Users setting in SBO 2007

Hi There
Where in SAP 2007 users settings are? In 2004 version it was in system registry.
Regards
Tomasz Derus

Hi Tomasz,
it depends what user settings you're looking for.
the column preferences (order from the columns in a matrix) are stored in the CPRF table.
the label renamings are in SDIS
lg David

Similar Messages

Cannot find USA Local Setting in SBO 2007 release B

I tried to install SBO 2007 release B in my dummy computer today. However, I cannot find USA Local Setting when creating new company.
The only available countries are: Brazil, India, Japan, Korea, P.R. China, and Singapore. So the Chart of Account will follow these countries.
Did I miss something here?
See below for screenshot:
http://img299.imageshack.us/img299/6369/40428164wv0.jpg

Tom
2007 B is for Asia and Brazil. You will need 2007A to get USA local settings
Suda

User name & password to log on SBO Integration that comes with SBO 2007

Hi
I have installed the SBO 2007 Demo product. It istall the the b1i. I'm trying to log onto the Control Center. A web page comes up with fields to add user name and password. In the older version it was B1iadmin, but it doesn't do anything after typing it. Doesn't go in or say incorrect password.
Any assistnace greatly appreciated

Hi Louis,
I made the same mistake. In some part of a guide (don't have any document right now) says the user and password are the same of the database user.
HTH,
Ian

User setting upgrading to SBO 2007A

Hello,
We are in the process in upgrading a customer from 2005 SP 01 to SBO 2007A. Because the customer has over 50+ databases, each with their own user-settings (columns in documents etc.), I like to know if these settings are maintained in the process of upgrading to SBO 2007.
gr.
Freek

Hi there,
I don't think you can just choose which version you go with.
2007A has been released to these countries: Australia, Austria, Belgium, Canada, Chile, Costa Rica, Czech Republic, Denmark, Finland, France, Germany, Guatemala, Hungary, Ireland, Israel, Italy, Mexico, Netherlands, New Zealand, Norway, Panama, Poland, Portugal, Puerto Rico, Russia, Slovakia, South Africa, Spain, Sweden, Switzerland, UK, and the USA.
2007B has been released to: Brazil, China, Hong Kong, India, Japan, Singapore, and South Korea.
Regards,
Nat

CurrentPeriod property in SBO 2007

Hi all,
I tried to use the oSBOApplication.Company.CurrentPeriod() (I'm almost sure it was like it), but the result is always -1. I wrote a message to the support center and they tell me that this is a SBO 2007 behavior by definition, not a bug. Before I pull the trigger (just kidding), does someone have any logical explanation why this great new feature is like this? If not, at least how can I get the current period through UI API?
Thanks in advance,
Ian

Hi Owen,
Actually it's an addon UI/DI, so if there's a way in DI or I can look it just with SQL there'll be no problem at all. But there's no way to do that, because the current period just can be done with UI as there's no entry in the DB that tells the current period in which the current user is. I read a lot of threads about it, and I remember everyone was excited when this featured appeared.
Weird enough the formatted search $[Period] works!!! Of course I WON'T use a formatted search for an add-on. So if it's not a bug what else can it be? What about backwards compatibility? Changing behavior without even tell the partners about it? Sigh
SBO SDK Help Center 2007: <i>CurrentPeriod. The DI API Company Service can get and set posting periods in the application. However, you cannot get or set the current period (the default period in the Company database) via this service.
This property complements the DI API Company Service and allows you to get the current period from the application. To get all the properties of the current period, use the GetPeriod or Periods functions of the Company Service.</i>
Well Owen, if you (or anyone) find any solution or workaround please let me know.
Thanks,
Ian
PS. Owen, I think with this points you're now leading the Top Users in SBO. Congrats! You worked really hard on it!

Document line with price zero in SBO 2007 A

Hi All
We have a DI API AddOn that occationally has to create a document line with the total price of zero.
In SBO 2005 A we just set SBODocument.Lines.Price = 0, but that doesn't work in SBO 2007 A.
In 2007A when we set SBODocument.Lines.Price = 0 it takes the price from the pricelist as though we had not entered a price at all. If we set SBODocument.Lines.Price to something else that zero it does correctly take the price we entered.
We have tried to set SBODocument.Lines.UnitPrice or SBODocument.Lines.LineTotal to zero in stead but it gives the same result.
Any help appriciated.
Rgds
Jesper Carstensen

Sorry, my mistake.
The solution WAS indeed to set SBODocument.Lines.UnitPrice = 0
Rgds
Jesper Carstensen

