Using 2 gigabit switches on Airport Extreme N

I'm really trying to work around the 10/100 LAN ports of the AEn and am using a Gigabit switch in order to allow my GigE Mac Pro, Intel Mac Mini, Macbook and ReadyNAS NV connections to each other (thus maxminizing network transfer speeds).
The problem is I have the ReadyNAS in another room (noise) plus needed to run more wired Ethernet to an Xbox 360. In order to save multiple cable runs, this is how I'm set up:
[ Airport Extreme ] in the office
LAN port hooked to Netgear GigE switch
|
|
[Netgear 8 port GigE switch GS108] in the office
ports hooked to:
- Mac Pro
- Intel Mac Mini
- MacBook
- cable through office wall to laundry room, connected to Dlink 5 port GigE switch
|
== wall to laundry room ====
|
[Dlink 5 port GigE DGS-1005D] in laundry room
- ReadyNAS NV
- Another server Dell PC
- Xbox 360 (via cable through another wall to gym)
Questions:
Does this configuration make each GigE capabale device send data to others at GigE speeds (eg. MacPro to ReadyNAS, MacPro to Mac Mini, etc)?
Is there any latency or collisions caused by this configuration? I just seems to me that the ReadyNAS works much slower when hooked to the other switch vs directly to the Linksys switch but I don't have a formal testing program. Note both switches report they are Jumbo frame compatable and all gigE devices are lighting up as GigE on the switches, and all are connected with cat5e cable.
Thanks...
- Steve
MacPro Mac OS X (10.4.9)

Does this configuration make each GigE
capabale device send data to others at GigE speeds
(eg. MacPro to ReadyNAS, MacPro to Mac Mini,
etc)?
Yes, they are all Gigabit, but if you have multiple transfers going on at once, you are limited to the speed of the backplane of the switch.
Is
there any latency or collisions caused by this
configuration?
Prehaps a crossover cable between the switches would help. In the old days you would have had to do that, but the ports are now figuring it out on their own. It might just be more efficent go by a crossover cable (looks just like a ethernet cable but has one of the internal pairs crossed, I think- that's the idea anyway.)
Many, Many. Mac OS X (10.4.9) Full time tech.

Similar Messages

Adding Two Gigabit Switches to Airport Extreme

I want to add an 8-port D-Link gigabit switch to my brand new Airport Extreme to network my Mac Pro, my iMac and two printers in the office. The MacBook Pro would run wirelessly. Then, I want to add a 5-port switch 100-feet away (and down another floor) to directly wire the Apple TV, the DSS tuner, the blu-ray player and maybe use my older non-n Airport Extreme to radiate in that far away room also. Sound like a plan to you wizards? :--) Or am I nuts. Using gigbit cables.

Nope just get a small ethernet to go from one of the 4 hookups on the AE to go to the switch.

Can I use my iPad with airport extreme to retrieve files from a USB connected hard drive?

Can I use my iPad with airport extreme to retrieve files from a USB connected hard drive?

Yes, I believe so. Please check out the NetPortal app. I don't have an iPad, but I use it on my iPod Touch to access files on my Time Capsule. It is available from the iTunes App Store.

Is it possible to use time capsule or airport extreme as a wireless hard drive for iphone?

Is it possible to use time capsule or airport extreme as a wireless hard drive for iphone.
I would like to strem movies from the hard drive to iphone.
I have already seen the Goflex Stellite, which works this way.
Is there any other device that could do this?

I did a typo. My current computer is a 2010 1/2 iMac. The stand alone monitors are still out of my price range so I'm looking for other options. By buying an external hard drive and a broken iMac, I'm still ahead. Still, if I understand you right, the 27" 2010 and earlier iMacs would be possiblities.
Are there adapters that would allow me to run a 2011 and newer iMac as an external monitor from my 2010 1/2. There are so many adapters out there these days.

Can I boost the DSL signal using my 1st Generation Airport Extreme or Express? Also, can I get wireless printing?

