Using 100% disk

hi , i have some problem most of the time when i turn my laptop on
when i turn my laptop on , it is really slow and when i see the processes in the task manager i see that the use of disk is 100% 
and the processes that use disk alot are 'service host:local service...'  and 'anti malware service executable'
i search but i did n`t find anything helpfull
if i hibernate my laptop instead of shot it down, the speed is better but i still have this problem 
and some time that i run some heavy software it`s happend again

Hello @faezeh 
Thank you for posting on the HP Forums.
To get your issue more exposure I would suggest posting it in the commercial forums since the ProBook 450 G1 is a commercial product. You can do this here: Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE
The support page for your product may be helpful in the meantime: HP ProBook 450 G1 Notebook PC
I hope this helps!
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Similar Messages

  • 100% disk usage in Task Manager when using Photoshop CC (Windows 8.1 - 64 bit)

    Hi
    I have been using Adobe CC for a month or two now. I own an Asus laptop with Intel i7 (2.4 GHz), 6 GB RAM, 1 TB hard disk space and 64 bit, nearly 6 months old. Following apps are currently installed: Photoshop, Illustrator, InDesign, Audition, Acrobat XI Pro, Premiere Pro and Media Encoder. I recently performed an update through Adobe CC for Photoshop and Illustrator, all others are up-to-date.
    I believe, but I may be wrong, that since this update Photoshop is acting weird on my laptop. When I start Photoshop, my task manager immediately indicates a 100% rate of my disk usage. This seems to wield off after it is fully operational, but when I start to edit a file, the disk usage immediately jumps back to 100%, while the CPU remains below 10%, RAM stays at 3.5-3.8 GB (only 60% of total capacity) and even the actual read and write speeds of my HDD are not particularly high (5 - 10MB max). And because of the 100% disk usage, Photoshop freezes in an instant and operating it is nearly impossible.
    I already uninstalled Photoshop, went over all services and **** that could trigger this within Windows 8.1 (Google-search for: Windows 8.1 disk usage 100%) , re-installed Photoshop and I still have the same problem.
    So, I was wondering if there might be a solution to this problem or if anybody else is having this problem as well?
    Thanks in advance!
    UPDATE: This error applies only when I try to manipulate, add, edit or remove text. All other functions (not related to text) seem to work properly.

    No, I don't know much about that, but I found a couple links for you..
    "service host: Local system (network restricted)(11)" eating virtual memory
    http://www.reddit.com/r/techsupport/comments/1b496x/windows_8_high_disk_usage_usually_arou nd_100_and/

  • 815M Pro (MS-6334) - how to use ATA/100 disk?

    Western Digital website FAQ states:
    "Q:I don't have a system that supports Ultra ATA/100, can I run the Ultra ATA/100 HDD in it?
     A:Yes, the HDD will not run in UATA/100 mode but instead is a slower compatible
    mode such as Ultra ATA/66, Ultra ATA/33 (33.3 MB/s), DMA Mode 2 (16.6 MB/s)
    or PIO Mode 4 (16.6 MB/s)."
    The MSI 815M Pro supports ATA/66.
    Pentium III 800EB with Award BIOS W6334MS v1.3 042501 16:24:02
    I have a Fujitsu MPG3102AT 10248MB ATA/66 disk being used successfully as Primary Master (no Primary slave).
    CD-RW as Secondary Master (no Secondary slave).
    I've tried to replace the Fujitsu with a Western Digital WD400BB 40GB EIDE (Ultra ATA/100) disk but when I power on the BIOS starts the memory test but machine powers off after a few seconds.
    I can't find any BIOS setting which helps.
    Can anyone advise how to get this disk to work?
    Thanks

    Quote from: Fredrik Åsenius on 10-September-06, 08:49:52
    You mean, that it is during detection of ATA-devices computer powers off? If that should happen, I would never use a WD disk on this system. Halting is one thing, but powering off like that is unknown to me. Seems dangerous, if it is true.
    yep its possible, can personaly confirm it.
    "I would never use a WD disk on this system"
    well dont worry about that, that happends with old WD HDD's only. WD is still TOP brand. like you probably know good brands has bad times sometimes, like IBM before they was buyed by HITACHI( 1st revision of IBM Desktar series). Quantum(Maxtor at thease days) has pretty malfuction series also like 1st SE series, MAXTOR with flat series lots of defective also, Seagate also with 7200.7 2nd revision IDE 80GB models lots of defectives(43 of them caput for 3 moutns personally happend to object where im support still remember numbers.....) and so on... every brand has their bad moments.
    Quote from: tachyon42 on 10-September-06, 11:22:09
    I have a 250W PSU and don't believe that just replacing the Fujitsu by the Western Digital drive could cause a power problem. I just have a floppy, HDD, CD-RW and a PCI graphics card on the motherboard.
    The system works fine with the Fujitsu drive.
    The Western Digital drive is not faulty - it works fine in another machine.
    I'm inclined to go with the theory about ATA66 - hope someone can provide the Ultra ATA Management utility!
    Any further ideas are very welcome.
    yep im thinking the same thats why didnt recommend others i also didnt think PSU overload with WD instead Fudjitsu... gona search alile for this util(its pretty old)
    i can be found in this pack for now:
    http://www.pc-facile.com/download/recupero_eliminazione_dati/ultimate_boot_cd/
    Hard Disk Diagnosis:
    Drive Fitness Test (IBM/Hitachi) 4.05
    PowerMax (Maxtor/Quantum) 4.09/4.22
    SCSIMax (Maxtor) 2.1
    DLG Diagnostic (Western Digital) 4.15/5.04c -> Diagnostic one
    Data LifeGuard (Western Digital) 11.0         -> Diagnostic one
    SeaTools Desktop (Seagate) 1.06.02/3.02.03en
    Diagnostic Tool (Fujitsu) 6.30
    SHDIAG (Samsung) 1.25
    HUTIL (Samsung) 2.00
    GWSCAN (Gateway) 3.15
    GWSCAN (Gateway) 5.09
    Salvation HDD Scan and Repair 3.0
    MHDD32 4.2
    ExcelStor's ESTest 3.70
    Hard Disk Device Management:
    Feature Tool (IBM/Hitachi) 2.00
    AMSET (Maxtor) 4.00
    MAXLLF (Maxtor) 1.1
    UATA100 (Seagate) 3.06
    Ultra ATA Manager (Western Digital) June, 2003 ---> Thats which we are looking for.
    SMARTUDM 2.00
    ATA Password Tool 1.1
    ATAINF 1.3m
    ExcelStor's SATA Tool 1.10
    Quote from: Stu on 11-September-06, 04:13:47
    random instant unexpected power offs are caused by either an overheating CPU or an overloaded PSU
    yep in most of cases yes, but dont think PSU overload can be coused by replacing Fudjitsu HDD with WD HDD.
    he also dont have "random" shutoff" his shutdown is always at same place when HDD is began detected(not random).
    about overheating CPU also cant be.. CPU is at full load at post??? and overheating but this happend only with WD HDD and PC shutdown?(dont think so) dont forgot all is alright with other HDD Fudjitsu HDD. if it is CPU heating or PSU should happend with other HDD(Fudjitsu) also not only with WD HDD.

  • Windows 8.1 100% Disk Usage Problem

    I am running a Toshiba Satellite C855D-S5110. 12 GB Ram, 456 GB HD with 311 GB free, CPU Max speed 2.7 GH. My computer, as many other
    W8 and W8.1 users seem to suffer, is nearly constantly at 100% disk usage (apparently
    I have seen many claims as to what causes this; some even say it involves a bad HD. However, I do not think my HD is bad because
    1. My HD was fine before I got 8.1, to the best of my knowledge ( was on 8 prior to 8.1)
    2. Most importantly, when my computer isn't in the 100% phases, it seems to work absolutely fine!
    I would like help in figuring out what to do about this problem, as well as why it occurs and why it works the way it does (i.e. seemingly just going away for long periods of time).
    It is extremely difficult to work when my computer is being very slow, and not knowing when it will happen or what makes it stop happening is frustrating.
    I will provide below a list of measures I have taken, edited to include new things tried.
    1. Adding RAM
    2. Increasing pagefile
    3. Running programs to clean up clutter, fix registry problems, free up memory, etc (specifically, Iolo System Mechanic)
    4. Disabling the Windows Search Indexing service
    5. Checking for updates
    6. Running Microsoft Security Scanner (it found nothing)
    7. Disabling Live Tiles (of which I only had one in the first place!)
    8. One person claimed that their problem went away when they ran Skype, of all things. I tried this, though it did not do the trick.
    9. Booting in Safe Mode.
    10. Clean Boot.
    11. My drive is 0% fragmented.
    12. Trying to repair the Windows Image does nothing, as it comes up as being healthy when scanned.
    13. sfc /scannow did not fix the problem either.
    14. Running Microsoft's performance scanner and uploading the .etl file got me a reply blaming Chrome, which is impossible because
    the problem occurs with no programs running. I will try another recording and put it up; the link will be edited in.
    https://skydrive.live.com/redir?resid=DD4BA6A3F312AE94!945&authkey=!APrxfxQeNw14igc&ithint=file%2c.etl

    Having the exact same problem on a computer after the Windows update installed from 8.0 to 8.1. 
    Even after reloading the computer  from scratch.
    The drive activity goes WAY up when booting  - to 100%.  It then seems to calm down but randomly will go up and down throughout the day peaking at 100%. Even when nothing is open except a MSWord page into which  I am typing.
    If other programs are open such as Excel and/or Internet Explorer they will display the file name at the top as usual with (Not Responding) at the end. The screen will fade to an opaque look. This lasts for up to approx. 15 minutes at times and the computer
    responds to no keyboard or mouse clicks. The mouse pointer on the screen still moves but nothing happens when I click on anything.
    I managed to keep the Task Manager visible and it clearly shows less than 20% memory use and less than 5% CPU use when this occurs. But the HDD is at 100%.
    The fact that it was fine prior to updating to 8.1 indicates an issue with 8.1 to me. Absolutely nothing else has changed on this machine - aside from Windows Update.
    This is a know fault and I hate W8.1. Once it finishes whatever it is doing then there are a bunch of screen flashes as it catches up to what ever and where ever I had clicked with the mouse while it was frozen. It is like it is catching up because W8.1
    is causing the HDD to ???????????
    Another issue I encounter is the stupid Automatic Maintenance that cannot be disabled. I have found nothing to accomplish this that actually works no matter what anyone has posted on MS sites. It last rendered my computer today useless for approx. +1
    hour today!!! I had been using the computer and it was never idle for more than 1 or 2 minutes but yet it started. It is set to run at 1:00 am but it was only approx. 5:00 pm.!!
    The Automatic Maintenance is not running however, when the computer freezes and uses 100% HDD as indicated by Task Manager.
    Also I can disconnect the computer from the modem or power off the modem and the HDD remains at 100%! So it is not sending nor receiving anything at that time.

