Using 1st gen airport express with mavericks

When I upgraded to Mavericks, the updated Airport Utility dosen't support my version of airport express 1st generation. The old version of airport utility is not supported by mavericks. There is a version on the website that appears it may work, but I can't install it because their is a new version already installed. I cannot delete the new version, because the sytem blocks it with a message that it is necessary for the operating system.

Mavericks certainly will support a 1st Gen version of the AirPort Express, so chances are......you do not have a 1st Gen Express.
Please check the model number on the side of your Express. It starts with an "A" followed by four numbers.
A 1st Gen version is A1264. I imagine that you have A1084 or A1088, which are much older versions than the 1st Gen "n" Express,which was introduced in 2008.
Witht the A1084 or A1088, you will need to use another Mac running Leopard, Snow Leopard, or another PC to be able to administer the older AirPorts.

Similar Messages

I have just changed my network provided and now i can't find my 1st gen airport express with airport utilities

Hi, can anyone help. I've just updated my network with a new hub and now i cant find my 1st gen Airport express with the curreent Aiport utilities.

From your description, it sounds like the AirPort Express was configured to connect to your "old" router or hub...and, to do that, the Express remembered the specific ID of that device as part of the connection credentials.
The Express is likely still looking for the "old" device for which it still has the settings to connect.
Since you changed to a new hub or router, the Express has no idea how to connect to this new device.
If this is the case......then the solution will be to reset the Express back to factory default settings....and then configure it again to connect to your "new" hub.

Can I use my older airport express with an ext drive to backup time machine wireless, Can I use my older airport express with an ext drive to backup time machine wireless

Can I use an older (flat) Airport Express to attach an ext hard drive and backup time machine wirelessly? and how?

can I then connect a HD with itunes music and photos?
Now we are drifting from the original question.
Im alreadty using the HD attached to my Mac Pro...can I just connect it to the Extreme and access it wirelessly with any device on the wifi net?
You may get another opinion on this from another user, but I do not recommend this either, based on a number of experimens over the years with this.
Access to your data on the drive will be much slower. iTunes will tend to "lose" the library this way and you will have to re-point the iTunes application at the library on a regular basis.
Things are even worse with the iPhoto library. The experts over in the iPhoto support area strongly advise that you do not do this, since any break in communication between the iPhoto application and iPhoto library can easily corrupt the entire library. A wireless connection makes things even more dicey.
My advice......Use a drive connected to the Extreme for storage or other backup copies of data.....not for "working" files or libraries.
But, you may get some other opinions from users here.

How can i use my old airport express with my new imac and wireless hp print

i just bought my first imac (intel) and a wireless hp printer. i now realize that a wireless connection between my imac and my printer needs a router.
i have an airport express base station, which is a few years old. I can't find my documentation, so i don't know its specifications.
how can i find out the specs of the airport express i have and whether i can use it now? it says that it is model a1084 100-240v~ 0.2a 50-60 hz.
does that tell any knowledgeable people out there about the specs? can i search the apple website by serial number and find the specs?
thank all of you potential responders ahead of time.

Hi green jean
Try this > http://www.apple.com/airportextreme/features/printing.html
but also see > http://docs.info.apple.com/article.html?artnum=305293
Dennis

Has anyone used the the Airport Express with their Direct TV unit?

I have a DirectTV HD DVR (HR20) receiver that allows OnDemand, however, I need an internet connection. The problem is my router is in a completely different area of the house. Has anyone tried to connect wirelessly?

Oops...maybe I should mention; I am using the usb because there is no audio input on the mac. Also, I am using a Lexicon Alpha usb interface. I am miking with an Audio Technica 2020.

Using Airport Express With Sonos Components

The Sonos System wireless specs say not to use 802.11 N networks because it interferes with the Sonos mesh net. My question is does anybody have experience using 2nd Gen Airport Express network with Sonos.
I currently have my Airport Express advanced>wireless set to 802.11n (802.11b/g compatible). I am having connection problems however the 2nd Gen Airports don't give an option to not use 802.11N

Unfortunately I don't have much experience with the Sonos systems to offer any advice on, whether or not, it would be a better option than using the AirPorts ... even newer ones.
If you system has always been flaky, it may be due to limited bandwidth or excessive signal noise that is preventing AirPlay from streaming over a "clean" wireless network and not actually the AirPort hardware. If this is the case, then replacing the AirPorts would serve no real value.

