Using 10.1.3.4 on Windows 2008 Server

I got it installed successfully but it's not communicating with my database or java. Any suggestions?

How do you test all this?
Can you tell more about what you want to do and what you get?
Greetings.

Similar Messages

  • Windows 2008 Server crashed - How to find location of remote shared files that they used to access on remote web app?

    We have a client that was running windows 2008 server.  A previous IT person had setup their system, so we were walking into a situation where there were many unknowns.  Server was mainly handling emails only, and we were able to get their exchange
    database off and export PSTs to hosted exchange via microsoft.
    Everything went fine with that, however one user said that he used to access files on the server via the remote web app as he described.  He would go to the following url:
    https://mail.theirdomain.com/remote/menu.aspx#
    and he would use his login and then he would see several links to folders.  He could then click on those and see his desired files.  
    We were able to get the server booted again, however we could not find any of the files he described on it at all, leaving me to suspect that perhaps this remote link was accessing another PC.  
    We have the old server up and running, however the link above is no longer active because we have pointed the domain to the new hosted exchange server.  As I am still learning and my boss wanted me to research this on my own and figure out how to find
    out where these files are located.  Any advice would be greatly appreciated.  
    Just as a note I did try access mail.localhost.com/remote/menu.aspx# on the server but this did not work.  Is there any way in the IIS 7 management console to figure out where this was pointing to?  

    I figured it out - The server was using sharepoint to host these files.  I browsed localhost:987 and opened the sharepoint site locally on the server.  They had several documents to be exported, however when clicking on Open in Explorer it was
    giving an error that local client was not configured.  I installed Desktop Experience and after that was able to open it in Windows Explorer and copy all files off.  

  • Getting a Sharing Violation using CS3 when saving/refreshing our Windows 2008 box

    To be clear, this is NOT an IE issue as I don't use IE at all in development. This is a ColdFusion 10 environment. I'm fairly sure this a Windows/IIS configuration issue.
    Basic Info:
    This error happens while on XP or Windows 7
    This error does not happen when interacting with any other environment.
    Scope of issue:
    I work on both a Windows 7 and XP environment (2 laptops). I run both CS3 and CS5.5 on both machines. I have no problem whatsoever working with any linux or windows servers running a mix of ColdFusion 7 and 8. Recently our IT group brought up a Windows 2008 server running ColdFusion 10. This is the ONLY server I have this issue with and switch servers often depending on project. It MUST be either the ColdFusion 10 configuration or something with Windows/IIS. Our IT group is unable to resolve this issue on their own.
    Here is what happens.
    I save the file, then, if I view it with ANY browser (firefox, chrome, IE... etc) the file will generate a sharing violation if you attempt to save it again within 15-20 seconds. Past that point, it will save fine. No other server displays this behavior.
    So what has been done so far?
    ColdFusion:
    - On settings, class files are NOT being saved and all saved templates are set to 0. Bascially any caching of any type is disabled. (Error still persists)
    I don't know what to do in windows or IIS at this time. I've never encountered this issue before so look toward the community for solutions. Thank you.

    Moved to the ColdFusion forum.

  • Error connecting to the SAP SRV on Windows 2008 Server platform

    Hi All
    We have a problem with one of our clients they bought a new sbs windows server 2008 and we loaded sql 2005 and sap b1 SP01 PL07.
    When we did the SBO install we experience connection issues and we created odbc connection on the server using named pipes and tcp/ip (used both server name and Ip address).
    We also configured the server in configuration manager and we managed to login and solved the slow system connection issue. We also created odbc connection on the client machines. (Machine are on a workgroup and users have administration access on all machines),we also installed native client on all machines.
    After the first batch of client installs we managed to have connection, they were other computers which were left out during the first client install and now the client want to do the remaining machines connected to SBO. On every machine that we install now we get the same error :-
    *Connection failed:
    SQLState:'08001'
    SQl Server error:10060
    [Microsoft][SQL Native Client] TCP Provider: A connection attempt failed because the connected party didnot properly repsond after a period of time, or established connection failed because connected host has failed to respond.
    Connectioin failed:
    SQLState:'HYT00'
    SQL Server Error:0
    [Microsoft][SQL Native Client]Login timeout expired
    Connection failed:
    SQLState:'08001'
    SQL Server Error: 10060
    [Microsoft][SQL Native client] An error has occurred while establishing a connection to the server. When connecting to the sql server 2005, this failure may be cause by the that*
    Please help as most user who need access can't login and they are the main users.
    rgds,
    Bongani Dlamini

