Users\tc\AppData\Roaming\sp.DLL, module could not be found

can anyone really give me some good advise on how to fix this error?
I greatly appreciate it...

What I would do if I encountered that situation:
check the computer for malware;
use a program like CCleaner (Tools | Startup) to see what could possibly try to invoke that non-existant dll file.

Similar Messages

HPStatusBL.dll module could not be found

Before I installed my new HP printer, I uninstalled my HP Deskjet 3050A J611 series printer through Windows 7 uninstall program. Now everytime I boot up I get the following message:"There was a problem starting C:\Program Files\HP\HP Deskjet 3050A J611 series\bin\HPStatusBL.dll. The specified module could not be found."This does not affect the behavior of my computer, nor does it affect the working of my new HP printer. But I can't figure out how to get rid of this message.Help!Thank you to anyone who can help me.

Intruderscooter wrote:
After exhaustive research...this is the HP Monitor Ink status dll. It is heavily embedded in the computer and is not so straightforward to locate. Here is the path I took: MSConfig / Startup / Monitor Ink - this tells you where the .dll is locatedwithin your system. Follow that specific path and then delete the file. For example, for me it was one of the two paths below (can't remember which of the two now) but as long as you start with MSConfig / Startup it will get you there. You may also want to ensure that it is not running as a Service within MSConfig under the same name (Monitor Ink)Again, mine was embedded under one of these paths (as an example):
C: Windows / Users / (your name) / Roaming / Startup / Monitor Ink shortcut (delete this)e or...
C:Windows / Users / (your name) / Roaming / Application Date / Startup / Monitor ink shortcut (delete this)
Like I said, it is heavily embedded and each user configuration may be a bit different so start by finding the path within MSConfig / Startup / Monitor Ink. Hover over the location and it will identify the exact path.I would like to thank you for solving my "RunDLL Error" problem, I used your information and now the error is fixed.Thank You, Thank You, Thank you. P.S. Thank You. I wish you a great and wonderful healthy life.

Vedrsioncue.dll Module Could Not Be Found

I have been running Adobe "eLearning Suite" for over a year and have in the past week encountrered "Specified Module could not be found C:Program Files\Common Files\Adobe\Adobe cs4\Client\4.01\versioncue.dll
Running 64 bit in Windows 7 -- Error message comes up in almost all programs when I right click and on some programs when I try to run them. I am frustrated.

Sounds like you deleted, or failed to copy, many of the support files used by Adobe applications.
Reinstalling the applications is your best bet.

C:\Users\..\AppData\Roaming\lprers.dll; The specified module could not be found."

Recently, when I reboot/start up my Windows 7 HP laptop, an error pops up: "There was a problem starting C:\Users\..\AppData\Roaming\lprers.dll; The specified module could not be found." How do I fix this?
I have already run the Malwarebytes Anti-Malware program to remove all "threats", "viruses"; etc.

Recently, when I reboot/start up my Windows 7 HP laptop, an error pops up: "There was a problem starting C:\Users\..\AppData\Roaming\lprers.dll; The specified module could not be found." How do I fix this?
I have already run the Malwarebytes Anti-Malware program to remove all "threats", "viruses"; etc.
Very few authentic dll files reside in that folder. It sounds as though you’ve had a recent infection and one of your ‘anti’ programs has removed the malware files, or some of them, but missed the entry in the registry, possibly due to an out-dated definitions
database.
Try one of these, but it is prudent to create a system restore point before you change the registry in (1) below by going to Control Panel > All Control Panel Items > System > System Protection (in the left pane) > System Protection Tab >
Create and make sure you give it a meaningful name.
1. The entry is probably in one of the \Run keys, but as the rascal could be hiding in a number of other keys, it’s quicker to search the whole registry. Open a Run window (Windows Logo key+R), type regedit and press Enter. Click Edit > Find and type the
rogue’s name, put ticks in Keys, Values and Data, then click Find Next. When it’s found in the right pane, right-click it and delete it. There should be only one entry but press F3 to continue searching, just to confirm there are no more.
2. If you’re concerned about making registry changes disable the entry using the system configuration utility, but bear in mind that you’re disabling the entry not deleting it as you would in (1) above. Open a Run window (Windows Logo key+R), type msconfig
and press Enter. Go to the Startup Tab and remove the tick alongside the rogue’s name. Click Apply, OK, etc. and restart the computer. When it restarts, put a tick in ‘Don‘t show this again‘ as you‘re effectively doing a selective start up.