How do you update the firmware on 1st Gen Airport Extreme in OSX Mountain Lion?

A friend gave me a old but never used 1st Gen Airport Extreme 802.11n WiFi Wireless Base Station. I have a couple WiFi dead zones in my house and was told that I could daisy chain the Apple Airport Extreme off of my Verizon FIOS router/modem (802.11G) to fill in the dead spots. During set up the Airport Utility told me that "This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Go to AirPort Service and Support (link) for more information.
I updated the Airport Utility to the latest version (6.2) and I am still getting the same error message and no other option to update it's firmware. Anyone know of a work around or am I fighting to losing battle here. I tried to contact Apple support, but when I entered the serial number for the Base Station it said the product was over 5 years old and didn't qualify for support service program.

was told that I could daisy chain the Apple Airport Extreme off of my Verizon FIOS router/modem (802.11G) to fill in the dead spots
Not sure what you mean by "daisy chain". The AirPort Extreme cannot "repeat" or "extend" the wireless signal from the FIOS router if you are planning to do this using wireless only.
You always need at least 2 Apple routers to be able to "extend a wireless network" using wireless only. The Apple routers would not be compatible with FIOS routers for this type of purpose.
If you can connect the AirPort Extreme to the FIOS router using a permanent wired Ethernet cable connection, then the AirPOrt could be configured to provide more wireless signal coverage that way. If you cannot run the cable, it might be possible to use a pair of Ethernet powerline adapters to send a signal over the existing AC power lines in your home.
When you open AirPort Utility 6.x and a firmware update is available, there is usually a red number next to the AirPort Exreme icon. Click on the red number......or if it does not appear, click on the AirPort Extreme icon and then hold down the option key on a Mac as you click on the Version number that is is displayed to see more "options".

Unable to set up dual band with my 1st Gen Airport Extreme

Not sure if my 1st Gen Airport extreme supports this but I unable to figure out how to setup dual band networking. I have certain devices that work on 2.4 Ghz and some that work on 5ghz. I trying to improve my network speed by separating the devices that can use 5ghz. Any advise please?

1st Gen AirPort Extreme will do either 5 GHz or 2.4 GHz....but not both simultaneously.
Simultaneous dual band was introduced in the 3rd Gen AirPort Extreme.
Simplest solution.....the current AirPort Express will do simultaneous dual band. You could then reconfigure the AirPort Extreme to extend the 2.4 GHz network for increased coverage.
Be careful with 5 GHz as this is pretty much a "same room" or "line-of-sight" deal since 5 GHz signals are much weaker than 2.4 GHz signals....they won't penetrate through walls or other obstructions nearly as well as 2.4 GHz signals.

I can't access my 1st generation airport express devices using airport utility

I have a new Motorola Surfboard Extreme wireless cable modem & router set-up on my main internet cable line. To it i've connected 1st generation airport express using an ethernet and extended it with another 1st generation airport express so i can connect to itunes and a remote printer. When I go to Aiport Utility to perform the set-up, i'm told i need to update to version 5.6. When installing Aiport Utility 5.6 I receive an error prior to completion which prevents me from performing the set-up or even seeing the two airport express devices in the program. Anyone have any ideas on how to fix this?

By "1st generation" AirPort Express are you referring to the 802.11g or 802.11n model? Version 5.6 of the AirPort Utility would be required to administer the older 802.11g Express.
If you do have an 802.11g model, are you actually running OS X 10.7.5 on your Mac?

Can I use Airport Express with iPhone in my hotel room?

Is there a way to set up an Airport Express in my hotel room when I travel, so that the provided High Speed internet cable in the room can be plugged into my Airport Express, giving me a wireless internet connection for the iPhone? I use Airport Express often this way with my MacBook, so I don't have to be tethered to the cable.

I did this about a month ago when I was in England. I just had the Airport Express with me, and had not done any configurations. I plugged it in and had the iPhone find it. It worked in some hotels, and didn't at others. When it worked it was great. I assume with some of the hotels where it didn't work, that I needed to configure it but since I didn't have my laptop I didn't have any way to configure it. Is there any kind of "universal" or "automatic" configuration you can set it up with?

