Using 2 ipods on same pc

My dad has an existing 30GB ipod and has a lot of music in his library. I just bought a 30GB ipod for myself. When I connected it, all of the music in my dad's library was copied to my ipod. However, I can not access it from itunes. The text appears grayed out for all songs. The songs will play on my ipod, though. I downloaded a video using my user name on the music store, but I can not drag it from the purchased playlist to my ipod, but my dad can. All of his song info appears in black, not gray.
What is required to use 2 ipods on the same computer?

You must select "manually manage songs and playlists" for your iPod preferences.
Open iTunes preferences. Mac users: From the iTunes menu, choose Preferences. Windows users: On the Edit menu, click Preferences.
In the resulting dialog, click the iPod tab, then click the Music tab in the iPod pane.
Select the "Manually manage songs and playlists" radio button.

Similar Messages

  • Can more than one ipod touch be used on the same computer

    Have a new iPod touch-4th gen.  Have  iTunes already on computer, for a 3rd gen.  Updated to lastest version of iTunes.  New iPod is not showing up at all anywhere. 

    More than one ipod on same computer is possible: http://support.apple.com/kb/HT1495
    See if this helps in getting the other recognized in itunes:http://www.apple.com/support/ipodtouch/assistant/itunes/

  • Registering multiple iPods on same computer

    I currently have a 4G 2nd generation iPod that is registered to our computer. My husband just received a 4th generation iPod. Can you register multiple iPods onto the same computer?
    My other question is if you purchase a used iPod, how do you register that and is there anything else we should consider when looking at purchasing a used iPod?
    Thanks for any help.

    Can you register multiple iPods onto the same computer?
    Yes. Register each iPod as if it was the only iPod being used on that computer.
    My other question is if you purchase a used iPod, how do you register that
    If iTunes doesn't give you the option of registering it, click here and fill out the forms.
    and is there anything else we should consider when looking at purchasing a used iPod?
    Restore it when you connect it to the computer.
    (37330)

  • Buletooth is not working in ipod touch 4g. When i want to connect my i pod touch with my friend ipod touch same 4g we can not able to connect.

    Buletooth is not working in ipod touch 4g. When i want to connect my i pod touch with my friend ipod touch same 4g we can not able to connect.

    The BT profiles on the iPod do not support direct iPod-to-iPod use.  There are apps that support peer-to-peer gaming between iPods and maybe transfer like for photos.  Also see:
    iPhone, iPad, iPod touch: Supported Bluetooth profiles

  • I have 2 ipods on same account( 2 different kids in household) how can I separate them into 2 different accounts?se

    I have 2 ipods on same account( 2 different kids in household) how can I separate them into 2 different accounts?

    There are actually a few methods for using more than one iPod on a single computer: How To Use Multiple iPods with One Computer
    Just to summarise what's in the link above:
    Method one is to have two Mac or Windows user accounts which by definition would give you two completely separate libraries.
    Method two is to set your preferences so that either one or both iPods get updated with only certain playlists within one library. If you've had no success with this you can have a look through the guide on this page: Loading songs onto iPod automatically
    Another option when using a single library is to set one or both of the iPods to manual update: Managing content manually on iPod
    You can read about Windows user accounts here: Using Windows XP User Accounts

  • I bought a used ipod touch 4th gen. how do I add it to my account?

    Hi I bought a used Ipod Touch (4th). It was wiped clean when I got it except it had the prev. owners apple Id still on it when we went to download an app.so I went in sign it out. then created a new acct with it under my apple Id. I have an Iphone 4 (the ipod is for my Daughter).I can download apps, Music etc. But when I do, I get an email from apple saying a device has downloaded a song etc. that is not recognized with my acct.I also when I plug it in to my laptop it does nothing, does not show up on my device list, no pop up to add it,no DING nothing.I take and plug in my Iphone(using the same cord) and Ding there it is..Anyone know how to add this new one to my act so I can use itunes on my pc. and not get the emails?  Also it has been updated to the IOS 4.3.4..Thnxs

    take it to apple store and schedule genius bar appointment.  your iPod is still under warrenty because that version is not even a year old.  They should replace it.  Good Luck!

  • Seperate libraries for two ipods on same computer

    how can i set up seperate libraries for two ipods on same computer . running xp . after installing software for second ipod , i only have one version of itunes ,with only one library .tried setting up seperate playlists but that didnt help . thanks for help!

    The only way I know to have two entirely separate iTunes libraries on one computer is to have two Windows or Mac user accounts: How To Use Multiple iPods with One Computer

  • How do I add a used ipod to my itunes, i already have an itunes account for my ipad?

    how do I add a used ipod to my itunes, i already have an itunes account for my ipad?

    Just set it up using the same Apple ID/iTunes account.