    Hi Eric,
    yes we are using Windows 2008 SBS for the SAP EHP4 FOR SAP ERP 6.0/NW7.01 installation.
    we tried to create the key but it says access is denied.
    Actual thing is we got the server with Windows 2008 server 64 bit SBS (standard FE) with Domain Controller (DC) configuration.
    We have removed the DC using dcpromo to convert into Wokgroup and tried the SAP installation.
    I hope you got the idea and please let me know any further suggestions or it is the problem with the license.
    Thanks & Regards,
    Prabhu Reddy.

  • Bank Statement management in SAP B1 on a VMWare Windows 2008 server

    Hi everybody,
    One of our customer is using a VMWare Windows 2008 server with SAP B1.
    Actual version of Business One is SBO 2007A PL 00 PL 15 (SQL Server 2005).
    Since the installation of this server using VMWare, we encouter problems using the SAP B1 Integration Platform for the process of the bank statements.
    Everything including bank statements transfer was working very fine on a "real" server before new implementation.
    When trying to open the Integration Platform Control Center on the server, we now receive the following message regarding JAVA.
    "JAVA Virtual Machine Launcher : could not find the main class : program will exit."
    JAVA is well installed on the VMWare server.
    We have searched for a solution on the Web and it seems that JAVA and VMWare are not compatible. Does anybody have any information about that ?
    Does anybody already have this problem with Integration Platfom on VMWare server ?
    Is there a solution to our problem ?
    Thanks for all your contributions.
    Best regards.
    Michel

    Hi Michel,
    First of all, your PL is too low.  AFAIK, the first supported PL for 2007A SP00 is PL30.  You may upgrade your PL first to see if that is a bug or not.
    Thanks,
    Gordon

  • Crystal Reports 2011 not working in windows 2008 server CITRIX

    Hi All,
    We are using  Crystal reports 2011 in windows 2008 server which is CITRIX farm., having crystal reports 2011 runtime in it..
    We are using .net applicationton to run the reports.
    The crystal reports parameter popup is getting opened. But the calendar icon is not fuctioning ..clicking on the calendar control no pop up appears. no error too..
    OK button is not responding. Cancel button too.
    Can you please help us why we are facing this issue in CITRIX only. When we are using the same version in desktop, Crystal report is working fine.
    Please feel free to ask if required any more details about my problem.
    Regards,
    Venkat.K

    Ido's idea is excellent, only addition I'd like to make is the following:
    You are trying to run a .NET app. However, CR 2011 does not install any SDKs. So, the directory specified by Ido is not correct. Assuming that by CR 2011 you actually mean "SAP Crystal Reports, Developer Version for Visual Studio .NET", then the directory would be:
    C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\Crystal Reports 2011\crystalreportviewers\prompting
    If that does not help, use Process Monitor and see what the logs tell you (look for Access Denied messages).
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Windows 2008 Server and HP Color LaserJet 2605dn Driver Issue when Sharing Printer

    I have a HP Color LaserJet 2605dn printer that I need to setup on a Windows 2008 server.  I need the server to act as a Print server, but I have been unable to get any drivers to load other than the 64 Bit Universal drivers.  Because most of the company uses XP (32 and 64 bit), I also need to load those drivers under additional drivers; however, I have been unable to load them, when I point to the INF file (any of the 10 that unzip from the driver package), it says it is not for this printer.  I have even tried the generic 32 bit PS and it says the same thing.  Any ideas on what I am doing incorrectly or where to get the drivers that I need?
    Thanks,
    Gary

    Hello, I have the same problem. For the 2605 Printer is only the universal print driver available. Is seems that HP is to be lazy about making new 2008 driver.

