Using 3.6.23. When i upgrade, trouble with Lloyds tsb site.

Using 3.6.23. When i upgrade, trouble with Lloyds tsb site. One of my accounts has code like>br all over it. Also when i want to access a specific account it logs me out. Cannot upgrade as cannot use internet banking. Any ideas? edit

After I loaded 5.5, then removed it and loaded 3.6 again, I had no problems.
Then my hard drive died and I installed a new one.
Then I downloaded ONLY 3.6 since I already knew I didn't like the changes that 5.5 had made and the kinks hadn't been ironed out. That was in July.
The hesitation problem started recently, toward the end of Sept. I have wireless cable modem that runs 36-54 mbps but in Sept/Oct I was visiting family and distance from their router sometimes meant running at 12 or 24. I thought the hesitation/lagging was due to that. BUT
Since coming home in mid Oct., although nothing about my home connection has changed, I am finding this lagging/not responding/hesitation problem continues AS IF the connection were slow but router/modem/internet connection are all intact.
This is what made me wonder if anyone else is experiencing this/reporting it to Firefox. Apparently not.

Similar Messages

Having trouble with Tiscali/TalkTalk site when accessed with 'FireFox', can't 'reply' to emails or report 'spam', other functions seem ok

Having trouble with Tiscali/TalkTalk site when accessed with 'FireFox',
can't 'reply' to emails or report 'spam', other functions seem ok
== This happened ==
Every time Firefox opened
== On/Off few months now all time

Try deleting cookies and cache:
1. Tools| Clear recent history
2. Time range to clear: Everything
3. If it isn't already selected, select '''Cookies''' and '''Cache'''
4. '''Clear now'''
<u>Check cookie exceptions</u>
1. Tools | Options | Privacy Panel
2. Set '''Firefox will: Use custom settings for history''' Insure Accept cookies for sites and accept third-party cookies is selected
3. Click '''Exceptions'''. If the misbehaving site is in that list, select it and click '''Remove site'''
Also see [[Updating Firefox]]

I purchased the Cars and Cars 2 bundle using my iPad. When I loged in with iTunes, the movies started to download to my laptop but somehow, I deleted Cars but Cars 2 and the iTunes extras for both are still there. How do I get Cars to download again?

I purchased the Cars and Cars 2 bundle using my iPad 2. When I loged in with iTunes, the movies started to download to my laptop but somehow, I deleted Cars but Cars 2 and the iTunes extras for both are still there. How do I get Cars to download again? Thank you for your help.

By the way, I just purchased this movie last night. I somehow deleted Cars while the other parts of the bundle were still downloading. I tried looking into iClod but I was unable to find a link to download the movie again.

Trouble with sucure web sites

I am having trouble with sucure websites. When I log into a sucure site I can navigate to no more than 3or 4 pages (sometimes as little as 1) and the the web brouser will stop loading. I have tried several brouser and it happens with all of them. I am using a rev B iMac running 10.3.9 hook to the internet via a airport extreem. Help?
rev B iMac Mac OS X (10.3.9)

I was never able to resolve this problem but I have now retired the computer

Anybody having intermittent trouble with Godaddy webmail site?

About every other time I log in to the webmail account I have with Godaddy, the site is frozen, incomplete download, curser will not work, can only log back out. All other websites work properly. Firefox is the only browser I have been using up till now. Does Firefox not support the STMP webmail accounts very well?

i think everyone is over thinking this question i have.... i create a movie in final cut, i notice final cut uses .mov file extensions. my godaddy web site i use, its a pre made template site i use, i have created a page that allowys me to insert video, when i insert the video to the designated area its says godaddy does not allow .mov only uses mpeg,avi,wmv,mpg my question is when creating a project in final cut and it gives you a .mov extension and you need it to be mpeg,avi,wmv,mpg so that it can play on something requiring that, what would you recommend? the site only allowys the file to be 30mb so whatever compression i use, it needs to be able to make the file size to that...h.264 with one pass gets the file size right but again i am understanding the compression aspect but not the file type. i have inserted several files with mpeg extensions that were not created in final cut and they all work fine. I am not getting the web site to recognize the . mov. if you got the prompt can not use .mov must be mpeg,avi,wmv,mpg what would you do.... i have my project in final cut so you can walk me through it as if you had a open project in final cut. i assume it should go step 1. export to: ? and then adjust the different settings ? i noticed that final cut has some mpeg options, and i tried them but it didnt make the files small enough 30mb. is this a matter of converting my file to one that will work or am i needing to export it in a specific manner. Again i have successfully got multiple videos to work that have mpeg extension that were not created in final cut.