  • IPod shuffle 2nd gen not recognized in Mac either Finder or iTunes (but is detected and works perfectly fine on Windows)... i tried using iPod Reset Utility, but no luck...

    i've been working on this for the past few days, and still no luck... iPod Shuffle 2nd generation (i know it's old).... not detected in my home MacBook... but works perfectly fine on Windows....
    i tried using iPod Reset Utility, soooo many times... and i only had twice the luck of having it formatted... but even though it is formatted, it still isn't recognized in iTunes or even in Finder.... other than the 2 times of having it formatted using iPod Reset Utility, i had seen all the reuslts, like: Error ressetting the ipod blah blah: iPod has been reset, keep plugged in, until reset is completed blah blah: iPod has been reset, unplug and replug your iPod blah blah... etc, i have seen all the possible effects of iPod Reset Utility, but still no luck getting it recognized in iTunes or Finder....
    and then , i tried connecting it to a windows computer (but i didn't restore it from there, and just ejected it from windows iTunes), after ejecting it from windows, and then connecting it to Mac, it worked miraculuosly.... perfectly synced and able to put music and listen to them... ejected iPod... after a few minutes, i wanted to add some other music, but when i connected it again, Bam!!!! not working again... even after connecting to windows, it didn't work anymore... guess the magic trick has been doomed...
    i badly need help... puhlease...  (^_^)

    Hey, I hear ya and can sympathize. I have the same
    issue. The difference is that my computer can "see"
    my ipod but it refuses to show up in itunes itself;
    therefore, I can't put anything on the ipod (from the
    computer) and vice-versa. Apple support is clueless.
    This is very frustrating to say the least. Itunes
    keeps telling me that my ipod is synced to a
    "different" computer, which isn't true. It's the
    same computer. The difference is that when I first
    got the 'pod and used it with this computer (and
    everything worked fine), I was running XP. I
    installed Vista and after that, all the problems
    started. If I ever get this resolved, believe me,
    I'll post something here.
    I'm guessing that somehow, itunes "sees" what
    computer it's hooked to by "looking" at something in
    the OS. Change the OS and it "thinks" it's seeing a
    "different" computer.
    Try reformatting it.

  • Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message

    Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
    Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
    http://support.apple.com/kb/HT2292
    http://support.apple.com/kb/TS1369
    http://support.apple.com/kb/HT1923
    http://en.kioskea.net/forum/affich-17997-ipod-not-detected

    I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
    This article was one of the ones you linked to above in your initial post
    http://support.apple.com/kb/TS1369
    Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears?  That appears to be your situation.
    Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again.  If you can get it to work again initially, before doing anything else, try the following.  Select the shuffle in the iTunes sidebar, under DEVICES.  Over to the right, go to the Summary tab.  By default, the checkbox for Enable disk use should be unchecked.  If so, check it and Apply the change.  See if that makes any difference. 
    (If Enable disk use was already checked, try unchecking it and Apply the change.  Basically, set it the "other way" and see if there is any improvement.)
    NOTE:  When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
    If the disk use change makes a difference, that may provide a clue about the actual cause.

  • Using ipod nano with car stereo?

    sorry if this is a blonde question, but I have just got a new (to me) car which has a sony gtx cd300 stero in with an ipod connection. Ive bought a new ipod nano, plug it in, nano says "OK to disconnect". stereo display does not seem to recognise. Dont suppose anyone can advise me? Nano works fine on its own. stereo works fine as cd and tuner, just cant get it to work with the ipod? arrgh! Very very grateful for any help or advice. Kind regards Lindsay

    As long as your headset is 3.5 mm jack, you can use it with your ipod. Same goes with an auxilliary cable to your car if it is not bluetooth enabled.

  • Using iPod as a flash drive between PC and Mac help!

    Hey guys,
    I have no idea how can I make my iPod a flash drive. Well, it was fine when my school used G4 iMacs last week. But now it's all HP pcs. And I cannot transfer my files to those computers anymore. When I plug my iPod via USB to one of them computer, it says that I will need to format the disk drive (iPod) because it cannot read the file system.
    I guess it is because of my iPod is always connected to Macs (including mine) so that the file format on the iPod is unreadable to PCs. So I have no idea what to do because I am scared of that PC is going to ruin my iPod hard drive and its OS. I tried plugging it to a PC at my house, same thing happened. I am too scared to try.
    Do you guys have any idea?
    Thank you in advance,
    Ton

    Probably the easiest way to use an iPod on both Mac and Windows computers is to format the iPod (using iPod Updater) using the PC. This will force your iPod to use the Windows file system (FAT32) which both the Mac and PC can read from and write to without the help of additional software. Of course then all your software updates for the iPod will have to be done on Windows.
    If you need to use a Mac (HFS+) formatted iPod on a Windows PC, you'll need to install some 3rd party software such as XPlay 2.0 (which you can get from MediaFour Software). This will enable your Windows PC to read a Mac-formatted iPod.

