Users who have updated to v. 10.6.1.7 cannot download my podcast.
There is no '!' displayed, it seems to start, but after a literal second, stops. I put of updating and had no issue, but when I updated to see if that was the problem, I started experienceing the same thing. What is the difference? Same code, same xml file, nothing changed but the users version of iTunes.
I attempted to upgrade to V 11.0.1
which ended with an error message and a code 2330.
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?
Similar Messages
-
Ever since I have updated my software to iOS 7, I cannot download anything from the AppStore app and I have tried resetting my password and updating ITunes, but nothing works! Also when I try to sink my mini with my iTunes account it says you cannot sync because the sync session failed to start.
It sounds like to me you're trying to sync using the computer.
Try these things and see if it helps before you try your next syncing session. If none of the things below work then you might consider trying to sync using iCloud only.
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/ -
I have several users who have updated to the new iOS 5 and now are unable to get to the apple store
I have several users with ipads who have updated to the new iOS5 and are now unable to access the itunes store. It loads about half way and then nothing. Any ideas on how to fix this?
Photo stream only keeps your photos for 30 days. After that, they are removed from your photo stream but not from any device that has already received them. Chances are, the 44 photos are from the last 30 days; the others are not there because they are no longer in your photo stream.
If the photos were in your camera roll when you last backed up, restoring to the backup should recover them. However, you will have to restore to the entire backup to do so. If they weren't backed up or imported to your computer, there is no way to recover them now.
To be sure your photos are saved, regularly import them from the camera roll to your computer as outlined here: http://support.apple.com/kb/HT4083. -
How come when you had updated & installed ios6 to your ipad the apps store & itunes is not available in the Philippines.......please consider Filipino ipad & iphone users who have been downloading latest apps from store everyday...need your PROMPT ACTION
Thank you for your responses.. To Sjazbec, At least you guys in Germany and the Netherlands have some kind of posters from Apple to let you know that the feature is not available.
There is no such warning on the Irish Apple site.!
My point was that, I would not have even considered trying to reorganize my itunes library had I known that the feature is not available in Ireland.
And that falls into the domain of Apple Ireland advertising.. which I"m sorry to say is false and misleading.
There are no "posters" telling the Irish customer that icloud / itunes music is not available!
I"m not blaming Apple for not "having the feature" in Ireland.. I am upset at them for falsing advertising a feature that they cannot for whatever reason deliver to Irish customers..
To Keats 2010 LOL... Trust me there were lots of clouds in Ireland today!.. It's a long time since we've seen the sun!.. As for getting your head around the basics.. I could talk you through everything that doesn't work in Ireland if it's any help lol -
Need a way to find out users who have not all logged in into the portal
Hi all,
Please can some body tell me the way to find out all the users who have not at all logged in into the SAP enterprise portal after their user ID's are created.
Are there any methods(UME APIs) or attributes that set the status of user whether he/she has logged in into the portal first time.
Thanks & Regards,
Hajira RehmanThere used to be a way, but here's what Detlev posted earlier this year:
<b>Hi everyone,
UPDATE on this: From SP16 on, the last successful login date does not get logged into the database anymore, see <a href="http://help.sap.com/saphelp_nw04/helpdata/en/43/bc6b9202454dece10000000a422035/frameset.htm">here</a> - for performance reasons, as it is stated...
Hope it helps not to fall into this new trap
Detlev</b>
So, there are no simple APIs - you'll need to build your own mechanism. -
How to find out users who have answered security questions
Is there any report where we can find out users who have answered security questions.
