Using 2 monitors. I can't get my Layers Pallet to move to the 2nd monitor

I'm using 2 monitors. I can't get my Layers Pallet to move to the 2nd monitor screen. It is simply locked to the right side of my 1st monitor. A solution would be great. Sorry if it's a noob question.
Thanks for your time.
Monty

No problem. We've all had newbie questions at one time or another.
However, I am going to have to put on my clairvoyant hat and guess you are running Photoshop 10.0.1 (CS3). :/
In CS3, do NOT attempt to move the palette well, i.e. the dark gray zone above the palettes. That you cannot move.
Instead, grab each palette individually by the light gray bar just at the top of each palette.

Similar Messages

  • HT202213 When using home sharing, can you access your itunes files while traveling on the 2nd and 3rd ipads?

    If we use home sharing for a new ipad, can we cet to itunes with the ipad while we are away from home?

    No.
    Homesharing is for local area network over wifi only.

  • Windows 10 shows the 2nd monitor has 1920x1080 but actually it is 50% less around 1080x840

    The resolution of the 2nd monitor, a Vizio VF551XVT 55-inch 1920x1080 HDTV connected through HDMI cable, shows 1920x1080 (Recommended) on the Windows 10’s Display Screen Resolution setting utility but the true resolution of the 2nd monitor is less than 50%; around 1080x840. All applications on the 2nd monitor displayed their header & boarder frames twice wider on screen, which waste/occupy lots of the 2nd monitor’s display area. Please advise how to correct this critical lower than the set/expected resolution problem of th 2nd monitor.  Thanks. The 1st/primary monitor in this case is a mobile PC Display (1920x1080), Lenovo Z710 Intel i7 4710MQ notebook with NVIDIA 840M GPU. Previously running under the Windows 8.1 OS with the same configuration, the 2nd monitor resolution was also displayed incorrectly but just initially right after the Windows 8.1 reboot, i.e. 2nd monitor shows 1920x1080 resolution but actually the 2nd monitor is about the same as Windows 10, the actual resolution is much/50% fewer than 1920x1080. However, the resolution of the 2nd monitor (HDTV) under Windows 8.1 can be corrected (worked around) by switching the main display from 1st to 2nd monitor, then switching main display back from 2nd to 1st, but such Win 8.1 work around doesn't work for Windows 10 OS . Also, please advise whether Lenovo, MS Windows or NVIDIA is responsible for the displays re-position issue. The re-position issue is, when a TV, PC, shared 2nd monitor is disconnected to watching TV, etc., Windows OS currently moves all the display positions, both active and minimized displays, from 2nd monitor to 1st/main monitor, but ideally would be just moving/re-position the active displays to the main/1st monitor and maintain/leave those minimized display positions intact, so when 2nd monitor reconnects back (done watching TV), user doesn’t need to re-align all the displays back to 2nd monitor again. Thanks for helps. 

    If you won't lose anything and if it is not a big hassle, I would re-install.
    Mainly because Win 10 TP is, after all, a beta OS. Too many possibilities of bugs and glitches. It is better off to reinstall.
    The latest build 9879 has a ISO download link. Use the ISO and burn it to a bootable DVd. Then use the DVD to do a clean reinstall.
    http://windows.microsoft.com/en-us/windows/preview-iso-update?os=win10

  • Have entrourage and want to use Mail. Can't get it to work.

    I had a macbook and purchased the Microsoft office for Mac which included Entrourage.
    I have now purchased a new macbook Pro and want to begin to use Mail rather than Entrourage. 
    I have Entrourage on my new computer but i can't get it to transfer my information to the the Mail program
    I am on Charter.net at my office and sbcglobal.net at home.
    How can i get this to work.  I can receive on Mail, but i can't send.

    check your outgoing port settings and make sure it's using a specific port and not the default port, also you might want to check to see if it is using SSL, TLS or any other encryption.  Verify the setting from your old machine setup.

