Users report no email messages after migration from Lion Server to a clean Mavericks Server with Migration Assistant

We have a Mac Mini server running Lion Server.
We bought a new Mac Mini server and installed OS X Mavericks and the Server app onto it.
We then ran Migration Asssitance on the Mavericks machine and migrated from the Lion server in target disk mode.
The migration seemed to run OK and all the user accounts seem to be working, however users are reporting that there are no email messages in their mailboxes.
Confirmed this behaviour by adding their accounts to mail (via IMAP) on a separate laptop.
Did we miss something? Is there an extra step to move the email service data?
Any insights would be grately appreciated.
Many thanks, Tom.

Hey tomgallagher!
You can use this article to help you troubleshoot the functionality of these Mail accounts if they are not functioning properly:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
If your saved emails did not come across properly in the Migration, you can always export the mail from the old computer and import it into the new computer manually:
Lion Mail: Export mailboxes
http://support.apple.com/kb/PH4811
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Similar Messages

  • Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3.

    Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3 on my 27" iMac.
    When searching in Apple Mail, sometimes a get a few results (with many missing), and sometimes no results at all.
    I had absolutely no problems before with Snow Loepard.
    I have reindexed mail and my startup drive. I have followed discussions regarding this matter and tried everything - a waste of time.
    This is VERY serious for me - I have many thousands of messages that I archive and need to reference for work and clients, and now I cannot find them.

    I found out that I needed a $100 mini displayport to dual-link dvi adapter to make my $30" cinema display work with my macbook pro
    http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?fnode=51
    When I found out that solved the problem, I took it back because that was too expensive for a stupid adapter, and it still didn't work perfectly.

  • Mail trying to download an email message already deleted from the server

    And it won't download anything else. How do I get the program to recognize that this message has already been deleted?

    Try the following.
    With the Mail.app quit and using the Finder, go to Home > Library > Mail > this POP account named folder (named by the user name and incoming mail server for the account) > MessageUidsAlreadyDownloaded.
    Delete the MessageUidsAlreadyDownloaded file and empty the Trash.
    Launch Mail and if successful, any previously downloaded messages that remain on the server will be downloaded again along with any new messages available at the server that have not been downloaded.

  • How do i merge my user accounts after migration assistant

    Hello,
    How do I merge my user accounts after migration assistant from a time machine back up?

    I wonder how to plan what account and rights to have where?
    I had my old original account on my iMac, and then I "migrated" the data to a user account, in order to have some advantages with that setup. So everything worked approximately ok in this setup.
    And yesterday, I tried migrating to a new Mac, and suddenly I get aware of the fact that the rights on these two earlier accounts were important.
    And especially, after doing the migration to the new machine twice, until I got the Mail working, I am now totaly bewildered what solution to aim for? How to merge the two migrated admin accounts - keeping the original admin account is also important, since my file system har special rights for that one.
    Could anyone give me more ideas about how to proceed? I think I have working Mail on one of the two migrated account (with 100 000 mails or so, it seems so...). The other account is the one I would like to have.
    Also I think I want to use a normal user account, not an admin account for my daily use. And I have to see if things still work if I turn off the admin rights...
    Thankful for any advice!
    /groundliner

  • I am unable to see any POP3 or IMAP tab when I set up an account in my iphone 4S. Hence by default all my email accounts become IMAP and the messages are deleted from the server when I delete them from the iphone.

    I am unable to see any POP3 or IMAP tab when I set up an account in my iphone 4S. Hence by default all my email accounts become IMAP and the messages are deleted from the server when I delete them from the iphone.

    ok sorry everyone but i solved it myself but the solution is so nuts i've posted it here to help others who have the same problem.
    to setup a comcast imap account on your iphone:
    go to mail, contacts, etc in settings
    under accts, select add account
    select "other"
    new screen, choose "add mail account"
    now on the new acct screen you must enter your name, email address and password for your GMAIL acct ! (yes i said your gmail acct !, or some other acct with a NON comcast address).
    hit next
    then the acct verifies
    when verified a screen will open with all the acct settings for this acct AND @ the top of the screen are the 2 buttons > imap or POP
    select imap and THEN CHANGE ALL THE ACCOUNT information to the comcast account !
    then hit next and the account will take a couple minutes to verify but it will verify and now you have a comcast imap acct set up on your iphone.  The problem must be that when the iphone sends the initial verify acct info to comcast (if you enter that information first) the comcast server is simply not setup yet to signal the iphone that there is an imap option.

  • How can I see my messages after restoring from backup?

    I have 2.1gb of messages saved in my storage on my 4s but they're not in messages after restoring from backup.
    How can I get all my messages back in my message app because I know they're their it's just a matter of getting them restored into the app.

    When you restored your phone from an old backup, it wiped ALL data from your phone and replaced it with the data from that backup.  It's like your phone went back in time. 
    Your data that was on the phone before you did the restore is now gone forever.  There is no way to get these data back.

  • "This message may not have been delivered to User Name because there was no response from the server." in IM chat

    Hello All, 
    Sometime users are getting below error message on the IM windows when they having P2P IM Chat. 
    "This message may not have been delivered to User Name because there
    was no response from the server."
    I can see below error on the Lync 2013 Monitoring page. 

