Users with a https home page are not redirected when using web-passthrough on WLC 5508
I have a Cisco 5508 running version 7.0.116.0. This controller hosts an open public wifi that requires users to accept a terms agreement via a Web-Passthrough setup that redirects them to the terms splash page. For most people this works without any issue. However, if a user has their homepage for their default browser set to a https site, such as https://www.google.com, then they are never redirected to the terms splash page. The page will just spin and spin until finally they get a timeout error.
Has anyone else had this experience? If so did you find a solution or is this some sort of short coming of the controller?
Any and all comments/information is appreciated!
Thanks,
Jim
This is a known issue (see bug ID CSCar04580).
CSCar04580 Bug Details
web auth (redirect) doesn't work when client users a https url
Symptom:A client whose home page is an HTTPS (HTTP over SSL, port 443) one will never
be redirected by Web Auth to the web authentication dialog. Therefore, such
a client will not know to authenticate, and will fail to connect to the
network.
Workaround:The client should attempt to open any HTTP (port 80) web page.
Similar Messages
-
How can i set songs within a playlist, or an entire playlist, so that they are not included when using the shuffle function on IPOD Classic?
Is this possible?You can set any song to Skip when shuffling.
In your iTunes Library, highlight the song and right-click/Get Info. On the Options tab is the Skip when shuffling box. Select that and then Sync the iPod with your Library. -
My home page opens with features in a column on the left and bookmarks are available but the center section (features) is blank. Home page with features appeared at first opening of FF, then would not open normally after opening a feature but would not open normally when going back to home page. No not at all.
This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox -
My home pages are not loading - facebook, ebay, BBC
On Firefox and Internet Explorer I cannot load any of my home pages - Ebay, Facebook and BBC news. I just get text only as a list down the left hand side of the screen. Have tried starting a new profile, have run a malware scan, scanned with anti virus, removed the pages as default homepages.
Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*http://support.mozilla.com/kb/Cookies
*http://support.mozilla.com/kb/Deleting+cookies
*http://support.mozilla.com/kb/How+to+clear+the+cache -
Enterprise DNS servers are not responding when using Windows NLB with Direct Access 2012
Hi
We have installed Direct Access 2012 as one server installation:
- Two network cards. First one in DMZ and second one in internal network
- Two consecutive IP addresses configured in DMZ because of Teredo
- PKI because of Win7 Clients IPSec
- Our corporate network is native IPv4 so we use DNS64/NAT64 and DA-server is configured as DNS
- DA-servers are VMWare virtual machines
One server installation works fine and now we want to use Windows NLB as load balancing. NLB installation goes fine too,
but problem is DNS. If we still try to use DA-server as DNS there comes error message below
None of the enterprise DNS servers 2002:xxxx:xxxx:3333::1 used by DirectAccess clients for name resolution are responding. This might affect DirectAccess client connectivity to corporate resources.
When trying to configure DNS using Infrastructure access setup, DNS cannot be validated when using DA-servers DIP or cluster VIP. Only domain local DNS looks to be ok but those have no IPv6 addressess. So how DNS should be configured when using multicast
NLB?
Tried to remove name suffix then adding again => Detect DNS server => DA-server IPv6 address found => validate => The specified DNS server is not responding...
Then tried to ping detected address => General failure
NLB clusters are configured as multicast and static ARPs are configured too. Both clusters can be connected from those subnets as they should be.
Any clues how to fix this?
~ Jukka ~Hi,
Your question falls into the paid support category which requires a more in-depth level of support. Please visit the below link to see the various
paid support options that are available to better meet your needs.
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
Regards,
Mike
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Items in shared mailbox are not visible when using cached mode in Outlook 2013
Hi all,
When using Outlook 2013 working with the users own mailbox works great, but when a user connects an additional mailbox to its mailbox, this mailbox is shown correctly, but it contains no items. The folder list is shown correctly, but there are no items to be
seen.