Please reply back to this.This might help you:
Define a task template, reference the UserQuestionReport task definition:
<TaskDefinitionRef>
<ObjectRef type='TaskDefinition' id='#ID#TaskDefinition:UserQuestionReport' name='User Question Report' displayName='UI_REPTS_XML_USER_QUESTION_TITLE'/>
</TaskDefinitionRef>Define desired variables
<Attribute name='attrListField'>
<List>
<String>accountId</String>
<String>policy</String>
<String>loginInterface</String>
<String>questions</String>
</List>
</Attribute>
<Attribute name='attrMapField'>
<Map>
<MapEntry key='accountId' value='UI_REPTS_XML_REPORT_ATTR_ACCOUNTID'/>
<MapEntry key='loginInterface' value='UI_ATTR_LOGIN_INTERFACE'/>
<MapEntry key='policy' value='UI_SERVICEMODIFY_JSP_ACCOUNTPOLICY'/>
<MapEntry key='questions' value='UI_ATTR_MIN_QUESTION_UNANSWERED'/>
</Map>
</Attribute>and the rest of the task template for a report definition.
Hth
Edited by: nickoarg on Feb 5, 2009 1:57 PM -
List of users who have authorization for a particular transaction?
Hi All,
Can anyone guide me how to know the list of users who have authorization for a particular transaction?
I need this to find out the list of authorizations that are obsolete ,when the particular trnsaction is obsolete in an Upgrade process.
Thanks in advance.we can get the list of users for a particular transaction as below.
get the tcode and place in AGR_TCODES and we get the list of roles .
loop the roles and pass each role to AGR_USERS and we get list of users for that role.
finally we got the list of users for that tcode. -
List of users who have access to a specific universe
Hello Experts,
We have a requirement to get the list of the users who have access to a specific universe. Please suggest how to achieve this ?
Is there any query to find this list by query builder or query to audit database ?
We are using Business objects 3.1 sp5.
Many Thanks
AnkurAnkur,
Refer to the discussion below:
how to get a list of reports a user has access to, using either the cms database or the auditing database
Regards,
Ashvin -
How can I list all users who have access to a particular TABLE or VIEW
Hi,
Can someone tell me how I can list all users who have access to a particular TABLE or VIEW.
AbhishekHi,
Take a look on this link: http://www.petefinnigan.com/tools.htm
Cheers -
Query to find out the list of user who have delete access
Hi,
I need a query to find out the list of users who have delete access on perticular folder/universe/ reports in infoview.
Please advice.
Regards,
Neo.orton607 wrote:
thanks for replying guys. But the thing is i am using dynamic sql execute immediate in my package, so i want those tables also and the schema name.
thanks,
ortonThis is not possible. The best you could do is to have a good guess.
Or how would you parse some dynamic statement as this:
v_suffix := 'loyees';
v_sql := 'Select count(*) from (select ''nonsense'' col1 from emp'||v_suffix||') where col1 = ''Y'''';
execute_immediate(v_sql);
...What is the table name? How do you want to parse that?
Better rewrite all dynamic SQL statements into non dynamic ones. Or do the source control logic for those dynamic parts in an extra module. For example implement your own dependency table and force every developer to add there all dynamic parts. -
Can I get a list of users who have a specific authorization role?
Hello,
I'm wondering if there is a BAPI or FM that takes as input a single authorization role and gives me back a list of all users who have that role?
Thx.
Andy Jacobshi,
please check the below FM
'PRGN_1001_READ_USER_ASSIGNMENT'
jaffer ,
Please reward the helpful answers. -
Portal users who have logged in during a specified time interval ?
Hi,
I need to know all the users who have logged in to the portal during a specific interval of time e.g during the last 10 days. Is there any provision to write code using UME api ?
Any help would be highly appreciated and rewarded.
Thanks & Regards,
SudhirHi Jaga, Thanks for your reply.
This is what i needed.
Vector v=new Vector();
IUserAccountFactory uaf = UMFactory.getUserAccountFactory();
IUserAccountSearchFilter userAccountSearchFilter=uaf.getUserAccountSearchFilter();
userAccountSearchFilter.setLoggedInBetween(fromDate,toDate);
ISearchResult sr = uaf.search(userAccountSearchFilter);
while(sr.hasNext())
IUserAccount ua = uaf.getUserAccount((String)sr.next());
IUser tmp = ua.getAssignedUser();
v.add(tmp); -
Hi
After I ran SharePoint configuration wizard successfully to upgrade to SharePoint 2013 / SP1.