  • Using ipod as external drive

    Notice by apple:
    Do not format iPod to erase songs or playlists
    Do not use a disk utility program, such as Disk Utility, Drive Setup, or Windows Explorer, to erase iPod. Erasing songs from iPod this way can disable its music playing capabilities and you may have to update or restore iPod to get it to work again.
    Okay, So If I want to use the ipod as an external drive and I use explorer to copy files to ipod and erase the same way, there should be no problem right? I think what they are talking about is the actual files that are encoded that ipod copies and puts in organized directories...
    Anyone tried coping exe files or other files using ipod as a hard drive? Why? I wanted to copy itunes to the ipod for when I travel to another location to just copy that program to the hard drive and install there to a computer w/o internet connnection...
      Windows XP Pro  

    Put the iPod into Disk Mode and you can copy any files to the HD. Music files copied this way will not be able to be played on the iPod, though. Always transfer music via iTunes.
    It will just take up space that could be used by music files (but that's pretty obvious).
    You should have little problem doing what you propose.

  • Can I use iPod for time machine back up?

    I have several iPods that I don't use, and would like to use them as time machine back up drives, for multiple computers.
    They are 30gb iPod videos. I am aware they aren't as reliable as an actual external hard drive and that this much read/write can cause the iPod to burn out, but for these purposes I don't care.
    I have 300 computers that I want to restore to one master, as they are all used for the same purpose, but currently they all have OS 10.5.x of varying versions. I currently use a time machine backup on an external hard drive to restore the systems, but I have 15 iPod videos, and I would like to use 2-3 of them, to speed the process up.
    I use carbon copy cloner once I get a system restored, to restore the stations around it, but time machine is about 15% faster than using CCC, so I would like to use these iPods to increase my ability to restore these systems on a regular basis without having to buy external hard drives or enclosures to make external HDs.
    I have tried:
    Erasing the iPod in disk utility.
    -It will erase the volume as HFS+ (extended journaled) but it won't erase the main device as it shows in Disk utility, it consistently stays as Fat32.
    --Same idea if I recreate the partition. I tried GUID partition scheme, Apple Partition Map and Master boot record, but all produce the same result.
    I also selected the iPod and attempted a zero-out of the whole iPod using the security options in disk utility. The system still will not let me use it for time machine.
    Has anyone been able to use an iPod for backup? Are there any other techniques anyone can suggest to get this iPod to work?
    Thanks for your help.

    And to clarify, originally I made sure disk usage was enabled on the iPod.
    I have also tried dragging and dropping the contents of a time machine backup to the iPod, but it's still not seen as a backup volume. I suspect there are some hidden files that enable a volume as time machine capable. Any ideas on how to maybe copy the hidden files or any other methods that might work?

  • Can I use ipod touch 5th to mirror my screen on Apple TV via Airplay with out wifi connection?

    Can I use ipod touch 5th to mirror my screen on Apple TV via Airplay with out wifi connection?

    Welcome to the Apple Community.
    Peer-to-peer AirPlay
    With peer-to-peer AirPlay, your iOS device and Apple TV don't need to be on the same Wi-Fi network. If you have one of these products, you can use peer-to-peer AirPlay:
    * iPhone 5 or later, iPad (3rd generation or later), iPad mini, or iPod touch (5th generation) using iOS 8 or later.
    * Apple TV (3rd generation rev A, model A1469 or later) with Apple TV software 7.0 or later. Find out which Apple TV model you have.
    To use peer-to-peer AirPlay, your iOS device needs to have both Wi-Fi and Bluetooth turned on.

  • Using IPod on more than one machine

    Does anyone know the process to authorize more than one computer to play and recognize an ipod's library? I want to use my ipod on my home computer and work one as well? I want to keep the same library and not lose anything.
    Anyone know how to do this? Please help.
    Thanks,
    Lazz
      Windows XP  

    "Does anyone know the process to authorize more than one computer to play and recognize an ipod's library?"
    You don't need to authorise a computer to use an iPod on it. If you want to connect and use an iPod on more than one computer you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply. Once your iPod is set to manual you can connect it to other computers and other iTunes libraries without the message that it is linked to another library:
    Using iPod with Multiple computers
    Managing content manually on iPod

Maybe you are looking for

  • Apple TV - Deleting an incomplete direct HD Movie download - error (-50)

    Purchased 2 movies at the same time - HD Movie format direct to my Apple TV. One downloaded and watched OK, the other had a download error (-50) and every time I try re-downloading it ( on both the "resume" and "check for downloads"areas) , same erro

  • Can i create a button that links to the slideshow widget

    I am creating a portfolio site for a class. It is a one page site, One of my sections is going to be my "work" section. I want to categorize my work, So I have made buttons that pertain to each category of work. Is there anyway that I can link this t

  • How to get support for research work from oracle?

    sir i want to undergo a research from a univ at my city on db security and cryptography.i may require some document and psudo code of certain algorithim.how to get those from oracle? regards

  • Duplicate pages in script printing

    The requirement is to print purchase order. I have output type created using tcode NACE.One Zform is assigned to the output type created in NACE. I need to make changes in Zform in such a way that same pages should be printed again. How can I achieve

  • Automatic restart of SAP J2EE Engine

    Dear Experts, We have a 2004s server. Once in a while the server automatically restarts. When i checked the J2EE Engine tab in NWDS, the SDM, dispatcher and server0 all have a flag called automatic restart and it is set to YES. How do i set them to N