There was a problem starting c:\users\tom\appData\local\Apps\Apple Computer\xvgtv.dll The specified module could not be found

I get error on Windows startup. I have iCloud installed as well as other apple software.
error:
there was a problem starting c:\users\tom\appData\local\Apps\Apple Computer\xvgtv.dll The specified module could not be found.

I get error on Windows startup. I have iCloud installed as well as other apple software.
error:
there was a problem starting c:\users\tom\appData\local\Apps\Apple Computer\xvgtv.dll The specified module could not be found.

RUNDLL There was a problem starting Appdata/Roaming/Wisdl.dll The specified module could not be found.

Every time I start my laptop, this message box pops up.
RUNDLL
There was a problem starting _____ Appdata/Roaming/Wisdl.dll
The specified module could not be found.
Other then being a pain in the neck it does not seem to cause any performance problems. I can not find any internet help in fixing this issue.
Thanks for any help
Richard

Every time I start my laptop, this message box pops up.
RUNDLL
There was a problem starting _____ Appdata/Roaming/Wisdl.dll
The specified module could not be found.
Other then being a pain in the neck it does not seem to cause any performance problems. I can not find any internet help in fixing this issue.
Thanks for any help
Richard
Richard
It sounds as though you’ve had a recent infection and one of your ‘anti’ programs has removed the malware files, or some of them, but missed the entry in the registry, possibly due to an out-dated definitions database. I suggest you, firstly, download and
run the free Malwarebytes' Anti-Malware from
http://www.malwarebytes.org/free/ to ensure that you are completely clean. If you then restart the computer and the message is still appearing try one of these, but it is prudent to create a system restore point before you change the registry in (1) below
by going to Control Panel > All Control Panel Items > System > System Protection (in the left pane) > System Protection Tab > Create and make sure you give it a meaningful name.
1. The entry is probably in one of the \Run keys, but as the rascal could be hiding in a number of other ‘autorun’ keys, it’s quicker to search the whole registry. Open a Run window (Windows Logo key+R), type regedit and press Enter. Click Edit > Find and
type the rogue’s name, put ticks in Keys, Values and Data, then click Find Next. When it’s found in the right pane, right-click it and delete it. There should be only one entry but press F3 to continue searching, just to confirm there are no more.
2. If you’re concerned about making registry changes disable the entry using the system configuration utility, but bear in mind that you’re disabling the entry not deleting it as you would in (1) above. Open a Run window (Windows Logo key+R), type msconfig
and press Enter. Go to the Startup Tab and remove the tick alongside the rogue’s name. Click Apply, OK, etc. and restart the computer. When it restarts, put a tick in ‘Don‘t show this again‘ as you‘re effectively doing a selective start up.
Ninety-nine per cent of politicians give the rest a bad name.

I continue to have an Adobe error when booting up my computer. It reads: this specific module could not be found. \AppData\local\diagnostics\tlfpizv.dll

I continue to have an Adobe error when booting up my computer. It reads: this specific module could not be found. \AppData\local\diagnostics\tlfpizv.dll
Please tell me there is a fix that does not involve buying a computer clean sweep program.

Hi brigitta2,
You might be getting the error message because of any of the following reasons:
.dll files are corrupt or missing
Attack of malware or other spyware
Incorrect installation of applications
Damaged Windows registry
Old Windows device drivers that need to be updated
The problem can be sorted if you know the exact reason behind the same. Please let me know the exact error message that appears on your screen.
If the issue is with damaged files then you might need to replace them or if it is a system issue, then please take your laptop to an expert who can deal with system issues.
Regards,
Anubha

Dboraslib.dll - Error 126 : "The specified module could not be found."