Can I use the airport express with a desktop computer that is not wire less- I want to have wifi in the house for an iphone

Can i use the airport express with a desktop computer not wifi- I want wifi for my iphone

I can't seem to find any information anywhere. It seems like it should work since the AX is showing up on his wifi settings on both his iPhone and iPod. Not to mention the Apple "Genius" told him that it should work. However, they also told him that it came with an ethernet, USB and the stereo patch cables...

Can I use a second Airport Express on the 1st floor to boost the signal from the 2nd floor Airport Express?

We have a wiFi network with on Airport Express on the upper floor. Watching NetFlix via AppleTV on the television downstairs is annoying since it stops to buffer the video every few minutes (NetFlix works smoothly upstairs, closer to the Airport Express). Can I use a 2nd Airport Express downstairs to boost the signal? If so, how do I configure it?

Yes, you can use a second 802.11n AirPort Express Base Station (AXn) to extend the range of the first one.
Here are the basic steps to do so:
Dynamic WDS - Extending a Wireless Network Setup
If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
Open AirPort Utility, and then, select the base station that will connect to the Internet.
Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
Click AirPort in the toolbar, and then, click Wireless.
Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then, select the “Allow this network to be extended” checkbox.
Next, select the base station that will extend this network, and then, choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then, choose the network you want to extend from the Network Name pop-up menu.
Enter the base station network and base station password if necessary.
Click Update to update the base station with new network settings.
(ref: Pages 43-44 of Apple AirPort Networks.)

Can I use Airport Express with a USB Hard disk as a NAS solution?

What have people tried for NAS solutions that work really well wirelessly? Can I use my Airport Express with its USB port to attach a hard disk? Or do I need an Airport Extreme base station? Or some other solution?

The price of the Time Capsule includes the NAS backup system plus a hardware router for your network.
Macs do not support USB 3.0 and most likely won't because Apple's weight is behind Thunderbolt which is considerably faster and more versatile than USB.

Erro 3256 using Apple Airport Express with Windows XP Pro SP2

I am running Windows XP Pro SP2 and am trying to stream my music to the Livng room from my PC in my office. I use an Apple Airport Express. I am running iTunes 8.0.1.11 on the computer that isn't getting the signal through. Now please read the entire message before you decide it is the version of iTunes that I am using.
It was getting through just fine on my Denon 3300 but since I switched to a Denon 3802 the signal is not geting through from my main computer. It works fine from the computer sittng adjacent to it.
I also have music on a 2nd computer and am running iTunes 7.6.2.9 on it. The music gets to the living room stereo just fine using the same Apple Airport Express. The signal strength on the computer that is successful in streaming the music to the Apple Airport Express is "excellent". On the computer that is not successful, the signal strenth is "low". Now these computers are adjacent to each other and the signal has to go through the same wall and
exactly the same distance over the same network.
How can it be "excellent" on one and "low" on the other? Is it just a matter of signal strength? How do I fix that?
I keep getting "unknown error occurred 3256"
Help please. Do I have to do something to the network? or???
Remember I am a Windows user, not a Mac user. I do not have a "Configure IPv6" setting anywhere in my preferences. That must be a Mac thing.

Got the error message 3256 after downloaded latest itunes version 8.xx.
After days of reading logs and bullentin boards, uninstalling, hard resets,firewalls experiments, etc, I found solution for me. Following firmware upgrade to airport express solved. When you go to Apple download center and search for airport revisions only the MAc version pops up. However they do have this one for windows. Give it a try. Good luck.
http://www.apple.com/downloads/macosx/apple/firmware_hardware/airportexpressfirm wareupdate63forwindows.html

Using old Airport Express with new Airport Extreme to stream music

I recently purchased the newest Airport Extreme to replace my older Airport Express. I'm running OS 10.8.5. I like the speed of the new WIFI signal for streaming to Apple TV. No long waits or buffering interruptions while watching movies. I still want to use the old Airport Express to stream music from my iPhone to a stereo in another part of the house. I plugged in the Express module and it just flashes amber. Doesn't show up in Airport Utility either.

I suggest that you first perform a "factory default" reset on your old AirPort Express, and then, check out the following Apple Support article for configuring it for streaming.

Using 1st gen airport express with mavericks

Similar Messages

Maybe you are looking for