    Hi,
    Please make sure all required ports have been allowed. You can verify that all ports are open can accepting connections using telnet.
    Telnet from External Client:
    Test to SIP.domain.com 443/SIP
    Test to WebConf.domain.com 443/PSOM
    Test to AV.domain.com 443/STUN
    Telnet from Lync 2013 Edge:
    Telnet to Pool.domain.com 5061/SIP
    Telnet from Lync 2013 Pool:
    Telnet to LyncEdge.domain.com 5061
    Telnet to LyncEdge.domain.com 443
    Telnet to LyncEdge.domain.com 5062
    Telnet to LyncEdge.domain.com 4443
    Telnet to LyncEdge.domain.com 8057
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • TS3899 Why can't I send email messages after 7.1?

    Why can't I send email messages after 7.1?

    Hi Honeylev,
    Welcome to the Support Communities!
    The article below will walk you through the troubleshooting steps for email on your iPhone:
    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    I hope this information helps ....
    Have a great day!
    - Judy

  • Email disappears after dragging from inbox to subfolder.

    Email disappears after dragging from inbox to subfolder. It is not lost because if it is unread it shows as an unread email in the sub folder. When I set the folder to view # of emails the # of emails shows next to the folder, but the actual emails do not.Also
    if the email that is moved to a subfolder has not been read it will show an unread email in the subfolder but still not be able to view the actual email.
    This does not happen on all subfolders.

    Tried resetting the view on that folder already? You can do this via the View tab.
    Otherwise, you'll have to share more details like at least your version of Outlook and type of email account.
    Robert Sparnaaij
    [MVP-Outlook]
    Outlook guides and more: HowTo-Outlook.com
    Outlook Quick Tips: MSOutlook.info

  • After Migration Assistant, Time Machine refuses to use old backups

    I've got to say I'm pretty disappointed with Time Machine.
    I just dropped $2,000 on my second-ever Mac, a 15" MBP (Core i7 2GHz, 4GB RAM, 500GB 5200rpm hard drive, the stock low-end 15" config).  From what I'd heard about Migration Assistant, I believed it would easily move my stuff over to my new Mac.  For the most part it did, but a few things didn't transfer.  Other posts on the topic detail them accurately - Desktop icon layouts, some settings, Growl, etc.
    I told Migration Assistant to use my Time Machine backups, which have been happening without incident for a long time.  My oldest backup is December 2010.
    Now that my new MBP is about 99% set up like my old MBP, I am having a problem with Time Machine.
    I get the error "Time Machine could not complete the backup.  This backup is too large for the backup disk.  The backup requires 355.61 GB but only 176.44 GB are available."
    Looking at the Time Machine drive in Finder, I found that Time Machine is trying to create a new folder for backups and do a full backup.  Where there was once one folder, "[My Name]'s MacBook Pro," there is now an additional folder, "[My Name]'s MacBook Pro 2."  Time Machine is trying to back up into that second directory.
    Now, I get it that this is a different computer.  But really, if I use Migration Assistant to restore my Time Machine backup, I think it would be safe for OSX to assume that I want to continue using those backups.  What is especially disappointing for me is, there were things that Migration Assistant did not restore properly.  I probably haven't found them all.  That makes it CRUCIAL that I have my Time Machine backups, but it seems that Apple thinks it's perfectly normal for me to want to FORMAT my Time Machine drive after Migration Assistant did a half-*** job of migrating my data.  I need those backups now more than ever.
    I do also have an online backup, but I still don't feel very comfortable destroying six months of local backups just to make Time Machine work again.  Both MBPs were running the same (latest) version of Snow Leopard, so it stands to reason all that needs to happen is a very small incremental backup.
    I have been Googling for hours.  All I've found is a procedure for 10.5 that doesn't work in 10.6 where I get down into the Terminal and change a MAC address in a file on the Time Machine volume.  But that's it.  In fact it seems like there's no answer.
    Come on Apple, you do everything else better than the competition.  Why do I have to nuke six months of backups or buy a new 2TB external drive to make Time Machine work again?  I assure you I want to continue making incremental backups against my old Time Machine backups, and promise to hold you not responsible should I screw something up by grabbing an old system file or something from February.
    Would appreciate any help anyone could offer.

    Did you use Setup Assistant when your new Mac first started up, or skip that, create a user account, then use the Migration Assistant app in your Applications/Utilties folder?
    If you used Setup Assistant, when you started your first backup you should have gotten the message in #B5 of Time Machine - Troubleshooting.  It sounds like you didn't (or chose Start New Backup).  And no, the Leopard procedure doesn't work on Snow Leopard.  That's what #B5 is for.
    Usually, if you use Setup Assistant, Time Machine will still say it's going to do a full backup, and make room for it, but actually do an incremental backup (very, very slowly).
    Either way, it usually deletes a lot of old backups.    We're hoping that will be fixed in Lion.
    Once it's decide to make a new backup, there's no known way to prevent it.

