Using 3230 as a modem--problem!

Hi guys.. A help is needed here...
I am using my 3230 as a gsm modem, to receive messages in an application in java.
But the problem is that only the messages saved under "Sim messages" in the phone are available to read from 3230. So i can work around this if i can enable all incoming messages to be saved in my SIM memory directly.
Can any one help me out doing that ?
Regards

Anyone, pls? I need it urgent.

Similar Messages

Buffering video downlowds via Quicktime, when using a HSDPA USB modem.

Hi,
Does any one else experience very poor streaming performance via Quicktime, when using a HSDPA USB modem. Every time, when using the Quicktime player and receiving data via a HSDPA USB modem, there seems to be minimal buffering of that data, so that the video quality is extremely pixelated and virtually unwatchable; are there settings that can be altered to correct this problem? This issue seems to be so petty, yet Apple is unable to offer a solution? That doesn't seem right?
Regards,
mike_biz

Is this a file that Quicktime PRO is not able to open?
Yes. Your camera's native video format is MPEG-4 and appears to possibly be "muxed" with MP3 audio.
If not, is there anyway that I can convert this file to one that I can use on my Mac?
Try installing the free Flip4Mac component. Then try playing the .asf file in the QT Player.
Is it possible to upload from my camcorder via the included USB cable and convert directly through Quicktime PRO?
If your file plays using the Flip4Mac player component, you may then wish to consider purchasing full conversion codec which will allow you to export your DXG-305V files to any frame-to-frame synchronized QT compatible format in QTPro.
ADDED: Sorry about the duplication, too slow with my response.

Using a dial-up modem

I guess I'm posting this out of sheer desperation, although it sounds like there isn't anything that can be done. I moved to the DC area last November and before signing an 18-month lease, I contacted Verizon directly, and my building also contacted their local Verizon rep to ensure that I would have no problems using a dial-up modem connection. I was very upfront about what I needed the line for and was given every assurance that everything would be fine.
Unfortunately, my fax modem is prone to constant disconnects, and I've been told by Verizon tech support that they can't run copper to the premesis. I need the line to perform closed captioning for television. Closed captioning still uses antequated technology which involves the text of what's being said on the program to be transmitted from my home to the TV station via the phone lines. The modem regularly disconnects at 32 and 37 past the hour -- that's almost guaranteed -- as well as other times.
So long story short, Verizon tells me everything is fine until I sign a lease and sign up for service and tech support basically tells me there's nothing that can be done. It's my livlihood that's on the line and there's nothing I can do about it. If by some miracle someone knows of something I can do to make a data transmission connection stable on fiberoptic lines, I'd be very grateful. I've tried just about every fix I possibly can.
Thanks.

Some people find by changing the error correction settings or speed on the modems, you can improve the reliability of a modem over FiOS voice. Realistically it shouldn't be causing a problem. Have you tried tinkering with the modem's settings if at all possible?
========
The first to bring me 1Gbps Fiber for $30/m wins!

Modem Problem Caused By Verizon Technician

Hi. I'm having a annoying problem. We had a outage 2 days ago. And I couldn't get my modem to sign in. So I called Verizon. Big mistake. And wanted to see if they could help. I usually use my great Actiontec modem. But for Verizon help, I hooked the old Westell 327W modem up. And he couldn't get my internet back. But he sure messed up my password in the PPP Connection Profile area. He took my original password I used to login to Verizon. And gave me a temporally password so the outside person could fix the outage. He told me to leave that password which is "{edited for privacy}". And that is not my login password. But now it must be a permanent password I'm stuck with. It's the only password the modem will use. But when I get to the website I get to use my real password. I want to use my real password at the modem website too. Please can somebody tell me how to get rid of this permanent password the tech guy put on my modem configuration. This is soooo frustrating. Here is a screen shot of the problem. Thank you.

First always ask to speak to an english speaking person, Its a huge difference. I have had service people coming to my house after a rain I loose internet and my phone sounds like popcorn, they keep saying the box on the pole needs to be replaced but they cant do it.Been going on for 2 years. And then i get an email saying its all fixed.Even though there was nothing fixed. Good thing im not paying for fios.There are government agencys that eat this stuff. Like is there a clss action for non service? At the moment.

A30 Modem Problem - Does it work with XP SP2 ?