Hi,
After installation XI 3.0 and adapters, the dispatcher(dispwork.exe) is failing to start in a ABAPJ2EE system (web AS 6.40).
The dev_disp trace file shows the following error:
Please do help to resolve this problem.
trc file: "dev_disp", trc level: 1, release: "640"
Mon Aug 09 12:14:43 2004
kernel runs with dp version 124000(ext=101000) (@(#) DPLIB-INT-VERSION-124000-UC)
length of sys_adm_ext is 524 bytes
ERROR => DlLoadLib: LoadLibrary(dboraslib.dll) Error 126 [dlnt.c       237]
        Error 126 = "The specified module could not be found."
systemid   560 (PC with Windows NT)
relno      6400
patchlevel 0
patchno    1
intno      0
make:      multithreaded, Unicode
pid        2908
***LOG Q00=> DpSapEnvInit, DPStart (00 2908) [dpxxdisp.c   1093]
     shared lib "dw_xml.dll" version 1 successfully loaded
     shared lib "dw_xtc.dll" version 1 successfully loaded
     shared lib "dw_stl.dll" version 1 successfully loaded
     shared lib "dw_gui.dll" version 1 successfully loaded
Mon Aug 09 12:14:48 2004
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3878]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm)          10528     (1316)
DpShMCreate: sizeof(tm_adm)          2506872     (12472)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpShMCreate: sizeof(comm_adm)          290000     (580)
DpShMCreate: sizeof(vmc_adm)          0     (372)
DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY          (addr: 06440040, size: 2919328)
DpShMCreate: allocated sys_adm at 06440040
DpShMCreate: allocated wp_adm at 06441B58
DpShMCreate: allocated tm_adm_list at 06444478
DpShMCreate: allocated tm_adm at 064444A0
DpShMCreate: allocated wp_ca_adm at 066A8518
DpShMCreate: allocated appc_ca_adm at 066AE2D8
DpShMCreate: allocated comm_adm_list at 066B0218
DpShMCreate: allocated comm_adm at 066B0230
DpShMCreate: allocated vmc_adm_list at 066F6F00
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 066F6F28
DpShMCreate: allocated wall_adm at 066F6F30
MBUF state OFF
Mon Aug 09 12:14:49 2004
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 614 MB
<ES> 613 blocks reserved for free list.
ES initialized.
Mon Aug 09 12:14:52 2004
J2EE server info
start = TRUE
state = STARTED
pid = 3216
argv[0] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[1] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[2] = pf=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1352
argv[5] = -DLISTEN_PORT=1353
argv[6] = -DSAPSYSTEM=00
argv[7] = -DSAPSYSTEMNAME=SXI
argv[8] = -DSAPMYNAME=cgnlpt036_SXI_00
argv[9] = -DSAPPROFILE=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
argv[10] = -DFRFC_FALLBACK=ON
argv[11] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.0 2.0 3.1.1) [dpxxdisp.c   1455]
***LOG Q0K=> DpMsAttach, mscon ( cgnlpt036) [dpxxdisp.c   9701]
Mon Aug 09 12:14:54 2004
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
DpMsgAdmin: Set patchno for this platform to 1
Release check o.K.
Mon Aug 09 12:15:33 2004
ERROR => W0 (pid 3224) died [dpxxdisp.c   12152]
ERROR => W1 (pid 3232) died [dpxxdisp.c   12152]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3240) died [dpxxdisp.c   12152]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3248) died [dpxxdisp.c   12152]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3256) died [dpxxdisp.c   12152]
ERROR => W5 (pid 3264) died [dpxxdisp.c   12152]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 3272) died [dpxxdisp.c   12152]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 3280) died [dpxxdisp.c   12152]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-3224 (SIGUSR2)
ERROR => DpWpKill(3224, SIGUSR2) failed [dpxxtool.c   2464]
killing W1-3232 (SIGUSR2)
ERROR => DpWpKill(3232, SIGUSR2) failed [dpxxtool.c   2464]
killing W2-3240 (SIGUSR2)
ERROR => DpWpKill(3240, SIGUSR2) failed [dpxxtool.c   2464]
killing W3-3248 (SIGUSR2)
ERROR => DpWpKill(3248, SIGUSR2) failed [dpxxtool.c   2464]
killing W4-3256 (SIGUSR2)
ERROR => DpWpKill(3256, SIGUSR2) failed [dpxxtool.c   2464]
killing W5-3264 (SIGUSR2)
ERROR => DpWpKill(3264, SIGUSR2) failed [dpxxtool.c   2464]
killing W6-3272 (SIGUSR2)
ERROR => DpWpKill(3272, SIGUSR2) failed [dpxxtool.c   2464]
killing W7-3280 (SIGUSR2)
ERROR => DpWpKill(3280, SIGUSR2) failed [dpxxtool.c   2464]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:43 2004
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long)               Mon Aug 09 06:45:43 2004
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program Cl User         Action                    Table
0 DIA     3224 Ended         no      1   0             0
1 DIA     3232 Ended         no      1   0             0
2 UPD     3240 Ended         no      1   0             0
3 ENQ     3248 Ended         no      1   0             0
4 BTC     3256 Ended         no      1   0             0
5 BTC     3264 Ended         no      1   0             0
6 SPO     3272 Ended         no      1   0             0
7 UP2     3280 Ended         no      1   0             0
Dispatcher Queue Statistics               Mon Aug 09 06:45:43 2004
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          13
wake_evt_udp_now     0
wake events           total     9, udp     6 ( 66%), shm     3 ( 33%)
since last update     total     9, udp     6 ( 66%), shm     3 ( 33%)
Dump of tm_adm structure:               Mon Aug 09 06:45:43 2004
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks               Mon Aug 09 06:45:43 2004
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:48 2004
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3216)
killing process (3216) (SOFT_KILL)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
NiSelClear: removed hdl 3 from selectset
DpDelSocketInfo: del info for socket 3 (type=7)
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 456
NiSelClear: removed hdl 4 from selectset
DpDelSocketInfo: del info for socket 4 (type=9)
NiBufClose: clear extensions for hdl 4
NiBufSetStat: bufstat of hdl 4 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 4 / socket 448
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3172) (SOFT_KILL)
Stop icman
killing process (3196) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3172 HANDLE:472)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:49 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3172 HANDLE:472)
[DpProcDied] Process died (PID:3196 HANDLE:464)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
[DpProcDied] Process lives (PID:3216 HANDLE:440)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:50 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:51 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:52 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:53 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:54 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:56 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:57 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:58 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:59 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:00 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:01 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:02 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:03 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:04 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:05 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:06 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3216 HANDLE:440)
NiIMyHostName: hostname = 'cgnlpt036'
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name          -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   9927]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 5 from selectset
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 5
NiBufSetStat: bufstat of hdl 5 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 5 / socket 368
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2908) [dpxxdisp.c   8460]
Good Bye .....

