Using 2nd Monitor Doesn't Reset When Switching To 1 Monitor Only

FF4 was displayed on my 2nd monitor off of my laptop.
I then powered-down and removed the 2nd monitor hookup.
After rebooting with only the laptop monitor, FF4 opens (twice) with only a tiny window just large-enough to display the red-yellow-green buttons. Fortunately, upon clicking the green button, it expands into a normal window.
Just an FYI.

It's a LacieIIblueIV monitor.
I delieted the files any still doesn't work.
I recall one coworker encountering this before, and he switched the monitor connection to the other output on the graphics card (dual monitor support) and it worked fine for him. Unfortuantely I tried this and still didn't work...

Similar Messages

  • Using Mac OS on multiple monitor is great, but after removing external monitor (2nd monitor) usually windows position originally on the external monitor doesn't get re-positioned to default monitor. Is there any shortcut key or utilities that can reset wi

    Using Mac OS on multiple monitor is great, but after removing external monitor (2nd monitor) usually windows position originally on the external monitor doesn't get re-positioned to default monitor. Is there any shortcut key or utilities that can reset wi

    Got the "apple firewire ntsc" choice to show up even if grayed out and "missing" under "audio/visual" menus by recreating choices in Easy Setup under "final cut pro" MENU thank GOODNESS because I was reading horror stories on here about this under another thread with someone trashing preferences, reinstalling and the works and still not getting it to show up...on my search now for an analog/digital converter up at b&h...find it odd that the s video connector wouldn't show the crt monitor when I put both displays through the 3870...I switched it back to see if it worked again when only the one dell monitor display was there and there it is again mirroring the screen display on my desktop...just can't be seen as an "external monitor" in fcp...couldn't find anything specific in the shane ross threads to this. I'm sad the program doesn't just see the s video connection though the 3870 though my computer does fine and will query up at b&h in regard to what might be affordable as far as a digital/analog converter. It's also weird in itself that when I put the two dell monitors on the one card my computer no longer could see the s video crt connection...makes no sense. Will report in later as to what I discover up at b&h as I'm sure there's a world of people out there using this sony crt monitor still even into the upgrades with computers and software so I imagine therein lies the solution. Thanks again and I'll report in as to what hardware might be suggested for me.

  • I recently upgraded from 4S to 5S. There are 2 games that I wish to transfer to the new device. 1st game isn't available in the Store anymore, so can't download. 2nd game doesn't save when you change devices. How do I get those 2 apps to my new phone? Tnx

    I recently upgraded from 4S to 5S. There are 2 games that I wish to transfer to the new device. 1st game isn't available in the Store anymore, so can't download. 2nd game doesn't save when you change devices. How do I get those 2 apps to my new phone? Can I do that manually through iTunes?
    Thanks!

    Hello jon713,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iTunes: About iOS backups
    http://support.apple.com/kb/ht4946
    App Store Application data (except the Application itself, its tmp, and Caches folder)
    Application settings, preferences, and data, including documents
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    http://support.apple.com/kb/ht1848
    To transfer iTunes Store purchases from your device to a computer, follow these steps:
    Connect your device to the computer. If it is synced with another iTunes library, the following dialog may appear:
    Click the Transfer Purchases button.
    Have a nice day,
    Mario

  • My iTunes keeps freezing when I try to switch from the Summary page to the Podcasts page to try and manage which podcasts I sync to my iPod. It doesn't freeze when I manage anything else, only podcasts.

    My iTunes keeps freezing when I try to switch from the Summary page to the Podcasts page to try and manage which podcasts I sync to my iPod. It doesn't freeze when I manage anything else, only podcasts. I have the latest version if iTunes. I can't figure out why this is happening.

    Hello aczett,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    Best of luck,
    Mario

  • Is it possible to use software limits on 7354 board when switching control modes from open to closed or closed to open loop?

    Is it possible to use software limits on 7354 board when switching control modes from open to closed or closed to open loop?

    Hello Richard,
    When you say 'open loop' and 'closed loop', are you referring to running the application in position and torque mode? If not, how exactly are your controlling a servo motor in open loop? 
    In closed loop mode, the encoder values will be used as reference and the motion VIs can be used to configure the software limit as required. Are you currently losing the software limits? If so, how exactly are you losing these values? I am not sure I understood what exactly is happening with software limits in your program, so any more information on this would be useful. 
    Vivek Nath
    National Instruments
    Applications Engineer
    Machine Vision

  • Lose Dock when switching from External monitor

    When I disconnect my external monitor and open my MacBook monitor the Dock is not visible except when I cursor over the Dock area it's starts to reappear? It's very strange.

    I think the problem revolves around the change of resolution when switching back. Because my Windows for Safari are out of whack too. So I am thinking the Dock is position wrong at first.

