Using 24p footage and 60i footage together?

Hello,
I am working on a project that will combine 24p footage and 60i footage. What would be the best way to go about combining these two. It's for a short that is shot similar to Cloverfield. I want to use 60i footage for the hand held footage shoot by the actors who are capturing their experience. I'd prefer to have that footage shot on 24p as well and degrade the quality in post, but I don't want to run the risk of them dropping my DVX100a and destroying it. I don't have any experience with 60i, or combining two kinds of footage, so advice is much appreciated!
Thanks!

> that they are not true 30p but really 60i rendered to 30p
Well, I certainly can't speak for all of these cameras, but I have played around with some of this "30p over 60i" footage -- but most of this was from HDV cameras, not AVCHD. Avoid if you can. Basically, the luma is progressive and the chroma is interlaced.
I have a function (it's actually part of the dv2film and hd2sd functions) that will deinterlace only the chroma, so can recover greatly true progressive output... but this is an unmitigated a pain in the *** to deal with all the time, and you certainly lose at least a little chroma resolution. Avoid :)

Similar Messages

Can I use bluetooth speakers and wired speakers together

Can I use bluetooth speakers and wired speakers together?

You should be able to listen to your music in iTunes through the Bluetooth speakers. If, after buying the speakers, you can't select them in iTunes, just go to System Preferences > Sound > Output, and choose the Bluetooth speakers

How can i use the SNMP and TCP/IP together in Labview?

I want to use the SNMP and TCP/IP together in the Labview to communicate between the two computers, If anyone know about it , please write back.
Santosh Chavan
IIT MADRAS.

You can use LabVIEWs UDP functions to communicate with SNMP devices. The tedious part is converting the MIB information into the required hex message.
There is also a problem in using the UDP functions on port 161 (default SNMP port) if the Windows SNMP services is running.

Ipad will not turn on the screen is just black, using the hone and power buttom together does not fix it

my ipad screen is blue, using the home and power buttons together do not fix it.

If you can't reset it by holding the power and home buttons at the same time until you see the Apple logo, then releasing, connect it to your charger for at least 15 minutes then try resetting it again If it won't reset make an appointment with the Genius bar at a nearby Apple store to have it looked at.

Can i use JSF tags and HTML tages Together

i am trying to use html and JSf tages together. i hope it should owrk. but for me html tags are not working.
can any one help me

thanks
its working but i have one more clarification
can we wuse jsf tags in javascript
for examp
this my javascript using html
newQuotCell1[0].innerHTML='<input type=text class=TextField name="nameofEmployer'+count1+'">';
if i want to write a jsf tage there . does it allow
i want to bind the textfield with bean value . Is it possibel.
please let me know.
thansk in advance

Using Aperture 3 and iPhoto '11 together

I was wondering how to use them together. I spent a lot of time on Aperture 3 for geotagging every photos + faces and, trying to import them back to iPhoto '11, means losing all those info and start back again.
I was wondering if there's a way for keeping the main library on Aperture 3 but being able to work on it through iPhoto '11.

Aperture and iPhoto are entirely different applications that work in very different ways.
The only communication between the two is as follows:
Aperture is able to parse the iPhoto Library to allow it to import the contents while stacking the Originals and Modified versions, preserving metadata and so forth.
Aperture can share its Previews with the iLife apps, including iPhoto.
That's it.
So, specifically, what interaction there is between the two is designed to facilitate migration from iPhoto to the more powerful app. After that, iPhoto has exactly the same relationship to the Aperture Library as, say, Pages or iMovie.
for geotagging every photos + faces and, trying to import them back to iPhoto '11, means losing all those info
use an Export preset in Aperture that includes location information. There is no way to share Faces, but you can use it as the basis for keywording.
Regards
TD

How can I use screen lock and auto-logout together?

I'm managing a network of Macbook Pros at an elementary school and would like to use both the screen lock and automatic logout features together, but this does not seem to work for some reason.
What I would like to happen:
After 5 minutes: locked screen
After 30 minutes: automatically logged out
The automatic logout works when I don't have locked screen enabled, but once I turn on locked screen, the account never gets logged out. It does work if I only enable the screen saver to appear after 5 minutes. The computer isn't going to sleep so I'm not sure what is preventing the automatic logout.
Any ideas on how to resolve this issue?

You can use LabVIEWs UDP functions to communicate with SNMP devices. The tedious part is converting the MIB information into the required hex message.
There is also a problem in using the UDP functions on port 161 (default SNMP port) if the Windows SNMP services is running.

How to split an image and use one half and the reverse together?

Dear Forum,
I would like to take face pictures and split the faces in half. After that, I would like to use the left side of the face and match it to the reverse left side face together(having 2 left sides which will look like a normal face after the 2 sides will be brought together).
So:
1. picture of a human face (head)
2. slipt the face in half
3. remove the right side
4. highlight the left side and make a reverse image
5. put together the real left side and the reverse left side in one face
How that is possible with Photoshop?