Hi,
Thanks for the reply.
dboraslib.dll is properly installed - I checked the registry and physical location of the file.
The problem was : Environment variable "Path" not being set properly for the "oracle jre".
Solution:
After setting the path, the dispatcher started to run properly without any problems.
Path=<Drive>\oracle\ora92\bin;<Drive>\Program files\Oracle\jre\1.3.1\bin; <Drive>\Program files\Oracle\jre\1.1.8\bin
FYI - We are using WIN2K with SP4 and oracle DB 9.2
Regards,
Sridhar

Oraoledbpus.dll: The specified module could not be found

We are trying to access an Oracle 9.1 database through a Crystal report that uses the Oracle ODBC driver v9.02. The report is generated through an ASP page running on IIS 6 and a Windows 2003 server.
We get a popup on the server console intermittently with the following error:
Oraoledbpus.dll: The specified module could not be found
We have checked the security settings on the Oracle Home directory and assigned appropriate access to all the following:
Administrators
SYSTEM
Authenticated Users
IUSR
ASPNET
We have also checked that the Oracle Home bin directory is in the PATH. This dll does exist in the bin directory. When the report is run in the Crystal Reports designer there is no problem. The strange things is that the Data Source used by the report is ODBC and not Ole DB.
Any ideas or suggestions would be much appreciated.