  • Access Connections - IP doesn't change when switching locations

    In my Access Connections setup, I have a mix of profiles; some using DHCP & some using static IPs.
    I am experiencing problem when manually switching between profiles, where the IP address is not always changing as expected.
    For example:
    (all profiles are wired connections)
    Home (DHCP)
    IP address: Allocated by DHCP
    Subnet mask: Allocated by DHCP
    Default gateway: 10.0.0.1
    DNS servers: Allocated by DHCP
    Office 1 (Static)
    IP address: 203.18.x.x
    Subnet mask: 255.255.255.240
    Default gateway: 203.18.y.y
    DNS servers: 10.10.140.7, 10.10.140.12, 203.18.z.z
    Office 2 (Static)
    IP address: 10.10.140.202
    Subnet mask: 255.255.255.0
    Default gateway: 10.10.140.1
    DNS servers: 10.10.140.7, 10.10.140.12, 203.18.z.z
    Office 3 (DHCP)
    IP address: Allocated by DHCP
    Subnet mask: Allocated by DHCP
    Default gateway: <blank>
    DNS servers: 10.10.140.7, 10.10.140.12, 203.18.z.z
    On many occasions when switching from, say, "Office 2" to "Home"; the static IP address for Office 2 (10.10.140.202) is not being replaced by a new IP allocated from my home router (which, by the way is configured to allocate IPs from the pool 10.0.0.2 to 10.0.0.4; so the old IP address should not be valid on that network).
    What is even more interesting is when you take DHCP out of the equation, for example when switching from, say, "Office 2" to "Office 1" (both of which are static IP profiles). The IP address 10.10.140.202 (Office 2) should be replaced by the static IP 203.18.x.x (Office 1) in all cases. However on many occasions it is not, and I'm left with the previous IP allocated.
    Has anyone else noticed this behaviour?
    I've found that by switching back and forth between profiles, it eventually resolves itself (although sometimes up to 3 or 4 switches is required).

    AC 4.42 fail to assign a static IP when the OS is in spanish and the wireless device is Intel. In that case the problem was fixed with a patch that the support guys release.
    In your case, I don't know my friend.
    Have you tried using only Windows, without AC?
    Regards

  • Nvidia/nouveau drivers: monitor names are changing when switching

    I am testing nouveau driver for nvidia and switch sometimes back to nvidia driver.
    So far everything is OK, except the monitor names as given by the command output:
    $ xrandr
    DVI-I-0 .....
    DVI-I-1.........
    with the nividia driver I have 0 & 1 as monitor numbers, when I have 1 & 2 with the nouveau driver.
    Is this the expected behavior? If not, how can I have same monitor number with both drivers?
    Thank you for suggestions.

    DSpider, your posts are almost unrelated to what I asked. I've been developing web applications for quite a few years now and I pretty much know where flash is now. Also there are tons of video sites which only support video playback through flash, and tons of tons of sites with some kind of flash content. As for the gaming, as I said I play only 1 game, I won't install windows again just for 1 game. I said goodbye to windows about 6 months ago and don't plan on installing it again. I used to dual boot for the past 5 years though. If you haven't noticed, linux is being heavily discussed by the big companies recently. From your post I conclude what your everyday life is:
    -go to school
    -eventualy go out with friends
    -play games on your pc
    -watch videos only from youtube
    -write unrelated comments in forums :D:D
    -repeat from step 3 or eventually step 2
    And why would you use firefox since its so buggy and slow and not as secure as google-chrome?
    About downloading flash videos, one can do this without the need of external applications
    No offence
    Last edited by raxbg (2012-06-23 17:31:51)

  • Trayer does not Adjust correctly when Switching to External Monitor

    Hello
    I use a laptop with xmonad and xmobar and trayer. When i connect my external monitor via VGA, i set it to primary. My xmobar moves perfectly to the top of my external monitor, with a width of 90% of the screen, as specified in my xmobarrc. However, trayer acts differently. It does move to my external monitor, however, its position overlaps with xmobar, and does not move correctly to the remaining 10% of the screen left by xmobar which i would like trayer to occupy.
    How can i make trayer move correctly?
    Thank you!
    Last edited by fawkes5 (2013-01-09 19:10:51)

    Hello again. If i start my external monitor when i startx (i.e through .xinitrc) then it sets correctly. So its just the dyanmic changing of resolution that trayer has trouble adjusting with.
    Last edited by fawkes5 (2013-01-11 00:35:28)

  • PDFs not displaying properly when switching from multiple monitors to single screen

    OK, here’s one I can’t find online anywhere. When I am at home I use a second monitor on my Macbook. Adobe reader works just fine opening files and displaying them, but if I disconnect the monitor and just go to the single laptop screen, adobe will no longer display the pdf file. Reader stays open and will display the toolbar from the file or files I had open, but it won’t display the actual documents. I have to quit reader and re-open it in order to display my files correctly.
    Any ideas?

    OK, here’s one I can’t find online anywhere. When I am at home I use a second monitor on my Macbook. Adobe reader works just fine opening files and displaying them, but if I disconnect the monitor and just go to the single laptop screen, adobe will no longer display the pdf file. Reader stays open and will display the toolbar from the file or files I had open, but it won’t display the actual documents. I have to quit reader and re-open it in order to display my files correctly.
    Any ideas?