  • Ntoskrnl.exe 100% disk usage windows 8.0 and 8.1

    This is a bug report. I hope Microsoft will take it seriously as it took me a whole day and much stress to track it down. Basically my problem was the same as this: http://slopjong.de/2013/04/23/extremely-high-disk-activity-with-windows-8-and-how-to-fix-it/
    However in the graphic on this site it appears to show that Virtualbox is the culprit. However this is unlikely to be the case, as the author of the site fixed his problem by following his own advice. This is an extremely common problem as this Google search
    indicates:
    https://www.google.co.uk/#q=ntoskrnl.exe+100+disk+usage+windows+8
    To attempt to address my own problem first I disabled all non-microsoft services in Windows 8.1 professional. When this had no effect on the problem, I then disabled all non-essential Microsoft services. In turn. when this has no effect I disabled all user
    installed start-up items. Again when this failed to have an impact, I changed my browser from Firefox to Google Chrome, as I noted that the extremely high disk utilisation was at it's worst when using Firefox. This also had no effect.
    I then tried a variation of my search on Google "ntoskrnl.exe 100 disk usage windows 8" (I can't remember the exact variation) and stumbled over the above site at the beginning of this message. I had by that point tried everything that was in my power
    to try. But I noted from this article that the author recommended changing the power plan from 'balanced', to 'high performance'. Since I had   exhausted every other avenue, I decided to try this and like magic, instantly it worked. So there is clearly
    a bug in Windows 8.1 (and 8 prior to this) that causes 100% disk utilisation. I thought someone at MS might like to know about it and come up with a way to fix it.
    Below is my system configuration. Please note this system configuration may contain a number of errors, as it was generated with several non-essential Microsoft services disabled. I do not believe these issues need to be addressed. However the issue of 100%
    disk utilisation when using a 'balanced' power plan on Windows 8.1 (and 8.0) almost certainly does.
    PS
    This message board system will not allow me to post my full system configuration. MS need a better bug reporting system! Apple allow the public to submit bug reports, so why not Microsoft too. The public can find useful bugs!

    Hi,
    Thanks for your detailed description.
    We considered that the culprit for every computer is different. For the specific PC, we need to analyze the specific issue.
    Please trace the performance using the Windows performance toolkit.
    http://msdn.microsoft.com/en-us/library/hh162945.aspx
    The download link is below:
    http://www.microsoft.com/en-US/download/details.aspx?id=39982
    Then upload the .etl file to Skydrive. We will help you analyze.
    Karen Hu
    TechNet Community Support

  • Windows 8.0 ntoskernel has producing 100% disk usage

    hello i am also having the %100 disk usage problem and am starting a thread to upload my etl. file and
    see if i can get a solution. thnx. i should also mention i have tried every suggestion i have read on the internet even ones that worked for other people did not work for me i.e. (switching to high performance power plan, disabling cd drive, etc.) no matter
    what i try "system" is always utilizing 90%-100% of my hard drive.
    the issue started with windows 7 Ent edition and I decided to reflash the drive Cof my  Laptop  HP Probook 6470B with windows 8.0 ENT 64 bits and has the
    same symptom ntoskrnl.exe is causing hiccups on I/O  and delays . The access to C on windows 8 compared h Windows 7 is better  but continue showing the issue. 
    Other peers on the same company not complaint of this delay but I'm sure that they have same symptom.
    the symptom is that the Ntoskernel read and write constantly  few bytes  for fractions of second but repeatedly, the effect is that  the queue disk
    is high and this issue no let to use the drive C, the system need to wait that the drive is free to let that other applications can use the drive SATA.
    I try to share my .etl collected with  windows performance analyzer ,  but "ONE drive" application no let my up more of 100MB in single
    file.
    If you can help provide some space to upload the file will be appreciated.
    Regards
    Luis Velazquez

    Hi  Wanikiya,
    Unfortunately I can´t remove the Mcafee sw due that is is a policy of my company.
    Checking the MS Performance tool you can see that the behavior that show the disk is caused not by Mcafee process. You can select only Process system (4) and right click and select  filter selection you can see that the output match exactly with the
    disk behavior.
    when you put the mouse and  click the top 100 % line of the graph you will see a message like this:
    Path name- c:\$logfile
    IO Init Stack -- [Root] /ntoskrnl.exe ? /ntoskernel.exe?/nto..../fvevol.sys!?/volmgr.sys!/partmagr.sys!?
    the Pathname change in each point of the graph but the IO Init stack remain the same.
    I'm afraid the the SATA drive is having an issue and windows try to fix.
    But if you found something more let me know.
    Let me tell you that I'm using bit locker encryption and all the data on my disk has been encrypted.
    Any idea will be welcome.

