Using 1.920 x 1.080 pixel panasonic plasma screen with Mac Mini Intel

Do you know if i can connect a mac mini
with a belkin "dvi to hdmi" cable
to a panasonic plasma screen with a 1.920 x 1.080 resolution (screen 42 inches)?
I thought the screen was too big, but some friend told me that the resolution i supported by the mac mini.
thanks.

Yes, specs-wise the TV is able to be driven by the Mac mini both via DVI and VGA.

Similar Messages

How to use a mac mini intel with 30" cinema display

Arg, I just bought an Apple 30" cinema display to go with my new Mac mini intel, but oops the 30" apple cinema display has to use a dual link dvi card. Anyone know how to get out of this horrible situation without buying another new computer.
Thanks!

If you want to run the LCD at it's high 2560x1600 resolution, then you have absolutely no option whatsoever than to buy a PowerMac or MacBook Pro. Otherwise, you will be able to run the panel at 1280x800 with the Mac mini, which wouldn't make much sense though.

The best audio interface with Mac Mini using new & existing equipment?

Hi,
I got my existing set-up back in 2003. I'm now about to update it.
I've talked to Apple Technical Support re which computer is best for me.
Some important questions remain in terms of the audio interface or sound bridge I should use.
I've detailed below my existing set-up, my existing configuration, my desired set-up (as recommended by Apple expert) and questions I have.
Existing set-up:
Hardware...
1. ViewSonic HDMI 1080p Full HD LED monitor
2. PowerMac G4 (PowerPC processor) computer
3. PCI-424 soundcard within computer (works in conjunction with MOTU 2408 mk3 unit)
4. MOTU 2408 mk3
5. Quested monitors
6. Focusrite Session Pack ff ISA220 compressor
7. MOTU micro lite (midi-usb interface)
8. Keyboard (yet to choose - I'll explain later)
9. ADK Tube Condenser Commemorative Edition microphone
10. ADK Tube Condenser Commemorative Edition microphone power box (supplies both power and phantom power)
Software...
11. Tiger 10.4.11 operating system
12. Logic Studio 8 music program
Desired set-up:
1. ViewSonic HDMI 1080p Full HD LED monitor
2. Mac Mini full spec = £999.00
3. _______________________________________
4. _______________________________________
5. Quested monitors
6. _______________________________________
7. _______________________________________
8. _______________________________________
9. ADK Tube Condenser Commemorative Edition microphone
10. ADK Tube Condenser Commemorative Edition microphone power box (supplies both power and phantom power)
Software...
11. Top-end operating system = Comes with Mac Mini
12. Logic Pro X music program = £139.99
Existing configuration:
ViewSonic HDMI 1080p Full HD LED monitor goes into PowerMac G4 (PowerPC processor) computer
PCI-424 soundcard within computer (works in conjunction with MOTU 2408 mk3 unit)
MOTU 2408 mk3 used as my audio interface for sound in and sound out. This means that the sound comes out of computer via the MOTU 2408 and out of my Quested monitors (they are active so self-powered) which are attached to the MOTU's outputs.
When I record vocals I sing into my ADK microphone (this microphone sources its own power from its own box which also feeds it Phantom Power) which is connected by a mic to jack cable to the Focusrite compressor which is connected by jack to jack cable to the MOTU 2408 which then goes into my computer via a firewire cable.
When I play keyboards or use my keyboard as a midi controller it connects to my computer via the MOTU micro lite (midi-usb interface).
I don't currently have a keyboard. I used to use my basic Yamaha PSR-540 keyboard as a midi controller but as it's not weighted and faulty I needed to get a new one. We got a new one via Thomann which was the M-Audio Pro Keys 88 keyboard but this quickly became faulty. We returned it and have since been considering other weighted keyboards. I am simply wanting a keyboard with Aftertouch, either 76 or 88 keys, weighted keys and very importantly, hammer action where the action is fast. I don't care for other controllers on the keyboard, on-board sounds, iPad compatibility or whatever.
My Questions:
Q1) Can you recommend any keyboards meeting my specifications?
Q2) I can't imagine any of the Blue or other USB mics competing with my ADK and I'm quite happy with it. For vocals and when I've wanted to play the keyboard in as audio (not as a midi controller) I've used the Focusrite compressor to boost the sound. I'm not using many functions/presets on the compressor as I know it's best to record the sound of vocals mostly raw, is this correct, and if so is it worth me continuing to use this compressor or sell it?
Q3) Do I need to have the MOTU micro lite (midi to usb) unit? Don't most keyboards these days connect direct usb to usb on the computer?
Q4) I'm happy and used to the sound out from my Quested monitors. I'm happy and used to the sound in using my ADK microphone. What do I need for these to work best with the Mac Mini? Is my MOTU 2408 good for this, or is another MOTU product needed, or another product altogether?
Q5) Depending on (Q4) do I need a soundcard installed in the Mac Mini as I read on a forum that these days the audio interface acts like the soundcard?
Q6) I have such a bad connection to the internet it's like I have Dial-up!!! I use Airport Wireless which is connected to a router downstairs, which is 02 Broadband. Internet's not an issue downstairs on my girlfriend's intel PC which also uses a wireless connection but not Airport. Is this a problem because of my Airport, or do I need to get a router for upstairs, or should I connect it directy to the router downstairs by ethernet cable?
Many thanks!