Excel-Import with SBO 2007

Hello to all!
I have problems concerning the Excel-Import-function within SAP 2007.
I want to import some business partners (what should not be such a huge problem), but an internal error occures which states:
"internal error: Payment Methods for Payment Wizard (OPYM) (-2007) occured.
After I set up the Payment Wizard it is still not working - now the internal error stats: "(-2007)".
Experimentally, I tried to import the bp-data into an older version SAP BO 2005 - as personally expected no internal errors occured! even if i do not set up the Payment Wizard...
Here are some facts to our sbo 2007 version:
2007A (8.00.178)
SP: 00
PL: 44
I tried to find a thread upon this topic, but I could not find any. Maybe some of you might be able to help me! I am looking forward to it,
thanks a lot
daniel

Hi Daniel,
i had have similar problems by importing datas via excel function. My suggestion is to import step by step.
Select a few records and separate it into an extra excel sheet...(5-10 Records)
First try to import only CardCode, CardName, second try 2 records more. So you will find the records, that makes some trouble.
Regards Steffen
(P.S. I think it could be the g/l account definition, but i am not sure.)

Want to export user settings from Office 2007 on client, to be able to import in Office 2013?

Upgrading from Office 2007 to Office 2013. We may need to save the user settings on the client computer, because we are moving some of the systems from 32-bit to 64-bit. How can we export the settings to a folder?

Hi,
Could you please tell us what is included in user setting? Such as the customized Quick Access Toolbar settings, customize ribbon settings, or profile in Outlook?
Generally, we can’t upgrade operating system from 32-bit to 64-bit directly, we need to reinstall 64-bit operating system.
Office 2007 don’t provide the Import/Export button like Office 2010/Office 2013, we can’t export QAT setting and customize ribbon setting directly.
To customize an installation of Office 2013, you can use the Office Customization Tool (OCT) to perform tasks such as the following:
Specifying installation options
Customizing how Office applications and features are installed
Configuring default user settings
Managing additional content: add or remove files, registry entries or shortcuts
Configuring Outlook options: setting the default profile, adding email accounts, and specifying Exchange settings
For more detail information:
http://technet.microsoft.com/en-us/library/cc179097(v=office.15).aspx
Regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

SBO 2007 PL06 - GetCompanyList fails

Folks,
I am not able to get the list of companies on SBO 2007. The following code fails with "Failed to connect to SBOCommon" error.
try {
   SAPbobsCOM.Company c = new SAPbobsCOM.Company();
   c.Server = "Test17";
   c.DbServerType = SAPbobsCOM.BoDataServerTypes.dst_MSSQL2005;
   c.UseTrusted = "true";
   SAPbobsCOM.Recordset cl = c.GetCompanyList();
} catch (Exception e) {
   Console.WriteLine(e.Message);
Note that all other APIs work just fine. I am able to open connection to specific company and perform any programmatic operation. It is just that GetCompanyList fails.
I am running this code on the machine where SBO server is installed. So there are no network issues.
I have tried setting the server to "local," "(local)", "localhost", etc. Still no success.
I also tried setting UseTrusted to false and specified DbUsername and DbPassword. Still no success. As far as I know, GetCompanyList always uses trusted connection and ignores usrename/password fields.
Does anyone know what the problem could be?
Thank you in advance for your help.
Regards,
Pradeep

Hi
pls try this code,
oCompany = New SAPbobsCOM.Company
            If cmbServertype.Text = "SQL SERVER 2005" Then
                oCompany.DbServerType = SAPbobsCOM.BoDataServerTypes.dst_MSSQL2005
            Else
                oCompany.DbServerType = SAPbobsCOM.BoDataServerTypes.dst_MSSQL
            End If
            oCompany.Server = "Test"
            oCompany.language = SAPbobsCOM.BoSuppLangs.ln_English
            oCompany.DbUserName = "sa"
            oCompany.DbPassword = "SQL"
             oRecordSet = Me.oCompany.GetCompanyList()
            Me.oCompany.GetLastError(lErrCode, sErrMsg)
            If lErrCode <> 0 Then
                MsgBox(sErrMsg)
                Exit Sub
            Else
Msgbox("Connection Success")
endif
Regards
Senthil Kumar

Installing SBO 2007 Error Unable to connect to database

Trying to install SBO 2007.
First install server tools, then sever.
The SBO -Common database exists as per checking the SQl database.
The install asked for the database server, database name, user name and password in which I enter this correctly.
A message states:
WARNING
'Unable to connect to database;verify database server name and that database is started'.
I am unable to proceed further. Can any on assit please.
Have also tried un installing SBO 2007, deleting databases and rebooting - without success.