  • Debugfs using 100% cpu on boot for 10 minutes

    Hi,
    I've recently installed archlinux on my Thinkpad x230.
    I have arch and windows on my SSD which is /dev/sdb and I've got an HD for storing files at /dev/sda1 (ext4).
    I set it up with systemd in the beginning so I can't compare to what it was like when it was using init.
    I'm getting commands like:
    root      3524  0.0  0.0  21520  1112 ?        R    15:08   0:00 debugfs -R stat ./grub/i386-pc/newc.mod /dev/sda1
    root      3510 94.5  0.0  21520  1108 ?        R    15:08   0:01 debugfs -R stat ./grub/i386-pc/probe.mod /dev/sda1
    With various files running for about 10 minutes on boot and using 100% of my cpu.
    Seems to be related to the HD on /dev/sda1 as I don't believe I've seen any on /dev/sdb.
    I've looked around and I can't find anything about this.
    dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Linux version 3.5.5-1-ck (squishy@ease) (gcc version 4.7.1 20120721 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Oct 3 04:43:03 EDT 2012
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-ck root=UUID=4c34b9df-7887-464e-9a0a-9cf02d6d860f ro cryptdevice=/dev/disk/by-uuid/eaedae38-8ce8-4be8-8de4-9f5773746ca6:root:allow-discards elevator=bfq pcie_aspm=force i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000cec2ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cec30000-0x00000000dae9efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000df9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021e5fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000021e600000-0x000000021e7fffff] reserved
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.7 present.
    [ 0.000000] DMI: LENOVO 2306CTO/2306CTO, BIOS G2ET82WW (2.02 ) 09/11/2012
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x21e600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 080000000 mask FC0000000 write-back
    [ 0.000000] 3 base 0C0000000 mask FE0000000 write-back
    [ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable
    [ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable
    [ 0.000000] 6 base 100000000 mask F00000000 write-back
    [ 0.000000] 7 base 200000000 mask FE0000000 write-back
    [ 0.000000] 8 base 21F000000 mask FFF000000 uncachable
    [ 0.000000] 9 base 21E800000 mask FFF800000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xcec30 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0xcec2ffff]
    [ 0.000000] [mem 0x00000000-0xcebfffff] page 2M
    [ 0.000000] [mem 0xcec00000-0xcec2ffff] page 4k
    [ 0.000000] kernel direct mapping tables up to 0xcec2ffff @ [mem 0x1f984000-0x1fffffff]
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x21e5fffff]
    [ 0.000000] [mem 0x100000000-0x21e5fffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0x21e5fffff @ [mem 0xcec26000-0xcec2ffff]
    [ 0.000000] RAMDISK: [mem 0x37746000-0x37b9afff]
    [ 0.000000] ACPI: RSDP 00000000000f0120 00024 (v02 LENOVO)
    [ 0.000000] ACPI: XSDT 00000000daffe170 000C4 (v01 LENOVO TP-G2 00002020 PTL 00000002)
    [ 0.000000] ACPI: FACP 00000000dafe6000 0010C (v05 LENOVO TP-G2 00002020 PTL 00000002)
    [ 0.000000] ACPI: DSDT 00000000dafe8000 10E11 (v01 LENOVO TP-G2 00002020 INTL 20061109)
    [ 0.000000] ACPI: FACS 00000000daf5a000 00040
    [ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 LENOVO TP-G2 00002020 PTL 00000001)
    [ 0.000000] ACPI: TCPA 00000000daffc000 00032 (v02 PTL LENOVO 06040000 LNVO 00000001)
    [ 0.000000] ACPI: SSDT 00000000daffb000 00408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
    [ 0.000000] ACPI: SSDT 00000000daffa000 00033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
    [ 0.000000] ACPI: SSDT 00000000daff9000 007A8 (v01 LENOVO SataAhci 00001000 INTL 20061109)
    [ 0.000000] ACPI: HPET 00000000dafe4000 00038 (v01 LENOVO TP-G2 00002020 PTL 00000002)
    [ 0.000000] ACPI: APIC 00000000dafe3000 00098 (v01 LENOVO TP-G2 00002020 PTL 00000002)
    [ 0.000000] ACPI: MCFG 00000000dafe2000 0003C (v01 LENOVO TP-G2 00002020 PTL 00000002)
    [ 0.000000] ACPI: ECDT 00000000dafe1000 00052 (v01 LENOVO TP-G2 00002020 PTL 00000002)
    [ 0.000000] ACPI: FPDT 00000000dafe0000 00064 (v01 LENOVO TP-G2 00002020 PTL 00000002)
    [ 0.000000] ACPI: ASF! 00000000dafe7000 000A5 (v32 LENOVO TP-G2 00002020 PTL 00000002)
    [ 0.000000] ACPI: UEFI 00000000dafdf000 0003E (v01 LENOVO TP-G2 00002020 PTL 00000002)
    [ 0.000000] ACPI: UEFI 00000000dafde000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
    [ 0.000000] ACPI: POAT 00000000dafdd000 00055 (v03 LENOVO TP-G2 00002020 PTL 00000002)
    [ 0.000000] ACPI: SSDT 00000000dafdc000 00C79 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 00000000dafdb000 00A7E (v01 PmRef CpuPm 00003000 INTL 20061109)
    [ 0.000000] ACPI: DMAR 00000000dafda000 000B8 (v01 INTEL SNB 00000001 INTL 00000001)
    [ 0.000000] ACPI: UEFI 00000000dafd9000 002A6 (v01 LENOVO TP-G2 00002020 PTL 00000002)
    [ 0.000000] ACPI: DBG2 00000000dafd8000 000E9 (v00 LENOVO TP-G2 00002020 PTL 00000002)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216000000-ffff88021dbfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x21e5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x40003fff]
    [ 0.000000] node 0: [mem 0x40005000-0xcec2ffff]
    [ 0.000000] node 0: [mem 0x100000000-0x21e5fffff]
    [ 0.000000] On node 0 totalpages: 2019260
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 6 pages reserved
    [ 0.000000] DMA zone: 3911 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 825967 pages, LIFO batch:31
    [ 0.000000] Normal zone: 18328 pages used for memmap
    [ 0.000000] Normal zone: 1154664 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
    [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
    [ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
    [ 0.000000] PM: Registered nosave memory: 00000000cec30000 - 00000000dae9f000
    [ 0.000000] PM: Registered nosave memory: 00000000dae9f000 - 00000000daf9f000
    [ 0.000000] PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000
    [ 0.000000] PM: Registered nosave memory: 00000000dafff000 - 00000000dfa00000
    [ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
    [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
    [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
    [ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
    [ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
    [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
    [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
    [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88021e200000 s81088 r8192 d21312 u262144
    [ 0.000000] pcpu-alloc: s81088 r8192 d21312 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1984542
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-ck root=UUID=4c34b9df-7887-464e-9a0a-9cf02d6d860f ro cryptdevice=/dev/disk/by-uuid/eaedae38-8ce8-4be8-8de4-9f5773746ca6:root:allow-discards elevator=bfq pcie_aspm=force i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1
    [ 0.000000] PCIe ASPM is forcibly enabled
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7855356k/8886272k available (4564k kernel code, 809232k absent, 221684k reserved, 4219k data, 728k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:4352 nr_irqs:1192 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 32505856 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.003333] Detected 2594.112 MHz processor.
    [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.06 BogoMIPS (lpj=8647040)
    [ 0.000008] pid_max: default: 32768 minimum: 301
    [ 0.000054] Security Framework initialized
    [ 0.000060] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000080] Mount-cache hash table entries: 256
    [ 0.000340] Initializing cgroup subsys memory
    [ 0.000352] Initializing cgroup subsys devices
    [ 0.000354] Initializing cgroup subsys freezer
    [ 0.000356] Initializing cgroup subsys net_cls
    [ 0.000358] Initializing cgroup subsys blkio
    [ 0.000360] Initializing cgroup subsys bfqio
    [ 0.000402] CPU: Physical Processor ID: 0
    [ 0.000403] CPU: Processor Core ID: 0
    [ 0.000411] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.001152] mce: CPU supports 7 MCE banks
    [ 0.001171] CPU0: Thermal monitoring enabled (TM1)
    [ 0.001183] using mwait in idle threads.
    [ 0.003008] ACPI: Core revision 20120320
    [ 0.016492] ftrace: allocating 17712 entries in 70 pages
    [ 0.031486] DMAR: Host address width 36
    [ 0.031490] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.031501] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
    [ 0.031503] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.031511] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
    [ 0.031513] DMAR: RMRR base: 0x000000da2ba000 end: 0x000000da2d0fff
    [ 0.031515] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff
    [ 0.031594] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
    [ 0.031595] HPET id 0 under DRHD base 0xfed91000
    [ 0.031867] Enabled IRQ remapping in x2apic mode
    [ 0.031870] Enabling x2apic
    [ 0.031872] Enabled x2apic
    [ 0.031882] Switched APIC routing to cluster x2apic.
    [ 0.032392] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.065338] CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz stepping 09
    [ 0.171208] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
    [ 0.171218] ... version: 3
    [ 0.171220] ... bit width: 48
    [ 0.171221] ... generic registers: 4
    [ 0.171223] ... value mask: 0000ffffffffffff
    [ 0.171225] ... max period: 000000007fffffff
    [ 0.171226] ... fixed-purpose events: 3
    [ 0.171228] ... event mask: 000000070000000f
    [ 0.171449] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.184519] Booting Node 0, Processors #1 #2 #3
    [ 0.226810] Brought up 4 CPUs
    [ 0.226815] Total of 4 processors activated (20761.24 BogoMIPS).
    [ 0.232724] devtmpfs: initialized
    [ 0.234921] PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes)
    [ 0.236465] NET: Registered protocol family 16
    [ 0.236687] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.236691] ACPI: bus type pci registered
    [ 0.236948] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.236952] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.248222] PCI: Using configuration type 1 for base access
    [ 0.248988] bio: create slab <bio-0> at 0
    [ 0.249066] ACPI: Added _OSI(Module Device)
    [ 0.249069] ACPI: Added _OSI(Processor Device)
    [ 0.249071] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.249074] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.251907] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.260088] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.266042] ACPI: SSDT 00000000dae3a018 00A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
    [ 0.266772] ACPI: Dynamic OEM Table Load:
    [ 0.266776] ACPI: SSDT (null) 00A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
    [ 0.275494] ACPI: SSDT 00000000dae3ba98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
    [ 0.276269] ACPI: Dynamic OEM Table Load:
    [ 0.276273] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
    [ 0.276440] ACPI: SSDT 00000000dae39d98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
    [ 0.277155] ACPI: Dynamic OEM Table Load:
    [ 0.277158] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
    [ 0.278161] ACPI: Interpreter enabled
    [ 0.278166] ACPI: (supports S0 S3 S4 S5)
    [ 0.278201] ACPI: Using IOAPIC for interrupt routing
    [ 0.282017] ACPI: Power Resource [PUBS] (on)
    [ 0.286423] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
    [ 0.288261] ACPI: ACPI Dock Station Driver: 3 docks/bays found
    [ 0.288267] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.288392] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
    [ 0.288425] pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7]
    [ 0.288428] pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff]
    [ 0.288431] pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.288442] pci_root PNP0A08:00: >host bridge window [mem 0xdfa00000-0xfebfffff]
    [ 0.288445] pci_root PNP0A08:00: >host bridge window [mem 0xfed40000-0xfed4bfff]
    [ 0.288496] PCI host bridge to bus 0000:00
    [ 0.288500] pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
    [ 0.288503] pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
    [ 0.288506] pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.288509] pci_bus 0000:00: >root bus resource [mem 0xdfa00000-0xfebfffff]
    [ 0.288512] pci_bus 0000:00: >root bus resource [mem 0xfed40000-0xfed4bfff]
    [ 0.288526] pci 0000:00:00.0: >[8086:0154] type 00 class 0x060000
    [ 0.288593] pci 0000:00:02.0: >[8086:0166] type 00 class 0x030000
    [ 0.288611] pci 0000:00:02.0: >reg 10: [mem 0xf0000000-0xf03fffff 64bit]
    [ 0.288622] pci 0000:00:02.0: >reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.288630] pci 0000:00:02.0: >reg 20: [io 0x4000-0x403f]
    [ 0.288734] pci 0000:00:14.0: >[8086:1e31] type 00 class 0x0c0330
    [ 0.288777] pci 0000:00:14.0: >reg 10: [mem 0xf1520000-0xf152ffff 64bit]
    [ 0.288917] pci 0000:00:14.0: >PME# supported from D3hot D3cold
    [ 0.288959] pci 0000:00:16.0: >[8086:1e3a] type 00 class 0x078000
    [ 0.289001] pci 0000:00:16.0: >reg 10: [mem 0xf1535000-0xf153500f 64bit]
    [ 0.289141] pci 0000:00:16.0: >PME# supported from D0 D3hot D3cold
    [ 0.289187] pci 0000:00:16.3: >[8086:1e3d] type 00 class 0x070002
    [ 0.289221] pci 0000:00:16.3: >reg 10: [io 0x40b0-0x40b7]
    [ 0.289237] pci 0000:00:16.3: >reg 14: [mem 0xf153c000-0xf153cfff]
    [ 0.289404] pci 0000:00:19.0: >[8086:1502] type 00 class 0x020000
    [ 0.289441] pci 0000:00:19.0: >reg 10: [mem 0xf1500000-0xf151ffff]
    [ 0.289455] pci 0000:00:19.0: >reg 14: [mem 0xf153b000-0xf153bfff]
    [ 0.289472] pci 0000:00:19.0: >reg 18: [io 0x4080-0x409f]
    [ 0.289597] pci 0000:00:19.0: >PME# supported from D0 D3hot D3cold
    [ 0.289641] pci 0000:00:1a.0: >[8086:1e2d] type 00 class 0x0c0320
    [ 0.289679] pci 0000:00:1a.0: >reg 10: [mem 0xf153a000-0xf153a3ff]
    [ 0.289833] pci 0000:00:1a.0: >PME# supported from D0 D3hot D3cold
    [ 0.289883] pci 0000:00:1b.0: >[8086:1e20] type 00 class 0x040300
    [ 0.289914] pci 0000:00:1b.0: >reg 10: [mem 0xf1530000-0xf1533fff 64bit]
    [ 0.290053] pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
    [ 0.290097] pci 0000:00:1c.0: >[8086:1e10] type 01 class 0x060400
    [ 0.290257] pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold
    [ 0.290305] pci 0000:00:1c.1: >[8086:1e12] type 01 class 0x060400
    [ 0.290461] pci 0000:00:1c.1: >PME# supported from D0 D3hot D3cold
    [ 0.290531] pci 0000:00:1d.0: >[8086:1e26] type 00 class 0x0c0320
    [ 0.290570] pci 0000:00:1d.0: >reg 10: [mem 0xf1539000-0xf15393ff]
    [ 0.290727] pci 0000:00:1d.0: >PME# supported from D0 D3hot D3cold
    [ 0.290769] pci 0000:00:1f.0: >[8086:1e55] type 00 class 0x060100
    [ 0.290969] pci 0000:00:1f.2: >[8086:1e03] type 00 class 0x010601
    [ 0.291019] pci 0000:00:1f.2: >reg 10: [io 0x40a8-0x40af]
    [ 0.291042] pci 0000:00:1f.2: >reg 14: [io 0x40bc-0x40bf]
    [ 0.291062] pci 0000:00:1f.2: >reg 18: [io 0x40a0-0x40a7]
    [ 0.291081] pci 0000:00:1f.2: >reg 1c: [io 0x40b8-0x40bb]
    [ 0.291099] pci 0000:00:1f.2: >reg 20: [io 0x4060-0x407f]
    [ 0.291115] pci 0000:00:1f.2: >reg 24: [mem 0xf1538000-0xf15387ff]
    [ 0.291221] pci 0000:00:1f.2: >PME# supported from D3hot
    [ 0.291257] pci 0000:00:1f.3: >[8086:1e22] type 00 class 0x0c0500
    [ 0.291288] pci 0000:00:1f.3: >reg 10: [mem 0xf1534000-0xf15340ff 64bit]
    [ 0.291335] pci 0000:00:1f.3: >reg 20: [io 0xefa0-0xefbf]
    [ 0.291666] pci 0000:02:00.0: >[1180:e823] type 00 class 0x088001
    [ 0.291688] pci 0000:02:00.0: >MMC controller base frequency changed to 50Mhz.
    [ 0.291719] pci 0000:02:00.0: >reg 10: [mem 0xf0d00000-0xf0d000ff]
    [ 0.291937] pci 0000:02:00.0: >supports D1 D2
    [ 0.291940] pci 0000:02:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.298634] pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
    [ 0.298641] pci 0000:00:1c.0: > bridge window [io 0x3000-0x3fff]
    [ 0.298648] pci 0000:00:1c.0: > bridge window [mem 0xf0d00000-0xf14fffff]
    [ 0.298660] pci 0000:00:1c.0: > bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
    [ 0.299037] pci 0000:03:00.0: >[8086:0085] type 00 class 0x028000
    [ 0.299394] pci 0000:03:00.0: >reg 10: [mem 0xf0c00000-0xf0c01fff 64bit]
    [ 0.300992] pci 0000:03:00.0: >PME# supported from D0 D3hot D3cold
    [ 0.308536] pci 0000:00:1c.1: >PCI bridge to [bus 03-03]
    [ 0.308549] pci 0000:00:1c.1: > bridge window [mem 0xf0c00000-0xf0cfffff]
    [ 0.308580] pci_bus 0000:00: >on NUMA node 0
    [ 0.308585] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.308710] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
    [ 0.308754] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
    [ 0.308909] pci0000:00: >Requesting ACPI _OSC control (0x1d)
    [ 0.309066] pci0000:00: >ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
    [ 0.309068] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.312181] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.312276] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11)