HAS ANYONE GOT AN A30 (P4 3Ghz) INTERNAL MODEM WORKING WITH XP-SP2 ?
I've recently upgraded the hard disk in my A30 and installed XP SP2 and all the latest Windows updates and found most of the latest working drivers, but the last thing I'm trying to get to work is the modem driver.
Device mangler says the Toshiba Software Modem is installed - i.e. no driver / hardware conflicts etc - but if I try to query the modem from device mangler it cannot communicate and complains of a hardware conflict.
Similarly if I try to use any comms programs to get to the modem they complain 'unable to open COM3 - insufficient resources'
I've tried un-install & re-install different drivers from UK & Canada tosh support sites. The UK ones don't work at all, the Canada ones give the above symptoms.
The UK drivers worked with XP SP1, so my guess is there is a driver issue with XP SP2 - any one else tried it ?

Hi NA-A30-1, have you been able to find a driver yet to work with A30 and XP SP2 or resolve your modem problem otherwise?
I have a very similar problem. After a reinstall on a new hard disk and SP2, I still can't get the modem drivers recognised...
When I run the Modem Driver Installation program it runs for about 5 minutes and then closes as if everything could be ok. When I go to Device Manager, there is still a yellow question mark next to Modems (says "PCI Modem" with a yello question mark sign)...
I tried to search for the inf file, everywhere I could think of but until now, nothing seems to be recognised as the correct driver for this modem...
It would be extremely helpful if someone who has made progress can explain how they got around this problem.
Thank you.

600 and 600e modem problem, and BIOS update

I hope I can find the answers to my 600 and 600e problems here. I've looked over the whole community and can't find the answer to my problems.
BIOS Problem: For some reason I can't update the bios on either machine. I am upgrading from 98 to 2000. I believe I need spsdib54 as a BIOS update. I find IBM laptops rather difficult to update. I have worked on a few computers in my day, but never IBM until now, and the learning curve is hell. I have a floppy drive but can't get the laptop to allow the spsdib54 file to open. I get a remove media message and then hit any key to continue. I'm lost here.and theIBM instructions are no help
MODEM Problem. I am trying to use AOL dialup. I install 2000, and can test my modem on both machines. I install AOL with no problems. Both laptops will dial out and get the correct Phone numbers. When I let AOL use smart connect and try to proceed, I loose all modem activity, and can't get it back even with the Modem upgrade which I have done. ....help

Thomasrwahl wrote:
I hope I can find the answers to my 600 and 600e problems here. I've looked over the whole community and can't find the answer to my problems.
BIOS Problem: For some reason I can't update the bios on either machine. I am upgrading from 98 to 2000. I believe I need spsdib54 as a BIOS update. I find IBM laptops rather difficult to update. I have worked on a few computers in my day, but never IBM until now, and the learning curve is hell. I have a floppy drive but can't get the laptop to allow the spsdib54 file to open. I get a remove media message and then hit any key to continue. I'm lost here.and theIBM instructions are no help
I. Create a System Program Service Diskette:
Download spsdib54.exe (TP 600E: spsdih47.exe or spsdin36.exe - find out here) to your desktop.
Insert a high density floppy disk into the diskette drive.
Double-click the downloaded exe and follow the instructions on the screen.
II. Follow the "Installation Instructions" in spsdib54.txt to update the BIOS:
Installation Instructions
Notes: - You need an AC adapter and a charged battery pack to update
              the system program.
          - If your computer is attached to any kinds of Docking station
             or port replicator, turn off the computer and detach it
            before proceeding.
            - Make sure the SPSD diskette is write protected.
1. Print these instructions or display on another computer.
2. Firmly connect the AC adapter to the computer.
3. Insert the System Program Service Diskette into the diskette drive
    and turn on the computer.
4. Select Read this first from the menu and carefully read the
    information that appears.
5. Press the Esc key to return to the menu.
6. Select Update system program and follow the instruction on
    the screen.
    Warning: Do not turn off or suspend the computer until the update
                   has been completed. IF YOU TURN OFF OR SUSPEND THE
                  COMPUTER WHILE THE UPDATE IS STILL IN PROGRESS, THE
                  SYSTEM BOARD MAY HAVE TO BE REPLACED.
After the update has been completed, do the following to make the
changes effective.
7. Make sure the System Program Service Diskette is removed from
     the diskette drive, then turn off the computer.
8. Press and hold the F1 key, then turn on the computer. Hold the F1
     key until the Easy-Setup menu appears.
9. If a password prompt appears, type the correct password.
10. Select Config, then select Initialize.
11. Select OK to initialize the system.
Run the diagnostics to make sure that the computer runs with no
errors:
12. Turn off the computer, press and hold the F1 key, then turn on
     the computer. Hold the F1 key until the Easy-Setup menu appears.
13. Select Test, then select Start to run all the basic tests.
    Various test patterns will appear on the screen.
     An OK will appear for each device that passes the test.
14. Verify that OK appears for all of the devices tested.
15. Press the Esc key to exit Test and turn off the computer.

