Using 15" & 24" screen

- I have a problem. At home i have a 24" lcd attach to me macbookpro. when i leave home and remove the 24" lcd, the windows applications are bigger then the 15" lcd and i don't know how to resize it, meaning i can't see the right end corner to resize the windows.
- Anyone out there can help meon this?
Thank you, Paulo

Most applications have a menu -> Window -> Minimize.
Often selecting the menu item causes the window to resize so that it will fit on the screen.
Your mileage may vary depending on whether your app provides a menu -> Window -> Minimize, and how the app handles the minimize request.

Similar Messages

  • How to Use My TV screen as a Computer Screen

    Hi everyone,
    I have a 24" Intel IMAC, 1 year old. Great computer! I saw in some other posts that this is possible but I didn't quite understand what I need to do. I would like to use my TV screen as a computer screen, so I can watch things like my subscription to MLB.TV or any other video that I can play on my IMAC. I saw in some posts about using an Apple Video Adapter. Please be specific for me, is that what connects from the back of my IMAC? If so which slot? And going out from the computer, what does that connect to? What should I buy? And from there I can use a composite cables to connect to my TV? Yes, I have inputs for those on the TV.
    Thanks in advance to anyone who helps.
    Bill

    Your TV based on the jacks present (which are the same as ports), sound like quite an antique. Modern TVs have special jacks for computer hookup. Sounds like your TV has none. The best you'd hope to achieve is 720 x 480 resolution which would result in very little room for the windows on your screen, and very large text on your TV. Trying to even get the menubar and dock on the screen will be a challenge since TVs that only offer 720 x 480 resolution don't offer any screen area beyond the screen safe area for the menubar and Dock to be visible. It will just center on the screen's center, cutting off 20% of the exterior four sides. Ideally you'd want a 1080P HD-TV for computer hookup.

  • I upgraded Firefox, and now there is a blue band on my screen above the window, and I'm not getting the full use of the screen in viewing web pages. How can I get the window to expand to fill the screen as it did before?

    There is a horizontal band or gap above the Firefox window at the top of the screen, where you can see the Windows desktop behind the Firefox window. On the left side of this band are the window tabs, and the menu bar, and another bar with the names of the open windows. I would like to have the Firefox window expand to fill the entire screen, like it did before the upgrade. Thanks.

    Do you mean running Firefox in full screen mode?
    *https://support.mozilla.org/kb/how-to-use-full-screen
    If you are in full screen mode then you can hover the mouse to the top to make the Navigation Toolbar and Tab bar appear.<br />
    You can click the Maximize button at the top right to leave full screen mode or right click empty space on a toolbar and use "Exit Full Screen Mode" or press F11.
    *https://support.mozilla.org/kb/how-to-use-full-screen
    You can also run Firefox in a maximized window to have easier access to the Menu bar and Navigation Toolbar.

  • How to schedule the background job using current selection screen field val

    Hello Friends,
    How to schedule the background job using current selection screen field values.
    after completion of the job the spool should be sent as a mail to SAP Inbox.
    Is there any way to create the variant dynamically by reading the current selection screen values.
    Thanks,
    Ravi

    Hi,
    To get the variant details you can use teh following FM.
    'RS_VARIANT_CONTENTS'.
    Regards,
    Ankur Parab

  • How can i remove pictures from my droid turbo without having to use the touch screen on the phone at all?

    how can i remove pictures from my droid turbo without having to use the touch screen on the phone at all?  my screen is cracked and i am waiting on a replacement phone.  as far as i can tell in order to access the phone storage through my computer, i have to use the touchscreen to enable it so that the computer will see it as a camera.  I can't do that as the top half of the touschscreen is unresponsive.  any suggestions?  teaches me to use the backup services offered in the future, but i still need a short term solution for this time.