    [ 0.312362] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
    [ 0.312450] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 9 10 11)
    [ 0.312540] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 9 10 11)
    [ 0.312628] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11)
    [ 0.312719] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.312806] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
    [ 0.312935] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.312944] vgaarb: loaded
    [ 0.312946] vgaarb: bridge control possible 0000:00:02.0
    [ 0.312993] PCI: Using ACPI for IRQ routing
    [ 0.316752] PCI: pci_cache_line_size set to 64 bytes
    [ 0.317278] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.317281] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
    [ 0.317283] e820: reserve RAM buffer [mem 0xcec30000-0xcfffffff]
    [ 0.317285] e820: reserve RAM buffer [mem 0x21e600000-0x21fffffff]
    [ 0.317418] NetLabel: Initializing
    [ 0.317420] NetLabel: domain hash size = 128
    [ 0.317422] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.317439] NetLabel: unlabeled traffic allowed by default
    [ 0.317483] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.317493] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.319514] Switching to clocksource hpet
    [ 0.327246] pnp: PnP ACPI init
    [ 0.327272] ACPI: bus type pnp registered
    [ 0.327827] pnp 00:00: >[mem 0x00000000-0x0009ffff]
    [ 0.327831] pnp 00:00: >[mem 0x000c0000-0x000c3fff]
    [ 0.327833] pnp 00:00: >[mem 0x000c4000-0x000c7fff]
    [ 0.327836] pnp 00:00: >[mem 0x000c8000-0x000cbfff]
    [ 0.327839] pnp 00:00: >[mem 0x000cc000-0x000cffff]
    [ 0.327841] pnp 00:00: >[mem 0x000d0000-0x000d3fff]
    [ 0.327844] pnp 00:00: >[mem 0x000d4000-0x000d7fff]
    [ 0.327846] pnp 00:00: >[mem 0x000d8000-0x000dbfff]
    [ 0.327849] pnp 00:00: >[mem 0x000dc000-0x000dffff]
    [ 0.327851] pnp 00:00: >[mem 0x000e0000-0x000e3fff]
    [ 0.327854] pnp 00:00: >[mem 0x000e4000-0x000e7fff]
    [ 0.327856] pnp 00:00: >[mem 0x000e8000-0x000ebfff]
    [ 0.327859] pnp 00:00: >[mem 0x000ec000-0x000effff]
    [ 0.327861] pnp 00:00: >[mem 0x000f0000-0x000fffff]
    [ 0.327864] pnp 00:00: >[mem 0x00100000-0xdf9fffff]
    [ 0.327867] pnp 00:00: >[mem 0xfec00000-0xfed3ffff]
    [ 0.327869] pnp 00:00: >[mem 0xfed4c000-0xffffffff]
    [ 0.327946] system 00:00: >[mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.327950] system 00:00: >[mem 0x000c0000-0x000c3fff] could not be reserved
    [ 0.327953] system 00:00: >[mem 0x000c4000-0x000c7fff] could not be reserved
    [ 0.327957] system 00:00: >[mem 0x000c8000-0x000cbfff] has been reserved
    [ 0.327960] system 00:00: >[mem 0x000cc000-0x000cffff] has been reserved
    [ 0.327963] system 00:00: >[mem 0x000d0000-0x000d3fff] has been reserved
    [ 0.327966] system 00:00: >[mem 0x000d4000-0x000d7fff] has been reserved
    [ 0.327969] system 00:00: >[mem 0x000d8000-0x000dbfff] has been reserved
    [ 0.327972] system 00:00: >[mem 0x000dc000-0x000dffff] has been reserved
    [ 0.327976] system 00:00: >[mem 0x000e0000-0x000e3fff] could not be reserved
    [ 0.327979] system 00:00: >[mem 0x000e4000-0x000e7fff] could not be reserved
    [ 0.327982] system 00:00: >[mem 0x000e8000-0x000ebfff] could not be reserved
    [ 0.327985] system 00:00: >[mem 0x000ec000-0x000effff] could not be reserved
    [ 0.327988] system 00:00: >[mem 0x000f0000-0x000fffff] could not be reserved
    [ 0.327992] system 00:00: >[mem 0x00100000-0xdf9fffff] could not be reserved
    [ 0.327995] system 00:00: >[mem 0xfec00000-0xfed3ffff] could not be reserved
    [ 0.327999] system 00:00: >[mem 0xfed4c000-0xffffffff] could not be reserved
    [ 0.328005] system 00:00: >Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.328034] pnp 00:01: >[bus 00-3f]
    [ 0.328037] pnp 00:01: >[io 0x0cf8-0x0cff]
    [ 0.328040] pnp 00:01: >[io 0x0000-0x0cf7 window]
    [ 0.328043] pnp 00:01: >[io 0x0d00-0xffff window]
    [ 0.328046] pnp 00:01: >[mem 0x000a0000-0x000bffff window]
    [ 0.328049] pnp 00:01: >[mem 0x000c0000-0x000c3fff window]
    [ 0.328052] pnp 00:01: >[mem 0x000c4000-0x000c7fff window]
    [ 0.328057] pnp 00:01: >[mem 0x000c8000-0x000cbfff window]
    [ 0.328059] pnp 00:01: >[mem 0x000cc000-0x000cffff window]
    [ 0.328062] pnp 00:01: >[mem 0x000d0000-0x000d3fff window]
    [ 0.328065] pnp 00:01: >[mem 0x000d4000-0x000d7fff window]
    [ 0.328067] pnp 00:01: >[mem 0x000d8000-0x000dbfff window]
    [ 0.328070] pnp 00:01: >[mem 0x000dc000-0x000dffff window]
    [ 0.328073] pnp 00:01: >[mem 0x000e0000-0x000e3fff window]
    [ 0.328075] pnp 00:01: >[mem 0x000e4000-0x000e7fff window]
    [ 0.328078] pnp 00:01: >[mem 0x000e8000-0x000ebfff window]
    [ 0.328081] pnp 00:01: >[mem 0x000ec000-0x000effff window]
    [ 0.328084] pnp 00:01: >[mem 0xdfa00000-0xfebfffff window]
    [ 0.328086] pnp 00:01: >[mem 0xfed40000-0xfed4bfff window]
    [ 0.328166] pnp 00:01: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.328256] pnp 00:02: >[io 0x0010-0x001f]
    [ 0.328259] pnp 00:02: >[io 0x0090-0x009f]
    [ 0.328262] pnp 00:02: >[io 0x0024-0x0025]
    [ 0.328264] pnp 00:02: >[io 0x0028-0x0029]
    [ 0.328267] pnp 00:02: >[io 0x002c-0x002d]
    [ 0.328269] pnp 00:02: >[io 0x0030-0x0031]
    [ 0.328271] pnp 00:02: >[io 0x0034-0x0035]
    [ 0.328274] pnp 00:02: >[io 0x0038-0x0039]
    [ 0.328276] pnp 00:02: >[io 0x003c-0x003d]
    [ 0.328279] pnp 00:02: >[io 0x00a4-0x00a5]
    [ 0.328281] pnp 00:02: >[io 0x00a8-0x00a9]
    [ 0.328283] pnp 00:02: >[io 0x00ac-0x00ad]
    [ 0.328286] pnp 00:02: >[io 0x00b0-0x00b5]
    [ 0.328288] pnp 00:02: >[io 0x00b8-0x00b9]
    [ 0.328291] pnp 00:02: >[io 0x00bc-0x00bd]
    [ 0.328293] pnp 00:02: >[io 0x0050-0x0053]
    [ 0.328295] pnp 00:02: >[io 0x0072-0x0077]
    [ 0.328298] pnp 00:02: >[io 0x0400-0x047f]
    [ 0.328300] pnp 00:02: >[io 0x0500-0x057f]
    [ 0.328303] pnp 00:02: >[io 0x0800-0x080f]
    [ 0.328305] pnp 00:02: >[io 0x15e0-0x15ef]
    [ 0.328308] pnp 00:02: >[io 0x1600-0x167f]
    [ 0.328310] pnp 00:02: >[mem 0xf8000000-0xfbffffff]
    [ 0.328313] pnp 00:02: >[mem 0xfffff000-0xffffffff]
    [ 0.328316] pnp 00:02: >[mem 0xfed1c000-0xfed1ffff]
    [ 0.328318] pnp 00:02: >[mem 0xfed10000-0xfed13fff]
    [ 0.328321] pnp 00:02: >[mem 0xfed18000-0xfed18fff]
    [ 0.328323] pnp 00:02: >[mem 0xfed19000-0xfed19fff]
    [ 0.328326] pnp 00:02: >[mem 0xfed45000-0xfed4bfff]
    [ 0.328403] system 00:02: >[io 0x0400-0x047f] has been reserved
    [ 0.328407] system 00:02: >[io 0x0500-0x057f] has been reserved
    [ 0.328410] system 00:02: >[io 0x0800-0x080f] has been reserved
    [ 0.328413] system 00:02: >[io 0x15e0-0x15ef] has been reserved
    [ 0.328416] system 00:02: >[io 0x1600-0x167f] has been reserved
    [ 0.328420] system 00:02: >[mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.328423] system 00:02: >[mem 0xfffff000-0xffffffff] has been reserved
    [ 0.328427] system 00:02: >[mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.328430] system 00:02: >[mem 0xfed10000-0xfed13fff] has been reserved
    [ 0.328433] system 00:02: >[mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.328436] system 00:02: >[mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.328440] system 00:02: >[mem 0xfed45000-0xfed4bfff] has been reserved
    [ 0.328444] system 00:02: >Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.328508] pnp 00:03: >[mem 0xfed00000-0xfed003ff]
    [ 0.328550] pnp 00:03: >Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.328564] pnp 00:04: >[io 0x0000-0x000f]
    [ 0.328566] pnp 00:04: >[io 0x0080-0x008f]
    [ 0.328569] pnp 00:04: >[io 0x00c0-0x00df]
    [ 0.328572] pnp 00:04: >[dma 4]
    [ 0.328608] pnp 00:04: >Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.328618] pnp 00:05: >[io 0x0061]
    [ 0.328655] pnp 00:05: >Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.328666] pnp 00:06: >[io 0x00f0]
    [ 0.328686] pnp 00:06: >[irq 13]
    [ 0.328723] pnp 00:06: >Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.328734] pnp 00:07: >[io 0x0070-0x0071]
    [ 0.328746] pnp 00:07: >[irq 8]
    [ 0.328785] pnp 00:07: >Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.328796] pnp 00:08: >[io 0x0060]
    [ 0.328798] pnp 00:08: >[io 0x0064]
    [ 0.328810] pnp 00:08: >[irq 1]
    [ 0.328847] pnp 00:08: >Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.328866] pnp 00:09: >[irq 12]
    [ 0.328906] pnp 00:09: >Plug and Play ACPI device, IDs LEN0020 PNP0f13 (active)
    [ 0.328954] pnp 00:0a: >[mem 0xfed40000-0xfed44fff]
    [ 0.328995] pnp 00:0a: >Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
    [ 0.329609] pnp: PnP ACPI: found 11 devices
    [ 0.329611] ACPI: ACPI bus type pnp unregistered
    [ 0.336879] pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
    [ 0.336889] pci 0000:00:1c.0: > bridge window [io 0x3000-0x3fff]
    [ 0.336899] pci 0000:00:1c.0: > bridge window [mem 0xf0d00000-0xf14fffff]
    [ 0.336906] pci 0000:00:1c.0: > bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
    [ 0.336917] pci 0000:00:1c.1: >PCI bridge to [bus 03-03]
    [ 0.336926] pci 0000:00:1c.1: > bridge window [mem 0xf0c00000-0xf0cfffff]
    [ 0.336983] pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
    [ 0.336986] pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
    [ 0.336989] pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.336992] pci_bus 0000:00: >resource 7 [mem 0xdfa00000-0xfebfffff]
    [ 0.336995] pci_bus 0000:00: >resource 8 [mem 0xfed40000-0xfed4bfff]
    [ 0.336999] pci_bus 0000:02: >resource 0 [io 0x3000-0x3fff]
    [ 0.337002] pci_bus 0000:02: >resource 1 [mem 0xf0d00000-0xf14fffff]
    [ 0.337005] pci_bus 0000:02: >resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
    [ 0.337008] pci_bus 0000:03: >resource 1 [mem 0xf0c00000-0xf0cfffff]
    [ 0.337049] NET: Registered protocol family 2
    [ 0.337123] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.337499] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    [ 0.338433] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.338622] TCP: Hash tables configured (established 262144 bind 65536)
    [ 0.338625] TCP: reno registered
    [ 0.338629] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.338661] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.338788] NET: Registered protocol family 1
    [ 0.338806] pci 0000:00:02.0: >Boot video device
    [ 0.338824] pci 0000:00:14.0: >power state changed by ACPI to D0
    [ 0.338832] pci 0000:00:14.0: >power state changed by ACPI to D0
    [ 0.338936] pci 0000:00:1a.0: >power state changed by ACPI to D0
    [ 0.338945] pci 0000:00:1a.0: >power state changed by ACPI to D0
    [ 0.339013] pci 0000:00:1d.0: >power state changed by ACPI to D0
    [ 0.339020] pci 0000:00:1d.0: >power state changed by ACPI to D0
    [ 0.339204] PCI: CLS 64 bytes, default 64
    [ 0.339259] Unpacking initramfs...
    [ 0.484166] Freeing initrd memory: 4436k freed
    [ 0.485085] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.485092] software IO TLB [mem 0xcac26000-0xcec25fff] (64MB) mapped at [ffff8800cac26000-ffff8800cec25fff]
    [ 0.485820] audit: initializing netlink socket (disabled)
    [ 0.485844] type=2000 audit(1349474324.373:1): initialized
    [ 0.507538] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.509963] VFS: Disk quotas dquot_6.5.2
    [ 0.510031] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.510162] msgmni has been set to 15351
    [ 0.510370] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.510400] io scheduler noop registered
    [ 0.510403] io scheduler deadline registered
    [ 0.510476] io scheduler cfq registered
    [ 0.510512] io scheduler bfq registered (default)
    [ 0.510862] vesafb: mode is 1366x768x32, linelength=5504, pages=0
    [ 0.510863] vesafb: scrolling: redraw
    [ 0.510866] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.511660] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004100000, using 4160k, total 4160k
    [ 0.644714] Console: switching to colour frame buffer device 170x48
    [ 0.777321] fb0: VESA VGA frame buffer device
    [ 0.777334] intel_idle: does not run on family 6 model 58
    [ 0.777366] GHES: HEST is not enabled!
    [ 0.777437] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.798321] 0000:00:16.3: ttyS0 at I/O 0x40b0 (irq = 19) is a 16550A
    [ 0.798587] Linux agpgart interface v0.103
    [ 0.798708] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    [ 0.800179] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.800217] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.800331] mousedev: PS/2 mouse device common for all mice
    [ 0.800426] rtc_cmos 00:07: >RTC can wake from S4
    [ 0.800603] rtc_cmos 00:07: >rtc core: registered rtc_cmos as rtc0
    [ 0.800641] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.800651] cpuidle: using governor ladder
    [ 0.800654] cpuidle: using governor menu
    [ 0.800827] drop_monitor: Initializing network drop monitor service
    [ 0.800932] TCP: cubic registered
    [ 0.801082] NET: Registered protocol family 10
    [ 0.801353] NET: Registered protocol family 17
    [ 0.801376] Key type dns_resolver registered
    [ 0.801482] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.801614] PM: Hibernation image not present or could not be loaded.
    [ 0.801630] registered taskstats version 1
    [ 0.802485] rtc_cmos 00:07: >setting system clock to 2012-10-05 21:58:45 UTC (1349474325)
    [ 0.804449] Freeing unused kernel memory: 728k freed
    [ 0.804580] Write protecting the kernel read-only data: 8192k
    [ 0.811658] Freeing unused kernel memory: 1568k freed
    [ 0.814824] Freeing unused kernel memory: 628k freed
    [ 0.814952] BFS CPU scheduler v0.424 by Con Kolivas.
    [ 0.826536] systemd-udevd[49]: starting version 193
    [ 0.836823] [drm] Initialized drm 1.1.0 20060810
    [ 0.837996] agpgart-intel 0000:00:00.0: >Intel Ivybridge Chipset
    [ 0.838144] agpgart-intel 0000:00:00.0: >detected gtt size: 2097152K total, 262144K mappable
    [ 0.839917] agpgart-intel 0000:00:00.0: >detected 65536K stolen memory
    [ 0.840091] agpgart-intel 0000:00:00.0: >AGP aperture is 256M @ 0xe0000000
    [ 0.840993] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 0.841235] ACPI: Lid Switch [LID]
    [ 0.841395] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [ 0.841405] ACPI: Sleep Button [SLPB]
    [ 0.841633] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 0.841641] ACPI: Power Button [PWRF]
    [ 0.846990] i915 0000:00:02.0: >power state changed by ACPI to D0
    [ 0.846999] i915 0000:00:02.0: >power state changed by ACPI to D0
    [ 0.847343] checking generic (e0000000 410000) vs hw (e0000000 10000000)
    [ 0.847346] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 0.847366] Console: switching to colour dummy device 80x25
    [ 0.847527] i915 0000:00:02.0: >setting latency timer to 64
    [ 0.905312] i915 0000:00:02.0: >irq 42 for MSI/MSI-X
    [ 0.905332] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 0.905335] [drm] Driver supports precise vblank timestamp query.
    [ 0.905673] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 1.397148] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 1.484088] Refined TSC clocksource calibration: 2594.103 MHz.
    [ 1.484095] Switching to clocksource tsc
    [ 1.626949] fbcon: inteldrmfb (fb0) is primary device
    [ 1.866718] Console: switching to colour frame buffer device 170x48
    [ 1.872430] fb0: inteldrmfb frame buffer device
    [ 1.872432] drm: registered panic notifier
    [ 1.894904] acpi device:01: >registered as cooling_device0
    [ 1.895021] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    [ 1.895113] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
    [ 1.895193] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 1.952321] ACPI: bus type usb registered
    [ 1.952380] usbcore: registered new interface driver usbfs
    [ 1.952406] usbcore: registered new interface driver hub
    [ 1.952466] usbcore: registered new device driver usb
    [ 1.955058] xhci_hcd 0000:00:14.0: >power state changed by ACPI to D0
    [ 1.955072] xhci_hcd 0000:00:14.0: >power state changed by ACPI to D0
    [ 1.955194] xhci_hcd 0000:00:14.0: >setting latency timer to 64
    [ 1.955206] xhci_hcd 0000:00:14.0: >xHCI Host Controller
    [ 1.955283] xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 1
    [ 1.955735] xhci_hcd 0000:00:14.0: >cache line size of 64 is not supported
    [ 1.955770] xhci_hcd 0000:00:14.0: >irq 16, io mem 0xf1520000
    [ 1.955956] xhci_hcd 0000:00:14.0: >irq 43 for MSI/MSI-X
    [ 1.956609] xHCI xhci_add_endpoint called for root hub
    [ 1.956614] xHCI xhci_check_bandwidth called for root hub
    [ 1.956797] hub 1-0:1.0: >USB hub found
    [ 1.956816] hub 1-0:1.0: >4 ports detected
    [ 1.957309] xhci_hcd 0000:00:14.0: >xHCI Host Controller
    [ 1.957321] xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 2
    [ 1.957642] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.957693] SCSI subsystem initialized
    [ 1.957849] xHCI xhci_add_endpoint called for root hub
    [ 1.957853] xHCI xhci_check_bandwidth called for root hub
    [ 1.957967] hub 2-0:1.0: >USB hub found
    [ 1.957983] hub 2-0:1.0: >4 ports detected
    [ 1.961389] libata version 3.00 loaded.
