UserTracking on ISR Routers - How can I do UT on HWICs ?

Hi,
I have several ISR one's i.e. C2801 and C1841 in my network.
They are deployed with HWIC ethernet switch modules:
HWIC-D-9ESW - C2801
HWIC-4ESW - C1841
I seem to be unable to discover end hosts connected directly into these ports.
If I have a switch connected to the HWIC ports instead and the end hosts resides in the ports in the switch there are no problem.
Routers are managed all right in all other matters.
I think this is a design issue the UT is not done on router ports, and that the HWIC are treated at router ports instead on switch ports.
How can I do UT on HWICs ?

You are correct. UT does not support switch ports on routers. Support for the BRIDGE-MIB has only recently been added to those platforms (in 15.x code), but UT has not been updated to treat those routers as potential L2-capable devices. There is no workaround for this at this time.

Similar Messages

How can i upgrade system IOS images of routers, switches and firewalls

Hi,
I am very much surprised and less of understanding yet how Cisco's licensing program or IOS upgrades are done. I have many routers, switches & ASA's of whom i wan to upgrade the IOS's but i cannot do so. How ever i can download those images from internet but i want to know how can i do this from Cisco as i don't want to trust those IOS's available over internet.
As per my study what i have found that i need to have Cisco Service Contract number for that devices so that i can download updated IOS Images for them.
Someone kindly explain what are the best methods for the above requirements.
Regards
@Mohammed

You're correct regarding a service contract. Cisco calls this Smartnet support. It includes both hardware support (i.e. returns for failed hardware), software support (including right to download and upgrade your software) and technical assistance (via the Cisco TAC). Smartnet is charged separately for each covered device. Once you have it, your cisco.com userid needs to be associated with your service contract number. Doing that will then allow you to download the software from cisco.com. (There are some very limited cases in which you don't have to have a support contract - mostly when there is a security advisory (PSIRT) indicating the Cisco software was flawed as it was initially released.)
Every product (or product family) has a product support page on cisco.com. That page includes release notes, configuration guide, users guides, and a link to software downloads for that product. Start by reading the release notes and determining which (if any) upgrade is appropriate for your product. Then you can download and upgrade the software as necessary.

My speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished

my speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished

Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.

When I try to get on the internet thru safari at home, on my network, I get a pop up that says Safari cannot open the page because it is not connected to the Internet. How can this be and how do I fix it?

when I try to get on the internet thru safari at home, on my network, I get a pop up that says Safari cannot open the page because it is not connected to the Internet. How can this be and how do I fix it?

Does the iPod connect to other networks?
Do other device connect?
Did the iPod connect to this network before?
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>GeneralReset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Iphone4 would not restore Error -50. I have tried to restore and it restored it to the point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out.

Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????

It tells you to go to Error 13 and 14 if you receive error (-50).
Here is what I have tried...
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
Put a USB 2.0 hub between the device and the computer. Didn't change anything.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts. Removed all virus protection and firewall.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this.

My MacBook Pro persistently will not connect to my wireless router. The message "connection timeout" appears. What is a connection timeout and how can I fix?

My MacBook Pro persistently will not connect to my MiFi Verizon wireless router. The message "connection timeout" appears. What is a connection timeout and how can I fix?

Hi there terri900!
You may want to try configuring your router settings to match the recommended settings for iOS and OS X devices, which can be found here:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
You may also find some helpful information for troubleshooting this issue in this article, which can help you with any manner of issues with Wi-Fi connections:
Wi-Fi Quick Assist
http://support.apple.com/kb/HT1145
Take care, and thanks for visiting the Apple Support Communities.
-Braden

How can I use Time Capsule as a storage device to play my music from, but get Wifi from a different place?

I have all of my music stored on my Time Capsule, I'm using it as an external hard drive, however, my WiFi comes through my school's campus routers. How can I connect to their WiFi, but still be able to access the files on my Time Capsule?

You can set the TC to join the campus wifi but I do not recommend that method. You make the TC available to everybody in the process.. and it will be super slow. All files to and from your TC, then go via the campus routers and wifi system.
You cannot have two independent wireless connections at the same time..
You can use ethernet to the TC.. this is fastest and best method.. keeps the TC totally isolated from the network.
Or you can use a USB wireless stick in the computer to join a second wireless network.. I recommend using 5ghz as it is much faster.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

How can I create public AND private access with a wireless VPN router?