Thanks ! Sounds easy. I should have posted the question BEFORE the several hours spent trying to figure it out. I appreciate the time and effort.
Joe

Using an iMac and mac air together for iPhoto editing and organisation

I want my iMac and macair to be synced for iPhoto purposes.
I followed this thread and have saved my iPhoto library from the iMac to an external drive.
I assume I can plug the drive into the macair and make changes. Or is it intended that I copy the drive to the macair?
I am having difficulty understanding how the sync of changes on the macair will be reflected on the iMac?
Veronica

One question, how does this affect syncing to iTunes? Will it recognise the iPhoto drive on both computers (depending which one has the drive at that time) if I sync photo albums to my iPhone and iPad?
iTunes will always sync with the last iPhoto library that has been used on the computer. If you make sure, that the drive has been connected, before you launch iTunes, it will work, like Old Toad said.
Also, if I do it this way doesn't it become vulnerable due to not being connected at all times to time machine?
if you use the drive with the library the mainly on your iMac, you could exclude it from the TimeMachine backup of your Laptop. Keep it connected to the iMac, when you are not using it on the LapTop.
What would be the process if I only wanted to do this periodically and wanted to keep the main library on the iMac. Could I work on the drive on the macair and then save it back to the iMac? How do I do that without duplicating the files? If I just select copy and paste, will it only overwrite the changed files?
You would have to copy the entire library back and forth again and again, or use iPhoto Library Manager, to merge the changes into the library on the iMac. It would not be an easy workflow.

Using Smartwatch 3 AND Smartband SWR10 together?

Hi@all,
i´m a new SmartWatch 3 owner since 2 days ans also using a SWR10 from the first day
Is it a problem to use both devices with lifelog? What about the step counter, what device gives the values? Both of them? GPS in the Smartwatch 3 will be used for walking, driving, etc, right?
Logging is enabled in Lifelog App, also both devices are shown in smartwear menu...
Greetings,
SirRobin

As Alex said Your device will only work with one device so if your band is recording sleep and is been logged then that is the dominant device which will record all other info
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Using Gift card and Apple finance together?

Hello,
Short version: Could someone please tell me if its possible to use an apple gift card in conjuction with their Financing to buy a new mac?
Long Version: I wish to buy a new mac on finance, however If I have about £600 of that as a gift card already, is there anyway I can use that first to bring the cost of financing down?
thanks

I don't see why not since you're only financing the amout that you'll actually owe after you apply the proceeds from the gift card. But, why not call Apple and ask? If you live near an Apple Store, why not stop in and ask someone there? You'll most likely get a far more accurate answer than you will on this or any other forum.

Luks use a keyfile and a password together

I was wondering if anyone knew a way to require both a keyfile and password together to unlock an encrypted drive. I've tried googling this issue but I can't seem to get any results other then keyfile vs password.
Thank you for your time

avx wrote:
Encrypting your keyfile via (for example) GPG? To unlock, something like
gpg -d /path/to/keyfile | cryptsetup luksOpen ...
Nice! Thank you.

Using Flash Pro and Flash Builder together | Learn Flash Professional CS5 & CS5.5 | Adobe TV

Adobe Flash Professional CS5 and Adobe Flash Builder 4 enable time-saving workflows. Learn how to develop content in Flash while editing associated ActionScript code in Flash Builder 4, switching easily between the two applications to edit and test.
http://adobe.ly/w50IJm

This doesn't seem to work the same way in CS5.5 / CS6
In the video the class files are associated with the FLA, when you switch back to Flash Pro...
So far, when I follow these steps the classes are not associated with the FLA, the class field for the stage in Flash remains blank.
Also, clicking the edit icon in the properties of a MovieClip and allowing FB to create the file, does not associate the as file with the MovieClip.
Returning to Flash Pro and clicking the Edit button attempt to create a new file once again, but since the file already exists in FB it just remains on the New ActionScript Class dialog, with the Finish Button grayed out (because a file with the same name already exists in FB).
The resulting AS files for a given are created in a sub folder under:
Documents/Adobe Flash Builder 4.6/[Project]/src-[Project]/*.as
Yet the FLA is located in Documents:
Documents/[Project].fla
Should the as files exists with the fla, is a folder reference supposed to be set, or did I miss a step somewhere?
Is a source path supposed to be added to Flash Pro for:
Documents/Adobe Flash Builder 4.6/[Project]
I am currently on a Mac, but noticed the same behavior in Windows at work yesterday.
Thanks,
Josh

How can i use shape tweening and motion tweenin together on a movie clip?(where is looping whitch was in propertise panel in CS5?)

how can show animation (shape and motion tween) witch i was created in Scens1-MovieClip in time line?
there was an option (looping) in CS5 but how can i do it in CC and CS6?

shape tweening can only be applied to raw drawn shapes, no movieclips. IF you wanted to do a shape tween to a movieclip it would have to be done within the timeline in the movieclip.

HOW TO USE LOGICAL AND OR CONDITION TOGETHER

Please do not post subject in ALL CAPITALS
Hi All there,
How to use logical and or condition together
I wanted to use logical AND OR condition together in where clause of Select Query.
eg where xyz and or abc
Regards
Sagar
Edited by: Matt on Mar 17, 2009 1:05 PM
Edited by: Matt on Mar 17, 2009 1:05 PM

hi,
You cannot use the logical and or condition together at the same time in SQL statement. Sachin is correct while using the and and or in the same condition. You can get the data using or condition in SQL statement, and then use the delete statement of internal table using the end condition. please find the following code for the same.
select *
from dtab
where cond1 eq 'A1'
or cond2 eq 'A2'.
if sy-subrc eq 0.
delete itab where cond1 eq 'A1' and 'A2'.
endif.
regards,
Veeresh

Using 24p footage and 60i footage together?

Similar Messages

Maybe you are looking for