Can I boost the DSL signal using my 1st Generation Airport Extreme or Express?
I just moved into a house where they have ATT DSL and it is really slow in my room. I am hoping that I don't have to purchase a booster and I might be able to use my Airport Extreme or Express to boost it. I don't think they want my Extreme as their router, though. They are PC.
I am also hoping that I can set up a wireless printing situation in my room using the Express or Extreme.
I am running 10.4.11 on my old MacBook Pro laptop, 10.5.something on my old desktop (MacMini).
Thanks for any help ahead of time,
Carole

Can I boost the DSL signal using my 1st Generation Airport Extreme or Express?
I just moved into a house where they have ATT DSL and it is really slow in my room. I am hoping that I don't have to purchase a booster and I might be able to use my Airport Extreme or Express to boost it.
Unfortunately, this won't work especially if you want the connection between the routers to be wireless. The two are just not compatible for configuring an extended network. However, it could work if you can have them interconnected by wire. In that case, you could configure them into a roaming network.
I don't think they want my Extreme as their router, though. They are PC.
This shouldn't be an issue as the AirPorts support wireless clients regardless of which operating system they are running.

What type of repeater should I use with my new Airport Extreme?

what type of repeater should I use with my new Airport Extreme? Thanks.

If you want to repeat both bands of your dual band AirPort Extreme, another AirPort Extreme would meet these requirements.
If you only need to extend one of the bands that the AriPort Extreme provides, then an Airport Express would do that nicely.

What ADSL modem do you advise to use with my new airport extreme? I have tried a basic TP-Link ADSL2 modem and I can't get the configuration working. What modem does Apple recommend?

I am having problems setting up airport extreme.
What ADSL modem do you advise to use with my new airport extreme? I have tried a basic TP-Link ADSL2+ modem and I can't get the configuration working. What modem does Apple recommend?

Ok well I have looked around some more and have found this to be the most up to date official response to my question as seen at this link here:
http://www.actiontec.com/support/product_details.php?pid=41#q27
Can I Bridge the Actiontec MI424WR router that Verizon provided, when I signed up for FiOS service?
The MI424WR does not have a bridging option, and neither Verizon nor Actiontec support attempting to bridge it.
The desire to bridge the MI424WR is based on a misunderstanding that it is a modem as well as a router. Actiontec does produce DSL Gateways that have a Transparent-Bridging option, which bypasses or disables the router function and allows the Gateway to act simply as a DSL modem, when it is enabled. Many consumers do not realize that with FiOS, the ONT (typically outside the home) is the device that handles changing the FiOS signal from Fiber to either Ethernet or Coax, and that the Router is just a Router, and if it was bridged or bypassed, it would be a device without a function. For most Verizon FiOS customers their service would completely stop if the MI424WR was bridged, because the Video on Demand service is dependent on it to work.
If your ONT is connected to the Actiontec MI424WR router via Coax, the MI424WR is required due to the Coax connection. But if the ONT is connected to the MI424WR via Ethernet, then in most cases some other router can be substituted for the MI424WR, and it can be removed."
So it looks like I will be calling Verizon support to see about getting the Ethernet connection installed and getting another modem...

Can i use my old round airport extreme as a WiFi extension?

i have my new airport extreme plugged into the modem via ethernet and wish to extend its WiFi network in my house using the older round airport extreme.
is this possible, and if so how do i configure this?
thanks all - T

It will depend on if this "older round" AirPort is an 802.11b or 802.11g model. If it is an 802.11g version, then yes you could use it to create a WDS extended network.

Using a router or switch with Airport Extreme

I currently have an Airport Extreme 5th generation working great for my home network! My ISP Modem (on ground floor "Level-B" of 3 story house including basement) attaches to the Airport Extreme via an ethernet cable into the WAN port. Then each of the 3 LAN ports is in use:
#1 going to my "main Mac" - MBP-13" just a few feet from the Airport Extreme in my lower level basement office (Level-A)
#2 going upstairs to a non-WiFi eMac (Feb 2005) - that's on Level-C
#3 going to my Canon MP640 printer/scanner so that I can use it for scanning (it is attached via USB to the Airport Extreme but that does not permit scanning) This is located next to my MBP on Level-A
OK but now I want to try to get my 1997 LaserWriter 12/640 PS (works great!) (and I have 2 expensive toner cartridges left!) set-up and I have some instructions on how to do this. It will likely necessitate me having my Mac Pro G4-733 running OS 9.2.2 and the LW 12/640 both connected to my network via ethernet cables. That's 5 connections and I only have 3 ports going out.
But I do own a D-Link DIR-635 router and also an 8 port Peabird 8 por 10/100 Switch. Can I use either of these to do the setup?
OR - can I simply unplug the MP640 printer and the eMac for an hour or so that it will take to configure (if I can) the LW 12/640?
OK but then if I do configure it, I won't need the G4-733 Power PC any longer, but I will want the LW 12/640 as part of my network so will at least need a 4th ethernet port at that time. Do I then need to attach the router (or switch) and then connect the LW12/640 (and something else as the router or switch will use up one of the 3 Airport Extreme ethernet LAN ports…)
Thanks for any comments on how to proceed here.
Best regards,
Steve Schulte
Monday 14 January 2013