  • How can i use my tv as the 2nd monitor

    hi, how can i use my tv as the 2nd monitor, for example pull a video from desktop to tv for windows7, the computer is hp omni 120 all in one. because i have a cable for it that connects to the tv but i dont know how to connect the pc to the tv. i tried to go on the 'change screen resolutions' but that didnt help. thanks

    Hi,
    Here is it specs:
       http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03343048#N1221
    You can only see:
    Front:
    1 - Screen area
    2 - Microphone array
    3 - Webcam camera
    4 - Stand
    5 - Speakers
    Back:
    1 - Optical disk drive (actually right)
    2 - Stand
    3 - Kensington lock slot
    4 - Power button
    5 - Memory card reader and other I/O on left side
    6 - Motherboard back I/Os (specific I/Os are model dependent)
    7 - Activity indicator
    8 - Power connector
    9 - LAN (ethernet)
    10 - Four USB 2.0 ports
    11- Audio port (actually left side)
    Left:
    1 - Hard drive activity indicator
    2 - Memory card reader activity indicator
    3 - Memory card reader
    4 - Two USB 2.0 ports
    5 - Microphone jack
    6 - Audio port
    Right:
    1 - Optical disc drive
    The only hope is "6 - Motherboard back I/Os (specific I/Os are model dependent)" area:
    Please check area 6 above. As mentioned in my previous reply: Most likely your machine has no video out port.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • After years of owning all things Mac, I am finally trying to use iChat, and can't get it to work. I see my buddy, but all I can do is send a message--the video and audio chat icons are gray, as is inviting to a video chat under Buddies.

    After years of owning all things Mac, I am finally trying to use iChat, and can't get it to work. I am using gmail, and I see my buddy (no camera icon next to her name), but all I can do is send a message--the video and audio chat icons are gray, as is inviting to a video chat under Buddies. My buddy has the same problem as I.  We are able to do video chat through gmail, but I had hoped to use iChat.  I am using OS 10.6.8, iChat v. 5.0.3.  What am I missing?

    HI,
    iChat will Video chat to another iChat in a Jabber Buddy List (Google run a Jabber server for GoogleTalk)
    However it will not Video to the Web Page login to iGoogle or the Web Mail Page login.  (where people can Google Chat as it were in a  Web Browser).
    Nor does it video to the Google Talk Stand alone app for PCs or any other Jabber apps on any platform.
    iChat uses a connection Process called SIP (Session Initiation Protocol) which is also used by other VoIP devices.
    Jabber/XMPP invited the Jingle Protocol for Jabber Applications.
    Google have included this in their Standalone app and the Plug-in for Web Browsers on both PCs and Mac (you can get this as a Standalone Plug-in or as part of Chrome)
    More on this here  This article has been changed several time in the recent months.  It now claims a greater involvement by Google in writing the Jingle Library (Although now Google's version does not work with the others)
    This tends to mean that using the web Login to Google to Chat also cannot video chat to other Jabber apps that are using Jingle.
    If your Buddy is using iChat then check the Video Menu has two items to Enable Camera/Video chat and Microphone/Audio chats are ticked.
    In the View Menu the Show Status Items should be ticked (Selecting them toggles the tick and the function On or Off)
    It could be Internet speed but at this stage I would doubt this at this stage.
    10:27 PM      Saturday; January 21, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • TS1702 I have ePub documents that won't open using iBooks, how can i get them formatted so that I can use them

    I have ePub documents that won't open using iBooks, how can i get them formatted so that I can use them

    You could try downloading a program called Calibre.  It is very good at converting files between formats.  I use it all the time to convert PDF's from work to read on iTunes when I don't want to have to keep zooming in and out to read the actual text. 
    I know that iBooks will read PDF's but they can get pretty squashed down some times. Especially if the original font was small to begin with.  So I run them through Calibre and then email them to my phone and open them in iBooks. 

  • I used the location app to find my daughters ipod with my ipad mini.  App worked great, but now I can't use my ipad, can't get rid of the alerte "ipod located".  Now what do I do

    I used the location app to find my daughters ipod with my ipad mini.  App worked great, but now I can't use my ipad, can't get rid of the alerte "ipod located".  Now what do I do

    Try a reset:
    Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

  • Used CS6 for a year or more, now says it's not registered! I have 1 or 2 unused keys but do not want to use them. Can't get the CS6 applications to open to enter the codes I was given when I first registered them...

    Used CS6 for a year or more, now says it's not registered! I have 1 or 2 unused keys but do not want to use them. Can't get the CS6 applications to open to enter the codes I was given when I first registered them...

