Users VPN drops after every 5 mins

                   Hi everyone,
We have user whose remote VPN drops after every 5 mins.
Need to know whats things i can check to troubleshoot the issue?
User connects by RSA Token.
ISP connection is ok its not issue.
Any thing i can check in ASA ?
Thanks
Mahesh

On the client side, have you tested wired vs wireless to see if the problems exists in both?  If it's only one of them but not the other, try updating the drivers.  Also, if it's windows 7, take a look at the power settings in control panel.  I've seen where agressive power settings will shut off the network port when idle.  Not that big of a deal in a LAN environment but it wreaks havoc on VPN.

Similar Messages

  • Remote App on iPad connects but drops after about  20 mins. Need to turn  off wait about 1 minute then turn on wifi on iMac before it can reconnect. Need some help please.

    Remote App on iPad connects but drops after about  20 mins. Need to turn  off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
    Already gone through troubleshooting guide a zillion times. Thanks.

    This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
    I got my artwork and saved it to my Desktop
    Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
    Clicked "resize" and a box for changing it opened up
    Checked the box "Pixels" and "Unchecked maintain aspect ratio"
    Set Horizontal for 640 and Vertical for 480
    Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
    It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
    Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
    Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
    Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
    Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.

  • My ipad atomatically gets switched off after every 5 mins

    From first day only my ipad atomatically gets switched off after every 5 mins and then atomatically gets on after 2-3 mins. is it a hardware problem or some problem in settings? if anybody knows the solution then please let me know....

    Is this a brand new iPad2. Did you notice this occurring before you started adding apps? Is this is occurring if you do not have any apps you have started running either active or in the background?
    If you have already tried powering off the device, you can try to do a hard reset (Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears, ignore the red slider, let go of the buttons.) and see how it runs without starting any apps.
    I do not have instructions for doing a restore but that is the only other step that I think of that you can take to resolve a software based problem.
    If you are still seeing the behavior after trying most or all of the above, I  would suggest taking it in or returning it for service.

  • Broadband keeps dropping out - every 20 mins or so...

    This is getting beyond a joke now so really hope someone can help fix this for me.  The broadband started dropping out every 20 mins or so about 6 weeks ago and is just getting worse.  Any moderators reading this - if I can't get it sorted I'm leaving BT.
    Have read a few posts and I think this is the info I need to provide.
    I have a Home Hub 3.
    Speed test on the line gives download speed of 4.85Mbps and an IP profile of 5.87Mbps.
    Upstream test gives 1.18Mbps and a Rate IP profile of 0.83Mbps
    I performed the quiet line test and the line was perfectly quiet with no crackles or hisses.
    The ADSL stats are below.  
    Anything anyone can do to help will be much appreciated.
    Thanks
    Phil
    ADSL Line Status
    Connection information
    Line state:
    Connected
    Connection time:
    0 day, 00:28:38
    Downstream:
    6,653 Kbps
    Upstream:
    1,132 Kbps
      ADSL settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.5 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    6.8 dB / 6.4 dB
    Line attenuation (Down/Up):
    26.0 dB / 12.5 dB
    Output power (Down/Up):
    0.0 dBm / 12.3 dBm
    FEC Events (Down/Up):
    2878 / 12
    CRC Events (Down/Up):
    0 / 11
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    Loss of Link (Remote):
    0
    HEC Errors (Down/Up):
    25 / 8
    Error Seconds (Local/Remote):
    0 / 1

    Hi Welcome to the forums
    Here is a basic guide to getting help from the community members done by CL Keith Please read through the link posted http://forumhelp.dyndns.info/speed/first_steps.html
    once you have posted the information asked for then the community members can help you more
    Thank You
    This is a customer to customer self help forum the only BT presence here are the forum moderators
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Machine hangs after every 30 min

    I have lonovo notebook,and am facing strange problem. the keyboard ,tap pad and pointer becomes unresponsive after every 30 minutes and i have to restart it to start work again. Also, it takes more than 5 minutes to start.
    I called the lenovo the support people, but the support guy was extemely rude and un-coperative and  thrice cut the communication  without any reason, any help, and information. Twice he hanged the phone telling that my warrenty period is expired. ( i have purchased it just before just 6 months).
    I dont know now what to do, as am tired of the machine's hangs and restarts.
    and am too much unhappy with the kind of after-sales support division of lenovo.  Its very frustrating and i would never recommand anybody to buy lenovo.    