Still have not found time to try to connect the Apple LaserWriter 12/640 but it is on my list-- have gotten that list down to just a few items--- so making progress!
Now how to get my Apple Stock…………
Best regards,
Steve Schulte
Thursday 24 January 2013

How can I connect to Internet when there is a Gigabyte switch after Airport Extreme?

I have a new Airport Extreme Base station. I have a wired home network set up through out the house. After the Airport Extreme, I have two gigabyte switches. I can connect to the network after the switch, but not the internet. I have also purchased new switches just to make sure this was not the problem. I connected the cable that goes into the switch into my laptop and was able to connect, however after the switch I still cannot connect. Wireless work fine. I need the wired connection for my DirecTv, X-box, Sony Bluray, etc. If it helps I have Comcast with a Motorola SB6120 Modem. Any suggestions as to how I can get connected?

Hi - I have only dealt with one question like this - it was with a different modem but it also had the new hi-speed technology and they were trying to connect the base station like you are with a new gigabit switch - the bad news is that no matter how many resets and reboots and different brand switches and cables were used, it wouldn't work - I told them to contact both the modem and the switch manufacturers but I haven't heard the outcome - maybe one of the gurus will weigh in an fill in the blanks.
Charlie

How do I add a hub or switch to Airport Extreme?

Hi gang-
I have the 802.11g Airport Extreme. It has only the one Ethernet-out LAN port, and I'd like to add more ports to expand my wired network. What is the best way to do this? Do I plug in a router or hub or just a simple switch? Any tips on how to configure this?
Thanks!
Dave

I suggest going with an 4-8 port Ethernet switch ... something like the Linksys EZXS55W or any similar model from another vendor. Just connect an Ethernet cable from the AEBS's LAN port to either the Uplink port (if the switch uses one) or any available port on the switch.

What are the best settings to use for the newest AirPort Extreme (AC wifi) with my optimum online service provider?

I have the current generation of the AirPort Extreme and a handful of devices that utilize the new 5Ghz A/C frequency. My internet speeds were blazing fast when I had first set it up but lately it has been lagging terribly. I was told that changing my dhcp did help, which it did it seems like it might be back to its normal speeds but I just want to know what are the best settings to configure for the airport so that I can get the most out of my service on all my devices? I'm using a CAT 6 cable which does help, I have a guest wifi setup with a wifi password which I understand will slow it down a little. Can anyone just point me in the right direction or just give me a step by step guide on what settings to configure? Should I really consider turning off the guest network?

I am assuming that you are looking to configure your network to provide the highest level of bandwidth possible for your network clients. If that is the case, the following are a few things to consider:
The Internet modem should support Gigabit Ethernet. That is the Ethernet connection between the modem and your 802.11ac AirPort Extreme should be Gigabit Ethernet.
Use CAT-5e or CAT-6 Ethernet cables between all wired connections.
Only expect 802.11ac performance with 802.11ac clients in the same room as the base station.
Eliminate or significantly reduce any forms of Wi-Fi interference on both the 2.4 & 5 GHz bands.
When streaming, especially HD video on your local network, use wired connections between the host and player devices when possible.
Other than the above suggestions there are no "magic" settings that you can make on your AirPort. Note: The Guest network shares the same bandwidth as the "main" network. Unless you have a network goal to provide this type of network, it is best left disabled.

When i plug my network switch into airport extreme it affects my wireless operation

I have a gigabit wired network with a 16 port unmanaged switch. I have a TWC cable modem, connected to the AE Tower. When I plug my wired network into one of the LAN ports on the AE, I can no longer connect to the internet. I have my Extreme set to "Create a wireless network" and it's connected to the router via DHCP and NAT. When I disconnect my wired network, I can once again access the internet.
The switch seems to be operating correctly, I can see and access my other computer when it connected to the router. I can't seem to determine why connecting the wired network causes the loss of internet connectivity.