These users (I have seen it with 3 different users and 2 shared mailboxes already) have full access to these mailboxes (Exchange 2010), but somehow the items aren't shown... When these users turn off cached mode, it works fine and when they use Outlook 2010
it also works fine, but using Outlook 2013 with cached mode will only show their own items and not the items in an additional shared mailbox.
What is the cause of all this?
Kind regards,
ErikMaybe something interesting...
When looking at article http://support.microsoft.com/kb/982697/en-us
I saw that Outlook 2013 by default caches everything and that's what I wanted. I tested however adding this regkey to see what happened and after that the email shows up in the mailboxes... Somehow the mail from shared mailboxes doesn't want to be
cached...
Does anyone know what this could be? I want everything to be cached, also the shared mailboxes but somehow this doesn't work and it does when using Outlook 2010.... -
Help topics are not displaying when using Windows 7 / IE 9 / RH10
We recently upgraded our library from RH8 to RH10. Also used a trial version of RH9 in this process. Now when we compile several of the projects have issues where help topics do not display when selected in the TOC or when a link to the topic is clicked within another internal topic. It is in a continous loop in the browser (like it is trying to load). If you right-click on the topic it displays (we are currently using this as the work-around). Anyone else having this problem?? I saw something similiar for Windows8/IE10, but the fix does not apply here (http://forums.adobe.com/message/5138909#5138909#5138909).
Hi,
I (April) apologize I have been OOO and have not been able to respond to your replies.
Let’s start over.
We have an issue where help topics do not display when selected in the TOC or when a link to the topic is clicked within another internal topic. It is in a continous loop in the browser (flickering like it is trying to load). If you right-click on the topic it displays (we are currently using this as the work-around).
We use Windows 7, IE9 and RH10 for all our projects. (Recently upgraded from RH8 to RH10)
Turns out the problem is not isolated. I have run across it in at least one other project, which leads me to think it also occurs in others.
"Does this only occur when the help is called from your software? Is it OK if you double click the start page?"
No. I it ALSO occurs when launched from the start page.
Have you tried deleting the CPD file and reopening Rh and the project?
Yes, without success.
Are you using any redirects?
Per (Adrienne), “I am not using any redirects. I encounter this issue only in IE. If I paste the .htm into a Firefox browser, the help displays as it should.”
I will add that the project also displays incorrectly in Google Chrome.
Thanks April -
Retro entires in HR Forms are not printed when using device type ZHPP3005
Hi All,
We are doing a HCM implementation. We are using HP P3005n printer and ZHPP3005 device type to print our HR forms. We are using ZCalibri font.These are smartforms. Everything was printing perfectly.
Then there were retro calculations made to these forms.Strangely, the forms doesn't display these retro entries in the print preview using ZHPP3005 device type. Only the retro entries throughout the form are not printing. All other entries get printed.
When we use device type HPLJIIID, we get these retro entries printed in our form however the format of the form gets changed.
Now, we want to use device type ZHPP3005 and get these retro entries printed. How would we achieve this? Is this a device type issue? Or, anything needs to be done in the smartform? Why is this issue?
Please help. Quick response will be appreciated. We are nearing our Go Live date and needs this resolved immediately.
Thanks in Advance.Hi,
Check the assigned page format to your custom device type. Try to assign all the page format which are available for
HP*** which you gives you desired result.
Regards,
Vamshi. -
Detecting when files are not HTML when using a httpURLConnection/HTMLEditor
I have created a Spider application that can extract info from a web page using a combination of a httpURLConnection and HTMLEditorKit.ParserCallback
However every so often links to not html pages are found
ie. pdfs,zip files, excel spreadsheets etc...
Would anybody know how I can check the type of a downloaded page without rooting through the headers (I am not sure what is going on in there) ofrchecking the extention of the file, this would end up being a massive list of banned url extentions and would never be fully complete.
Thanks.You should actually look at the headers first, IMO. Not knowing "what is going on in there" is a very bad reason to discard that solution. The Content-Type header is meant to indicate exactly the type of content you are getting (your want the text/html mime-type).
