Using 2 Airport expresses-1forStereo,1forNet-Can only work1 at time...why?

My internet express is in one room and my stereo express is in another. However when I play music using itunes and the stereo express it plays in 10sec bursts and I still can't get the internet whn it is also connected... I am very confused as to why it doesn't work...
Can anyone help?! Cheers

Sorry it's taken ages to reply...
I'm not 100% sure what you're asking. The stereo wires are plugged from the Express to the AUX ports in the stereo(... but I don't think you're asking that! Are you?!)

Similar Messages

  • HT3728 I do not need another wireless network but want to use the airport express for printer access only.  Can this be done and how?

    I do not need another wireless network but want to use the airport express for printer access only.  Can this be done and how?

    You can configure the AirPort Expess to "Join a wireless network" and enable the Ethernet port so that Ethernet devices will be able to connect.
    In order to print from the iOS devices, you will need to have an application like Printopia installed on your Mac. The Mac must be active when you want to print.
    More details here: Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...
    There is a free trial available for Printopia, so make sure that it will work before you buy the AirPort Express.

  • Can I use The Airport Express as a router only. Need your help

    Hi there,
    I need to get some help from anyone for a good wireless router for a MacBook Pro. I want to know if anyone had a Airport Express as a router only of some help in this matter.
    Hope to get your feedback. Thanks
    From Samantha Kellar

    Can you explain a bit more?
    The Apple Express is a router. The new Apple Express has a LAN port so you can have a device on a wired connection.
    Are you talking about removing the modem and only having the Airport Express?

  • I just set up a wireless network using an airport express. How can you change the network name

    How can you change the name of a wireless network set up with an airport express

    Yes, you can. If you use the current AirPort Express, Apple says that you can connect up to 50 devices. Realistically, make that 25-30 or so before the speed really begins to drop.
    Remember that you will have to reset the modem though, before you connect it to the AirPort Express as the modem "remembers" the settings for your computer.

  • I'm using my airport express so I can control stereo via iPhone/iPad. It's linked to my router wirelessly (via "join network" setting). It works fine for a while, but then airplay ability / icon always disappears.

    My airport express is brand new and has latest software.
    My router is an Engenius 300N, and is 6 months old.
    iPhone is a 5S and has latest software.
    I've tried restarting router, resetting Airport, and spoken with apple support.
    The only thing that works is turning power to Airport off and on, but this only works for 5 minutes then disappears again.
    Help please
    Matt

    Oh - and also disappears from other devices eg macbook and ipad.
    thanks

  • Can I use the Airport Express to create a secure wireless network in a wireless-only hotel?

    Can I use the Airport Express to log onto an unsecured hotel wireless network, without an ethernet cable, to create a secure wireless network for my MacbookAir, IPad, IPhone, etc.? If so, how is that done?

    will the Airport Express allow you to log onto a hotel wireless network, and broadcast a secure wireless network in your room for your wireless devices, like the Ipad, Iphone, etc.?
    The bottom line with a single AirPort Express is no.
    The AirPort Express can only "extend" a wireless network when the network is being provided by another Apple router.
    As you might imagine, it is extremely unlikely that that the hotel network....which no doubt uses professional wireless access points provided by a manufacturer of commercial systems.....would be compatible with an AirPort Express.
    In many years of travel domestically and internationally, I cannot recall a time when a single AirPort Express would "extend" the signal provided by a hotel's wireless network.
    However, if you had two AirPort Express devices handy, you might be able to configure one to "join" the hotel network and provide an Ethernet signal to the second AirPort Express, which would be configured to "create" your own "private"  wireless network.

  • Hi, I`d like to connect my Ipad wirelessly to a stereo to listen to my music from the iTunes library on streaming, but also to movies online, games, Goear-) and so on.  I guess I can do that using an Airport express connected to the stereo and via airplay

    Hi, I`d like to connect my Ipad wirelessly to a stereo to listen to my music from the iTunes library on streaming, but also to movies online, games, Goear…) and so on.  I guess I can do that using an Airport express connected to the stereo and via airplay to my Ipad. My question is, can I listen to all the audio that come out from the ipad (movies online, games, Goear…) or only to the music from iTunes library? I`d appreciate any help. Alex.

