Uses 4 Airport Extreme w/ Broken WAN port

Does anyone know if there are any uses for an Airport Extreme 802.11n Base station that has a broken WAN port?
I find myself with a piece of hardware in this state. I am aware that AppleCare fixes these issues, but I just got to wondering. Thanks.

Yes, that's correct. Just be sure to get the AirPort Extreme in bridge mode.
With the WAN port not working, that leaves the 3 LAN ports. One will be occupied by the ethernet connection from your other router, so you'll have 2 available LAN ports for ethernet devices. If you need more LAN connections, you could add a 5 port or 8 port switch, etc.
If you want to use the AirPort Extreme to create a wireless network, and you already have another wireless router providing your network, you could setup the AirPort Extreme to effectively extend your wireless network. Use the same wireless network name, same security and same password as your "main" router and you'll have a seamless wireless network. Computers will automatically connect to the router with the strongest signal.
If you don't need to extend your network, you could use the AirPort Extreme to setup a "guest" network with a separate wireless name and password, etc.
Basically, with the WAN port dead, the only thing that you could not do is hook the Airport Extreme up directly to a modem and set it up to be the "main" router on a network.

Similar Messages

  • When using an airport extreme to extend a wireless modern, will the lan ports work?

    When using an airport extreme to extend a wireless modern, will the lAN ports work?

    The AirPort Extreme can extend the wireless signal from another Apple wireless router. When it does, the Ethernet ports on the extending AirPort router are enabled.
    Apple's "extend" feature appears to be a proprietary Apple function, so it would be extremely unlikely that an AirPort Extreme...or any other Apple router....could extend a 3rd party router product wirelessly....if that is really what you are asking here.

  • HT5022 How do i use my airport extreme to extend my wireless network, or make the signal stronger

    I have a wireless modem/router and want to use my airport extreme to strengthen the signal throughout my house...how do i do that?

    Plan to establish a permanent Ethernet cable connection from one of the available LAN <-> ports on your modem/router to the WAN "O" port on the AirPort Extreme. Locate the AirPort Exteme in a central location in the general area where more wireless coverage is desired.
    Configure the AirPort Extreme using AirPort Utility to "create" a wireless network using the exact same wireless network name, same exact wireless security settings and same exact password that your modem/router uses.
    Finally, the Extreme must be configured in Bridge Mode to operate correctly with the modem/router.
    To get everything in the proper sequence on the network....once the Extreme is configured, power off the entire network for a few minutes. Then start the modem/router first and let it run a minute by itself. Then start the Exteme next the same way. Continue starting devices the same way until the entire network is back up.

  • Can I use the Time Capsule strictly for system backup and continue to use my Airport Extreme for all my wireless needs

    I want to use the Apple Time Capsule as an external drive and continue to use my Airport Extreme for all my wireless needs. Can I do that? The reason I ask is that my Time Machine utility cannot find the TIme Capsule - it only shows me the Airport Extreme, even when I "Rescan". SO I am unable to use the Time Capsule.

    You will need to connect an Ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the WAN "O" port on the Time Capsule.
    Perform a "hard reset" on the Time Capsule by holding in the reset button for 9-10 seconds, then give it another minute to restart to a slow, blinking amber light.
    Open AirPort Utility, select the Time Capsule, and click Manual Setup
    Click the Time Capsule tab located below the row of icons to assign a name to the Time Capsule, a device password, and adjust Time Zone settings.
    Next, click the Wireless tab located to the right of the Time Capsule tab
    Change the setting for Wireless Mode to Off
    Click the Internet icon, then click the Internet Connection tab
    Connect Using = Ethernet
    Connection Sharing = Off (Bridge Mode)
    Click Update at the lower right to save the settings and allow 30 seconds for the Time Capsule to restart to a green light.
    You are all set