Temporarily, disconnect the switch.
Restart the AirPort Extreme
Temporarily, turn off the wireless on a laptop and connect the laptop directly to the Ethernet port on the AirPort Extreme. Check to see if you can get a good Internet connection that way.
Then, test the other 2 Ethernet ports on the AirPort Extreme the same way.
What happens?

My devices not automatically switching between Airport Extreme and Airport Express in extended network

I have setup an extended network in my home using an Airport Extreme and an Airport Express. The Extreme is connected directly to the FiOS modem and the Express is being used as the extender. The nework is setup fine, but my devices (MBA, iPhone, iPad) are not switching base stations when the signal becomes poor on the one it's connected to. For example, I am upstairs with my MBA and a great signal as I am connected to the Express. When I move downstairs to where the Extreme is setup, the Wi-Fi connection becomes poor even though I am litterally sitting next to the Extreme. To force it to connect to the Extreme, I need to shutoff the Wi-Fi on the MBA and turn back on. At this point, the MBA will connect to the Extreme with a excellent signal.
Any thoughts on why the MBA is not automatically switching?
Thanks for the help!
Brian

The first troubleshooting step for any kind of network "issue" is a complete power cycle of the network. This gives everything a "fresh start" with new connections.
Power off the entire network.....all devices....in any order you want
Wait a minute or two
Start the modem/router first, and let it run a full minute
Start the AirPort Extreme next and let it run a full minute
Keep starting devices one at a time about a minute apart until the entire network is back up
Check the network again with the MBA and report on your results
Do not worry about the iPhone and iPad....they are pretty much hopeless as far as automatically switching from one access point to another....but the MBA should if it is working correctly.

Can you extend a wifi network using a 2nd wired Airport Extreme ?

Hi
my cable broadbank service enters one corner of my house via a router/modem that I have running in modem mode.
I then have a ethernet cable to a new Airport Extreme (my primary router) next to it that I am using to create a Wifi network (with the same name for 2.4GHz and 5GHz)
I need to get a strong a signal as possible to opposite corners of the house.
At the moment I have a 2nd Airport Extreme (my secondary router) in the opposite corner of the house which Extends the network from the first router.
This AE also has some devices in the same room connected to it by ethernet.
Thise devices are getting very patchy internet service.
I have speeds over 100Mbps available close to my primary router, and around 7 Mbps next to the secondary.
I also have an unused ethernet cable running from the room with the primary router to a room near to the secondary router.
My question:
If I plugged my secondary router into that ethernet cable (into it's input socket) and the other end to the output of the primary router: would I be able to use the secondary router to extend the same Wifi network that the primary was broadcasting ? Or would I end up having to create a completely new network (and then worry about mobile devices switching between them when you move around the house).
Followup question:
If the idea above doesn't pan out - would I typically be better off stationing the secondary router in the middle of the house to extend the network range - or in a far corner as it currently is ?
thanks in advance.
Christian.

If I plugged my secondary router into that ethernet cable (into it's input socket) and the other end to the output of the primary router: would I be able to use the secondary router to extend the same Wifi network that the primary was broadcasting ?
Yes. Apple's set up wizard calls this "extend using Ethernet". Since there is virtually no signal loss through the Ethernet cable, the second AirPort Extreme will receive a much faster signal to extend.
If the idea above doesn't pan out - would I typically be better off stationing the secondary router in the middle of the house to extend the network range
Yes. As it stands, the wireless signal has really slowed down a great deal by the time that it reaches the far end of the house. And, the Extreme can only wirelessly extend the speed of signal that it receives from the "main" Extreme. It can make the signal that it receives stronger, but it cannot make the signal go faster.
So, locating the second Extreme about half way between the "main" Extreme and far end of the house would be the best compromise. The network speed will still slow by at least half when you do it this way, and any obstructions in the signal path will slow the signal even more.
It is easy to see why extending using Ethernet.....if possible.....provides much better performance for the network.

Using 2 gigabit switches on Airport Extreme N

Similar Messages

Maybe you are looking for