  • Cant add a printer in Windows 2008 Server printer server HP LaserJet P1606dn

    Hello,
    I am trying to install a HP LaserJet P1606dn printer in a Windows 2008 Server Virtual machine.
    The printer is connected to the corporate network and I am able to do ping from my desktop to the printer.
    Then I follow this steps.
    1.- Install the driver application for W2008 Server.
    2.- Add printer in W2008 Printer Server.
    3.-Select "add a local or network printer" as an administrator.
    4.- Choose network printer
    5.-Create a new port --> Standard TCP/IP Port
    6.- Fill the host name ---> ("printer1") or IP address --> (XX.XXX.XX.13)  I have tried the both options separately but with no result. And fill the port name
    7.-At this stage . W2008 Server tells me that " the device is not found on the network" . Be sure that: .....
     So, in select device type, I select  "Standard" and "Generic Network Card"  and click on Next
    8.- Install printer driver  -> I select the proper driver HP LaserJet 1606dn
    9.- Install the printer driver ---> use the driver that is currently installed (recommend)
    10.- Type printer name --> "printer1"
    11.-Share printer name ---> "printer1"
    Here, begins the problem. Trying to print a test page, It says me that  "A test page has been sent to your printer", I can see the document in the queue, but the printer page it isn`t thrown away outside.
    I dont explain myself why, I have done several trials, and I dont know what happens
    I would be very grateful if somebody could help me to solve this issue
    Many Thanks
    Robert

    Hi lespaul80,
     1st- check if you can connect to your printer on web interface(in IE: \\printer ip address
    and check under network setup  if subnet mask and  def. gateway setup
    also if you have DNS setup check it too
    check if you have SNMP options - desable it
    on server try ad printer by direct IP and try use upd drive(PCL6 or PS)
    Hope it help you
    Regards,
    I am an HP employee.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    *Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.*

  • Windows 2008 Server R2 64 bit what version of server applications?

    Hi, I'm new here please let me know what version of the OAS [Oracle Applikation Server] is required for the server running Windows 2008 Server R2 64 bit? Server wants to use the forms. I will be grateful for links to the version.
    I greet.

    Hi,
    As far as I can see OAS is not supported on Windows 2008 R2. You can have a look here:
    http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html
    10gR3 - http://www.oracle.com/technetwork/middleware/ias/downloads/oracle-soa-certification-r3-10-131499.xls
    10gR2 - http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html
    Regards Peter Lorenzen

  • Windows 2008 server with a Z77A-GD65 m/b?

    Hi,
    I picked up a Z77A-GD65 last evening assuming I could install Windows 2008 server on it.  Upon trying, the install DVD doesn't even see the hard drives.
    Any suggestions?  Is this m/b not compatible with Win 2008 servers?
    Thanks!
    --Ben

    Try loading the AHCI drivers just like you would raid drivers.
    (Intel Rapid Storage Drivers)
    http://www.msi.com/product/mb/Z77A-GD65.html#/?div=Driver&os=Win7%2064
    If you are trying to use SATA_7 or SATA_8 you will need to load the AS Media controller drivers:

  • Windows 2008 Server R2 - Service Pack 1 Failed to install

    A few nights ago I deployed Service Pack 1 for Windows 2008 Server R2 x64.  The update failed to install after 3 attempts using the Windows Update manager.  After the third time I checked the system properties which states that SP1 is
    installed, yet it never appeared to install successfully as my other server machine had a prompt stating the SP was installed successfully. 
    In update history it shows the 3 failed attempts with no successes.  This morning I began running into memory errors which are impacting my 2 VM Ware sessions which in turn lock up my virtual machine so I am going to attempt to remove and reinstall
    to see if this corrects my issue.  By the way what triggered the install of SP1 is random reboots of my server.  This is that unknown Kernal Power Error which I have yet to resolve.  Some months my server randomly reboots one time and other
    months 4-5x.  That is neither here nor there, the point of this discussion is to resolve SP1. 
    I have tried to remove SP1 by means of Control Panel, Programs and Features, Installed Updates.  So it shows the that the SP1 installed in multiple areas yet in the install history no signs of successful installation.
    When trying to uninstall from Program and Features/Installed Updates section in control panel it cycles through like its going to uninstall, but after several minutes I receive the following error      Windows Update     
    An error has occurred. Not all of the updates were successfully uninstalled.
    When trying to uninstall from the command prompt (as administrator) "wusa.exe /uninstall /kb:976932" I get the following popup            Windows Update Standalone Installer        
    Installer encountered an error: 0x80073712       The component store has been corrupted.
    Now if I try and install through the network installer file name "windows6.1-KB976932-X64.exe" I get "Windows Server 2008 R2 Service Pack 1 is already installed"
    I performed these steps in the order mentioned which I came across this "System Update Readiness Tool for Windows Server 2008 R2 x64 Edition (KB947821) [February 2011]" After applying this hotfix I went through the same steps as mentioned above with the
    exact same results.
    It is unfortuante I did not come across this hotfix before I attempted install SP1 as it appears as if this would have prepared the system for SP1 installation.  Currently I am in limbo with a corrupt installation of SP1 and so far no means of uninstalling
    short of a reinstallation or repair of the OS which I am not willing to do at this point in time.
    If anyone has any suggestions please chime in and let me know what I can try.  Thanks for all the support and hopefully this post will help others in the future.

    Maybe a little bit late, but I was running almost same problem on a exchange server.
    Scenario:
    First attempt to Update the windows patches - excluded the patches from the last 2 months.
    I was kind a new to this, and didnt noticed that Windows Service pack must have at least 8GB free disk space.(Recommended)
    So the C:\ partition had less then 5 GB free disk space, and I started the updates.
    All went well until Windows SP1 begun running to downloading and installing.
    When the installer noticed there wasnt enough space, It stopped, it give the status Failed, en when scaling up the C:\partition with another 10GB more space, the C:\partition had 18GB free disk space.
    Tried to Call up a new attemp to install the SP1... but with no succes to start the SP1 installation...
    I tried to reinstall but the windows update didnt get offered again to install again or resume or anything to try again...
    Maybe...it is handy for Mickysoft, to check before installing, so the install wont get corrupted, and can install when c:\ partition has enough disk space.
    What was the trick:
    1) Stop the windows Update Service
    2) C:\Windows\SoftwareDistribution\DataStore - Delete content
    3) C:\Windows\SoftwareDistribution\Download - Delete content
    4) Windows update Service check if its runs again
    5) Check again for windows updates - Check if Windows Server Service pack 1 is offered, and install reboot and youre good to go.
    It works for me :) hopefully after 3 years you had found a solution, but since I was poping for a solution and found this article with no solution.
    I tought it will be hopefull for others to respond to this article with a solution.
    Kind regards,
    Alexander Tjintjelaar
    Micky soft noob

  • Windows 2008 Server on Sunfire V20z Server

    I am looking to install Windows 2008 Server (Standard Edition) on a retired Sunfire V20z server. The box is totally raw - i.e. new drives with no OS. The problem is that the Win2008 install disc is a DVD and the V20z only has a CD-ROM drive. I purchased an external DVD USB drive, but the BIOS does not support booting from the USB. I'm thinking updating the BIOS to version 1.35.3.2, but I can't find any documentation that it even supports USB booting.
    Anyone have any ideas on how I can install Win2008 server on this raw box?

    Depending on what other resources you have to hand I'd use one of the following approaches. Note: I don't have a V20z but the following approach has worked on other machines which had no DVD drive.
    Open the box and temporarily connect a slimline IDE DVD-ROM in lieu of the built in CDROM. I've found that while there is often a proprietary interface on the M/B the connection at the drive end can normally be dismantled and connected to another drive. I use one salvaged from an IBM P3 based Netvista.
    or
    Download the Microsoft WAIK and generate a Windows PE CDROM. Insert that into the CD drive and place the Windows 2008 DVD in the USB DVD drive. Boot the machine from the CD and then launch the Windows setup program from the USB DVD. The process for creating the Windows PE CDROM is straightforward and is covered in the Windows PE User's Guide as provided in the WAIK but here are the steps.
    Launch the Deployment Tools Command Prompt and run the following commands ( for amd64 )
    copype amd64 C:\winpe_amd64
    copy c:\winpe_amd64\winpe.wim c:\winpe_amd64\ISO\sources\boot.wim
    oscdimg -n -bC:\winpe_amd64\etfsboot.com C:\winpe_amd64\ISO C:\winpe_amd64\winpe_amd64.iso
    Burn the resulting ISO to a CD.