Dear Lisa,
You will get this issue when you are using named/non-default instance of MS SQL Server during the installation progress
of SAP Business One Integration Platform.
The B1iP installation program uses default port (1433) to connect MS SQL
Server and to create database. The named instance will use the port
other than 1433.
1. Before the installation of B1iP, change the port of the named
    instance to 1433, which will be used to install B1iP.
2. If 1433 is being used by another application, and cannot be changed,
    the steps below is one walk-around way:
    a) Stop the instance of MS SQL Server, which is using the port 1433
    b) Change the named instance, which will be used to install B1iP, to
       1433 temporary, and remember the port to recover
    c) Install B1iP (or SAP Business One with B1iP component)
    d) After installation, stop the B1i service. Under B1i folder, in
       the Xcellerator.cfg, change 1433 to the port that B1iP DB
       instance used.
    e) Change back the ports of SQL Server.
    f) Run the service of SQL Server and B1i again.
Regards,
Rakesh Pati
SAP Business One Forum Team

Error -111 Conecting Database (SBO 2007)

Hi gurus.
I'm developing an addon with SBO 2007 and I create another company object for referencing different Database
I conect this one like:
oCompany2.Server = oCompany.Server
oCompany2.LicenseServer = oCompany.Server & ":30000"
oCompany2.CompanyDB = mMatriz.Columns.Item("c_bbdd").Cells.Item(i).Specific.string
oCompany2.UserName = lUsuario
oCompany2.Password = lPassword
oCompany2.UseTrusted = True
oCompany2.Connect
Obtaining error code -111: Failed to Connect to SBOCommon
User, password and LicenseServer are ok.
Any ideas?
Thnx in advance!

DbUser and DbPassword are required

FontFace and FontSize in SBO 2007

Hello.
In SBO 2005, the font properties were stored in the system registry (if you had modified the default one at least once...).
The values were situated in the "HKEY_CURRENT_USER\Software\SAP\SAP Manage\SAP Business One" key, and named FontFace and FontSize.
However, in SBO 2007, I can't find these values. The key itself exists and contains a few values, but it doesn't contain FontFace and FontSize.
Does anyone know where I can find the font properties in SBO 2007??
Thanks in advance.
Martin

Hello,
I know this thread is closed and written a long time ago but I just add the answer, as people like me can make search into the forum to find it.
I wrote a note to SAP, below is the answer
Sébastien
In version 2007A there is a registry xml which is saved under:
c:Documents and SettingsLocal SettingsApplication DataSAP
SAP Business One
The file is 'b1-current-user.xml'.
You can find the font size information on the font there.

Default User setting at Dashboard level

Hi SAP Users,
i want default dashboard user setting & all users will only see my setting
Is it possible to have default user setting for dashboard?
Regards
Ravindra

In the administration mode, you can update the current configuration settings/layout (right-click on the UI group you want to update, can be a dashboard, a field...) and save them as the default (standard) settings.
Please try with the administration url I provided you with, and let me know if it helps.
http://server:port/irj/portal?sap/bc/webdynpro/sap/cprojects?sap-config-mode='X'
Matthias

Copy A/R Invoice to Credit Memo SBO 2007

Hello All,
I am currently facing an issue on SBO 2007.
I have an A/R Invoice and I want to copy it into Credit Memo. I am able to use COPY TO on A/R invoice form. But I am not able to use COPY FROM on form Credit Memo... The invoice is not on the list of all the invoices for this customer to select.
This issue happened only for this one invoice.
Thank you in advance for your help.
Regards
Petr

Hello,
there is one credit memo already done for this invoice (about 1/3 of invoice) and for the rest is open balance in place. The invoice has status open.
I do not know how was the first credit memo done (from form Invoice - copy to or from form Credit memo copy from - but still should not affect other credit memo and theit creation)
Thank you in advance
Regards
Petr

So I just bought a used MacBook from Amazon with OSX 10.5.8. I am trying to install new software and operating system, but I don't have the passwords to the Users set up in the computer. What do I do?

So I just bought a used MacBook from Amazon with OSX 10.5.8. I am trying to install new software and operating system, but I don't have the passwords to the Users set up in the computer. What do I do?

Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Reset Password. After resetting the password use Startup Disk from the same menu to choose your hard drive for startup and restart.

Users setting in SBO 2007

Similar Messages

Maybe you are looking for