  • Using several Airport Extremes to create and extend corporate + guest wifi

    hello all,
    my office has purchased 6 airport extremes for our new office, AirPort Extreme 802.11ac (6th Generation), running version 7.73
    the plan was to hard wire one extreme via the wan port and create both a corporate and guest network
    then link to the others throughout the office by wirelessly extending to provide complete coverage
    after moving around the location of one or two units my coverage is now complete across the office space
    my setup is as follows:
    my network is a windows active directory setup where one of my domain controllers is my DHCP server in the range 192.168.x.x
    to enable the guest network on my extremes i need to have my first hard wired (wan port) extreme unit configured in DHCP mode
    this airport extreme has pulled down an ip address from my windows server in the range 192.168.x.x
    the extreme then uses its own dhcp range to provide connectivity to my clients, 172.16.x.x for corporate wifi and 10.0.x.x for guest wifi
    my issue is
    the dhcp range that the extreme uses for all my corporate wifi users is 172.16.x.x
    i cannot access any servers on my windows network 192.168.x.x by drive maps/hostnames as they are challenged for authentication
    I can only access by using ip addresses instead of hostnames
    all of my shares and wired users are configured to use hostnames for file shares, printers etc on my servers
    the first extreme gets its DNS info from my windows dhcp server correctly but these settings are not passed down to my wifi clients
    is there a way to do this ?
    I have tried using the 'domain name' field on the extreme dhcp config but this had made no difference
    can anyone advise on this ?
    do i need to use a different setup, maybe switch to wired config ?
    what i'd like to have is the following:
    2 wireless networks, one for corporate users and one for guests/visitors
    my corporate users to have access to all my corporate servers as their permissions allow using hostnames for access
    my guest users to have internet access only
    my 6 access points to be connected to each other either wired or wirelessly to provide coverage throughout my office
    i was told that the 6 airport extreme's would allow me to do this but now i'm not so sure
    any help or suggestions would be gratefully accepted,
    thanks

    You are trying to use Apple domestic products in a business setup.. this is not what they were designed for.
    Could you use 3 units to cover the offices.. please have a go as this simplifies things tremendously.. just use three units in bridge.. preferably all connected to your ethernet network and so operating as AP only.
    If that works then use the other 3 units for your guest network.. these should then be placed on a different vlan via your main managed switch.. so they can get internet but have no connection at all to the office network.. but other ways around it could be found. As you have already discovered a simple double NAT might sufficiently block guest access.

  • Can I use two airport extreme base station on the same network

    Can I use two airport extreme base station on the same network

    Here is my network setup:
    D-Link DCM-202 simple cable modem (DOCSIS 2.0 compliant)
    attached via ethernet to
    5th generation AirPort Extreme Base Station - Main (Bought last week)
    attached via ethernet to
    4th generation AirPort Extreme Base Station - Remote (Bought about 11 months ago)
    The main AEBS is set to:
    AirPort Section:
    Base Station Tab -> Allow setup over WAN is CHECKED
    Wireless Tab -> Wireless Mode: Creat a Wireless Network, Radio Mode: 802.11a/n - 802.11b/g, Radio Channel Selection: Automatic, Wireless Security: WPA2 Personal
    Internet Section:
    Internet Connection Tab -> Connect Using: Ethernet, Ethernet WAN Port: Automatic (Default), Connection Sharing: Share a public IP address
    TCP/IP Tab -> Configure IPv4: Using DHCP
    DHCP Tab -> DHCP Beginning Address: 10.0.1.2, DHCP Ending Address: 10.0.1.200, DHCP Lease: 24 hrs
    NAT Tab -> The box following 10.0.1. is left blank, Enable NAT Port Mapping Protocol box is CHECKED.
    The remote AEBS is set to:
    AirPort Section:
    Base Station Tab -> Allow setup over WAN is CHECKED
    Wireless Tab -> Wireless Mode: Creat a Wireless Network, Radio Mode: 802.11a/n - 802.11b/g, Radio Channel Selection: Automatic, Wireless Security: WPA2 Personal
    Internet Section:
    Internet Connection Tab -> Connect Using: Ethernet, Ethernet WAN Port: Automatic (Default), Connection Sharing: Off (Bridge Mode)
    TCP/IP Tab -> Configure IPv4: Using DHCP, IP Address: 10.0.1.2, Subnet Mask: 255.255.255.0, Router Address: 10.0.1.1, DNS Server(s): 10.0.1.1  (Everything else under this tab is blank)
    Hope this helps with info needed.

  • Silly question, maybe. I want to change from Verizon DSL to cable, but cable company doesn't supply router.  can I use my Airport Extreme as wireless router?