        I'm sorry to hear your screen is cracked spence425. I know its difficult to use the phone while its damaged. I'm happy you are receiving a replacement device. Have you saved any of your pictures and other data to the cloud? Here is a link about the cloud http://vz.to/1mF0GIx . Unfortunately, you will be unable to remove any data from the phone if the screen is unresponsive but if you are looking to transfer data to your new phone, it would have needed to be saved via the cloud first. Keep us posted.
    Kinquana_VZW
    Follow us on Twitter @vzwsupport

  • How to use At Selection Screen for fields whiledealing with Multiple Blocks

    Hi Guys,
                In my requirement i am having 4 blocks.1st block with raduio buttons for activating the opther 3 Blocks.
                  In these 3 blocks i am having some fields.
           How to do Validation for these fields.?
    I am using At Selection-screen on S-SCAD1. I am getting error"S_SCACD1 is neither a selection screen nor a Parameter"
    On the top of this" At Selection-screen on S-SCAD1" I am having"AT SELECTION-SCREEN OUTPUT."
                    Can anybody tell me how to solve this error?
    Thanks,
    Gopi.

    If you are using your block name than you should use like:
    AT SELECTION-SCREEN ON BLOCK S-SCAD1.
    Regards,
    Naimesh Patel

  • Can I connect an external video camera to a mac book pro for viewing live video so I don't have to use the little screen on the camera?

    Can I connect an external video camera to a mac book pro for viewing live video so I don't have to use the little screen on the camera?

    Shadow30 wrote:
    Can I connect an external video camera to a mac book pro for viewing live video so I don't have to use the little screen on the camera?
    • Only if your video camera supports it.  Depending on how your camera works, you may need to add preview software to your Mac to use this feature.
    • Alternatively, your camera may also be able to record directly into your Mac while you are monitoring the Mac's display.
    • If you are using a consumer camcorder that supports HDMI monitoring, a small HDTV might be an simpler solution than your Mac.  For an example of how this is done, see http://youtu.be/GVpSkZD6qE4.
    • The retailer who sold you your video camera may have other suggestions.
    • If you need more professional results, an external preview monitor will offer more capability on compatible cameras.
    Message was edited by: EZ Jim
    Mac OSX 10.9.4

  • How can i use an external screen on mountain lion when i'm running on battery power?

    Hey all:
    I just upgraded from snow leopard to Mountain Lion, and i use external screen, keyboard and mouse all the time....
    On Mountain Lion it's perfect when the power adaptor is connected as soon as you close the LID your external screen becomes the primary screeen and it's fully functional desktop (no mirroring or extension screen)
    But the problem is when i'm in battery power, in snow leopard i used to close my lid my mac goes to sleep then i wake it up using the mouse and immediately open the LID so it doesn't go to sleep again and now i'm running on battery power with a primary external screen.
    Any idea how to use an external screen on mountain lion while i'm on battery power? (i know i can use mirroring but i want just 1 primary screen and the laptop screen would be turned off )
    Thanks for the help.....
    Sherif

    Sherif Daniel wrote:
    my question is how to use an external display with mountain lion when i'm running on the laptop battery not connecting the ac adaptor?
    Thanks again
    You can't with the lid closed, that's one of the rules for clamshell mode.
    http://support.apple.com/kb/ht3131

  • Can I use a green screen in Premiere Elements 13?

    I am trying to decide between Premiere Pro and Elements 13 and would like to save some money while still being able to have those capabilities to key.
    Thank You!
    -Jesse

    Yes.
    There is a tutorial on YouTube for using the Green Screen Key Effect.
    https://www.youtube.com/watch?v=WEzg-WIHL-4&list=TLeWV36X7-3Vkhttp://

  • I had set my phone to use the pattern screen lock but now it is asking for a PIN.

    I had set my phone to use the pattern screen lock but now it is asking for a PIN.
    I turned my phone on this morning and instead of the pattern lock that I've been using with this phone since I purchased it, it is now asking for a PIN that I do not know.
    I contacted Samsung but they told me that my carrier would be able to reset the PIN for me remotely. I've been trying to find a way to chat with Verizon support but it keeps sending me to self help troubleshooting. It was so easy to get a live person on Samsung support, how do I get a real person on Verizon?
    Thanks

    Thanks deb2too, I'll keep the number for future reference. I was able to unlock the phone via https://www.google.com/android/devicemanager

  • I was making a movie on iMovie, and was trying to use the green screen to make a split screen. I pressed on the green screen button, but the second clip didn't play next to the first, and only the audio played.