    You'll need to use web chat. This file shows you links to Web Chat:
    Adobe ID, sign in, and account help

  • I'm trying to export my masters to use in Lightroom, can't get the ratings to export. Tried writing the IPTC to masters and exporting with an IPTC4XMP file, no luck. These are all .jpg files. The ratings export OK if I export the versions. Any suggestions

    I'm trying to export my Aperture masters to use in Lightroom, can't get the ratings to export. Tried writing the IPTC data to the masters and adding the IPTC4XMP file when exporting, neither worked. The ratings show up in Lightroom if I export the versions. These are all .jpg's that I am exporting. Any ideas on how to fix this?
    Thanks

    There are two problems here:
    1) Aperture does not modify its "original" files on export.  Meaning with the JPEG files that Aperture will NOT modify them, and it will not write IPTC data to them.  It exports the XMP sidecar files, as you're seeing.
    2) Adobe will NOT read IPTC sidecar files for non-RAW images.  So if it sees a JPEG file, it will not look for an XMP sidecar file.  It just doesn't read them, so the data won't be imported by Lightroom.
    If you are using JPEG files, then probably the solution is to check the box in Aperture to tell it to write XMP metadata to the original files.  They're not RAW files, so they're not proprietary in any way, so writing the XMP metadata to the JPEG files is probably pretty safe.

  • I have an ipad2 with 3G Verizon  for use in India can I get Vodafone service for a month

    I have I pad 2 with WIFI and 3G Verizon . For use in India can I get Vodafone service for a month.

    The Verizon iPads are CDMA based, they don't use micro-sim cards unlike the AT&T models - they are different 3G technologies. I don't know whether there are any CDMA-based carriers in India, if not then you could try getting a mifi device and use a sim card in that to give you internet access on the iPad

  • App keeps crashing, unable to use.  How can I get a refund?

    App keeps crashing, unable to use.  How can I get a refund?

    Is there any storage room left on your device? If not, have you tried clearing it?

  • After I used bluetooth I can't get my apps to open, any suggestions? I have already reset settings without success.

    After I used bluetooth I can't get my apps to open, any suggestions? I have already reset settings without success.

    ChrisJ4203, I just tried that and magic...back up and running. Thank you from Wildwatercolors.

  • How can I get all tracks from an album into the album in my library?

    When importing the albums from a folder, the tracks for some of the albums were split up.  How can I get them in one?

    Hello JudyD276
    The article below will give the steps to get the songs grouped together for you.
    Why aren't songs with the same album art grouped together?
    http://support.apple.com/kb/TS1468
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • My friend synced a video to my ipod but it erased all my data on my ipod,but i cant figure out how to load my old libray back without deleting the movie. my friend cant tell me the password. How can I get my old library back without deleting the movie?

    My friend synced a video to my ipod but it earased all my data on my ipod,but I can't figure out how to load my old library back without deleting the movie. My friend shares a family account so she can't tell me the password. How can i get my old library back without deleting the movie?

    Linnwarner wrote:
    She does have the right because she bought the movie.
    Not true at all.
    You only buy the right to your own personal use.
    You do NOT have the right to distribute to others.
    This is illegal.  There is no doubt about it

Maybe you are looking for

  • Custom XML IP PHONE text on "Your current options" and softphone button on

    Custom XML IP PHONE text on "Your current options" and softphone button on call manager 7.0 call manager 7.0 ?

  • Msvcr80 missing & error 7 windows error 126

    I now have "msvcr80" missing along with "error 7 (windows error 126)" after iTunes update, Apple, I now require a fix from you, you caused it, you fix it. And no, I don't want to delete and re-install every Apple product..... Get on it!

  • Auto Refresh work items in POWL iview

    Hi Experts, We are using EP 7.3 and ECC 6.0 EHP 5. MSS add-on 1.0 We are using MSS Inbox as POWL. When we processed any work item in Inbox, the same work item still appearing (after approve) in inbox. When we click on "Refresh" link the approved work

  • FrameMaker 9 - URL's not linked and/or not updated in .pdf output

    I'm editing (or trying to) a .book that someone else (former tech writer at work) created.  I can find the URL references (markers) and have updated them and/or updated the commands in them as best I can tell.  (As best I can tell meaning that I see

  • Reconciliation accounts of customer and vendors

    Dear all, We need to post within the journal an initial value on various account numbers, among which there are reconciliation accounts of customers and vendors. The idea is to make these accounts not reconciliation accounts but just temporarily. As