Is there a reason you don't want to use your current Tascam?

I can't use my Philips monitor with Mac mini

I can't use my Philips monitor with Mac mini, I am using a HDMI to VGA cable to connect them. But no signal on my Philips monitor.
My Mac mini is in a good condition, it can connect with my HDTV, the BENQ monitor at my office, but I can't make it connect with my Philips monitor.
I dun know what happen.
Please help!
Thanks!

The two are incompatible, HDMI is a digital signal and VGA is an analog signal. You need a monitor with a HDMI port or a DVI-I port, these are both digital signals. DVI-I gives the best output.

Using tv for monitor with Mac mini

Using my 46 inche sharp as my screen for Mac mini. But sitting on couch it is hard to see things on the screen. Is there a setting to change the size view?

Change to a different progressive (p) resolution on Apple menu -> System Preferences -> Displays. The higher the (p) value the smaller the text. Use the zoom functions on Apple menu -> System Preferences -> Universal Access if you want to maintain the resolution and temporarily zoom on items to make them readable.

While using my apple tv....it turns on my mac mini iTunes library on my computer and plays music. How do I stop this?

Please help....since I moved now my apple tv is picking up on my mac mini iTunes and playing it when I use the apple tv remote. How do I disable the mac mini air play?

Hi twigs9,
If you are having issues with your Apple TV remote inadvertantly controlling your Mac Mini, you may find the following article helpful:
Apple TV: Apple Remote unexpectedly controls a Mac
http://support.apple.com/kb/HT4513
Regards,
- Brenden

Use 24 in iMac as a screen for mac mini

Can I use 24 in iMac as screen for mac mini?

I can see that there is no way to use the iMac screen thru standard methods. As the iMac is out of warranty and the DVD/CD drive no longer works I am willing to have the iMac's case opened and have some jerry-rigged solution installed. Does anyone have an idea as to how that can be done

Can I still use Appleworks 6.2.9 with Mac Mini 2012?

Can I still use Appleworks 6.2.9 with Mac Mini 2012?

Yes, MlchaelLAX, the KVM switch allow one to use one monitor, one keyboard, and one mouse between two computers. It has been so long that I'm not sure how to find the MODELS to the G4 and G5. Unless you mean what makes the Mac tick. The G5 is a dual 2GHz PowerPC, with 2 GB DDR SDRAM. The G4 is a bit slower, will look tomorrow.
I want/need a newer Mac model because unlike the days before OS X, all software was included as the newer OS were added, not so today. I'm still using Tiger because I still use a couple programs from the old days. When I eventually purchase a new model, I will have to buy all new software. That's find if one has plenty of money and wants to learn everything from scratch, but I'm hanging on as long as I can.
I tried TenFourFox, but it didn't allow video, of course since I tried Michael's suggestion, the video might not be an issue. So far, every thing works the way it should.
I have a lot of faith in Mac users, their loyalties to Apple is what kept Apple floating when many thought it would sink. These folks are survivors; I only wish the apple people on the top appreciated that loyalty today, but I guess things are too good.
Thanks to all for you kindness. Tomorrow I will show my husband how to remove his yellow threat on his G4. If anyone can answer any other questions, please know I will keep viewing this post.
Patt

Using CS2/Flash Pro 8 with Mac Mini...

Hello Everyone,
I am considering purchasing a mac mini and integrating it into my home theater, which I imagine would be awesome. I was wondering though if I would get good performance out of it when using Creative Suite 2/Flash Pro 8. Some people I've talked to say 'yea' and some say 'nay'. Opinions appreciated.
-Ricky Bobby

hello my friend. I am graphic designer, and buys one mac mini intel to me, but is a small problem! the applications cs2 and study 8 not made update for the processor intel, run very badly. I recommend that if you must power PC G5 you are with her until half of next year, when it leaves to the market the new updates the programs, if no, beam as I and work a little slow but with a better equipment until they leave these updates.

Has anyone actually used the Apple USB "rescue" drive on a 2011 MBA or Mac Mini?

I am getting conflicting information as to whether the $69.00 Lion USB "Rescue drive" will function on a mid 2011 MacBook Air or a Mid 2011 Mac Mini. (Yes, I know it will work on the 2011 MacBook Pros).
1) The local Apple Store Genius Bar personell say that it will not work. It has 10.7.0 Build 11A511, and the 2011 MBA's and Mac Mini's require at least 10.7.0 Build 11A2063 and 11A20621, respectively.
2) Several people have answered this question in the Q&A section of the online Apple Store that it will work on a mid 2011 MBA.
3) I contacted Apple, via the Chat system within the online Apple Store, and they are kinda sure that it will work. But in any case, if I were to get it to work it would ace my recovery partition, and forever NEVER let me use a recovery partition on that Mac again.
So, I am left with the most reasonable avenue to obtain a correct answer. I ask if anyone has sucessfully used this drive on a mid 2011 MBA or mid 2011 Mac Mini.