    Keep Activity Monitor open (or some other monitoring utility) and see what happens to your free memory while you're working in FCP.  If it is all being depleted you may want to get an app that frees up memory. I can't recommend one because I just use Terminal and find does an OK job. However, there have been several threads about this where users have recommended specific apps. They should be findable with a search.
    Russ

  • Nokia E6 - Signal Drop after every call

    Hi,
    I have started to face this problem for the last 8-10 days.
    After every call is completed there is a signal drop for about 30-40 seconds. It drops to zero & then comes back to full strength again.
    I have updated the phone software to the latest version and still have the same problem.
    There is no problem if I use my sim card in any other phone.
    Thanks for your solutions in advance.
    Cheers
    KD
    Solved!
    Go to Solution.

    Hey,
    Thanks a ton...working for me so far for the last 3 calls...
    If only you had replied earlier ...it would have saved me from going to the Nokia Service Center, who told me to change my SIM card...which I did as well with no solution. LOL
    I wonder where the nokia moderators are ..not even one reply for almost 3 days now..
    anyways ..thanks a ton buddy
    Cheers
    KD

  • Wireless connection drops after bout 5 min - HP all in one C6180

    Hi!
    I'm having problem with my all in one product - HP all in one C6180. The wireless network connection drops, and the printer becomes unreachable from both web-interface and printjobs/scanningjobs etc...
    This problem has existed since I bought this machine..
    I've tried several different setups when it comes to WEP/WPA/WPA2 etc..and also different channels on the wireless, but still same problem exist. The printer works perfect for about 5 min, but then drops the connection it seems like. I'm having about 5-6 devices connected to my wireless router (Draytek VGI 2910), and all seems to work perfect together except the C6180.
    At this moment I'm running WPA2 for security on my network. I've tested the software both on Win/ Mac, and currently running the Mac-version.
    Is there any firmware-update out that could solve my problem, or how else should I manage it to work properly?
    Thanks for any help!
    /V

    There does not appear to be any firmware update on this page.  It could be a router issue.
    Let's set a static IP address for the printer:
    - Print a Network Config Page from the front of the printer. Note the printer's IP address.
    - Type that IP address into a browser to reveal the printer's internal settings.
    - Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
    - On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, set a high IP address, like .250
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Enter your router's IP (ends with .1) for the gateway and first DNS. Leave the second one blank.
    - Click 'Apply'.
    Now, shut down the router and printer, start the router, wait, then start the printer.
    After this you may need to redo 'Add a Printer' using the new IP address.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • User cannot dropped after run "Kill Session" command

    Hi ,
    I’m facing problem with oracle user,
    Oracle 10G R(2).Windows Xp
    Application in .NET
    1)I create user:
    2)Then I check current session using this select”
    "SELECT SID, SERIAL# FROM V$SESSION WHERE UserName =
    3)Then I execute this statement from application”
    ALTER SYSTEM KILL SESSION '{sid},{serialno}' IMMEDIATE”
    4)In our scenario user is no more connected.
    5) Now when we run below this statement from application oracle gives an error”CANNOT DROP THE USER THAT IS CURRENTLY CONNECTED”
    DROP USER {0} CASCADE
    Please advice.
    Faheem Latif

    Comments embedded
    Hi ,
    I’m facing problem with oracle user,
    Oracle 10G R(2).Windows Xp
    Application in .NET
    1)I create user:Please post complete command
    >
    2)Then I check current session using this select”
    "SELECT SID, SERIAL# FROM V$SESSION WHERE UserName =
    Please post the complete command.
    3)Then I execute this statement from application”
    ALTER SYSTEM KILL SESSION '{sid},{serialno}'
    IMMEDIATE”
    Please post the complete command
    4)In our scenario user is no more connected. How did you verify? Please post the complete command.
    >
    5) Now when we run below this statement from
    application oracle gives an error”CANNOT DROP THE
    USER THAT IS CURRENTLY CONNECTED” So the user is still connected.
    Which user are you trying to drop? Yourself?
    Again, please post the complete command.
    >
    DROP USER {0} CASCADE
    Please advice.
    Faheem LatifMy advice is you either provide sufficient detail, including all commands, and stop relying on crystal balls and fortunetellers.
    No one here was looking over your shoulder, so no one can tell what happened, without you providing sufficient clues. I agree with you this is cumbersome, and doesn't comply with your custom to dump everything here, not doing any research yourself.
    Sybrand Bakker
    Senior Oracle DBA

  • JDBC retrying the query after every 5 mins.