    We currently have the following wireless home-network configuration, powered by Verizon DSL. 
    2 macbook pro’s
    1 emachine
    HP PhotoSmart 6122 all-in-one printer
    Apple TV
    Apple Airport Extreme Base Port A 1408
    Westell 7500 router
    Thinking I’d get wider wireless coverage throughout my 2 bedroom home, I purchased the Airport Extreme. It is connected to the router via its sole usb port.  The result was only a tiny increase in speed, and no increase in coverage, so I don’t know why I have it.
    We now want to change from DSL to cable, thus ditching Verizon.  Our new cable provider supplies the cable box, but no router for wireless networking. 
    Here are my questions.
    Can I use the Airport Extreme (AE) as a wireless router? 
    If so, how should I hook it up?  Should the usb cable go from the AE to the cable box, and all the other devices connect wirelessly?
    If not, how should I be using the AE to some advantage?  What can I get out of the investment?
    Thank you very much for your help!  Beatriz

    What I wrote has nothing to do with what the cable company charges for their installation. And, usually they will help with the router setup even if you supply your own router. I don't know what they will charge for the modem.
    Note that you need to get just a modem. You don't want a modem/router combination. That will make using an AEBS effectively nearly impossible. You will need to ask specifically for just a standalone modem, and that you will supply your own router.

  • How can I use an AirPort Extreme to expand a normal Wi-Fi router range?

    I used to use my AirPort Extreme as my router, connecting it to an old modem I had. Recently, I had some problems with that modem and had it changed. Now, the new one is also a router, so I decided to use it instead of the AirPort Extreme. However, I don't want to let such an expensive router not doing anything, so I decided I would use it to expand the range of my new router/modem. Is it possible to expand the range of a non-Airport Extreme/Express router, like mine? I tried configuring it to "Expand a network", and it was even in "Bridge Mode", but even with those configurations, it's yellow light kept blinking and AirPort Utility said that it the AirPort Extreme wasn't being able expand the network, and told me to check if the normal router was on and if AirPort Extreme was within its range, and the answer is an obvious yes for both (I can assure you it's within range). Am I doing something wrong, or is it simply not possible?

    Is it possible to expand the range of a non-Airport Extreme/Express router, like mine?
    Yes, if you connect the AirPort Extreme to one of the LAN <-> ports on the modem/router using a wired Ethernet connection.
    Extremely unlikely if you are asking about having the AirPort Extreme connect wirelessly to the modem/router and extend or repeat the signal in that manner.
    The reason for this is that Apple designs their routers to only the extend the signal from another Apple router wirelessly.

  • Can I use my Airport Extreme as a wireless bridge?

    Can I use my Airport Extreme as a wireless bridge?

    When you say "wireless bridge", I assume that you want the AirPort Extreme to receive a wireless signal and provide an Ethernet output, correct?
    If you have another Apple router providing your "main" wireless network, the AirPort Extreme could possibly be configured to "Extend a wireless network".
    In that setting, the Extreme provides more wireless coverage and Ethernet ports are enabled, so you could connect an Ethernet device that way.
    But, the AirPort Extreme cannot do this with a product from another manufacturer.
    So, in order to answer your question specifically, can you provide the make and model number of your "main" router?

  • HT4145 I have an Airport Extreme bas station now and I want to know if I can use an Airport Express to extend my network or do I have to use another Airport Extreme base.

    I have an Airport Extreme Base Station now and I would like to know if I can use an Airport Express to extend my wifi network or do I have to use another Airport Extreme Base Station.

    This AirPort Express:
    http://www.apple.com/airportexpress/
    It is the only Express with 2 Ethernet ports. All others are "old"
    Apple does not specify a model number in their product information, but it is A1392 in the U.S. I do not know if Apple uses different model numbers in other countries.

  • I am using an Airport Extreme for wireless and a Netgear VPN Switch for wired connections.  How do I get the two networks to connect?

    I am using an Airport Extreme for wireless and also have a Netgear VPN Switch (FV5318) for internal wired ethernet connections.  How do I get the two networks to connect to each other?

    Tesserax, I would like to keep the Airport Extreme in nplace before the Netgear FVS318 switch because I am using all of the 8 ethernet outputs distributed to 8 differerent locationsl  This way I can just use one of the LAN outputs from the Airport to feed the FVS318.  Here is what I think I am hearing you say:
    Tne reason why the wired and wireless devices are not communicating is because the FVS318G is also a DHCP server and in conflict with the AEBS.
    To remedy the situastion here is probably what I need to do in order:
    1. Change the LAN IP Address of the Netgear FVS318G to be the same subnet of the Airport Extreme.
    2. Then, disable the Netgear FVS318G as a DHCP server.
    3. Make sure the ethernet cable from the LAN port of the Airport Extreme connectis to the LAN port of the Netgear FVS318G.
    4. Restart everything.
    Can you provide me the steps I need to take to get the right IP addresses from the Airport Extreme to put into the Netgear to fix the conflict?  I have the Airport Utility.  I also have two airport express hot spots, and two Apple TVs in addition to computers attached to the 8 ethernet lines.
    Thank you.
    Steve

  • How do I use my airport extreme with my FIOS router?