    [ 1.963515] ehci_hcd 0000:00:1a.0: >power state changed by ACPI to D0
    [ 1.963536] ehci_hcd 0000:00:1a.0: >power state changed by ACPI to D0
    [ 1.963825] ehci_hcd 0000:00:1a.0: >setting latency timer to 64
    [ 1.963836] ehci_hcd 0000:00:1a.0: >EHCI Host Controller
    [ 1.963851] ehci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 3
    [ 1.963905] ehci_hcd 0000:00:1a.0: >debug port 2
    [ 1.967782] ehci_hcd 0000:00:1a.0: >cache line size of 64 is not supported
    [ 1.967809] ehci_hcd 0000:00:1a.0: >irq 16, io mem 0xf153a000
    [ 1.976476] ehci_hcd 0000:00:1a.0: >USB 2.0 started, EHCI 1.00
    [ 1.976911] hub 3-0:1.0: >USB hub found
    [ 1.976924] hub 3-0:1.0: >3 ports detected
    [ 1.977173] ehci_hcd 0000:00:1d.0: >power state changed by ACPI to D0
    [ 1.977188] ehci_hcd 0000:00:1d.0: >power state changed by ACPI to D0
    [ 1.977261] ehci_hcd 0000:00:1d.0: >setting latency timer to 64
    [ 1.977271] ehci_hcd 0000:00:1d.0: >EHCI Host Controller
    [ 1.977287] ehci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 4
    [ 1.977334] ehci_hcd 0000:00:1d.0: >debug port 2
    [ 1.981215] ehci_hcd 0000:00:1d.0: >cache line size of 64 is not supported
    [ 1.981250] ehci_hcd 0000:00:1d.0: >irq 23, io mem 0xf1539000
    [ 1.989770] ehci_hcd 0000:00:1d.0: >USB 2.0 started, EHCI 1.00
    [ 1.989984] hub 4-0:1.0: >USB hub found
    [ 1.989991] hub 4-0:1.0: >3 ports detected
    [ 1.990146] ahci 0000:00:1f.2: >version 3.0
    [ 1.990272] ahci 0000:00:1f.2: >irq 44 for MSI/MSI-X
    [ 1.990362] ahci: SSS flag set, parallel bus scan disabled
    [ 2.003089] ahci 0000:00:1f.2: >AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x15 impl SATA mode
    [ 2.003095] ahci 0000:00:1f.2: >flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
    [ 2.003105] ahci 0000:00:1f.2: >setting latency timer to 64
    [ 2.017393] scsi0 : ahci
    [ 2.017525] scsi1 : ahci
    [ 2.017635] scsi2 : ahci
    [ 2.017742] scsi3 : ahci
    [ 2.017835] scsi4 : ahci
    [ 2.017969] scsi5 : ahci
    [ 2.018983] ata1: SATA max UDMA/133 abar m2048@0xf1538000 port 0xf1538100 irq 44
    [ 2.018986] ata2: DUMMY
    [ 2.018991] ata3: SATA max UDMA/133 abar m2048@0xf1538000 port 0xf1538200 irq 44
    [ 2.018992] ata4: DUMMY
    [ 2.018998] ata5: SATA max UDMA/133 abar m2048@0xf1538000 port 0xf1538300 irq 44
    [ 2.018999] ata6: DUMMY
    [ 2.282541] usb 3-1: >new high-speed USB device number 2 using ehci_hcd
    [ 2.335779] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.336629] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.336634] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.337448] ata1.00: ATA-8: HITACHI HTS545050A7E380, GG2ZB6C0, max UDMA/133
    [ 2.337452] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.338351] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.338355] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.339161] ata1.00: configured for UDMA/133
    [ 2.339301] scsi 0:0:0:0: >Direct-Access ATA HITACHI HTS54505 GG2Z PQ: 0 ANSI: 5
    [ 2.406391] hub 3-1:1.0: >USB hub found
    [ 2.406530] hub 3-1:1.0: >6 ports detected
    [ 2.512104] usb 4-1: >new high-speed USB device number 2 using ehci_hcd
    [ 2.635899] hub 4-1:1.0: >USB hub found
    [ 2.635972] hub 4-1:1.0: >8 ports detected
    [ 2.658509] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.658857] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.658861] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.659188] ata3.00: ATA-9: M4-CT128M4SSD3, 000F, max UDMA/100
    [ 2.659192] ata3.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.659560] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.659564] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.659891] ata3.00: configured for UDMA/100
    [ 2.659988] scsi 2:0:0:0: >Direct-Access ATA M4-CT128M4SSD3 000F PQ: 0 ANSI: 5
    [ 2.701858] usb 3-1.3: >new full-speed USB device number 3 using ehci_hcd
    [ 2.851568] usb 3-1.4: >new full-speed USB device number 4 using ehci_hcd
    [ 2.977899] ata5: SATA link down (SStatus 0 SControl 300)
    [ 2.986627] sd 0:0:0:0: >[sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 2.986635] sd 0:0:0:0: >[sda] 4096-byte physical blocks
    [ 2.986736] sd 2:0:0:0: >[sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
    [ 2.986768] sd 0:0:0:0: >[sda] Write Protect is off
    [ 2.986775] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
    [ 2.986812] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.986840] sd 2:0:0:0: >[sdb] Write Protect is off
    [ 2.986848] sd 2:0:0:0: >[sdb] Mode Sense: 00 3a 00 00
    [ 2.986895] sd 2:0:0:0: >[sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.987622] sdb: sdb1 sdb2 sdb3 sdb4
    [ 2.988107] sd 2:0:0:0: >[sdb] Attached SCSI disk
    [ 3.004663] usb 3-1.6: >new high-speed USB device number 5 using ehci_hcd
    [ 3.024450] sda: sda1
    [ 3.024776] sd 0:0:0:0: >[sda] Attached SCSI disk
    [ 3.172873] device-mapper: uevent: version 1.0.3
    [ 3.173132] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
    [ 12.733471] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
    [ 12.859349] systemd[1]: systemd 194 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
    [ 12.878480] systemd[1]: Inserted module 'autofs4'
    [ 12.878810] systemd[1]: Set hostname to <laptop>.
    [ 12.963675] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 12.963750] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 12.963772] systemd[1]: Starting Remote File Systems.
    [ 12.963938] systemd[1]: Reached target Remote File Systems.
    [ 12.963956] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 12.964121] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 12.964136] systemd[1]: Starting Delayed Shutdown Socket.
    [ 12.964289] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 12.964307] systemd[1]: Starting Encrypted Volumes.
    [ 12.964433] systemd[1]: Reached target Encrypted Volumes.
    [ 12.964528] systemd[1]: Starting udev Kernel Socket.
    [ 12.964678] systemd[1]: Listening on udev Kernel Socket.
    [ 12.964758] systemd[1]: Starting udev Control Socket.
    [ 12.964910] systemd[1]: Listening on udev Control Socket.
    [ 12.964958] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 12.965237] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 12.965261] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 12.965310] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 12.965324] systemd[1]: Starting Swap.
    [ 12.965442] systemd[1]: Reached target Swap.
    [ 12.965459] systemd[1]: Expecting device dev-disk-by\x2duuid-b2a93292\x2d0c87\x2d42b2\x2d87b9\x2d3c619d084df9.device...
    [ 12.965614] systemd[1]: Expecting device dev-disk-by\x2duuid-b33e9e60\x2d3404\x2d4c99\x2d88f5\x2dff80b308da31.device...
    [ 12.965775] systemd[1]: Expecting device dev-disk-by\x2duuid-9A7883F77883D105.device...
    [ 12.965907] systemd[1]: Starting Journal Socket.
    [ 12.966083] systemd[1]: Listening on Journal Socket.
    [ 12.966110] systemd[1]: Started File System Check on Root Device.
    [ 12.966126] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 12.982627] systemd[1]: Mounting Debug File System...
    [ 13.002851] systemd[1]: Started Set Up Additional Binary Formats.
    [ 13.002951] systemd[1]: Starting udev Kernel Device Manager...
    [ 13.022624] systemd[1]: Starting udev Coldplug all Devices...
    [ 13.086129] systemd[1]: Starting Apply Kernel Variables...
    [ 13.166123] systemd[1]: Starting Load Kernel Modules...
    [ 13.185687] systemd[1]: Mounting POSIX Message Queue File System...
    [ 13.188813] systemd[1]: Mounting Huge Pages File System...
    [ 13.206949] systemd[1]: Starting Setup Virtual Console...
    [ 13.225698] systemd[1]: Starting Journal Service...
    [ 13.246895] systemd[1]: Started Journal Service.
    [ 13.250865] ACPI: Requesting acpi_cpufreq
    [ 13.252344] systemd[1]: Started Apply Kernel Variables.
    [ 13.366426] Monitor-Mwait will be used to enter C-1 state
    [ 13.366439] Monitor-Mwait will be used to enter C-2 state
    [ 13.366444] Monitor-Mwait will be used to enter C-3 state
    [ 13.366461] ACPI: acpi_idle registered with cpuidle
    [ 13.469643] systemd-udevd[178]: starting version 194
    [ 13.508276] EXT4-fs (dm-0): re-mounted. Opts: data=ordered,discard
    [ 13.647717] mei 0000:00:16.0: >setting latency timer to 64
    [ 13.647795] mei 0000:00:16.0: >irq 45 for MSI/MSI-X
    [ 13.667712] ACPI: AC Adapter [AC] (off-line)
    [ 13.670989] thermal LNXTHERM:00: >registered as thermal_zone0
    [ 13.670992] ACPI: Thermal Zone [THM0] (35 C)
    [ 13.676559] ACPI: Battery Slot [BAT0] (battery present)
    [ 13.711681] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 13.752956] wmi: Mapper loaded
    [ 13.792981] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20120320/utaddress-251)
    [ 13.792988] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 13.792995] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20120320/utaddress-251)
    [ 13.792999] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 13.793000] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 13.795053] tpm_tis 00:0a: >1.2 TPM (device-id 0x0, rev-id 78)
    [ 13.795062] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
    [ 13.795063] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
    [ 13.795116] e1000e 0000:00:19.0: >setting latency timer to 64
    [ 13.795179] e1000e 0000:00:19.0: >(unregistered net_device): Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
    [ 13.795218] e1000e 0000:00:19.0: >irq 46 for MSI/MSI-X
    [ 13.814844] iTCO_vendor_support: vendor-support=0
    [ 13.815292] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 13.815325] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
    [ 13.815348] iTCO_wdt: cannot register miscdev on minor=130 (err=-16)
    [ 13.815943] iTCO_wdt: probe of iTCO_wdt failed with error -16
    [ 13.880873] sdhci: Secure Digital Host Controller Interface driver
    [ 13.880875] sdhci: Copyright(c) Pierre Ossman
    [ 13.881404] sdhci-pci 0000:02:00.0: >SDHCI controller found [1180:e823] (rev 4)
    [ 13.881858] Registered led device: mmc0::
    [ 13.884075] tpm_tis 00:0a: >TPM is disabled/deactivated (0x6)
    [ 13.907331] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
    [ 13.961372] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x13
    [ 13.991514] e1000e 0000:00:19.0: >eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:31:12:6f
    [ 13.991517] e1000e 0000:00:19.0: >eth0: Intel(R) PRO/1000 Network Connection
    [ 13.991558] e1000e 0000:00:19.0: >eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
    [ 14.110490] Non-volatile memory driver v1.3
    [ 14.112285] thinkpad_acpi: ThinkPad ACPI Extras v0.24
    [ 14.112287] thinkpad_acpi: http://ibm-acpi.sf.net/
    [ 14.112288] thinkpad_acpi: ThinkPad BIOS G2ET82WW (2.02 ), EC unknown
    [ 14.112289] thinkpad_acpi: Lenovo ThinkPad X230, model 2306CTO
    [ 14.112912] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
    [ 14.113022] thinkpad_acpi: radio switch found; radios are enabled
    [ 14.113037] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
    [ 14.113038] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
    [ 14.114153] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
    [ 14.114474] Registered led device: tpacpi::thinklight
    [ 14.114508] Registered led device: tpacpi::power
    [ 14.114526] Registered led device: tpacpi::standby
    [ 14.114570] Registered led device: tpacpi::thinkvantage
    [ 14.114577] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
    [ 14.114715] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
    [ 14.115850] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
    [ 14.157590] snd_hda_intel 0000:00:1b.0: >irq 47 for MSI/MSI-X
    [ 14.223809] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x13
    [ 14.224260] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x13
    [ 14.224588] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x13
    [ 14.224981] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 14.239886] psmouse serio1: >trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
    [ 14.253501] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7
    [ 14.289222] mmc0: new SDHC card at address b368
    [ 14.315479] cfg80211: Calling CRDA to update world regulatory domain
    [ 14.328281] iwlwifi: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
    [ 14.328283] iwlwifi: Copyright(c) 2003-2012 Intel Corporation
    [ 14.328430] iwlwifi 0000:03:00.0: >pci_resource_len = 0x00002000
    [ 14.328432] iwlwifi 0000:03:00.0: >pci_resource_base = ffffc9000408c000
    [ 14.328433] iwlwifi 0000:03:00.0: >HW Revision ID = 0x34
    [ 14.328530] iwlwifi 0000:03:00.0: >irq 48 for MSI/MSI-X
    [ 14.348866] iwlwifi 0000:03:00.0: >loaded firmware version 17.168.5.3 build 42301
    [ 14.349194] iwlwifi 0000:03:00.0: >CONFIG_IWLWIFI_DEBUG disabled
    [ 14.349200] iwlwifi 0000:03:00.0: >CONFIG_IWLWIFI_DEBUGFS disabled
    [ 14.349204] iwlwifi 0000:03:00.0: >CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 14.349208] iwlwifi 0000:03:00.0: >CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
    [ 14.349211] iwlwifi 0000:03:00.0: >CONFIG_IWLWIFI_P2P disabled
    [ 14.349216] iwlwifi 0000:03:00.0: >Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
    [ 14.349281] iwlwifi 0000:03:00.0: >L1 Disabled; Enabling L0S
    [ 14.355723] iwlwifi 0000:03:00.0: >RF_KILL bit toggled to enable radio.
    [ 14.366879] iwlwifi 0000:03:00.0: >device EEPROM VER=0x715, CALIB=0x6
    [ 14.366882] iwlwifi 0000:03:00.0: >Device SKU: 0x1F0
    [ 14.366885] iwlwifi 0000:03:00.0: >Valid Tx ant: 0x3, Valid Rx ant: 0x3
    [ 14.366912] iwlwifi 0000:03:00.0: >Tunable channels: 13 802.11bg, 24 802.11a channels
    [ 14.367054] Registered led device: phy0-led
    [ 14.368107] mmcblk0: mmc0:b368 SMI 3.72 GiB
    [ 14.369125] mmcblk0: unknown partition table
    [ 14.450906] ieee80211 phy0: >Selected rate control algorithm 'iwl-agn-rs'
    [ 14.452299] fuse init (API version 7.19)
    [ 14.567476] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: data=ordered,discard
    [ 14.722597] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
    [ 14.827543] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 14.827611] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 14.827659] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 14.827707] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 14.827752] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
    [ 14.827798] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
    [ 14.827849] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
    [ 15.172162] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 15.418405] systemd-journald[186]: Received SIGUSR1
    [ 16.723167] Linux media interface: v0.10
    [ 16.725384] Linux video capture interface: v2.00
    [ 16.728824] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea)
    [ 16.731493] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input16
    [ 16.731542] usbcore: registered new interface driver uvcvideo
    [ 16.731544] USB Video Class driver (1.1.1)
    [ 16.851778] Bluetooth: Core ver 2.16
    [ 16.851792] NET: Registered protocol family 31
    [ 16.851793] Bluetooth: HCI device and connection manager initialized
    [ 16.851795] Bluetooth: HCI socket layer initialized
    [ 16.851796] Bluetooth: L2CAP socket layer initialized
    [ 16.851799] Bluetooth: SCO socket layer initialized
    [ 16.869953] usbcore: registered new interface driver btusb
    [ 16.959242] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 17.257834] e1000e 0000:00:19.0: >irq 46 for MSI/MSI-X
    [ 17.266346] Bluetooth: RFCOMM TTY layer initialized
    [ 17.266350] Bluetooth: RFCOMM socket layer initialized
    [ 17.266352] Bluetooth: RFCOMM ver 1.11
    [ 17.360883] e1000e 0000:00:19.0: >irq 46 for MSI/MSI-X
    [ 17.361468] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 17.363205] iwlwifi 0000:03:00.0: >L1 Disabled; Enabling L0S
    [ 17.369665] iwlwifi 0000:03:00.0: >Radio type=0x1-0x2-0x0
    [ 17.653672] iwlwifi 0000:03:00.0: >L1 Disabled; Enabling L0S
    [ 17.660125] iwlwifi 0000:03:00.0: >Radio type=0x1-0x2-0x0
    [ 17.785284] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 36.815274] wlan0: authenticate with c8:f9:f9:1b:a2:30
    [ 36.847183] wlan0: send auth to c8:f9:f9:1b:a2:30 (try 1/3)
    [ 36.890560] wlan0: authenticated
    [ 36.890728] wlan0: associate with c8:f9:f9:1b:a2:30 (try 1/3)
    [ 36.905289] wlan0: RX AssocResp from c8:f9:f9:1b:a2:30 (capab=0x421 status=0 aid=142)
    [ 36.907364] wlan0: associated
    [ 36.907945] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 803.971832] cfg80211: Calling CRDA for country: CA
    [ 812.435761] wlan0: authenticate with c8:f9:f9:1b:a2:30
    [ 812.456185] wlan0: send auth to c8:f9:f9:1b:a2:30 (try 1/3)
    [ 812.459029] wlan0: authenticated
    [ 812.459251] wlan0: waiting for beacon from c8:f9:f9:1b:a2:30
    [ 812.546537] wlan0: associate with c8:f9:f9:1b:a2:30 (try 1/3)
    [ 812.550521] wlan0: RX AssocResp from c8:f9:f9:1b:a2:30 (capab=0x421 status=0 aid=38)
    [ 812.552745] wlan0: associated
    [ 812.553891] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    If any more info if needed I'll try to supply as soon as possible.
    Thanks!