    Hi,
    I am facing one problem. I am running a hugequery from the application. If it gets timed out then weblogic tries the same query again after 5 Minutes. I haven't set any property.Is there any default propety that needs to be set.
    Please Help
    Thanks in advance
    Himanshu

    Himanshu Khanna wrote:
    I am using a servlet which calls a delegate which inturns call a session bean which calls a DAO. And there is no such transaction attribute defined.
    It does not happen everytime but sometime it happens. Not sure why is it happening is there any thing in DataSource or Connection pool that i need to set.
    HimanshuHi. This is odd. I can't imagine any part of weblogic that would
    retry a user query. What I suggest for an experiment is to turn on
    JDBC logging, and then when it seems like the query is being
    retried, reset and disable the connection pool, and then wait
    for the repeat, and show us any exception that is logged at the
    WLS server.
    Joe

  • 5.0.1 constant signal drop after every 2 minutes

    As soon as I updated the software in 4s to 5.0.1 the neverending trouble started. There are constant signal drop resulting communication lost and despite the signal bar showing full strength. can any one help, Have already triesd the SIM PIN option can any one help? would really appreciate it

    mAN?
    with that type of config. you have? you should not have any problems.
    especially with the intervideo program 'cause it captures in mpg and it is a very loose coding (better said no coding at all)
    try turning the ht off through bios
    or try this prog.
    http://www.auzol.narod.ru/download_e.html
    also did you have xp sp2 allways?
    maybe sp2 is causing problems
    also
    did you try recording on both (4) of your hdd's?

  • VPN drops after authentication

    Looking at the logs is says IKE Failed. phase 5, assert 0 then gets disconnected.  my Cisco ACS server shows that my authentication is successful and the logs show the banner being displayed.  Any ideas where to start looking for this?  I have tried looking at Google to no avail.

