Using 10.4.11 on Intel Mac

I have a 44" printer that needs 10.4.11 max as the boys at Epson won't upgrade driver. Can I put OS 10.4.11 on a partition and run the printer from that or do I have to resort to using my old G4? Would Rosetta help in this situation? Any workarounds would be appreciated.

The printer is an Epson 10000 archival ink.
I can print from my G4 running Tiger, except my colour are off to my iMac and CS4. I have used Colormunki to calibrate all but it doesn't print close enough to my files. I am printing Grey machinery and as allot of us know grey is a hard colour to replicate. Alway a color cast.
I was successfull with this type of work in the past and with the G4.
I loaded the Gutenprint driver last week. It worked printing the Munki test strip then when I tried to print the file The printer gave me the message:
-"PrintJobMgr" stopped unexpectedly with status 106-
On the internet I found this to be a very rare and old code failure so I quit trying after awhile.
The Epson was bought new, used only for large prints and hasn't given me any problems. It may be old but it's a shame Epson wants me to trash it. Will never by Epson again.
Thanks for your help. Any more ideas would be appreciated.

Similar Messages

Can I use a Power PC non intel Mac Mini as an external HD with my iMac 3.06

Can I use a Power PC non intel Mac Mini as an external HD with my iMac 3.06 Intel Core Duo
I can't figure out how to get this to work. Is it possible?

WildBull wrote:
Will it work if I connect via usb instead of firewire?
No. There is no "USB Target Disk Mode".
Just so we're clear, when you start your Mac mini in FireWire Target Disk Mode (TDM - holding T on startup), do you see a FireWire icon on the Mac mini's display? IIRC, it's not required that the Mac mini be connected to a display for TDM, but it would help diagnose whether or not the mini is actually starting in this mode.

Running Autodesk Inventor using Fusion or Parallel on Intel Mac

I need to be able to run Autodesk Inventor and DO NOT want to purchase a PC to do it. If I use VMware Fusion or Parallel on an Intel Mac will it operate without any glitches. Our tech guy said that the keyboard shortcuts are not going to be the same, is that true and are there any other issues I will come up against (i.e. system speed, ram, video card etc.)

Hi and welcome to Discussions,
your signature says that you are using PPC-Macs (Power Mac; Powerbook).
Parallels and Fusion only work on Intel-Macs.
Same for BootCamp.
So, if your sig is still uptodate, you are out of luck.
Your tech guy might refer to the fact, that Apples keyboards have a slightly different layout than the usual PC keyboard.
See here for a comparison: http://docs.info.apple.com/article.html?artnum=304270
On Intel-Macs some guys round here and in the BootCamp Forum have reported success in running Autodesk software on their Intel-Macs.
Please do a search for these threads.
Regards
Stefan

Using MacBook backup with non-Intel Mac laptop

I'm scheduled for a computer replacement at work (not a new one, but a hand-me-down from someone else). I was originally told it would have to be a Windows PC (grrr), but then it turned out that someone who recently left for another job had a Mac laptop that I can have instead. I'm not sure exactly what model it is, but it's my understanding that it's only a year or two old. I assume it will be an iBook or a PowerBook.
I'm wondering if I can use my MacBook backup (which is on an external harddrive and is bootable) to boot up a non-Intel Mac laptop. Since I have to send my MacBook back in for repair (second round of RSD), I was hoping that once I get this older laptop I could just boot from my external and keep on working as if I still had my MacBook (without the ability to use Windows of course). I assume all the programs (except Parallels) would be compatible, but would the system files work?

I don't think it will allowed you to boot from that external that installed with os X 10.4.x (compiled for macintel version).
But surely you can use the data in it if you have proper or similar program at the older portable mac.
But if you willing to try it, it won't hurt, just connect that external and restart while pressing the option key, and if it shows as an option for start up, click on it and see how it goes. If nothing happen, simply shutdown the laptop and restart regularly using its own hd.
Good Luck.

Using MediaCentral on a non-intel Mac Mini - Remote options

Good evening.
I'm interested in installing MediaCentral by Equinux on my mini. I would like to integrate it with my Home Theater setup. Are there any type of possible bluetooth remote options for this that would let me get my mini integrated into my home theater?
Thanks.