Intel iMac with Speedstream 5100 modem - problem with connection

I am running my internet/email using a Speedstream 5100 modem. My service is with SBC Yahoo (dsl line). My modem with stay up for a while and then at some point during the day decide not to work any more. I must turn it off and turn it back on (sometimes 3 or 4 times) to get it to work.
Is anyone else using this modem? Any problems with it? Should I call SBC and ask (or demand) a new modem???
Thanks!

rick,
Still having problems with my imac g4.
I called tech support today and I told them about all the problems that I was having. He had me put the current operating system disk that I was currently running on my computer and he had me run the utility file and nothing found.
Then he had me run the operating system disk that came with the computer but my computer froze up and I could not run it. He told me to take it in for service and that it was a hardware problem. After I hung up with the tech the computer started up and I ran the operating system disk and it said no problems with the hardware.
While the computer was still running,I got on the internet to go to the site that you listed above because I wanted to print a copy of the site to take with me tomorrow.
My computer froze up with 18 repeated lines of errors.
I will be taking it in for services tomorrow.
Will let you know what I find out.
san-da
imac g4 Mac OS X (10.4.7) i also have an i book mac os x 10.4.7
imac g4 Mac OS X (10.4.7) i also have an i book mac os x 10.4.7

KT6V Modem problem

I have a KT6v motherboard. I'm unable to use dial up. I've tried another modem with no change in problem. I can use the onboard nic with no problem. I did have notice the green light on the onboard nic stays on all the time. Even when the nic is disabled in the bios. I even updated the bios. no change. when i try to use a dial up modem the phone line acts like the line is hung open. Like a phone is left off the hook. I've tried 2 modems. Same problem. any ideas?/ Thanks for all replies.

put the modem in a different PCI slot

My mac wont send emails from yahoo or any other websites when using an external USB modem!

My mac wont send emails from yahoo or any other websites when using an external USB modem! I have checked the settings and they seem correct. Can anyone help? I do not have snow leopard. I can log on my email accounts, open my incoming emails (with difficulty coz it asks me to "try again" ) but I can never send emails, I always get: "sending is taking a little long, try again".
What is the problem? this is a hair puller !!!

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)

I am trying to use an external 3g modem made by Huawei model e173s-6 and when I do connect it on my usb port the macbook pro just do not recognize it. I own a 2012 model with mountain lion 10.8.2 . What should I do ?

I am trying to use an external 3g modem made by Huawei model e173s-6 and when I do connect it on my usb port the macbook pro just do not recognize it. I own a 2012 model with mountain lion 10.8.2 . What should I do ?

I still don't know what happened to my test Aperture Library after the update to 3.4...Not only were my previews lost, but so were the original images! Needless to say, I haven't bothered to update the main library on the Mac Pro because I don't want to deal with this level of uncertainty (even with backups in place).

I have been using Elements 12 without a problem for 9 months. Now when I try to open the program, I get an error message "Adobe Photoshop Elements 12 quit unexpectedly" and it will not open at all. What can I do to open the program?

I have been using Elements 12 without a problem for 9 months. Now when I try to open the program, I get an error message "Adobe Photoshop Elements 12 quit unexpectedly" and it will not open at all. What can I do to open the program?

Thank you for responding. Nothing actually worked! After reading the posts online, I called Apple. They indicated they have seen problems with some software after their upgrades. The technician was able to fix the problem on my computer remotely, but I have no clue what he did! But, it was definitely related to their recent upgrade to my computer.

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

HT1206 Lots of info about one user using multiple computers. What about multiple users with separate Apple IDs using same computer? Having problems getting my wifes new iPhone talking to her apple account on the computer we share (2 users)

Lots of info about one user using multiple computers. What about multiple users with separate Apple IDs using same computer? Having problems getting my wifes new iPhone talking to her apple account on the computer we share (2 users)

You need to create a user account for your wife (or yourself depending on who has the current user account). When syncing, each of you should sign in as a separate user, login to iTunes and then sync. I had this problem when my sister got an iPhone. When we did her initial sync, everything on my iPhone showed up on hers. Apple gave me this solution.

My imac and ipad2 will not connect to the internet with Windstream using an 2wire DSL modem.