    More logs info.
    >
    �Sep  5 08:43:03 unknown CommCenter[15] <Notice>: Client [Preferences-CTTelephonyCenter] is telling PDP context 0 to go active.
    Sep  5 08:43:03 unknown configd[14] <Notice>: network configuration changed.
    Sep  5 08:43:03 unknown CommCenter[15] <Error>: kPdpContextStateChangeNotification kActive set last_auto_trigger_failed to false
    Sep  5 08:43:03 unknown CommCenter[15] <Error>: _ReInitThrottleTimer(): Clearing throttle timer on context ID [0] at 368545383.978369
    Sep  5 08:43:04 unknown configd[14] <Notice>: IPSec connecting to server x.x.x.x
    Sep  5 08:43:04 unknown configd[14] <Notice>: IPSec Phase1 starting.
    Sep  5 08:43:04 unknown configd[14] <Notice>: SCNC: start, triggered by Preferences, type IPSec, status 0
    Sep  5 08:43:04 unknown racoon[657] <Notice>: IPSec connecting to server x.x.x.x
    Sep  5 08:43:04 unknown racoon[657] <Notice>: IPSec Phase1 started (Initiated by me).
    Sep  5 08:43:04 unknown kernel[0] <Debug>: launchd[657] Builtin profile: racoon (sandbox)
    >
    Sep  5 08:43:05 unknown racoon[657] <Notice>: IPSec Phase1 established (Initiated by me).
    Sep  5 08:43:05 unknown racoon[657] <Notice>: IPSec Extended Authentication requested.
    Sep  5 08:43:05 unknown configd[14] <Notice>: IPSec requesting Extended Authentication.
    Sep  5 08:43:05 unknown searchd[658] <Warning>: Could not open updates file for com.apple.MobileSMS SMSSearch
    Sep  5 08:43:05 unknown searchd[658] <Warning>: Something wrong with index com.apple.MobileSMS.SMSSearch, re-creating (index=0, tid=0, savedTid=0, version=1, savedVersion=0)
    >
    �Sep  5 08:43:25 unknown configd[14] <Notice>: IPSec sending Extended Authentication.
    Sep  5 08:43:25 unknown racoon[657] <Notice>: IPSec Extended Authentication sent.
    >
    �Sep  5 08:43:28 unknown racoon[657] <Notice>: IPSec Extended Authentication Passed.
    Sep  5 08:43:28 unknown racoon[657] <Notice>: IPSec Network Configuration requested.
    Sep  5 08:43:28 unknown racoon[657] <Notice>: IPSec Network Configuration established.
    Sep  5 08:43:28 unknown configd[14] <Notice>: IPSec Network Configuration started.
    Sep  5 08:43:28 unknown configd[14] <Notice>: IPSec Network Configuration: INTERNAL-IP4-ADDRESS = x.x.x.x.
    Sep  5 08:43:28 unknown configd[14] <Notice>: IPSec Network Configuration: INTERNAL-IP4-MASK = 255.255.255.0.
    Sep  5 08:43:28 unknown configd[14] <Notice>: IPSec Network Configuration: SAVE-PASSWORD = 1.
    Sep  5 08:43:28 unknown configd[14] <Notice>: IPSec Network Configuration: INTERNAL-IP4-DNS = x.x.x.x.
    Sep  5 08:43:28 unknown configd[14] <Notice>: IPSec Network Configuration: INTERNAL-IP4-DNS = x.x.x.x.
    Sep  5 08:43:28 unknown configd[14] <Notice>: IPSec Network Configuration: BANNER = !!!!! WARNING !!!!!
         Unauthorized access and use of this system is
         not permitted and strictly prohibited by
         security policies, regulations, state and federal
         law.
         UNAUTHORIZED USERS ARE SUBJECT TO CRIMINAL AND
         CIVIL PENALTIES AS WELL AS COMPANY INITIATED
         DISCIPLINARY PROCEEDINGS..
    Sep  5 08:43:28 unknown configd[14] <Notice>: IPSec Network Configuration: DEF-DOMAIN = domain.com.
    Sep  5 08:43:28 unknown configd[14] <Notice>: IPSec Network Configuration: DEFAULT-ROUTE = local-address x.x.x.x/32.
    Sep  5 08:43:28 unknown configd[14] <Notice>: IPSec Phase2 starting.
    ��Sep  5 08:43:28 unknown configd[14] <Notice>: IPSec Network Configuration established.
    ��Sep  5 08:43:28 unknown configd[14] <Notice>: IPSec Phase1 established.
    Sep  5 08:43:28 unknown configd[14] <Notice>: event_callback: Address added. previous interface setting (name: en0, address: x.x.x.x), current interface setting (name: utun0, family: 1000, address: x.x.x.x, subnet: 255.255.255.0, destination:x.x.x.x).
    Sep  5 08:43:28 unknown racoon[657] <Notice>: IPSec Phase2 started (Initiated by me).
    Sep  5 08:43:28 unknown apsd[68] <Warning>: <APSCourier: 0x130da0>: Stream error occurred for <APSTCPStream: 0xe62d100>: Error Domain=NSPOSIXErrorDomain Code=57 "The operation couldn’-t -b-e -c-o-m-p-l-e-t-e-d-. -S-o-c-k-e-t -i-s -n-o-t -c-o-n-n-e-c-t-e-d-" -U-s-e-r-I-n-f-o-=-0-x-e-6-2-c-7-3-0 -{-}
    Sep  5 08:43:28 unknown configd[14] <Notice>: network configuration changed.
    Sep  5 08:43:28 unknown configd[14] <Error>: IPSec Controller: IKE FAILED. phase 5, assert 0
    Sep  5 08:43:28 unknown configd[14] <Notice>: IPSec disconnecting from server x.x.x.x
    Sep  5 08:43:28 unknown racoon[657] <Notice>: IPSec disconnecting from server x.x.x.x
    Sep  5 08:43:28 unknown mDNSResponder[45] <Error>: UpdateInterfaceList: if_nametoindex returned zero/negative value for utun0(0)
    Sep  5 08:43:28 unknown configd[14] <Error>: SCNC Controller: service_ending_verify_primaryservice, waiting for PrimaryService. status = 1.
    Sep  5 08:43:28 unknown mDNSResponder[45] <Error>: ConfigResolvers: interface specific index 8 not found
    Sep  5 08:43:28 unknown mDNSResponder[45] <Error>: ConfigResolvers: interface specific index 8 not found
    Sep  5 08:43:28 unknown mDNSResponder[45] <Error>: ConfigResolvers: interface specific index 8 not found
    Sep  5 08:43:28 unknown mDNSResponder[45] <Error>: ConfigResolvers: interface specific index 8 not found
    ��Sep  5 08:43:28 unknown configd[14] <Notice>: network configuration changed.
    Sep  5 08:43:28 unknown configd[14] <Error>: SCNC Controller: ipv4_state_changed, done waiting for ServiceID.