The MediaCentral website lists "compatible remotes". Seems like a good place to start.
http://www.equinux.com/us/products/mediacentral/compatibility.html
Dual 1.2 G4/Intel Mini Dual Core Mac OS X (10.4.6)

Using isight in windows on intel mac

hi everybody, just wondering if i buy a macbook or macbook pro and open windows on it, can i use the isight built-in camera to video chat with someone using a pc on skype?? thanks (hope this question isn't too confusing!)

Hi Bronnus,
The answer is in this Apple Doc.
http://docs.info.apple.com/article.html?artnum=303572
1:41 PM Monday; May 22, 2006

TUTORIAL: How to make PPC Plug-Ins work on Intel Macs!

Hi guys, I wanted to share this brillant method with you all, collect ideas and create a list of Plug-Ins, you have succeeded to make work (I guess nearly all PPc Plugs will work this way but lets better stick to facts). Maybe there is a way to work with more than 1 Plug - Feel free to report and contribute! Kudos goes to a dear friend of mine... Let' share some power...
"I noticed some people complaining about not being able to use Trilogy and Atmosphere on Intel Macs. There's a tricky way to do it that takes about ten minutes to set up the first time and after that is easy. It probably works for other PPC-only instruments as well.
Here's the outline: OSX for Intel contains a layer called Rosetta, which runs PPC software that hasn't been updated. (You might run Microsoft Word via Rosetta and not even know it.) In general, Rosetta is no good for audio software: you can't use it for a sequencer or a recording application. But it's good enough for a lightweight plugin host like Rax, which does nothing but serve as a host for Atmosphere. So you can load Atmosphere into Rax via Rosetta, then run it alongside a UB sequencer like Live or Logic.
The only tricky part is connecting the two together. You need to get MIDI out of your sequencer and into Rax, and you need to get audio out of Rax and back into the sequencer. The MIDI can go via an internal IAC bus. The audio can go via the handy freeware audio-routing utility Soundflower.
Here's how to set up:
-- download Rax version 1.2.3. (Version 2 and up won't work.) You can find it at http://macmusic.org/software/view.php?id=395 . Use the serial in SerialBox to install.
-- download and install Soundflower from http://www.cycling74.com/downloads/soundflower
-- in Audio MIDI Setup, create a new IAC bus. Instructions on how to do this are at http://www.spectrasonics.net/news/Creating-an-IAC-Bus.html . Name it Rhino. (You can name it whatever you want, but in these instructions I'm going to call it Rhino.)
Now you're ready to go.
-- Open your sequencer and create a MIDI track and an audio track. Set the MIDI track's output to Rhino. Set the audio track's input to Soundflower 2ch.
-- Open Rax and load Atmosphere. In the Preferences, go to the Audio tab and set Audio Device to Soundflower 2ch. Now go to the MIDI tab and, under MIDI Inputs, make sure Rhino is the only thing checked.
You should now be able to send MIDI from your sequencer to Atmosphere, and then hear the audio through the sequencer. One last stage is to sync Atmosphere to your sequencer's MIDI clock, so that tempo-synched effects will work properly.
-- Still in Rax Preferences, on the MIDI tab, set the MIDI Clock dropdown menu to Rhino. Close the Preferences window. At the top of the main Rax window, make sure the Ext. Sync box is checked. The Tempo window should say 0, which means Rax is following the sequencer's master tempo.
And you're done. Save the Rax document and you can open Atmosphere with a single click. Trilogy works the exact same way, obviously.
If you want to use multiple instruments from Rax, you'll need to use SoundFlower 16ch and send MIDI on a different MIDI channel for each instrument (using the same IAC bus).
Anyone who's tried this, please post your results in this thread. Especially, try out other PPC instruments, and try using multiple instruments at the same time, and let us know how it works for you."
Maybe one of the Admins wants to sticky this
With my very best,
Vic.

There's another shortcut I've used successfully in order to access 'old' PlugIns on an Intel MBP :
Just use Logic 6 - and take full advantage o' that ole rotatin' rosetta
Meaning : Other than with native Logic versions 7 and 8, Logic 6 has to be fully emulated by the rosetta engine, and if your intel mac is fast enough, it does so very well - thus including all PPC PlugIns you still may have installed. Also works fine for PlugIns that were converted via FXpansion's VST-AU manager.