    My question is, can I listen to all the audio that come out from the ipad (movies online, games, Goear…) or only to the music from iTunes library?
    On the iPad you can stream videos, photos, or music from the Video, Photos, Music, and YouTube apps to an Apple TV OR just stream music to an AirPort Express Base Station.

  • Can I use the airport express as a repeater/range expander but without being connected to the modem with the ethernet cable?

    I have a mac pro (2010 mid) to set up the airport

    My 2003 Airport Extreme I guess does not provide this "enable extension of other Wireless Device" option in Airport Untility under "Wireless",  because it is too old?
    Correct. You will need one of the "square" AirPort Extreme versions if you want to do this.
    Another question, do I need to buy a new Airport Extreme to be able to extend my Wi-Fi signal with the New Airport Express I just bought?
    Yes, or another new AirPort Express. But, you cannot connect a hard drive to an AirPort Express. You can with an AirPort Extreme in case you were planning to add a hard drive.
    One last question, I believe I understood that if I have the new Airport Extreme and use it with my Airport Express to extend the Wi-Fi Signal, I will be able to do this without my DSL Ethernet cable connected to the Airport Express?
    The DSL cable will need to be connected to the AirPort that you designate as the "main" router on the network....assuming that you want to be able to connect to the Internet.
    The other AirPort will connect using wireless only....assuming that it is located where it can get a good wireless signal.

  • Can i use an airport express as an ethernet print server?

    here's my situation: i have a belkin wireless g router connected to my cable modem and my G4 desktop connected to the belkin router. i need to access an epson 3000 printer with only an ethernet port in another room in the house. i was told my the tech guy in the local apple store that i could use an airport express to do this but for the life of me i can't make it happen using either airport setup assistant or airport admin utility. so is it possible? and if not, what would you suggest i do so i can access the printer?
    thanks.

    Can I use an Airport Express as a wired client to an Airport Extreme?
    Sure, follow the instructions in this Apple Support document and simply substitute the AirPort Express where you see a second AirPort Extreme:
    http://support.apple.com/kb/HT4260

  • Can I use an Airport Express to extend a network using a Bwrg500 router?

    Can I use my Airport Express to extend my wireless network while using a Bountiful BWRG500 wireless router? The Bountiful wireless router has the WDS abilities.
    http://www.bountifulwifi.com/Products/BountifulRouter500G/Overview.aspx
    Thank you for looking.

    It is in fact possible to extend your network using WDS. I say this under the assumption that your statement regarding the WDS capabilities of the Bwrg router is correct. However, keep in mind that you cannot use a WPA or WPA2 password with a WDS extended network. You must either use no encryption or use WEP. Unfortunately some routers require WEP passwords that use either 10 or 26 digits ONLY while the express uses a 13 digit password.
    This can be a troubling problem considering that most people need a wifi password to ensure safe and secure browsing.

  • Can I use an airport express to extend a Cisco E4200 802.11n or 802.11g wireless network?

    Can I use an Airport Express to extend a Cisco E4200 802.11n or 802.11g wireless network?  I'd like to improve access in a dead spot with an airport express. I know I can connect this wayt for airplay, but how about extending the signal?
    Thx! ACB

    Apple's "extend a wireless network" function appears to be a proprietary feature that works only with other Apple AirPort routers. As far as we know, this feature is not compatible with devices from other manufacturers.
    It would be extremely unlikely that the Express could do what you want, but some things are never known until  you try.

  • Can i use an airport express as both a bridge and for airtunes?