Given the nature of backups, my recommendation has always been to use a strategy that is unequivocally supported by Apple. As you already determined Apple Support unequivocally informed you that your proposal will not work, unless your router is an Apple AirPort Extreme or Time Capsule.
The exhaustive list of devices supported by Time Machine amounts to the following:
AirPort Time Capsule's built-in hard disk (any model)
External USB hard disk drive connected to a Time Capsule (any model)
External USB hard disk drive connected to an AirPort Extreme (current model only)
A hard disk drive directly connected to your Mac
That is all.
Use whatever backup device you want, but you should be aware that this site is full of reports of misery from hapless individuals who had been using NAS devices for Time Machine backups, only to find that they were incomplete, corrupted, or useless when they were required. Apple won't care if you lose your data while using a Time Machine configuration specifically excluded from their technical support documents.

How can I use Pegasus R6 with Mac mini?

I bought Pegasus R6 (Promise Technology, Inc). I connected to my Mac mini. But Pegasus R6 did not appear on desktop. In order to use Pegasus, MacBook Pro?iMac must have MacBook Pro EFI Firmware Update installed. But Mac mini does not have EFI Firmware Update. How can I use Pegasus R6 with Mac mini?

Does your Mac Mini have thunderbolt?

Can you use hdmi to rgb composite cable with Mac mini

I am thinkining of getting a mac mini .vI have a older jvc 2004 wit rgb composite conection .Can you use hdmi to rgb composite cable with Mac mini or do yo have to use a hdmi to composite converter to hook up to the tv wit Mac mini

12. Can I output via Mini DisplayPort to an RCA or S-Video connection?
No. The Mini DIsplayPort connector allows output to Mini DisplayPort, DisplayPort, VGA, DVI, and HDMI connections when using the proper cables and adapters. However, output to RCA, Component, or S-Video connections is not supported.
- The current Mini as one HDMI out. The Min somes with a HDMI to DVI adopter. Howver, the HDMI output only outputs digital signal and thus yo will need a converter to convert that digital signal to analogue composite
- The Min also comes with a Thunderbolt port which accepts the min display connector. However. based on 12 above it does not seem to support composite. The 12 is from
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)

Which Display To Use with mac mini?

Is it possible to use an iMac Desktop computer as a display for a mac mini?
Does anyone have the range of different monitors that can be used as a display for the mac mini?
Both answers are crucial to buying a mac mini.
iMac Mac OS X (10.4.5) 600 MHz Power PC G 3 512 MB SDRAM

Not directly. You can of course connect to the mini using remote desktop (included with Mac OS - enable it on the Services tab of Security preference pane) and a free VNC client.
It is not fast and snappy like a directly attached monitor - so you will want to use it ocassionally to make remote changes - not day in and day out display.
Best to get a display that supports DVI input (or HDMI) and meets your budget. Here are the specs... (it will drive VGA as well - but it's no longer a digital signal and generally less nice)
DVI video output to support digital resolutions up to 1920 by 1200 pixels; supports 20-inch Apple Cinema Display and 23-inch Apple Cinema HD Display; supports coherent digital displays up to 154MHz; supports noncoherent digital displays up to 135MHz

How do I use my iPad as the display and input device for my Mac Mini?

I plan to have the following stereo configuration:
Integrated amplifier with USB input that supports up to 24/192 audio, the Peachtree Nova 125
Mac Mini with USB connection to amp, wifi to the Internet, housed in the equipment cabinet with the integrated amp, no other music source. No display or keyboard connected to the Mac Mini.
I would like to use my iPad as the display and to control the Mac Mini to run Pandora, iTunes, Spotify, podcasts, etc.
Anyone have success with this general configuration?

You need a set of apps (one for iPad and another for computer) like Team viewer or Go to my PC

DVI to ADC adapter STudio display will not power on when used with Mac mini

I have a Mac mini and I just purchased a used apple 17" CRT studio display. I bought the DVI to ADC Adapter as recommended by my Apple store. When I hook everything up (I have checked and redone this two times) The power light will come on for about a second when presses. When the mini powers up there is a blank dark screen. I would appreciate any ideas on this. thanks!
Mac mini Mac OS X (10.4.1)

Hi
unfortunately I think the Apple store have sold you the wrong item.
I'm almost certain the DVI to ADC adapter only works with ADC based flat panel displays. DVI ports can output digital or analogue signals (or a combination of the two). The adapter seems to provide digital, which is why it works with the LCD displays, but not analogue, which is why it doesn't work with the CRT displays.
Confusingly Apple did a 17" Studio display both as a CRT and LCD.
Dr. Bott do a similar adapter but they explicitly state it's not compatible with the 17" CRT.
Unfortunately I'm not sure there's a solution, as the display has an ADC connector yet I'm not aware of any adapters available that will work.

Using 1.920 x 1.080 pixel panasonic plasma screen with Mac Mini Intel

Similar Messages

Maybe you are looking for