Myst V on intel macs

Does anyone have info on using Myst V on the intel macs, specifically macbook pros? I am seriously dissappointed this is not compatible out of the box. Apparently there is a way to get around the install issues, I just haven't figured it out yet.

Thanks for that suggestion. Just to save people the trouble of finding it in that forum, here's the link to some instgructions for installing Myst V:
http://tech.rufy.com/articles/2006/03/04/guide-to-installing-myst-v-on-mac-os-x- intel
This is pretty technical, requiring using the Terminal.

Cubase SX4 on Intel Mac

Hi
I just wondered if anyone has started using Cubase SX4 on an Intel Mac?
I can't get any of the plugins I used in SX3 to even show up in SX4. I have seached the Cubase forums and tried all kinds of possible fixes to no avail. eg remove blacklist, select path in plugin info,fix privs etc. To no avail. Any ideas?
Also I would like anyone to use this thread to talk about anything related to Cubase on Intel Macs. Except the boring old vs Logic stuff.
Cheers All!
Gor

Hi Andy
They are all VST PPC. The one Universal plugin I have loads ok.
I just read your thread on the cubase forum. Just for the record I am running SX 4 on an Intel Mini1.66. I posted here as I thought most Cubase users would be using Macpro.
In contrast to the Pro, When SX4 is started up on the mini the cpu use is only 2 clicks on the performance meter about 5%. With 4 universal plugins playing ( the ones included in SX4) the cpu useage is about 35%. With plugs turned off 10%
In SX3 startup cpu is more like 20% and I can use only three instruments. Coure this is all down to Rosetta which I thing does a pretty good job under that load.
I hoped that I could run the host in Universal use universal plugs as much as possible and the odd PPc plug where ness thereby getting more options.
I was thinking about getting a Macpro and running SX3 hoping the shear brute force of all those cpus even under Rosetta would be pretty awesome.
Did you ever try SX3 on the Macpro?
Cheers!
Gordon

I have OSX 10.5.7 on my Intel Mac. When I try to login using the correct password the screen goes white and just returns back to the login screen. It does not jiggle like when you enter the wrong password.

I have had a number of issues with my Intel Mac recently and had to reboot using disk utilities, safe mode, OSX recovery, but always come back to the login screen but when I type my password the screen goes white and returns to the login screen. My password is correct and the login does not jiggle as it would if the password was wrong. Please advise,

Back up all data if you haven’t already done so. There are ways to back up, even if you can’t log in. Before proceeding,you must be sure you can restore everything to the state it’s in now. If you’re not sure you can do that, STOP.
The procedure below may spare you the need for a clean reinstallation of OS X. If you don't feel comfortable carrying it out, don't. try.
Briefly, you need to delete the following file:
/var/audit/current
If you already know how to do that, you can skip the rest of this message. Do it, and try again to log in.
Boot in single-user mode by holding down the key combination command-S at the startup chime. If you’re using an external USB keyboard, it must be plugged directly into a built-in port on the Mac, not into a hub. Release the keys when you see a black screen with scrolling white text. In this mode, there’s no graphical interface; just a command line. Initially, you can’t make any changes to files.
When the text stops scrolling, and you see a line ending in a pound sign (“#”), type the following command:
mount -uw /
You must type the command exactly as given, with no mistakes. If you don’t feel able to do that, STOP. At this stage, no harm will be done if you make a mistake, but later, it will be. Press the return key.
Next, type the following command:
rm -i /var/audit/current
Press return. You should get the following output:
remove /var/audit/current?
If that's not what you get, STOP. Type the single letter N, press return, and try again. Otherwise, type the single letter Y and pressreturn.
Finally, enter the command:
exit
Press return. The text will start scrolling again, and then the system will reboot. Try again to log in.
Credit for this solution to ASC user AnthonyTW.

Can I use OS9 as the start up disk on my Intel Mac?