Not all servers report the correct content type all the time in this header so it won't be a 100% solution.
BTW, the Aperture project is specifically intented to extract content and metadata from various sources, including websites. You might be able to use that. -
Page tiles not showing when using Adobe Muse and Web marketing hosting
Hello
I have created a muse site that has the correct page titles showing in the browser when using the web basics hosting. But I need the same site to now contain a blog so have changed the hosting to web marketing, this has resulted in the pages not showing their page titles in the browser
Does anybody know why this is or what I can do about it?
thanks for any info
regards
MartinPage title should not change with site plan change unless it is done manually , or if modified file is uploaded from Muse.
Please check the titles added on page if they exist or not, if still same issue , provide the site url.
Thanks,
Sanjit -
Cursors are not closed when using Ref Cursor Query in a report ORA-01000
Dear Experts
Oracel database 11g,
developer suite 10.1.2.0.2,
application server 10.1.2.0.2,
Windows xp platform
For a long time, I'm hitting ORA-01000
I have a 2 group report (master and detail) using Ref Cusor query, when this report is run, I found that it opens several cursors (should be only one cursor) for the detail query although it should not, I found that the number of these cursors is equal to the number of master records.
Moreover, after the report is finished, these cursors are not closed, and they are increasing cumulatively each time I run the report, and finally the maximum number of open cursors is exceeded, and thus I get ORA-01000.
I increased the open cursors parameter for the database to an unbeleivable value 30000, but of course it will be exceeded during the session because the cursors are increasing cumulatively.
I Found that this problem is solved when using only one master Ref Cursor Query and create a breake group, the problem is solved also if we use SQL Query instead of Ref Query for the master and detail queries, but for some considerations, I should not use neither breake group nor SQL Query, I have to use REF Cursor queries.
Is this an oracle bug , and how can I overcome ?
Thanks
Edited by: Mostafa Abolaynain on May 6, 2012 9:58 AMThank you Inol for your answer, However
Ref Cursor give me felxibility to control the query, for example see the following query :
function QR_1RefCurDS return DEF_CURSORS.JOURHEAD_REFCUR is
temp_JOURHEAD DEF_CURSORS.JOURHEAD_refcur;
v_from_date DATE;
v_to_date DATE;
V_SERIAL_TYPE number;
begin
SELECT SERIAL_TYPE INTO V_SERIAL_TYPE
FROM ACC_VOUCHER_TYPES
where voucher_type='J'
and IDENT_NO=:IDENT
AND COMP_NO=TO_NUMBER(:COMPANY_NO);
IF :no_date=1 then
IF V_SERIAL_TYPE =1 THEN
open temp_JOURHEAD for select VOCH_NO, VOCH_DATE
FROM JOURHEAD
WHERE COMP_NO=TO_NUMBER(:COMPANY_NO)
AND IDENT=:IDENT
AND ((TO_NUMBER(VOCH_NO)=:FROM_NO and :FROM_NO IS NOT NULL AND :TO_NO IS NULL)
OR (TO_NUMBER(VOCH_NO) BETWEEN :FROM_NO AND :TO_NO and :FROM_NO IS NOT NULL AND :TO_NO IS NOT NULL )
OR (TO_NUMBER(VOCH_NO)<=:TO_NO and :FROM_NO IS NULL AND :TO_NO IS NOT NULL )
OR (:FROM_NO IS NULL AND :TO_NO IS NULL ))
ORDER BY TO_NUMBER(VOCH_NO);
ELSE
open temp_JOURHEAD for select VOCH_NO, VOCH_DATE
FROM JOURHEAD
WHERE COMP_NO=TO_NUMBER(:COMPANY_NO)
AND IDENT=:IDENT
AND ((VOCH_NO=:FROM_NO and :FROM_NO IS NOT NULL AND :TO_NO IS NULL)
OR (VOCH_NO BETWEEN :FROM_NO AND :TO_NO and :FROM_NO IS NOT NULL AND :TO_NO IS NOT NULL )
OR (VOCH_NO<=:TO_NO and :FROM_NO IS NULL AND :TO_NO IS NOT NULL )
OR (:FROM_NO IS NULL AND :TO_NO IS NULL ))
ORDER BY VOCH_NO;
END IF;
ELSE
v_from_date:=to_DATE(:from_date);
v_to_date:=to_DATE(:to_date);
IF V_SERIAL_TYPE =1 THEN
open temp_JOURHEAD for select VOCH_NO, VOCH_DATE
FROM JOURHEAD
WHERE COMP_NO=TO_NUMBER(:COMPANY_NO)
AND IDENT=:IDENT