I can open Central Administration site just fine.
but now when I open any Site collection, I got this error.
Server Error in '/' Application
This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database. To connect this server to the server farm, use the SharePoint Products Configuration
Wizard, located on the Start menu in Microsoft SharePoint 2010 Products
I have restarted all the servers: SQL server, WFE and APP servers but still cann't get this resolve.
Services on all servers are running, IIS - application pools are running.
Can someone help with where that could be a problem or if there is a solution.
Thanks in advance for your comments or advices.
SwanlPlease verify the followings:
Make sure that from the SharePoint front end and application servers that you can ping your SQL server.
Make sure that your Farm account has permission to the configuration database.
Lastly verify that your database didn't for some reasons go into recovery mode.
once everything is fine and you are still having issues, restart the SQL host service on the SQL server.
Once the service is restarted you will need to reboot Central Admin and then your front end servers.
In addition, as you built your farm inside the firewall, please disable the firwall, or create rules for SQL Server service in the firwall on SQL server.
More information about creating rules in firewall, please refer to the following posts: http://social.technet.microsoft.com/Forums/en-US/c5d4d0d0-9a3b-4431-8150-17ccfbc6fb82/can-not-create-data-source-to-an-sql-server http://www.mssqltips.com/sqlservertip/1929/configure-windows-firewall-to-work-with-sql-server/
Here is a similar post for you to take a look at: http://social.technet.microsoft.com/Forums/en-US/ea54e26c-1728-48d4-b2c5-2a3376a1082c/this-operation-can-be-performed-only-on-a-computer-that-is-joined-to-a-server-farm-by-users-who-have?forum=sharepointgeneral
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply. -
CSV file for users who have one-time password email address
Hi Guys,
I am trying to extract the list of users who have one-time password email address in FIM or users who have registered with one-time password reset authentication workflow. I need to get their email addresses in CSV file.
Regards
Sarwar
SarwarTake a look at:
http://social.technet.microsoft.com/wiki/contents/articles/3616.how-to-use-powershell-to-export-all-users-who-have-registered-for-self-service-password-reset-sspr.aspx
The script queries a WorkFlow called "Password Reset AuthN Workflow" and returns its ObjectID, then uses it to do a new query searching for "Users" with these parameters:
AuthN WorkFlow Registered = ObjectID of "Password Reset AuthN Workflow"
The script exports these details to a CSV.
Also, all OTP email addresses should be stored in the "msidmOneTimePasswordEmailAddress" attribute in the FIM Portal. -
I'm having trouble with my iPhone 5 iMessage service. The device does not recognize the users who have iMessage when I try to contact them using this feature. Who have the same issue and what did you do in order to solve it?
Read here:
http://support.apple.com/kb/ts2755
Maybe you are looking for
-
Using Spotlight on iPhone to find my pics
How do I get Spotlight to index my pics? Andy
-
PowerBook G4 With New Hard Drive - Can't boot from 10.2 OS Install Disk
My sister's hard drive died so I bought and installed a new Seagate 160GB drive. She has OS 10.2 OS disks but is not sure if they were for this computer. The fact that the computer is copyright 2004, and the disks 2002 makes me wonder. When I try to
-
How to convert date from "yyyymmdd" to "MM/DD/YYYY" format
1. I have one BLDAT field in my internal table. its getting updated from input file. 2. The value in the input file is like yyyymmdd. So the internal table field is filled like this "YYYYMMDD". 3. After this,I have to compare this internal t
-
How can I file share with another personif both of us are using Mac operating systems (one of us using a Mac laptop and the other using iMac). Our intention is to have a working document that can be changed by both parties over time and both parties
-
How to mounted oracle database automatically in oracle version 8.1.7?
i want to know,how to mounted oracle database automatically in oracle version 8.1.7?