    I was making a movie on iMovie, and was trying to use the green screen to make a split screen. I pressed on the green screen button, but the second clip didn't play next to the first, and only the audio played. I tried again with some different clips and some worked and some didn't. This hasn't happened before. What should I do? (I am using iMovie '09)

    No guarantess but try smc and pram resets,

  • Can I use the iMac Screen as an external screen for a PC laptop ?

    can I use the iMac Screen as an external screen for a PC laptop ?

    iMac- How to use your iMac as a Target Display Mode display
    Target Display Mode- Frequently Asked Questions (FAQ)
    I am unaware of any PCs that support connection via Target Display Mode. I have never tried it myself, so I don't know if it would work. All you can do is try provided you have an iMac that supports TDM and the proper cable adaptors.

  • Can I use my iMac Screen as an external screen for my PC laptop

    Can I use my iMac screen as an external screen for my PC laptop ?

    Thanks for your reply. After reading the article though, I'm still not really sure what the answer is. For example, you mention something that can be done, with some hurdles to go through, for 27" iMacs. Mine is a 21.5" iMac, but seems to have the same port you mentioned in the article. Or maybe it isn't. Anyway, I'm still not sure if it is possible after reading that. Interesting information though.
    doug

  • I am creating a video using the green screen option- I imported a picture for the background of the project and videotaped someone using a green screen. Is it possible to move the video of the person around so it is not blocking the picture behind it?

    I am creating a video using the green screen option in iMovie.   I imported a picture for the background of the project and videotaped someone using a green screen. Is it possible to move the video of the person around so it is not blocking the picture behind it?

    To enable this right you need Acrobat, not the free Reader.
    However, starting from Reader X it is possible to add simple markups to any file, unless it has been specifically disallowed by the creator of the file.

  • How to use conditional success Screen in SMP2.3 HWC?

    Hi All,
      Do anybody have reference for conditional success screen,
    I gone through this link SUP 2.2 Conditional Navigation Issue
    but i didnt able to do how to use conditional success Screen.
    If anybody have reference please provide me.
    Regards,
    Sravanya

    That works. Follow the below steps.
    1. Create a key on the selection screen: click on the selection screen>properties>keys>Add a key,ex. "value".
    2. MenuItem>In the properties of menu item>Parameter mappings>map the key with the key created in last step.ie. "value" instead of the key of the choice box.
    3. Get the value selected from choicebox:
    function customValidateScreen(screenKey, values) {
      if(screenKey === "Selection")
      var form = document.forms[screenKey + "Form"];
      if(form){
      SelectionValue = form.ChoiceboxKey.value;
    //ChoiceboxKey is the key of choicebox.
    //Declare a global value "SelectionValue "
    3. Map PK from program:
    customBeforeSubmit = function(screenKey, actionName, dataMessageToSend) {
      if(screenKey =="Selection" && actionName=="GoToChart" ){
      var myNewValue2 = new MessageValue();
      myNewValue2.setKey("Value");// Key created in the screen "Selection"
      myNewValue2.setValue(""+SelectionValue );
      myNewValue2.setType("TEXT");
      var mvc = dataMessageToSend.getValues();
      if( mvc ) {
      mvc.add( myNewValue1.getKey(), myNewValue1 );
    // So in the above way the data from choice box is send to online request.
    To do the conditional navigation you have to use the global value created,ex.
    hwc.customConditionalNavigation = function(currentScreenKey, actionKeyName, defaultNextScreen, conditionName, incomingDataMessage) {
      if( conditionName === 'Data'&& SelectionValue == "PieChart") {
             return false;
         }else{
        return true;
    Hope you understand how I did this.
    Midhun VP

  • How to upload multiple files in Webdynpro using File upload Screen Element

    Hi Experts,
          Can anybody tell me how to upload multiple files/pdfs in webdynpro using file upload screen element, and also please tell me what is the maximum storage limit of RAWSTRING data type,Advance Thanks.
    Regards,
    Sandesh

    Hi Sandesh,
    this is simply not supported, not in WebDynpro nor in standard HTML.
    A workaround is to upload a ZIP with all files and on server side unpack the ZIP and operate on the single files.
    I hope it will  help u..
    ----------------------OR-------------------------
    As you know using File upload UI element we can upload only one file at a time. There may be a scenario where user may want to upload any no of files at a time which is not determined at design time. This can be acheived using the ACF UpDownload UI element which requires a security whiltelist to be created
    http://scn.sap.com/docs/DOC-2270
    ----------------------OR-------------------------
    You can use Table UI element.
    Regards,
    Deepak Singh

Maybe you are looking for