    Start with this:
    Open System Preferences, select the Network pane and select AirPort in the "Show:" popup menu.
    Set the "By default, join:" popup menu to "Preferred networks."
    Delete the listed preferred networks using the "-" button but this time we did not add it back again with the "+" button as Apple recommends.
    Set the "By default, join:" popup menu to "Automatic."
    Restart.
    Manually rejoin the AirPort network using the AirPort menu icon, i.e. selecting the network (or selecting "Other" and typing in the network name if hidden) and typing in the WPA (or WEP) password.
    If you are using the Checkpoint Secure Client software, then you need to uninstall it.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • Firefox use 100% of one CPU (Mac)

    I use last firefox (32) on MacOS X 10.6.8.
    Sometime firefox start using 100% a one CPU, from that time the only way to stop it was to quit (it take severals seconds, sometime it hang). When it start i can close all windows, firefox continue using 100% CPU.
    I follow standard instructions (update to lastest, disable plugins and extensions...) it do not work.
    I not a configuration to reproduce the problem : keep iCloud mail open in one tab is the way to reproduce the problem sometime after a few minutes, sometime after some hours : but it also happend sometime with no iCloud open...
    Paramètres de base de l'application
    Nom: Firefox
    Version: 32.0.3
    Agent utilisateur: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.6; rv:32.0) Gecko/20100101 Firefox/32.0
    Rapports de plantage des 3 derniers jours
    Tous les rapports de plantage
    Extensions
    Nom: Firebug
    Version: 2.0.4
    Activée: true
    ID: [email protected]
    Nom: Adblock Plus
    Version: 2.6.5
    Activée: false
    ID: {d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
    Nom: Copy Plain Text 2
    Version: 1.3.2
    Activée: false
    ID: [email protected]
    Nom: DuckDuckGo Plus
    Version: 0.4.2
    Activée: false
    ID: jid1-ZAdIEUB7XOzOJw@jetpack
    Nom: Lightbeam
    Version: 1.0.10.2
    Activée: false
    ID: jid1-F9UJ2thwoAm5gQ@jetpack
    Nom: Readability
    Version: 2.4
    Activée: false
    ID: {6005d9b1-d115-485a-a92a-3f6453ca3fe2}
    Accélération graphique
    Fenêtres avec accélération graphique: 1/1 OpenGL (OMTC)
    ID du périphérique: 0x9583
    ID du vendeur: 0x1002
    Rendu WebGL: ATI Technologies Inc. -- ATI Radeon HD 2600 PRO OpenGL Engine
    windowLayerManagerRemote: true
    AzureCanvasBackend: quartz
    AzureContentBackend: quartz
    AzureFallbackCanvasBackend: none
    AzureSkiaAccelerated: 0
    Préférences modifiées importantes
    accessibility.typeaheadfind.flashBar: 0
    browser.cache.disk.capacity: 358400
    browser.cache.disk.smart_size_cached_value: 358400
    browser.cache.disk.smart_size.first_run: false
    browser.cache.disk.smart_size.use_old_max: false
    browser.cache.frecency_experiment: 3
    browser.history_expire_days.mirror: 180
    browser.places.importBookmarksHTML: false
    browser.places.smartBookmarksVersion: 7
    browser.search.useDBForOrder: true
    browser.sessionstore.upgradeBackup.latestBuildID: 20140923175406
    browser.startup.homepage: about:newtab|http://www.charentelibre.fr/charente/pays-de-cognac/|http://www.sudouest.fr/charente/cognac/|https://www.ic
    browser.startup.homepage_override.buildID: 20140923175406
    browser.startup.homepage_override.mstone: 32.0.3
    dom.mozApps.used: true
    dom.w3c_touch_events.expose: false
    extensions.lastAppVersion: 32.0.3
    font.internaluseonly.changed: false
    font.size.fixed.x-western: 12
    font.size.variable.x-western: 14
    gfx.blacklist.direct2d: 3
    gfx.blacklist.layers.direct3d9: 3
    gfx.blacklist.webgl.msaa: 4
    network.cookie.prefsMigrated: true
    places.database.lastMaintenance: 1414486056
    places.history.expiration.transient_current_max_pages: 104858
    places.last_vacuum: 1341938581
    plugin.disable_full_page_plugin_for_types: application/pdf
    plugin.importedState: true
    plugin.state.adobepdfviewernpapi: 0
    plugin.state.divxbrowserplugin: 0
    plugin.state.flash: 1
    plugin.state.flip4mac wmv plugin: 0
    plugin.state.google earth web plug-in: 1
    plugin.state.iphotophotocast: 1
    plugin.state.silverlight: 0
    print.macosx.pagesetup-2: PD94bWwgdmVyc2lvbj0iMS4wIiBlbmNvZGluZz0iVVRGLTgiPz4KPCFET0NUWVBFIHBsaXN0IFBVQkxJQyAiLS8vQXBwbGUvL0RURCBQTElTVCAxLjAvL0VO
    print.print_bgcolor: false
    print.print_bgimages: false
    print.print_colorspace:
    print.print_command:
    print.print_downloadfonts: true
    print.print_duplex: 0
    print.print_evenpages: true
    print.print_in_color: true
    print.print_margin_bottom: 0.5
    print.print_margin_left: 0.5
    print.print_margin_right: 0.5
    print.print_margin_top: 0.5
    print.print_oddpages: true
    print.print_orientation: 0
    print.print_page_delay: 50
    print.print_pagedelay: 500
    print.print_paper_data: 0
    print.print_paper_height: 11.00
    print.print_paper_name:
    print.print_paper_size: 0
    print.print_paper_size_type: 1
    print.print_paper_size_unit: 0
    print.print_paper_width: 8.50
    print.print_plex_name:
    print.print_printer:
    print.print_resolution: 0
    print.print_resolution_name:
    print.print_reversed: false
    print.print_scaling: 1.00
    print.print_shrink_to_fit: true
    print.print_to_file: false
    print.print_unwriteable_margin_bottom: 17
    print.print_unwriteable_margin_left: 19
    print.print_unwriteable_margin_right: 18
    print.print_unwriteable_margin_top: 17
    privacy.donottrackheader.enabled: true
    privacy.sanitize.migrateFx3Prefs: true
    security.warn_viewing_mixed: false
    storage.vacuum.last.index: 1
    storage.vacuum.last.places.sqlite: 1413879484
    JavaScript
    Ramasse-miettes incrémentiel: true
    Accessibilité
    Activée: false
    Empêcher l'accessibilité: 0
    Versions des bibliothèques
    NSPR
    Version minimale attendue: 4.10.6
    Version utilisée: 4.10.6
    NSS
    Version minimale attendue: 3.16.5 Basic ECC
    Version utilisée: 3.16.5 Basic ECC
    NSSSMIME
    Version minimale attendue: 3.16.5 Basic ECC
    Version utilisée: 3.16.5 Basic ECC
    NSSSSL
    Version minimale attendue: 3.16.5 Basic ECC
    Version utilisée: 3.16.5 Basic ECC
    NSSUTIL
    Version minimale attendue: 3.16.5
    Version utilisée: 3.16.5
    Fonctionnalités expérimentales
    ------------------------------