  • Windows 2008 Server Std on T500

    Hi. Is there anyway to install Windows 2008 Server Std. on a T500 with Windows 7 installed? We've tried to install it and the drivers are all screwed up -- the network, video, and other "base" drivers are all missing. We tried using the Vista and XP ethernet adapter drivers and it wouldn't take them.
    Has anyone done this successfully? Any instructions anywhere? Thanks.

    Hi Gerem..
    please, have you resolved your problem, ?  ru still using 2008 R2 ?
    I need soem suggestion and help, iam planing to buy New 15" MBP non retina 2012 model,
    i want to install 64-bit 2008 R2 as i have some Active directory DNS setup,
    will it support to install via boot camp,
    can we install with out bootcamp ? i mean Directly by partition the HDD ?
    i dont want to use R2 in mac osx by parllels or Vmware !!
    i amt to use full my Hardware 16GB and Quadcore,
    can you guide me how to avhive me Thanks a lot !!

  • Windows 2008 Server R2 not loading Desktop

    Hi All,
    I have windows 2008 server R2 using as Database server.Today when i try to login it is showing two more user accounts in the login screen and i login to the server with administrator account but it was showing a blue screen(not blue screen error) with mouse
    pointer.I press Ctrl+Alt+Del and open task manager>new task>desktop and click open its showing that "windows cannot access the specified device,path or file.You may not have the appropriate permissions to acess the item.

    From cmd.exe session run SET then look for
    USERNAME=Administrator
    USERPROFILE=C:\Users\administrator
    If you see USERPROFILE=C:\Users\administrator.000 (or similar) then the original local administrator profile was corrupt or otherwise orphaned.
    In days past one could create a new account with local administrative rights, logon with new account, then after saving off docs, etc. from corrupt/abandoned profiles use
    Control Panel|Users and Passwords and delete the old profile stores. Then when you next logon a new profile is created from an image in
    \default user Have not tried this on anything newer vintage than server 2003 though.
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Windows 2008 Server R2 & SAP Business One

    Does anyone have any experience, good or bad, with SAP Business One and Terminal Service on Windows 2008 Server R2?  We are finding a number of issues with this configuration and we are looking for any feedback that is out there.
    Here is the situation - our customer is running SAP Business One v2007 SP01 PL09 Hotfix4 on a Windows 2008 Server R2 machine.  All users (15 max) access SBO via Terminal Service to this machine, which also holds the databases (SQL Server 2005).  The machine currently has 20GB of RAM.
    What we are finding is:
    1) When any process related to SBO (SBO core or add-ons) consumes some portion of memory, none of that memory is ever released back to the O/S until SBO is completely closed.  So over the course of a day each user ends up simply consuming more and more memory as forms are opened for transactions.  While we do see this in Windows 2003 Server to some extent, at least some memory is released when a given form is closed.
    2) Once the system hits a point where around 75% of RAM is consumed the users start seeing application "hangs" and are forced to manually terminate SBO (via Task Manager) and restart.  There doesn't seem to be any paging or use of virtual memory (if my terms are right) in use.
    3) If the system is busy and a new window/form is opened the new window immediately (within one or two seconds) presents the "Not Responding" message on the new window.  Depending on the circumstances the application is simply waiting for resources and will continue opening normally.
    I would appreciate feedback from anyone who has experience with Windows 2008 Server R2; and especially using it for Terminal Services.  My personal feeling is that it is a platform that should be avoided but we would certainly like to hear what other folks have to say.
    Regards,
    Ross Unger
    Third Wave Business Systems

    I believe the supporting of this OS is still on Planned basis.  You may check with SAP support to give them a good user case to fight with any non-compatible issues.
    Thanks,
    Gordon

Maybe you are looking for