Hr2000 firmware upgrade troubles with external triggering mode

Hello,
Has anyone had any problems with the latest Ocean Optics HR2000+ firmware upgrade while using external triggering mode?
I'm using the NI-provided drivers for HR2000+ which used to work without a problem before the driver update. My program synchronizes 3 spectrometers so that they continuously acquire spectra at 1 second integration time while being triggered by a pulse generator running at 20 Hz. It used to be that the specs would trigger again only once the previous integration completed, but now the spectrometers try to trigger with each trigger and don't complete the 1 second integration. My code has not changed at all between firmware upgrades, and I expected it to work exactly the same after the upgrade. I've reinstalled all programs, inf, and sys files related to the driver as well.
Do I have to wait for a new NI-Driver update that adjust to the new firmware update? Attached is the driver package I'm using.
Any clues as to what I can do about this?
Thanks,
Mike
Attachments:
Ocean Optics 2000 4000.zip ‏582 KB

Attached is a sample VI for what we're attempting to do. This used to work before the Ocean Optics firmware update.
Attachments:
specs_with_trig_post_firmware_upgrade.vi ‏57 KB

Im trying to transfer photos from iphone 5 to mac. I successfully transferred pix via ipad mini using iphoto. However, when i try same with iphone, it does not show up as a device in iphoto. Any ideas? CSJ

im trying to transfer photos from iphone to MacPro using iphoto
I successfully did the same with ipad to mac however, trying iphone doesnt work.. it wont show up as a device on mac.
any ideas?
CSJ

Hey Catherine Sian,
Thanks for the question. I understand that you are experiencing issues with your iPhone being recognized in iPhoto. The following resource may provide a solution:
iOS: Unable to import photos to computer
http://support.apple.com/kb/TS3195
Thanks,
Matt M.

Need a recommendation on using the book module ...having trouble with choosing the best template and adjusting text etc.

Having trouble working with photo text box and normal page text boxes. Cannot seem to consistently grab the handles of either and re-size. Is there a good tutorial out there?

Adobe TV is a good place to start. See if these video tutorials help:
Book Creation
http://tv.adobe.com/watch/getting-started-with-adobe-photoshop-lightroom-5/lightroom-5-cre ating-and-publishing-a-book/
Modify Layouts of Images & Text
http://tv.adobe.com/watch/whats-new-in-lightroom-4/modifying-book-layouts-/
Backgrounds & Favorites
http://tv.adobe.com/watch/whats-new-in-lightroom-4/advanced-book-module/

Can not use stored windows credential when running merge agent with agent proxy

I have an account ACCT_A and create a windows credential
CRED_B target to server DISTRIBUTOR_1 (with cmdkey).
And I setup a pull subscription to DISTRIBUTOR_1 and set merge agent run under agent proxy with credential of account
ACCT_A (The sql server agent is running as LocalSystem or Network Service). Then the merge agent job will failed and complain "Failed to connect to distributor
DISTRIBUTOR_1".
However if I change the sql server agent to run as ACCT_A and let merge agent job run as SQL Server Agent Service Account it will successfully connect to distributor
DISTRIBUTOR_1 with credential CRED_B, with other setting unchanged.
Here are the questions:
Is it possible to grant other accounts to access one's stored windows credential in Credential Manager?
I suppose merge agent job will get full security context of ACCT_A when it runs under agent proxy with credential of ACCT_A and should be able to access stored credential CRED_B and
successfully connect to DISTRIBUTOR_1. But nowCRED_B seems can not be accessed by merge agent. Could somebody explain what's the problem here?

Hello,
I am currently looking into this issue and will give you an update as soon as possible.
Thank you for your understanding and support.
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

Upgrade trouble with AT&T

I went in today to upgrade my phone. AT&T says I am eligible but BB says their computer won't allow them to give me an upgrade. Can anyone shed any light on this issue and if there is a way for me to get an upgrade thru BB?

I had the same problem however with verizon. My recommendation is just not try through best buy as no one can answer why and go with your carrier

Trouble with loading some sites...