Hello buddy!
Make sure there is no dll dependence missing. You can try using Dependency walk tool.
Igor Monteiro

OraOledbous10.dll Specific module could not be found

To Any Oracle experts,
I have downloded the latest Oracle 10g Vista\XP client 10.2.03 which includes the OraOledb ADO drivers. I am getting a spuradic error :
"OraOleDBpus10.dll .. Specific module could not be found." My Oracle database is 9i ..
Strangly enough .. this only occurs when I run my executable from my local drive ( xp sp3 ) . if I place the executable on a network drive .. running it from my box ( same box ) .. the error does not occur ..
I am new to this forum .. I am using a TOLeAuto() class from xHarbour and Borland's C++ 5.5 compiler. The below code is the syntax. I loaded the Oracle database utilities, SQL+ and the Windows Drivers which includes the OraOledb. I know the setup is working because I can connect with the SQL+ utility so I know my tnsnames and sqlnet.ora files are correct.
Again .. this error only shows up sporadically on my local xp-sp3 box .. I have not loaded it on Vista .. and forget about Windows 7 .. the client will not even install because the OS version number is out of range.
The paths are correct, and my compiled program runs from a network .. just not ( always ) on my local xp sp-3 machine .. especially seems to happen after a run-time failure of my application. This is an app in development and I wil lhave run-time failures constantly.
Any advice would be quite helpful
Rick Lipkin
SC Dept of Health, USA
xPROVIDER := "OraOledb.oracle"
xSOURCE := "efis"
xUSERID := "suntrack"
xPASSWORD := "xxxxxxxx"
oRs := TOleAuto():New( "ADODB.Recordset" )
oRs:CursorType := 3 // opendkeyset
oRs:CursorLocation := 3 // local cache
oRs:LockType := 3 // lockoportunistic
cSQL := "SELECT FAC.LOCAL_FACIL_EID, "
cSQL += "FAC.TANK_OWNER_EID, "
cSQL += "FAC.SITE_NUM AS SITE_NUM, "
cSQL += "STANDARDTASKS.GETNAME( LOCAL_FACIL_EID,'NO_NUM' ) AS FACILITY, "
cSQL += "ADDR.ADDRESS_1 AS ADDRESS, "
cSQL += "ADDR.CITY AS CITY, "
cSQL += "ADDR.STATE_CODE AS STATE, "
cSQL += "STANDARDTASKS.GETNAME( FAC.TANK_OWNER_EID,'NO_NUM' ) AS OWNER, "
cSQL += "FAC.LOCKED_IND AS READ_ONLY "
cSQL += "from SUNTRACK.EFIS_UST_FACILITIES FAC, "
cSQL += "SUNTRACK.ADDRESSES ADDR "
cSQL += "where ADDR.OWNER_EID = FAC.LOCAL_FACIL_EID "
cSQL += "AND ADDR.ADDRESS_TYPE_CODE = 'BUSINESS' "
cSQL += "AND ADDR.STOP_DATE IS NULL order by site_num"
TRY
oRS:Open(cSQL,'Provider='+xPROVIDER+';Data Source='+xSOURCE+';User Id='+xUSERID+';Password='+xPASSWORD )
CATCH oErr
MsgInfo( "Error in Opening EFIS_UST_RELEASES table" )
oWndChild:Show()
RETURN(.F.)
END TRY

Would you resolve this problem? I have the same problem.

API Support.DLL Specified Module Could Not Be Found Error

Dear Sir/Madam,
While Starting my laptop the following error message is displaying on my desktop screen:
"There was a problem Starting
C:\user\dell\app data\local\conduit\API support\API support.dll
The Specified Module could not be found"
Kindly help me to resolve this problem as soon as possible.
Regards,
Chirag Agarwal
{REMOVED}

Hi,
Please try to restore the system back to the point before the issue happened.
If the issue persists, test in Clean boot mode and Safe mode.
How to perform a clean boot
http://support.microsoft.com/kb/929135
If the issue doesn’t appear, you can determine which one can be the cause by using dichotomy in MSconfig. Checking on half of Non-Microsoft service and restart, determining which half of the services cause the issue and repeating to check half of the problematic
half services.
Let us know which service or startup cause this pop-up.
Kate Li
TechNet Community Support

System.DllNotFoundException: Unable to load DLL 'OraOps10.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)

Hi,
I have a asp.net web application running on windows server 2008 with oracle server 10g installed.
now we are planning to run application on another server with same server as database server. but when the deployed on new server the login page comes up and after login System.DllNotFoundException: Unable to load DLL 'OraOps10.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) exception is thrown. any help would highly be appreciated.