  • Only my MBP Drops L2TP VPN Connection after 60 Seconds

    My Old G4 Laptop and my Dual G5 Tower both connect to my office via L2TP VPN without an issue. with the exact same settings exported over to my mac book pro, the connection drops after exactly 60 seconds. I've tried both wireless and wired connections, and in either case, the VPN drops after 60 seconds of connect time.

    I checked with my VPN administrator. He upgraded the XServe to Mac OS 10.4.5, and we tried again, with the same results. He sent me the server log to post:
    2006-03-14 14:39:20 PST Listening for connections...
    2006-03-14 14:43:44 PST terminating on signal 15
    2006-03-14 14:43:44 PST terminating on signal 15
    #End-Date: 2006-03-14 14:43:44 PST
    #End-Date: 2006-03-14 14:43:44 PST
    #Start-Date: 2006-03-14 14:44:55 PST
    #Fields: date time s-comment
    #Start-Date: 2006-03-14 14:44:55 PST
    #Fields: date time s-comment
    2006-03-14 14:44:55 PST Loading plugin /System/Library/Extensions/L2TP.ppp
    2006-03-14 14:44:55 PST Loading plugin /System/Library/Extensions/PPTP.ppp
    2006-03-14 14:44:58 PST Listening for connections...
    2006-03-14 14:44:58 PST Listening for connections...
    2006-03-14 17:06:52 PST Incoming call... Address given to client = 172.16.6.2
    Tue Mar 14 17:06:52 2006 : Directory Services Authentication plugin initialized
    Tue Mar 14 17:06:52 2006 : Directory Services Authorization plugin initialized
    Tue Mar 14 17:06:52 2006 : PPTP incoming call in progress from 'REDACTED'...
    Tue Mar 14 17:06:52 2006 : PPTP connection established.
    Tue Mar 14 17:06:52 2006 : using link 0
    Tue Mar 14 17:06:52 2006 : Using interface ppp0
    Tue Mar 14 17:06:52 2006 : Connect: ppp0 <--> socket[34:17]
    Tue Mar 14 17:06:52 2006 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0xe2f50f1d> <pcomp> <accomp>]
    Tue Mar 14 17:06:52 2006 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x122fcd45> <pcomp> <accomp>]
    Tue Mar 14 17:06:52 2006 : lcp_reqci: returning CONFACK.
    Tue Mar 14 17:06:52 2006 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x122fcd45> <pcomp> <accomp>]
    Tue Mar 14 17:06:55 2006 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0xe2f50f1d> <pcomp> <accomp>]
    Tue Mar 14 17:06:55 2006 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0xe2f50f1d> <pcomp> <accomp>]
    Tue Mar 14 17:06:55 2006 : sent [LCP EchoReq id=0x0 magic=0xe2f50f1d]
    Tue Mar 14 17:06:55 2006 : sent [CHAP Challenge id=0xbf <cc4af73a9d88941b39418f9c31043e6c>, name = "osxvpn.local"]
    Tue Mar 14 17:06:55 2006 : rcvd [LCP EchoReq id=0x0 magic=0x122fcd45]
    Tue Mar 14 17:06:55 2006 : sent [LCP EchoRep id=0x0 magic=0xe2f50f1d]
    Tue Mar 14 17:06:55 2006 : rcvd [LCP EchoRep id=0x0 magic=0x122fcd45]
    Tue Mar 14 17:06:55 2006 : rcvd [CHAP Response id=0xbf <REDACTED>, name = "dpisoni"]
    Tue Mar 14 17:06:55 2006 : sent [CHAP Success id=0xbf "S=REDACTED M=Access granted"]
    Tue Mar 14 17:06:55 2006 : DSAccessControl plugin: User 'dpisoni' authorized for access
    Tue Mar 14 17:06:55 2006 : sent [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
    Tue Mar 14 17:06:55 2006 : rcvd [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
    Tue Mar 14 17:06:55 2006 : sent [CCP ConfAck id=0x1 <mppe +H -M +S -L -D -C>]
    Tue Mar 14 17:06:55 2006 : rcvd [CCP ConfAck id=0x1 <mppe +H -M +S -L -D -C>]
    Tue Mar 14 17:06:55 2006 : MPPE 128-bit stateless compression enabled
    Tue Mar 14 17:06:55 2006 : sent [IPCP ConfReq id=0x1 <addr 172.16.100.51>]
    Tue Mar 14 17:06:55 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:06:55 2006 : rcvd [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
    Tue Mar 14 17:06:55 2006 : ipcp: returning Configure-NAK
    Tue Mar 14 17:06:55 2006 : sent [IPCP ConfNak id=0x1 <addr 172.16.6.2> <ms-dns1 172.16.5.100> <ms-dns3 172.16.5.100>]
    Tue Mar 14 17:06:55 2006 : rcvd [IPV6CP ConfReq id=0x1 <addr fe80::0216:cbff:fe89:f062>]
    Tue Mar 14 17:06:55 2006 : Unsupported protocol 0x8057 received
    Tue Mar 14 17:06:55 2006 : sent [LCP ProtRej id=0x2 80 57 01 01 00 0e 01 0a 02 16 cb ff fe 89 f0 62]
    Tue Mar 14 17:06:55 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:06:55 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:06:55 2006 : rcvd [IPCP ConfAck id=0x1 <addr 172.16.100.51>]
    Tue Mar 14 17:06:55 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:06:55 2006 : rcvd [IPCP ConfReq id=0x2 <addr 172.16.6.2> <ms-dns1 172.16.5.100> <ms-dns3 172.16.5.100>]
    Tue Mar 14 17:06:55 2006 : ipcp: returning Configure-ACK
    Tue Mar 14 17:06:55 2006 : sent [IPCP ConfAck id=0x2 <addr 172.16.6.2> <ms-dns1 172.16.5.100> <ms-dns3 172.16.5.100>]
    Tue Mar 14 17:06:55 2006 : ipcp: up
    Tue Mar 14 17:06:55 2006 : found interface en0 for proxy arp
    Tue Mar 14 17:06:55 2006 : local IP address 172.16.100.51
    Tue Mar 14 17:06:55 2006 : remote IP address 172.16.6.2