I'm a new Mac user. On mac there are some website I can't load. For example, when I go to PrincetonReview.com and click on Login, it'll take me to the login page and I'll put in my info, after that it won't load the next page and it'll give me the error "Connection was reset" on Firefox and same thing on Safari.
Same thing when I try to sign up for a free registration at beachbody.com. I can go to the registration page and put in my info, after that it will go to an error page I've mention before on Firefox and Safari.
In the status bar, it seems like it's trying to contact the websites and it's taking a long time before it goes to those error pages.
Also both my browsers are updated.
The pages I can't load in Safari, it's the same on Firefox. When I used my PC, I had no problems loading any websites...please don't make me have to go back to PC.
Any ideas on why I can go to some websites and not all? Thanks!!!

Make sure you have the latest version of Adobe Flash Player:
http://get.adobe.com/flashplayer/

Safari trouble with one particular site

I have a problem with safari when I use one particular website (www.itsagoal.com)
I've noticed that it is the website in particular that may be at fault. The website is www.itsagoal.com and what happens is that the built in clock for that website goes mentally fast. Although I noticed this issue before under 10.4.5, it was never a problem. It didn't affect scrolling, or the fans or anything. It was purely just an asthetic bug. However, now, under 10.4.8 (using safari I must add) it really is a problem.
Everything is fine at the site, until you enter a forum thread. Then the time goes crazy. You can do this without needing to login, here http://www.itsagoal.com/community/forums/viewtopic.php?id=9D9B62088B9CBF508BBBAB 0785D7BA4F
Could somebody please visit those pages and confirm a few things for me.
1. That the time (which is top left of the screen) is fine on any non forum page.
2. That the time does indeed go crazy.
3. Are there any experts amongst you that have seen this before and perhaps know what the problem is with the site?
Many thanks
iLee
p.s. How do I go about debugging this myself so that I can let the developer of the site know whats happening?
Edit: In firefox (and Camino), the time only updates when changing pages and is not a problem at all.

Hi iLee
yes, the clock runs fast for me too using Safari.
What actual problems does it cause you?
If you enable the Debug menu via Terminal or some third part utility. Then use the User-Agent menu item & set it to "MSIE6" ....... this tells the webpage we're using Internet Explorer 6; and seems enough to get the clock behaving normally. Works for me.

Upgrade Problems with 08 - Domain.sites missing

I updates to 08 last night and have observed the following which I think may be problematic:
in Amy/Library/applicationsupport/iweb the file for iweb is still called domain.sites NOT domain.sites2 as is usual with Iweb08
on my hardrive/libary/applicationsupport there is NO FOLDER for Iweb - it is missing
When I launch Iweb from the dock it asks me each time to choose a domain instead of launching automatically? Is this normal?
I cannot import photos into Iweb from my iphoto library..that choice is greyed out...
Help!!

Ambw wrote:
I updates to 08 last night and have observed the following which I think may be problematic:
in Amy/Library/applicationsupport/iweb the file for iweb is still called domain.sites NOT domain.sites2 as is usual with Iweb08
iWeb should ask you if you want to update the Domain file to version 2 when opening it (by selecting it when you are asked to choose or by double-clicking it (or selecting and hit ctrl open with/iWeb)). Then it gets .sites2.
on my hardrive/libary/applicationsupport there is NO FOLDER for Iweb - it is missing
That's normal, the iWeb folder containing the Domain file is only found in the users library which is different from the harddrive library (every user has its own user library, but harddrive library is the same for all the users)
When I launch Iweb from the dock it asks me each time to choose a domain instead of launching automatically? Is this normal?
Actually no, when you launched a Domain file, quit iWeb and reopen it it should open the Domain file you last edited. (unless you moved it in the meanwhile that could be the problem maybe)
I cannot import photos into Iweb from my iphoto library..that choice is greyed out...
No clue sorry
Regards,
Cédric

I have been through all the steps given in help to enable cookies but the site i am trying to log into still says i have to have a cookie enabled browser....i am only having trouble with this one site and it is not blocked

each time i try to log in as a member to this site i get the message that i have to have a cookie enable browser. all other sites seem to be working fine. cookies are enable, have been cleared and i have nothing blocked at all

Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Trouble with mobile phone site

I loaded all files to my host but can't get my desktop website to redirect to my mobile phone design.

Yes, Publish to BC site which would help here.
In Muse click on Publish > Enter a site name ( anything like testsite.com ) > View the site.
http://tv.adobe.com/watch/learn-muse/publishing-your-site-to-business-catalyst/
Thanks,
Sanjit

Using 3.6.23. When i upgrade, trouble with Lloyds tsb site.

Similar Messages

Maybe you are looking for