I have a new Intel iMac. I want to partition my hard drive, install OS9 and run the old system. I know I can't use "classic" on 10.4.7 but I wonder if I could simply install OS9 and reboot my computer. I don't need to move between the two, meaning I don't need to work in OS9 then instantly click and be in 10.4.7. I can deal with the inconvenience of rebooting.
I'm having 3 problems
#1, I have an old version of Photoshop. I'll buy the newest Photoshop someday but the latest version wasn't made for Intel Macs and it is very expensive. $600. I wonder if it runs slow on Intel Macs. Maybe I should wait for the next version.
#2 I have a great Epson printer (875 DC) but Epson has not updated the print drivers for this model and probably won't. OK fine I can buy a newer better photo printer $550.
#3 I have a "Nikon Coolscan 4000" film Scanner $1,300. This scanner is great in OS9 but the thing never worked in OS10 and now that I have this Intel iMac I downloaded the latest software update and the thing still doesn’t work and if the computer sleeps while the Nikon software is open it won't wake up and I have to restart.
To sum everything up, can I run OS9 on my Intel iMac? I don't care if I have to work in OS9 then shut down and restart to work in 10.4.7 Can this Intel iMac understand OS9. If I try to restart using OS9 as the startup disk will I damage the computer? Will I screw things up and have to spend hours and days removing files and correcting problems?
I feel like this computer is a fresh clean new baby and I'm afraid that if I start messing around with it I'll regret it.

Hello,
I have a new Intel iMac. I want to partition my hard
drive, install OS9 and run the old system. I know I
can't use "classic" on 10.4.7 but I wonder if I could
simply install OS9 and reboot my computer.
The problem here, is that the OS 9 environment / Operating System will only run on a PowerPC processor.
The only reason that OS X will run on either processor, is that it was specifically designed to do so from the beginning.
But, OS 9 and older were specifically written for the PowerPC / Motorola processors.
So, you will need a machine with a PowerPC processor to run OS 9.
Currently, there is one program that will enable OS 9 to run on an Intel Mac. But, it requires making a copy of the Power Macintosh ROM. So, it's legal use is questionable at best.
http://www.gibix.net/projects/sheepshaver/
This program works by emulating the PowerPC processor. And, it is reported to operate at roughly 1/8-th of native speeds. So, it could be pretty slow for productive photo work.
#1, I have an old version of Photoshop. I'll buy the
newest Photoshop someday but the latest version
wasn't made for Intel Macs and it is very expensive.
$600. I wonder if it runs slow on Intel Macs. Maybe I
should wait for the next version.
If it is a Mac OS X version, then it will run on the Intel systems. But, yes it will be slower. Usable, but slower.
I haven't tried this program, so I cannot personally comment on it. But, even Steve Jobs admitted it was slow on the Intel Macs.
#2 I have a great Epson printer (875 DC) but Epson
has not updated the print drivers for this model and
probably won't. OK fine I can buy a newer better
photo printer $550.
OS X comes with drivers for the Epson Stylus Photo 875. They are provided by the Gimp-Print layer. But, installed / select just like any other printer. So, as long as you can connect the printer using USB, then you can select the driver for the 875 and be fine (as long as this is the same printer).
Otherwise, some people have reportedly installed PowerPC print drivers without trouble. I haven't tried it myself.
#3 I have a "Nikon Coolscan 4000" film Scanner
$1,300. This scanner is great in OS9 but the thing
never worked in OS10 and now that I have this Intel
iMac I downloaded the latest software update and the
thing still doesn’t work and if the computer sleeps
while the Nikon software is open it won't wake up and
I have to restart.
Can't really help you there.
To sum everything up, can I run OS9 on my Intel iMac?
I don't care if I have to work in OS9 then shut down
and restart to work in 10.4.7 Can this Intel iMac
understand OS9. If I try to restart using OS9 as the
startup disk will I damage the computer? Will I screw
things up and have to spend hours and days removing
files and correcting problems?
As mentioned above, the only method currently available to use OS 9 on an Intel system is that SheepShaver program.
But, I would not expect good results with it for your uses. And, it's legal status would be questionable since you need to copy a ROM file from another Mac to use it (which goes against Apple's license agreement).
I feel like this computer is a fresh clean new baby
and I'm afraid that if I start messing around with it
I'll regret it.
Just make sure you have a good backup of everything before you start experimenting.
I hope this helps.

Using External Boot Drive with New Intel Mac Mini

I have a 1st Gen MacMini and use an external 7200 RPM Lacie drive as the system boot drive along with all the applications.
If I were to purchase a new Intel Mac Mini, is it possible to use the current external drive as the system drive or is there some conversion steps that would be necessary ?
Thank you.