    I have an Airport Extreme Base Station (5th gen) and an Airport Express. The Airport Express is currently set up only for Airtunes. I would like to use it to extend my existing wifi signal to the backyard. Do I have to use the Airport Express EITHER for Airtunes OR as a bridge, or can I do both simultaneously?

    The AirPort Express can be configured for the following uses simultaneously:  extend a wireless network, AirTunes, and printing. Here I am assuming that you will be using a wireless connection between the AirPort Extreme and AirPort Express.
    Hopefully, your AirPort Express is the newer "n" wireless version, because this will provide the best network performance, and it is also easy to configure as well.
    As to whether you will have adequate signal strength in the back yard, that is difficult to predict in advance. A lot will depend on the distance that the Express is located from the AirPort Extreme, how many walls and obstructions are in the signal path, and how much of the backyard area that you intend to cover.

  • I have the airport express as router can I buy the new airport express and use my old airport to extend my net?

    I have the airport express as router can I buy the new airport express and extend my net?

    Things can get confusing pretty quickly since there are 3 different versions of the AirPort Express.
    If by "old", you mean you have Model No A1084 or A1088 AirPort Express (look at the label on the side of the device for the Model No), it cannot be used with the "Extend a wireless network" feature of other newer Apple routers.
    If your AirPort Extreme is "square" shaped with rounded corners, then the "old" AirPort Express will not work with your AirPort Extreme using the "Extend a wireless network" settings.
    You could use a "previous version" AirPort Express, Model No A1264 to "Extend", or the "new" AirPort Express, Model No A1392, for that purpose.
    If your AirPort Extreme is a simultaneous dual band product, then the "new" Express would be able to "extend" both bands.  The "previous" AirPort Express (Model A1264) would be able to extend only one band, since it is not a dual band device.

  • My wifi is not too strong in one room, can I use an Airport Express to boost the signal?

    I have an Airport Base Station but the signal is only one or two bars at one end of my house. Can I use an Airport Express to boost the signal?
    Also the AE I have is an older model and I can't get Mountain Lion to talk to it. How can I get around this?

    Also the AE I have is an older model and I can't get Mountain Lion to talk to it. How can I get around this?
    You might want to look over this article:
    http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

  • HT1515 Can I use two Airport Express, one being the connection to my Internet Provider and the second one, being an extension to my wifi?

    I would like to know if with them I could use one Airport Express as the connection point to my ISP and the second one, just to extend the wifi range. Anyone knows about this ?

    Yes you can.
    But, remember that the AirPort Express is a router only. It does not have a modem on board, so you will need a modem to connect to your ISP.
    Then, connect one Express to the modem and configure it to "create" a wireless network".
    Configure the second Express to "extend" a wireless network.

Maybe you are looking for

  • Hp officejet pro 8500a plus pump motor stalled

    Does anyone have a detailed fix fo the "pump motor stalled" error?  I went through the multiple steps provided by HP with the last item being "have it serviced".  Surely there is a solution I can implement.

  • LMS 3.2(solaris 10) - User Tracking: again "ogs_server_urn" Not found! errors

    LMS 3.2 on a solaris 10 server that had problems with ctm_config.txt in the past (https://supportforums.cisco.com/thread/2033941) now again has problems with the device selctor in UT. There are FATAL errors of the below type logged to CampusOGSServer

  • Time Machine in Lion

    Does anyone know if Apple is working to fix Time Machine working with NAS drives? My Time Machine used to work seamlessly well with a WD NAS and now it stopped working altogether. Does anyone know if this is a temporary situation or will apple stop T

  • Give helpdesk ability to restart ALL SERVICES without making them local or domain administrators

    I have a windows server 2012 environment using Active directory.  I need to give my helpdesk group the ability to stop, start or restart all services on the machines located within an OU, but I do not want to make them local admins because I don't wa

  • Ok,  i will seek help one more time...mail

    ever since i installed leopard, mail crashes on startup when included in login items. it starts up, shows the inbox, the disk churns, it crashes. it always works find on restart or if i start it after the login process has completed. why???