on port 1.for guest interface i used port 4.but no physical link.
Please help this

There are multiple ways how the clients can get their IP-address in a WLC deployment.
From the WLC-FAQ:
How does DHCP work with the WLC?
A. The WLC is designed to act as a DHCP relay agent to the external DHCP server and acts like a DHCP server to the client. This is the sequence of events that occurs:
Generally, WLAN is tied to an interface which is configured with a DHCP server.
When the WLC receives a DHCP request from the client on a WLAN, it relays the request to the DHCP server with its management IP address.
The WLC shows its Virtual IP address, which must be a non-routable address, usually configured as 1.1.1.1, as the DHCP server to the client.
The WLC forwards the DHCP reply from the DHCP server to the wireless client with its Virtual IP address.Note: You can also configure the WLC to act as a DHCP server. For more information on how to configure a WLC as a DHCP server, refer to the Configuring DHCP Scopes section of the document Cisco Wireless LAN Controller Configuration Guide Release 5.1.
If you want more in-depth information you should read "DHCP with the WLC":
http://www.cisco.com/en/US/partner/products/ps6366/products_tech_note09186a0080af5d13.shtml
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni

I am not getting the data in Bex from the cube

Hi Experts,
i am not getting the data from the cube to Bex,
cube having the data, but i am not able to see this data in the Bex result area.
Can any one help me.
Best regards,
Bhaskar

Hi
In the manage cube, is reporting symbol is there for your requests
If you have any red requests delete them and refresh
If all requests having reporting symbols you may check the BEx without any filters or selection criterions
Regards
N Ganesh

Users not getting same data even with same Access Profiles

Similar Messages

Maybe you are looking for