You can use the hardware, but will have to repartition and reinstall the OS from the disk shipped with the new Mac Mini.
http://docs.info.apple.com/article.html?artnum=303220
If you create a disk image of the Lacie on your Mini, you can later use setup assistant to restore users and applications from that image.

I have moved from a G5 Powermac to an Intel Mac Pro and am porting over Items from a Backup HDD. How can I access and use drawings and documents created on the PC computer on the Intel computer ?

I have moved from a G5 Powermac to an Intel Mac Pro and selectively porting over items from a backup hard drive.
How can I access and use documents and drawings created on the PC based computer ?

Clarisworks, you need Appleworks, which will only work with Mac OS X10.6.8 or earlier. See this tip if you must go newer. Mac Pros with newer hardware configuration than July 20, 2011 can't use Mac OS X 10.6.8 or earlier without this tip and then it would be Mac OS X Server. I'm not sure if the new black Mac Pro supports that configuration or not.
iPhoto, there is an iPhoto for all versions of Mac OS X.
iTunes, there is an iTunes for all versions of Mac OS X. Note with iTunes versions 11 and later, which are needed for syncing with iOS 7 or or later, you will lose coverflow, if you liked that feature. Sadly you can't run an older version of iTunes from within Mac OS X 10.9 or later.
Sketchup: http://help.sketchup.com/en/article/60107 shows the versions that will work with intermediate Mac OS X versions, and this shows the latest version: http://help.sketchup.com/en/article/36208 be sure to click on the operating system you choose to use.
GIF - Viewing GIFs Apple's Preview can do that. Editing them, I like http://www.lemkesoft.com/ Graphicconverter.
DMG is able to be opened by all versions of Mac OS X. This are just "disk images" which store programs on a virtual disk that will open when double clicked. Frequently you'll find the installer of the said program inside. To find out if the program itself is compatible with 10.7 through 10.9, see http://www.roaringapps.com/
Otherwise see the resources on:
https://discussions.apple.com/docs/DOC-2455
If you end up deciding to stick with Snow Leopard.

Using two displays simultaneously on an early intel mac mini

I would like to connect my Apple display and an LCD TV to my early Intel Mac Mini using a DVI-D splitter and DVI-D cable to the DVI input on the TV. I don't know if this Mac Mini's video card has a single or a duel DVI output. I'm assuming it has to have a duel output to be able to have both displays on at the same time. Also, from what I've read previously in the discussions, I assume I'll have hook up the audio output also, assuming the video works. Thanks for any help.

I'm pretty sure that can't work for a variety of reasons. Primarily the DVI output on the mini has a single digital output, not two. It has been shown that it can output VGA analog and DVI digital simultaneously when booted under Windows, but the OS X driver for the GMA950 does not support that same trick. So I don't think you are going to be able to do what you want unless you run Windows.
You could try add-on hardware if you really have your mind set on this. There are USB-to-video adapters out there on the market. They are reported to work pretty well with the caveat that they can't be used for things like full screen video which requires more bandwidth than USB can supply. But for a mostly static display, like using a mail reader or a browser without too much animation, or a spreadsheet, etc., they work well enough.

What 32inch plus tv to buy in the UK to use with new intel Mac mini

As the title - What 32inch plus tv to buy in the UK to use with 1.83 intel Mac mini. It does not have to have freeview as I will be using tubestick. I do want to use the hdmi connection. Who's got a great setup, with no issues - model numbers appreciated £1200 ish budget

So everything is working normal except for screen saver? Hmm. That's odd. Perhaps your settings are such that shortly after the screen saver kicks in the mini is also set to go to sleep. That would cause the screen to lose sync and give the "no signal" message. Check your Energy Saver against the Screen Saver settings and adjust the sleep interval if need be.
FYI, running a screen saver on an LCD TV is not a good idea long term. An LCD uses a lamp as a backlight, and the lamp has a finite lifetime. Consuming it's limited hours of life by running a screen saver all the time (like overnight, everynight) will shorten considerably the service life of your TV.

Using 10.4.11 on Intel Mac

Similar Messages

Maybe you are looking for