    How do I use my AirPort Extreme base station with my FIOS Router to extend my network?  I have hard disks connected to my AirPort Extreme and would lik to access them.

    Probably can't answer all your questions - but.... I use a Linksys (wired and wireless) router as my primary entry point for FIOS. I use a Time Capsule and an Airport Express as a common wireless connection. So I have two visibile wireless networks and use them both depending on where I am in the house. Both the TC and AEx can be seen either wirelessly or wired from the entire network. Note - the Linksys provides all the DHCP - you set the apple routers as "bridge mode."

  • (How) can I use my Airport Extreme to send FLAC files/iTunes to my stereo?

    (New to this topic.) Is it possible to use my Airport Extreme Base Station to send FLAC and iTunes music files to my (ParaSound P3/A23) stereo system wirelessly?
    If so, how?
    (Not interested in iOS devices doing this - just, effectively, in using my 'mid-2011'  2.7 iMac (10.7.3) as a music server
    TIA!

    Yes, add an AirPort Express and convert FLAC to Apple Lossless and iTunes will be able to play them. VLC will not help since you need iTunes to connect to the AirPort Express and VLC will not work with iTunes.
    There may be an exception to this but I've never tried it. You could try using AirFoil to connect to the AirPort Express and play your FLAC files that way but I have no guarantee it will work. AirFoil seems very flexible so it may prove to be a solution for you.
    I'm not familiar with the Sonos Bridge/Connect system so I cannot comment on the quality. I understand that it is comparable to using the AirPort Express but locking at the price it seems a more expensive solution for your needs.

  • Can I use an airport extreme to extend the range of my wireless modem

    Can I use an Airport Extreme to extend the range of my wireless modem?
    At one end of my house I have a dual band wireless ADSL modem which provides my internet connection and I want to extend (improve) the wireless coverage to the other of the hosue where my Apple TV (2nd gen) is located. I have being trying to extend my wireless network with an Airport Extreme but so far without success. I can get the Airport to join the wireless network, but I suspect that it is only acting as another client and not actually extending the wireless range. There is a setting in the Airport configuration to "extend and existing network", however when I choose this option the Airport no longer connects to my existing wireless network and I am beginning to suspect that this fuction only works with another Apple device (Airport Extreme or Express).
    Has anyone been able to extend the range of a third party wireless router / modem with an AirPort Extreme? If so, any advice that you can offer wold be appreciated.
    Regards
    Michael

    Thanks Tesserax,
    Your answer has confirmed my suspicions.
    Option 1 from your suggested solutions is not a goer because the modem and Airport Extreme are in different parts of the house making it impractical to run a cable between the two devices. 
    I did try option 2 and bought a Netgear range extender, which according to Netgear it would work with my D-Link modem - not.
    However I have managed to work around the problem (sort of) by using the Airport Extreme to create a wireless network between my iMac 27 and my Apple TV. The idea is that the iMac will act as a router between ethernet connected ADSL modem and the wirelessly connected Apple TV.
    The good news is that I am now able to play the content from my iTunes library on my Apple TV without interruptions due to a poor wireless connection . Although the connection from the Apple TV to the internet is not working I think this is most likely just a configuration issue and for me it is not really a show stopper.

  • I have Verizon FiOS service for phone, internet and TV but I only have one TV hooked up for it for just basic cable service with no DVR and no need for widgets.  Can I use an Airport Extreme as my router and not use the FiOs router?

    I want to use an Airport Extreme as my router.  I currently have a Verizon FiOS router.  I have Verizon for phone, internet and TV.  However, TV-wise, I just have a basic service for one TV with just a regular box.  No HD, no DVR.  Don't need access to a menu, widgets, on-demand.  Can I eliminate the FiOS Router and just use the Airport Extreme and still have phone and internet?

    I know that it will increase my wireless coverage in my house but will it increase the speeds?
    Not sure what you are asking here.  The AirPort Extreme is only going to be as fast as the Internet connection that it receives.....which is 75/75. It cannot take a 75/75 connection and make it go any faster.
    If you locate the AirPort Extreme in an area where you need more wireless signal coverage, the AirPort Extreme would deliver 75/75 in that area.  But, keep in mind that the AirPort Extreme must connect to the FIOS router using a permanent, wired Ethernet cable connection.
    If you are asking if the AirPort Extreme can wirelessly connect to the FIOS modem router, and extend the FIOS wireless network, the AirPort Extreme would not be compatible with a FIOS product for that purpose.

Maybe you are looking for