    Tue Mar 14 17:06:58 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:06:58 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:06:58 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:06:58 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:01 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:01 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:01 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:01 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:04 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:04 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:04 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:04 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:07 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:07 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:07 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:07 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:10 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:10 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:10 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:10 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:13 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:13 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:13 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:13 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:16 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:16 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:16 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:16 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:19 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:19 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:19 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:19 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:22 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:22 2006 : rcvd [ACSCP] 01 01 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:22 2006 : sent [ACSCP] 04 01 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:22 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:25 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:25 2006 : rcvd [ACSCP] 01 02 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:25 2006 : sent [ACSCP] 04 02 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:25 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:28 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:28 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:31 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:31 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:31 2006 : rcvd [ACSCP] 01 02 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:31 2006 : sent [ACSCP] 04 02 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:34 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:34 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:34 2006 : rcvd [ACSCP] 01 02 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:34 2006 : sent [ACSCP] 04 02 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:37 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:37 2006 : rcvd [ACSCP] 01 02 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:37 2006 : sent [ACSCP] 04 02 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:37 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:40 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:40 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:40 2006 : rcvd [ACSCP] 01 02 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:40 2006 : sent [ACSCP] 04 02 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:43 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:43 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:43 2006 : rcvd [ACSCP] 01 02 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:43 2006 : sent [ACSCP] 04 02 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:46 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:46 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:46 2006 : rcvd [ACSCP] 01 02 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:46 2006 : sent [ACSCP] 04 02 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:49 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:49 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:49 2006 : rcvd [ACSCP] 01 02 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:49 2006 : sent [ACSCP] 04 02 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:52 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:52 2006 : rcvd [ACSCP] 01 02 00 10 01 06 00 00 00 01 02 06 00 00 00 01
    Tue Mar 14 17:07:52 2006 : sent [ACSCP] 04 02 00 0a 01 06 00 00 00 01
    Tue Mar 14 17:07:52 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:55 2006 : sent [ACSCP] 01 01 00 04
    Tue Mar 14 17:07:55 2006 : rcvd [ACSCP] 02 01 00 04
    Tue Mar 14 17:07:55 2006 : rcvd [LCP TermReq id=0x2 "MPPE disabled"]
    Tue Mar 14 17:07:55 2006 : LCP terminated by peer (MPPE disabled)
    Tue Mar 14 17:07:55 2006 : ipcp: down
    Tue Mar 14 17:07:55 2006 : sent [LCP TermAck id=0x2]
    Tue Mar 14 17:07:55 2006 : rcvd [LCP TermReq id=0x3 "MPPE disabled"]
    Tue Mar 14 17:07:55 2006 : sent [LCP TermAck id=0x3]
    Tue Mar 14 17:07:55 2006 : Connection terminated.
    Tue Mar 14 17:07:55 2006 : Connect time 1.1 minutes.
    Tue Mar 14 17:07:55 2006 : Sent 0 bytes, received 8176 bytes.
    Tue Mar 14 17:07:55 2006 : PPTP disconnecting...
    Tue Mar 14 17:07:55 2006 : PPTP disconnected
    2006-03-14 17:07:55 PST --> Client with address = 172.16.6.2 has hungup