    It doesn't help, has i said : i allready do standard procédure to help (what you point) : update to lastest, disable extension or theme (i do not use), disable plug-ins... nothing helps, the bug is still there.

  • ITunes will uses 100% cpu and will not close in OSX Lion

    When I start up iTunes, after a few minutes, the fan kicks on and Activity Monitor shows that it is using 100% CPU. The fan kicks up and the MBP gets warm. I have to force close to get it to shut down. iTunes match is constantly running, so maybe that has something to do with it?
    I'm not running it in Mini Player mode or anything like that, so I'm not sure what's causing the problem. Any thoughts on how to diagnose it?

    I also have this problem which has been getting worse with recent successive updates of Firefox. As a long-time user and advocate, I am about ready to look for an alternative browser. Firefox will not close and exit properly, requiring direct cancellation through Task Manager; starts up very slowly (often 1 to 2 minutes); and frequently locks up the CPU with 100% of cycles while doing NOTHING; offers to restart crashed sessions, but cannot recover and reload those sessions; will not operate correctly while any other application accesses the internet, like uTorrent. Firefox is set to delete cookies, etc. whenever the session closes, sqlite database is vacuumed regularly, CCleaner regularly wipes remaining accretions, and disk is defragged. Currently running 3.5.5 but will NOT upgrade until this problem is solved since later builds report the same problems. I know several other users who have experienced the same problem and I can no longer automatically recommend Firefox to users and clients. Is anybody paying any attention to this problem? What is being done to address this fault? Why is there no response to the original poster? Is this really a support forum or just a way to preoccupy and distract the users who suffer this malfunction? Wireless 54Mbps connection. No Adobe Flash, QuickTime, MS Silverlight, etc. installed on this machine. Firefox 3.5.5 with the following add-ons:
    Aardvark 3.0
    Adblock Plus 1.2.1
    Adblock Plus: Element Hiding Helper 1.0.6
    Free Download Manager plugin 1.3.4
    Highlighter 0.1.4
    MR Tech Toolkit 6.0.4
    repagination 2006.4.5.1
    Save Complete 1.0.1
    Session Manager 0.6.8.3
    Tab Mix Plus 0.3.8.4
    Unhide Passwords 1.2.5.1
    User Agent Switcher 0.7.2
    Thanks for any help or suggestions.