I am thinking about getting one of the new pre-n wireless routers that has a builtin VPN. I will need to have a private net for my office and a public net for my customers. On the private side- my employees will need to access all network resources and servers etc. On the public side, my customers just need to get to the Internet and maybe print on that side too.
Both sides will be DHCP.
Can I set this up with 1 device ro do I need 2? How can I do this? Any help is greatlu appreciated.
Thanks all.
Message Edited by Gman on 10-14-200607:08 PM

The only safe way to do this is to creat user groups On your server and give specific assess to the users who log into the network.
Using a single router , bifurcating a public from a private network is not possible.You will not be able to use the VPN since the users hav e to be connected to the VPN to log into your network.

How can I use my ipad in a hotel that only has ethernet connections. The apple store clerk told me that I can't use airport express unless I also have a computer with me in the hotel.

How can I use my Ipad in a hotel that only has ethernet connections? The Apple store clerk told me that travel express won't work in my hotel unless I also have a computer.

The issue with the Airport Express (or any of the Apple routers) is that you need the Airport Utility to configure it. Airport Utility works on OSX and Windows, but not on the iPad (or iPhone or iPod Touch.) It will work, if you can preconfigure the Airport correctly ahead of time, but you'd be stuck if you did need to reconfigure while at the hotel.
You can use most any other router that is configured with a web page, which means you have a chance of configuring with Safari on the iPad. If you want something somewhat portable, I use a "travel router" made by D-Link. The current model is the DAP-1350. Other companies make similar travel routers, but I have no experience with the others.

How can I know which clients are connected to my network through express and which are connected through extreme?

I have an airport express extending, through wireless, a network provided by an airport extreme. How can I know which clients are connected to my network through express and which are connected through extreme?
Here you can see both routers:
I would expect to some clients connected to the express, other than the extreme. And that's all I see: only the airport extreme appears as client of the airport express.
Below, one can see the summary of the config for both routers.
Would somebody explain it?
Thanks,
Marcelo
Message was edited by: Marcelão

please disregard this answer.
Message was edited by: Marcelão

I have airport extreme 802.11AC as a base that connect to Cable modem. How can I connect D-link DIR-655 to AE to utilize as an extender or repeat?

Hello-
I have wireless router Airport Extreme 802.11AC that connect direct to Cable modem...how can I setup the D-Link DIR-655 wireless router to AE and act as extender or repeater?. Thanks in advance.

Apple has done their best to install proprietary software in their wireless routers that is designed to only allow other Apple routers to repeat or extend the network wirelessly.
So, the chances are extremely small that a D-Link....or another other router for that matter.....could be configured to do what you ask.
There are no settings on an AirPort Extreme that would allow a D-Link device to extend the network, so all that you can do is experiment with different settings on the D-Link device to see if it might be possible for it to extend the network.
A post on a D-Link support forum might be a good idea to see if any D-Link specialists have some ideas on this topic.
Good luck.

How can I print from my windows 8 pc to my printer using my 2nd g express?

I have an hp deskjet 1055. It's just a USB printer how can I print from windows to my printer connected to my 2gen airport express? If it only works with airprint printers than why is there belkin routers that can work with any printer?

Figured it out. To print wirelessly via airport express 2nd generation you have to do some things. Download the bonjour printer thing mentioned above and have the printer plugged in to the airport express. Then run the bonjour printer thing and select your connected printer and install. Where I went wrong was I tried to print from my hp printer (1). When you install a printer with bonjour to print wirelessly it installs the same printer (2) so it's like there's 2 different printers in word or whatever you use to print. You have to select the one that says ready. Thanks for everyone's help

How can I use my MAC OS X as syslog server ??

Hi Team,
Can you please help me in configuring my MAC machine as syslog server for my Cisco routers ?? I have the devices on same network and would like to forward all syslog messages to my MAC machine for analysing them.
Thanks,

Crocosmia wrote:
Thank you for advise, will try apple store another thing how can I increase my ramm and memory
Check your machine's actual specifications here.
It looks like you can support up to 3 MByte in a 17" iMac and up to 4 Mbyte in a 20" iMac, if your cache size coordinates with the specs on the linked page.
OWC says you should be able to put 4 Gbyte into your machine here. Wherever you get the memory, it would be a good addition. This is the Apple Store listing for your machine, as near as I can figure it.

I have a ipad mini and it says that it has perect wifi yet when i go into safari it says unable to connect with the server how can i fix this?

I have a ipad mini and i have had it for less then a year, it says that i have perfect wifi up in the left corner where the wifi is always at but when ever i go into the built in safari it says that it is unable to connect with the server. How can i fix this because with out it connecting to the server or internet it is kind of useless to me. I do have ios7 if that helps

The wifi symbol only indicates the presence/signal strength of wifi. Not that you are connected.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

UserTracking on ISR Routers - How can I do UT on HWICs ?

Similar Messages

Maybe you are looking for