  • Glitch in Audio when switching from Source Monitor to timeine in PPro

    I am running a nMP 3ghz 8-core, 16gb ram, D700's, on osx 10.10. PProCC is 8.2.0 (65) Build. It is the most up to date version on CC. I also have a Focusrite Scarlette 2i2 for my Audio interface. This is where I'm having the issue. When I playback a clip in the source monitor, then go to play something in the timeline I get a weird 2 second delay with 2 pop's in my speakers, the lights on the XLR gain knobs on the focusrite audio interface flash twice in sync with the audio pops, then the timeline will play. And if I now go to play something in the source monitor coming from the timeline it does the same thing, 2 seconds, pops, lights then it plays. But if I stop and start the clip in either the source monitor or timeline without switching between, it plays fine. Only switching between the source monitor and the timeline. I have tried numerous things in the ASIO settings but nothing seems to get rid of this glitch and it drives me and my clients insane because it does it every single time I switch between the two. HELP!

    Cam, I have this exact same problem. I plan on sending out some emails to hopefully find a solution, but I thought I would check here quick. Did you ever find an answer to your question elsewhere?

  • JCo Connection using file.properties doesn't work when deployed

    Hello Experts,
    I'm trying to connect to a SAP backend system using the JCo connection.
    I've tyed with the standard connection, crating dinamically the connection and it works fine:
    mConnection = JCO.createClient("001", // SAP client
    "sap.user", // userid
    "********", // password
    "IT", // language
    "ashost.domain.dom", // application server host name
    "06"); // system number
    mConnection.connect();
    Then I tryed to store the login data in a file 'login.properties' put in the same package of my connection classes.
    The code is:
    String[] logonStr = new String[5];
    Properties properties = new Properties();
    try {
    InputStream is = getClass().getResourceAsStream("login.properties");
    properties.load(is);
    } catch (Exception e) {
    e.printStackTrace();
    logonStr[0] = PropertyManager.getProperty(applicationProperties,"jco.client.client");
    logonStr[1] = PropertyManager.getProperty(applicationProperties,"jco.client.user");
    logonStr[2] = PropertyManager.getProperty(applicationProperties,"jco.client.passwd");
    logonStr[3] = PropertyManager.getProperty(applicationProperties,"jco.client.ashost");
    logonStr[4] = PropertyManager.getProperty(applicationProperties,"jco.client.sysnr");
    mConnection = JCO.createClient(logonStr[0],      // SAP client
    logonStr[1],    // userid
    logonStr[2],    // password
    "IT",           // language
    logonStr[3],    // application server host name
    logonStr[4]);   // system number
    If I test locally this code it works fine and the login datas are extracted from the 'login.properties' file.
    But when I deploy my PAR file in the Portal seems that the 'login.properties' file isn't found by my application...
    Which could be the cause??
    Could it be a permission problem??
    Any Ideas?
    Thanks in Advance,
    Best Regards

    Hi Shyam,
    Thanks for your answer!
    I could use the string "ashost.domain.dom" instead to extract it from the 'login.properties' but I need also the others login info as username and password.
    My problem is that the 'login.properties' file is not found by my application when the PAR file is deployed in the portal...
    I need to know if I need to move the 'login.properties' file in another package or something else...
    Any ideas??
    Have I to declare the .properties file in some configuration file (for example portalapp.xml or somthing similar..) ??
    Best Regards...

  • Windows size doesn't adapt when switching displays

    Hi everyone,
    I have a macbook pro 13" 2012 that I often use with a docking station to plug it to a biger LCD screen. Everything is working perfectly well except that when I plug it off from the docking station, all application that were opened when I was plugged remain with the same size they had on my bigger display.
    What I mean is, for exemple, full screen app will remain full screen but I'll only be able to see half of the windows when I work back on the original 13" screen. I guess this might be due to the fact that my LCD screen has a 1080p resolution while my 13" only have a 720p ? Is there anyway to force mac osx to resize all windows as per new display resolution, keeping the same ratio ?
    Thanks in advance for your help.

    What Mac OS X will do for you is to put at least some part of each window onto the remaining screen -- None are left completely off-screen.
    Sorry, the rest is your problem. Re-size them or minimize them into the Dock before you disconnect the larger display.

  • I already have PS elements 12.  I just installed PS elements 13, but it doesn't open when I go to pictures, only PS Elements 12 opens. Should I uninstall PS elements 12?

    I now use Photoshop Elements 12 on my computer.  I just installed PS Elements 13. But PS 13 icon does not show up on my desktop and when I open a picture, PS Elements 12 opens it.  Should I uninstall PS Elements 12?  If I do, will I lose my pictures?

    You may set PE 13 as default program to open pictures.
    If you are on window Right click on the file which you wish to open and click on propeties.
    Then Right to "open with" click on change and select Photoshop Elemets 13, then click on Ok, Apply.

  • Firefox 32.0.2 - Blank window pops out when switching to "Settings", the only visible elements in it are buttons OK and Cancel.

    Windows 7 Ultimate, FF 32.0.2. Nothing but clickable buttons "OK" and "Cancel" is displayed in the Settings window, while everything else in the browser works as it should.
    You help me solve it? Thank you!

    Turned the Ghostery off, and - voila!
    I guess it isn't a Ghostery bug, though.
    Luckily it don't require to restart the browser. Thank you cor-el.

Maybe you are looking for