  • All programs using 100% CPU, freezing, crashing, -10810, -600, and -1712 errors

    Okay, so. I have a Macbook Pro from December 2012, a little over a year old.
    Version 10.9.1, running Mavericks
    Processor 2.4 GHz Intel Core i7
    Memory 8 GB
    Startup Disk - Macintosh HD
    I can send more info if I need to. I'm a graphic designer using Photoshop, Illustrator, and InDesign usually simultaneously, as well as Spotify, Messages, Sparrow (mail), Stickies, Tweetdeck, and Evernote. I also use a wireless mouse, drawing tablet, and second screen. This has never been a problem (I mean, my old computer had 4 GB memory and handled these programs just fine, except for Final Cut Pro 7) up until recently.
    For the last two months, my computer has been seriously out of whack.
    I'm constantly having to refresh finder
    Every time I open Google Chrome, all of my extentions crash immediately and any website I try to go to is extremely sluggish (but Safari works)
    The dock freezes
    Constant error messages: 1712, 10810, 600
    Audio fails randomly
    Overall, the problem seems to be that I can't do more than one thing at a time -- I can't take a screenshot if more than two programs are open, I can't open DMG files, I can't open Spotify if any Creative Suite program is open. I've been watching the activity monitor, and it seems like each program is trying to use 100% CPU, which doesn't seem right. I have to close every program to work in Photoshop, which makes me miss calls and emails.
    I've tried restarting in safe mode, verifiyng the disk and repairing permissions, I used time capsule to restore to a time before it was happening, and restored my user profile in Chrome. I'm at my complete wit's end trying to figure this out! I feel like my next step is to just reinstall my OS completely, but that would be a major setback for getting my work done, and I'm not even sure that would work.
    I've looked on other forums and it seems like the Mail app typically causes problems, but I don't even use it, I use Sparrow.
    PLEASE PLEASE PLEASE HELP

    Launch error -10810 in Mavericks
    I have the same issue since a couple of days. Nothing that I found in the community (rebuilding launch info using Onyx or manually deleting the apple.com-launch prefs) has helped me so far. Only some apps are affected (PasswordWallet 4.7.4 among them).
    I can launch it once and it will run fine as long as it’s open. Next time it refuses to open displaying the error -10810 message instead. I trash the app and use a fresh one off the vendor’s dmg file I downloaded and the sequence repeats.
    MacPro 2.8 QuadCore Intel Xeon, 16 Gig RAM, Samsung SSD 840 PRO Series HD plus 3 more regular 3,5“ HDs, Mavericks 10.9.3

  • 100% disk usage 20 minutes after logon

    After logging on several users in our environment experience 100% disk usage for up to 20 minutes.
    OS: Win 8.1
    I tried the following:
    Disabling Superfetch, Windows Update services and other services that might cause the issue.
    Manually configuring Virtual Memory and paging file
    Applying updates
    Disabling antivirus
    Analyzing with Procmon - unable to see root cause.
    Also ran chkdsk. 
    Any tips would be appreciated.

    Karimselm
    YOu may be able to get more detail by running a windows performance recorder trace.  Instructions for which are in the below wiki.  Since the problem appears on boot (And I assume no other time) you should use the boot configuration.  Save
    any open data as it will reboot automatically.  Upload the trace to onedrive or any file sharing service and put a link to it in you next post
    In order to diagnose your problem we need to run Windows performance toolkit the instructions for which can be found in this
    wiki
    If you have any questions feel free to ask
    Wanikiya and Dyami--Team Zigzag

  • Using up disk space

    When I work on a project, I have gotten into the habit of creating a duplicate of the project prior to beginning edits, so if I have to go back I can grab the duplicate. As I progress I have duplicate 1, duplicate 2, etc.  Eventually I get a notice that I am our of hard drive space, so I eliminate the duplicates.  I am somewhat confused, however, since I thought projects were only markers to the media and therefore used up little disk space.  Could there be something else using up the disk space?  I thought once I had imported my media, that there would be very little disk space used until my project was finalized, and I always make sure I have at least 100 or so gigs available after my media is imported.  It is clear to me that I do not yet understand the basis upon which FCPX is working and any enlightenment would be appreciated as to how I can avoid that reocurring message when working on my projects "You are almost out of disk space"  requiring me to stop and clear disk space.

    Depending on what you are doing within FCP X and the type of footage used 100 gig can disappear pretty fast.
    HD footage grabs around 40 gig an hour plus any render files that is created along the way.
    My guess is render files are accumulating.
    Have a look in the top level of the drive where the Project is stored to check out the current size.
    Final Cut Projects>Project Name>Render files.
    Al

  • Apple Mail client app (version 8.0) using 100%+ of CPU upon using mail drop (13" R-MBP running Yosemite 10.10)

    Hello Support Community,
    I am having quite the interesting issue. I have read plenty of reports where users' Apple Mail app is using 100% of CPU. This did not start for me until I went to go use the new mail drop feature in Yosemite. I am running Yosemite (10.10) on my 13" Retina - MacBook Pro (flash storage, 8GB RAM, 2.4 dual-core Intel i5) and my Apple mail is version 8.0. I have tried 3 different mail services (2 gmail accounts and iCloud), all result in the same issue. I have also done a complete erase of the hard disk and a brand new install of Yosemite, the issue persists.
    As previously stated my mail app is using 100% upon, and only while, using the mail drop feature. If I force quit the mail app and allow it a minute, the mail app returns to using less than 1% of the CPU and the app and entire system resume normal function. Upon attempting to resend the same message that is placed in my outbox the CPU usage jumps to 50-80%. After a few seconds, the CPU usage will sometimes jump higher than 100%, ranging from 130% - 199%. All of these observations were made using Activity Monitor. Of course you can see my frustration, an app using this much CPU stops every process my Mac is doing (using safari, messages, iTunes etc.) - the whole computer locks up. Even force quitting is a difficult process to attempt.
    Does anyone have a fix for this? I am at a loss and have no idea what to do. I am a pretty tech savvy guy and have tried everything that I would've thought would fix this. Is there anyway this could be a hardware issue? I don't think so but... all possibilities need to be taken into consideration, even though that one seems outlandish. Upon creating a new user account with a separate user library (but same system library) I figured the OS was the problem. I can't narrow it down to being a specific mail provider, and it can't be my OS since I have now erased and reinstalled 10.10 twice. Thank you!

    I have this same issue.  It has been driving me insane, Mac Mail uses 100% CPU most of the time I use it, after every time I open the machine, or after a sleep or even mostly after a screen saver has locked me out.  It normally settles down after 5-15 minutes, but then happens every time again.  It is killing my battery.

  • Firefox 3.6.3 & .4 uses 100% CPU and won't always close or open

    Firefox intermittently uses 100% of CPU and I have to manually turn off the computer. Firefox also does not start or finiosh correctly, the process is alive and I have to use Task Manager to end the process In the meantime I have installed IE7, as I cannot access internet banking with Firefox. Very disappointing as I have ben an enthusiastic user and promoter of FF.
    == This happened ==
    Every time Firefox opened
    == After upgrading to 3.6.3, and is no better with 3.6.4, despite deleting all add-ons

    I also have this problem which has been getting worse with recent successive updates of Firefox. As a long-time user and advocate, I am about ready to look for an alternative browser. Firefox will not close and exit properly, requiring direct cancellation through Task Manager; starts up very slowly (often 1 to 2 minutes); and frequently locks up the CPU with 100% of cycles while doing NOTHING; offers to restart crashed sessions, but cannot recover and reload those sessions; will not operate correctly while any other application accesses the internet, like uTorrent. Firefox is set to delete cookies, etc. whenever the session closes, sqlite database is vacuumed regularly, CCleaner regularly wipes remaining accretions, and disk is defragged. Currently running 3.5.5 but will NOT upgrade until this problem is solved since later builds report the same problems. I know several other users who have experienced the same problem and I can no longer automatically recommend Firefox to users and clients. Is anybody paying any attention to this problem? What is being done to address this fault? Why is there no response to the original poster? Is this really a support forum or just a way to preoccupy and distract the users who suffer this malfunction? Wireless 54Mbps connection. No Adobe Flash, QuickTime, MS Silverlight, etc. installed on this machine. Firefox 3.5.5 with the following add-ons:
    Aardvark 3.0
    Adblock Plus 1.2.1
    Adblock Plus: Element Hiding Helper 1.0.6
    Free Download Manager plugin 1.3.4
    Highlighter 0.1.4
    MR Tech Toolkit 6.0.4
    repagination 2006.4.5.1
    Save Complete 1.0.1
    Session Manager 0.6.8.3
    Tab Mix Plus 0.3.8.4
    Unhide Passwords 1.2.5.1
    User Agent Switcher 0.7.2
    Thanks for any help or suggestions.

  • Systemd-journal process using 100% of one cpu core after reboot

    journalctl -b showed
    "Process 2016 (virtuoso-t) dumped core."
    more than a few times and virtuoso-t would was using more cpu than it does most of the time.
    at 14 minutes of uptime systemd-journal stopped using 100% and went back to normal. Anyone know a way to figure out what happened here?
    update:
    systemd-coredump[3182]: Process 3133 (virtuoso-t) dumped core.
    systemd-journal[5407]: Permanent journal is using 2.6G (max allowed 4.0G, trying to leave 4.0G free of 50.7G available → current limit 4.0G).
    systemd[1]: systemd-journald.service watchdog timeout!
    systemd[1]: Starting Journal Service...
    systemd[1]: systemd-journald.service stop-sigterm timed out. Killing.
    systemd[1]: Starting Journal Service...
    systemd[1]: systemd-journald.service: main process exited, code=killed, status=9/KILL
    systemd[1]: Unit systemd-journald.service entered failed state.
    systemd[1]: systemd-journald.service has no holdoff time, scheduling restart.
    systemd[1]: Stopping Journal Service...
    systemd[1]: Starting Journal Service...
    systemd[1]: Started Journal Service.
    systemd-journal[5407]: Journal started
    dbus[365]: [system] Activating via systemd: service name='org.freedesktop.ModemManager1' unit='dbus-org.freedesktop.ModemManager1.service'
    dbus[365]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.ModemManager1.service': Unit dbus-org.freedesktop.ModemManager1.service failed to load: No such file or directory.
    systemd-coredump[3289]: Process 3235 (virtuoso-t) dumped core.
    it happened again here is what the journal was saying while it was happening (i removed lots of (virtuoso-t) dumped core that happened ... 10 or more times)
    Thanks in advance,
    Wolf Larson
    Last edited by wolflarson (2014-03-22 15:36:37)

    In the Newbie Corner of the forums, there are a few stickied threads that are recommended reads.  One of which is this one.
    If the logs are not too too much, then it can be posted here with code tags. If it is crazy big, pastebin it and then post the link.
    If this is really all the information it gives about the journal being nuts, then you might want to enable debug levels of logging for the journal and then see if you can gather more information that way.  This can either by done by using a drop-in snippet to the unit file, or by turning on debug levels for the entire system from the kernel command line.
    The journal is not designed in such a way that it can be continously written to.  There are safeguards in place to ensure that masively spamming services are cut off after a certain number of log messages in a given timeframe.  Additionally, even the flush from the journal in RAM to the disk is only done periodically.

Maybe you are looking for

  • Build Error : The name "LocalizedStrings" does not exist in the namespace

    I have localised my app to 5 languages, it builds and runs perfectly in Silverlight, but when i open the project in Blend to make changes  it shows the following error  The name "LocalizedStrings" does not exist in the namespace "clr-namespace:appnam

  • ADF page integrated in OAF as a rich region.

    Hi, We are following the post https://blogs.oracle.com/jruiz/entry/embedding_adf_ui_components_into to embded the ADF region into OAF, we are facing a serial of issues here. Our ADF page is running on a different server and when we have tried adding

  • SAP Best Practices for HCM Canada for ECC 6.0

    Hi, I want to install SAP Best Practices for HCM Canada on existing ECC 6.0 System. Is there a way to do it?? Help needed ASAP. thanks in advance. Shaukat

  • Checkbox selection

    Hi All, I am trying to read a text file and add the checkboxes dynamically to all the lines.This is working fine, but after checkbox is created I want to uncheck some prechecked checkboxes and save all the checked items in a arraylist but not able to

  • Help with inserting records conditionally in another table

    I need some help on this task please. I have a table with some records like so Table1 Column1   Column2   Column3      Colum4 1                 Name1    Lastname1     1,2 2                 Name2    Lastname2     3 3                  Name3    Lastname