  • Inspection lot generation after every 5th goods receipt

    Dear Gurus,
    There is a scenario in my project. There are some materials for which the inspection is done on every 5th goods receipt. The inspection of the material will be done for the first time it is coming in the company's premise and for the next four time it will be forwarded directly to the production without any quality inspection. Is it possible in sap to create inspection lot after every 5th inward delivery? Or can anyone suggest me a way to capture this scenario in sap..
    Regards,
    Abhishek

    Hi
    This is possible by using DMR in Task list.
    Go to tcode QDR1-->Create a DMR with
    follwoing steps;
    Dyanmic modification : on Lot level
    F5
    Stage 10 Inspection seviarity :4 Skip :balnk ist: tick  Text:first stage
    OK
    No of Inspectin:1
    Max. skip duration:Blank
    New insp. stage:20
    NOT OK
    Rejections           1
    New insp. stage:10
    Stage 20 Inspection seviarity :blank  Skip :tick  ist:blank  Text:second  stage
    No of Inspectin:5
    Max. skip duration:Blank
    New insp. stage:10
    NOT OK
    Rejections           1
    New insp. stage:10
    SAVE
    Now use this DMR in task list header at Lot level.
    Attach this task list to inspection lot
    make sure that you have ticeked on Skip & Auto UD in QM view.
    Then in QA16 schecule for Auto UD after every 10 mins or 30 mins.
    at plant level also make auto UD & skip 30 mins.
    This will skip the 4 lots & UD will be taken in background.
    After that it will come to QI
    Revert back for More querries.
    Regards
    Sujit

  • How to get the count for every 30 mins

    Hi,
    Following is the table format:
    Time ******************** logged in users
    9/5/2006 8:38:22 PM**** 2
    9/5/2006 8:38:44 PM**** 4
    9/5/2006 8:40:22 PM**** 1
    9/5/2006 8:41:22 PM**** 3
    9/5/2006 8:52:22 PM**** 6
    9/5/2006 9:02:22 PM**** 5
    9/5/2006 9:04:24 PM**** 3
    9/5/2006 9:08:26 PM**** 4
    9/5/2006 9:10:28 PM**** 6
    What I need is number of users logged in for every 30 min
    like 9/5/2006 9:00:00(8:30 to 9:00) is 16
    9/5/2006 9:30:00(9:00 to 9:30) is 18
    Can any one help me in this regard?
    -Raj