Help my brand new imac and ipad2 will not connect to the internet with Windstream using an "2WIRE" DSL modem. Windstream tech service is useless. i can connect with the built in router through Ethernet or wireless, but still no connecting to internet, help! windstream said everything is working on their end, yea right. What i do know is that both the mac and ipad work at other places and can connect with wireless connected to the internet, so i know it's not the apple products.
these are brand new machines with lion.
This is my first mac, so I’m still new to how it works, which is not helping either so a detailed help would be great. Please help before my wife losses it
thanks

There is a 2701HG-B, and a 2701HG-D. If not labelled on the modem, ask Windstream which one they presently supply or how to tell the difference.
By the way tell your wife it isn't that bad. At least you have an ethernet DSL modem. There were times where DSL modems had RJ-11, USB, and Ethernet, and all three were used to provide access. At least now only the craziest DSL providers still use those modems.

Can I use a non-FiOS modem for secondary ethernet from FiOS coax

I intend to set up a home theater PC to connect to a TV located in a different room from the current FiOS modem/router (Actiontec MI424). I may use an HTPC 'extender' in the room with the TV, connected by HDMI. However the Ceton Echo extender requires a direct ethernet connection, CAT5 I think. What I'm considering in a few months, when my Verizon contract is up, is to drop all service except high speed internet from Verizon. Then I could use the coax currently connected to the TV instead to connect to a modem or MoCA device which would output CAT5 ethernet to the HTPC extender.
I am not knowledgeable about ethernet and TV signals. From what I can gather, a MoCA connection is preferable to a powerline network and maybe even better than running a long CAT5/CAT6 cable from room to room, which I don't want to do. There is an Actiontec MoCA device available that claims to 'convert' from coax cable internet input to ethernet output. Would this work to supply the Ceton extender using the FiOS coax that currently supplies TV signals to my Verizon set-top box?
Even more preferable to me, I currently have an unused Zoom cable modem/router that is Docsis 3.0 certified and which worked well for Charter internet supplied by coax. It is less than 2 years old. Could I simply use this Zoom modem with the second FiOS coax in the living room, instead of buying a new MoCA device? That would mean I would be simultaneously using two coax-connected modems for ethernet: the Verizon-supplied Actiontec and my own Zoom modem/router. If not, what is different about the MoCA device vs. what a cable modem does?
I think what I don't understand is whether there is a difference in the signal currently available from the coax supplying the TV: is it 'normal' cable TV/internet that the Zoom modem should be able to convert to ethernet, or not? If this is possible, would I need to have Verizon do any configuring of it? I did try to connect it myself and was unable to make an internet connection. How do the providers control whether you receive through the coax ethernet-only or ethernet plus TV. I get that the phone service is just a form of VOIP managed through the Verizon ONT in the basement.
Solved!
Go to Solution.

bob0099 wrote:
What I'm considering in a few months, when my Verizon contract is up, is to drop all service except high speed internet from Verizon. Then I could use the coax currently connected to the TV instead to connect to a modem or MoCA device which would output CAT5 ethernet to the HTPC extender.
MOCA frequencies are above those used for TV and can coexist on the same coax. All you need at the TV is a 1x2 splitter rated 1Ghz or better. One side goes to the TV. The other wide goes to the MOCA adapter.
bob0099 wrote:
From what I can gather, a MoCA connection is preferable to a powerline network and maybe even better than running a long CAT5/CAT6 cable from room to room, which I don't want to do.
A cat5 connection is most preferable. Second the MOCA. Third is powerline networking.
bob0099 wrote:
There is an Actiontec MoCA device available that claims to 'convert' from coax cable internet input to ethernet output. Would this work to supply the Ceton extender using the FiOS coax that currently supplies TV signals to my Verizon set-top box?
There are a number of available MOCA adapters.
What is a MOCA Bridge?
bob0099 wrote:
Even more preferable to me, I currently have an unused Zoom cable modem/router that is Docsis 3.0 certified and which worked well for Charter internet supplied by coax. It is less than 2 years old. Could I simply use this Zoom modem with the second FiOS coax in the living room, instead of buying a new MoCA device?
That Zoom cable modem won't work. MOCA and DOCSIS are two completely different technologies.
BTW, the Actiontec is NOT considered a modem.
bob0099 wrote:
How do the providers control whether you receive through the coax ethernet-only or ethernet plus TV.
VZ can enable or disable any of three services provided by the ONT individually.

Using 3230 as a modem--problem!

Similar Messages

Maybe you are looking for