Did you run the ODAC installer, OUI or xcopy, or did you just copy over Oracle.DataAccess.dll to the new machine? If the latter, then you need to run the installer to put in all the necessary Oracle DLLs ODP.NET references.

Error :the specified module could not be found --oci.dll : Oracle9i

hi ,
i m trying to connect thru my java code to the oracle on my system ,while creating the DSN it gives the error
"the specified module could not be found" for the file oci.dll.
earlier it was not able to look for the sqresus.dll which i copied to the winnt/system directory , and after this oci error is coming , anyone knowing it please guide
with regards,

Make sure it is the same version of 9i (i.e. 9.0.x or 9.2.x) for both OO4O and ODBC. Also make sure that the ORACE_BASE\ORACLE_HOME\BIN directory is in your search path AND last, check your windows directories and subdirectories for duplicate copies of OCI.DLL (or anywhere else on the PC for that matter). Sometimes MicroSoft will include one and it is usually an OLD one.

Error messages: "itunesobjspl/jenetsvc.dll The specified module could not be found." And Error -2032 "Quicktime failed to initialize."

I initially got the Error -2032 message after downloading the newest version of itunes. I read a geek blog that said to uninstall Quicktime and I did that a bunch of times. I also uninstalled and reinstalled itunes repeatedly. None of this works. I noticed that the apple website said the requirements for the new quicktime/itunes download included an intel processor and I have a celeron processor, so I wondered if that was the problem, although everything has been running fine up until now, so I don't know. It also doesn't address the missing .dll file, but I may have accidentally deleted that because I went into the registry to try and unload some Quicktime files when I uninstalled Quicktime. I did this at the suggestion of the blog, but I may have screwed it up. Now I need to repair the missing .dll and still try to get itunes running

ErikEJ wrote:
Have you set your solution target to "Any CPU" ?? If so, set to "x86", as SQL Compact only runs in WoW mode on x64. Or use corflags.exe /32BIT+ against your project output (.exe file).
ErikEJ wrote:
Look at this blog post for a walk-through: http://erikej.blogspot.com/2008/01/x64-and-sql-compact.html
Hello everyone,
I have the same problem as mentioned above "Unable to load DLL 'elev.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) ", when trying to load the dll file into a window application. I developed a window application in VS2005 and want to import a dll file from another program into my project and use it. But when I try to call one of the function in the dll file, I got the error message "Unable to load dll 'elev.dll". I try all options that say it works to solve this problem, but somehow it doesn't work for me. I put the "elev.dll" file in the bin folder and use P/Invoke to import the dll file into my project. Can anyone help me out with this? thanks and really appreciated!
Here is how I import the dll:
[DllImport(@"D:\elev.dll")]
//[DllImport("emap.dll", SetLastError = true)]
private static extern void EMA_Init();
and in the code, I call the function above but failed to load the dll file
EMA_Init();

Module could not be found: VersionCue.dll

Currently, whenever I attempt to start Photoshop CS4 Extended, it launches fine. However, when I try to open a document (doesn't matter whether it's an old photo or a new blank one), I get an error:
The specified module could not be found. C:\Program Files\Common Files\Adobe\Adobe Version Cue CS4\Client\4.0.0\VersionCue.dll
I have tried to find a solution (particularly here), but not to much avail . I'm currently using Windows 7 Ultimate, 32-bit.

Your welcome. I found on the Adobe download page the 4.0.1 version cue update for windows. When you download it make sure you right click on it and run as admin.
Also if you have a download problem turn off popup blocker in Internet explorer.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4218
Edit: Make sure nothing Adobewise is running or running in the background before install.

Users\tc\AppData\Roaming\sp.DLL, module could not be found

Similar Messages

Maybe you are looking for