  • Crystal Reports XI connection problems - after updating to SQL Server 2008

    Hello!
    We have some ASP.NET 2.0 Applications that call some CR XI report files with parameters to generate PDF Files. After upgrading from SQL Server 2005 to 2008 the apps hang when trying to generate the PDFs. Some research with Fiddler showed that ever time a 401 Error is raised. Calling the reports directly from CR Designer with the same connection values and Parameter shows the appropriate data that means the log-in data iare functioning.
    I already tried switching the data source driver from OLE DB to SQL Native - no effect!
    Can it be that CR XI does not work with SQL Server 2008? Or is there an update for CR XI and SQL Server 2008?
    Because we are in a hurry I hope somebody can solve my problem(s) ...?!
    Thanks in advance,
    Frank

    Hi Frank,
    No CR XI is not supported nor is any version completely at this time. What we've found issues in so far are the Time(7) time is returned as a string value and Stored Procedure Data/time parameter SQL creation. The Time(7) field is an OLE DB driver issue with Microsoft but the Date/time SP issue is our issue and it's currently tracked and escalated. It will be fixed for CR 2008 with SP3 I believe. And I've asked that the same fix be rolled back to CR XI R2 but waiting on the reply from R&D if it can be done.
    What you need to do is download the trial version of CR XI R2 ( Release 2 ) and then use your XI Keycode to install it and it will work. Then update to the latest SP 5 Service Pack. XI is past it's end of life support which means there will be no updates or bug fixes any more.
    Next, MS SQL Server 2008 does not work with the MDAC version of the Native drivers, you must install the MS SQL Server Client. You'll see the driver name is "MS SQL Server Native client 10". This is the one you need to use.
    Another work around is to use ODBC, it seems to resolve all issues, but the client must be installed.
    Thank you
    Don

  • Hi, i am trying to open and view a report that comes from another server with different odbc connection

    hi, i am trying to open and view a report that comes from another server with different odbc connection
    i created a crystal report for a mysql database on my machine and everything works great
    but we have other reports that come from other machines with different odbc connection
    and this its not working when opens the report asks for credentials
    and i cannot use the remote ip for these reports that come from other machine
    question
    if i cannot connect to remote ip to open the report
    for each report i have to create a database the report database on my machine and then open the report ?
    or there is some other way to open the report ?
    i am using visual studio 2013 and mysql and
       <add key="MYSQLODBCDRIVER" value="{MySQL ODBC 5.3 UNICODE Driver}"/>
    thanks

    short
    i have a report that it was created on another server with a specific dsn
    now i am trying to open the report on my machine
    the database from the other server does not exist on my machine
    the server machine where the report was created the ip its not accessible
    question ?
    can i open the report on my machine or its impossible ?
    thanks

  • Login invalid on new MacBook after Migration Assistant

    Migration Assistant problem
    New computer: 15" MacBook Pro with Retina display (probably OS X Lion
    Old computer:  15"Macbook Pro running Mountain lion.
    My regular login password is invalid on the new computer after migration assistant - Not sure what to do.
    Any help is greatly appreciated.
    Thanks

    I managed to find a solution
    Here is the link:
    http://osxdaily.com/2010/08/10/forgot-mac-password-how-to-reset-mac-password/
    There are instructions to reset the mac password without a CD.  You set up a new admin account then you can reset the password to your original account.
    It solved the problem.

  • After updating from Lion 10.7.4 to 10.7.5, my MacBook Pro will not reboot.  Why?  What can I do about it?

    After upating from Lion 10.7.4 to 10.7.5, my MacBook Pro will not reboot.  Why?  What can I do about it?

    I ended up having to visit an Apple Store.  They claimed that the update must have aggravated an already corrupted hard disk drive.  The solution was to wipe my hard disk (fortunately I had recently backed up on Time Machine).  The "Genius" also claimed this was the first time he had come across the problem.  Although he was clearly able to diagnose it straightaway, and the next person he saw had exactly the same problem with his Mac, and I saw an awful lot of customers queuing up with their Macs and iMacs looking very suspiciously like they all had the same problem!  So clearly Apple know what the problem is but as usual treat customers as if they're idiots in order to cover up the problem.  But at least the problem is now solved (although having to take at trip out and wait in a queue at an Apple store, and then restoring from backups is a painstaking inconvenience I could well have done without).  All I can suggest is that you might as well take it in.  None of the "solutions" on the Forum are remotely on the ball, and all Apple "Geniuses" have clearly been told what the problem is and how to fix it.  Good luck!

  • I'm trying to scan but instead of the scan a message comes up from PS saying "An error occurred while communicating with the scanner." help- I cannot scan!

    I'm trying to scan but instead of the scan a message comes up from PS saying "An error occurred while communicating with the scanner." help- I cannot scan!

    Best practices: Usage
    Supply pertinent information for quicker answers
    The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    Adobe product and version number
    Operating system and version number
    The full text of any error message(s)
    What you were doing when the problem occurred
    Screenshots of the problem
    Computer hardware, such as CPU; GPU; amount of RAM; etc.

Maybe you are looking for