AND ((voch_date between v_from_date and v_to_date and :from_date is not null and :to_date is not null)
OR (voch_date <= v_to_date and :from_date is null and :to_date is not null)
OR (voch_date = v_from_date and :from_date is not null and :to_date is null)
OR (:from_date is null and :to_date is null ))
ORDER BY VOCH_DATE,TO_NUMBER(VOCH_NO);
ELSE
open temp_JOURHEAD for select VOCH_NO, VOCH_DATE
FROM JOURHEAD
WHERE COMP_NO=TO_NUMBER(:COMPANY_NO)
AND IDENT=:IDENT
AND ((voch_date between v_from_date and v_to_date and :from_date is not null and :to_date is not null)
OR (voch_date <= v_to_date and :from_date is null and :to_date is not null)
OR (voch_date = v_from_date and :from_date is not null and :to_date is null)
OR (:from_date is null and :to_date is null ))
ORDER BY VOCH_DATE,VOCH_NO;
END IF;
END IF;
return temp_JOURHEAD;
end; -
My mail app will not open at all, it just gets stuck half open and then when i go to the icon below it says the app is not responding, is this something i can fix myself?
Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Quit Mail.
Triple-click the line below to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Relaunch Mail and test. If the problem is resolved, you'll have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return. -
i can download for about 20 min then i try to go to another page by opening a new tab or using a bookmark Firefox totally freeze's up so i have to close down and go into the task mngr and shut down the process for firefox and restart because if i do not do that it will not open back up i am using vista home pro on a 64 bit system please help this very bothersome
This issue can be caused by an extension or plugin that isn't working properly.
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]] -
Additional information: I have Tab Mix Plus and UnLoadTab installed, and neither of them is set to load the tab(s) before selected manually.
In the tabs menu under the Firefox Menu > Options > Tabs section, is do not load tabs until selected also checked?
Does this also happen when the add ons are disabled? [[Troubleshoot Firefox issues using Safe Mode]] -
Page break not applying when using sub report inside main report
I have a main report inside which there is subreport (using SQL Server 2012). I placed some page breaks inside subreport but they were not working. I read on technet forums that this is a a known issue with SSRS.
One solution I found is to put a table inside main report, then in first row add a rectangle and set its property "Add a page break after" and then add subreport after this rectangle in that table in main report. I did that and now in some cases
it does show sub report on a separate page but sometimes it shows subreport on same page.
Could it be because in some case sub report has no or less data (hence it cannot cover whole page) and in that case it will always show on one page? How can I show empty subreport on a separate page?I fixed it by clicking both "Add a page break before" and "Add a page break after" in rectangle.
Maybe you are looking for
-
HOW TO: Your very own Adobe Update Server (Windows)
Well, I thought I'd contribute something after wasting time sifting through info on how to get this done. It's not a hard process at all, once the steps get organized correctly. If you are reading this post, you most likely have already seen: http://
-
Why do we need to create an emergency file?
Please see the link http://help.sap.com/saphelp_47x200/helpdata/en/9f/db95e635c111d1829f0000e829fbfe/content.htm Why do we need to create an emergency file?
-
Is there a way to decide on which audio time-line the audio is put when dragging a clip from the viewer (or browser). I can't find out the logic how it works... Thank you
-
How to uninstall a program in the macbook?
Any answers?
-
How to block capturing screen-shot from within a Java Swing program?