    The trick is to group your times to every 30 min.
    Unfortunatly there is no way to TRUNC(30 min).
    But you can build this function yourself using some mathematical logic and trunc to build the groups.
    Look at this code piece:
    select trunc(sysdate) + trunc((sysdate - trunc(sysdate))*24*2)/24/2
    from dualInstead of sysdate use your date column and group by the expression.
    Added example using Dave's test data
    WITH t AS
            SELECT TO_DATE ('9/5/2006 8:38:22 PM', 'fmdd/mm/yyyy hh:mi:ss pm') tm,
                   2 num
              FROM DUAL
            UNION
            SELECT TO_DATE ('9/5/2006 8:38:44 PM', 'fmdd/mm/yyyy hh:mi:ss pm') tm,
                   4 num
              FROM DUAL
            UNION
            SELECT TO_DATE ('9/5/2006 8:40:22 PM', 'fmdd/mm/yyyy hh:mi:ss pm') tm,
                   1 num
              FROM DUAL
            UNION
            SELECT TO_DATE ('9/5/2006 8:41:22 PM', 'fmdd/mm/yyyy hh:mi:ss pm') tm,
                   3 num
              FROM DUAL
            UNION
            SELECT TO_DATE ('9/5/2006 8:52:22 PM', 'fmdd/mm/yyyy hh:mi:ss pm') tm,
                   6 num
              FROM DUAL
            UNION
            SELECT TO_DATE ('9/5/2006 9:02:22 PM', 'fmdd/mm/yyyy hh:mi:ss pm') tm,
                   5 num
              FROM DUAL
            UNION
            SELECT TO_DATE ('9/5/2006 9:04:24 PM', 'fmdd/mm/yyyy hh:mi:ss pm') tm,
                   3 num
              FROM DUAL
            UNION
            SELECT TO_DATE ('9/5/2006 9:08:26 PM', 'fmdd/mm/yyyy hh:mi:ss pm') tm,
                   4 num
              FROM DUAL
            UNION
            SELECT TO_DATE ('9/5/2006 9:10:28 PM', 'fmdd/mm/yyyy hh:mi:ss pm') tm,
                   6 num
              FROM DUAL)
    SELECT   SUM (num), trunc(tm) + trunc((tm - trunc(tm))*24*2)/24/2 halfhours
        FROM t
    GROUP BY trunc(tm) + trunc((tm - trunc(tm))*24*2)/24/2;
    Row#     SUM(NUM)     HALFHOURS
    1     16     09.05.2006 20:30:00
    2     18     09.05.2006 21:00:00Message was edited by:
    Sven Weller

  • My iphone 4 is now dropping every phone call after 1-2 min. I just updated its software, and it still drops.  Any thoughts?

    My Iphone 4 is now dropping EVERY phone call after 1-2 min.  I just updated it, and it still drops.  Any suggestions?

    Hm.... Jailbroken? No warranty. No support. Stay away from it in the future.

Maybe you are looking for

  • Can I use a schema with no targetnamespace with the file adapter?

    I am loading a file using a file adapter configured to use an xsd from a third party, the third party controls the xsd and incoming xml and does not have a targetnamespace defined in the xsd or xml. When I define a file adapter for it the wizard indi

  • Multiple Logins - Same Browser Cookie Problems??

    Is there any Issues in which a User uses Tabs to Login (LDAP Authentication)? I have only a Cookie Name in the Cookie Attributes in Authentication Setup. I had multiple browsers opened and signed on an application. A :tx- row lock contention was evid

  • Intermittent of error "ORA-12203: TNS:unable to connect to destination"

    Hi, One of my application (run 24 hours each day) face intermittent of error "ORA-12203: TNS:unable to connect to destination", any one face the same issue ? any solution for this ? The error may occur weekly, some time monthly, occur randomly. My Or

  • Explain me a VI please !!! please... low notes.....

    Hello ! fisrt of all , excuse my bad english (i'm french) i really need help to explain (interpret) this project: http://lionbob.free.fr/labview/ u can see the 2 screen shots i took : http://lionbob.free.fr/labview/Labview1.jpg http://lionbob.free.fr

  • All data goes to sapdata1 during installation

    I was about to install IDES ECC6.0 in default, but it turned out to be an error saying like out of space in sapdata1 directory. Even if we allocate the data into several directories, all the data goes to sapdata1 direcotry.  does anyone know the work