Using 4 monitors on h8-1020

I have an HD Radeon 6570 video card in this h8-1020 PC. It is only capable of running 3 monitors, I require a 4th. Not for gaming, just for daytrading (running charts). I have tried buying external video cards, however they still limit me to running only 3 monitors. What solutions are available for me to be able to run 4 monitors on this PC?
I would like to be as cost efficient as possible. Is it possible to add another video card?
If not, can I replace this Radeon 6570 with another that can support 4 monitors without spending an arm and a leg/buying a new PC?

Hi,
This HP video adapter might get the job done. Read the reviews and the specifications. I don't know if the AMD Eyefinity software will interfere with this approach or not.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Similar Messages

GroupWise reporting using Monitor in 7.x

Is there a way to get a full report using Monitor that will list all of the GW users and the last time they logged on? The current report in 6.5.6 shows only connected users.
Paul Caron, CNE, MCSE
Maine Medical Center
[email protected]

eyuk. Guess it's time to submit an enhancement for that.
Paul Caron, CNE, MCSE
Maine Medical Center
[email protected]
>>> Danita Zanre<[email protected]> 9/26/2006 11:01:04 AM >>>
Paul Caron wrote:
> Is there a way to get a full report using Monitor that will list all of
> the GW users and the last time they logged on? The current report in
> 6.5.6 shows only connected users.
No the only way to get a "last logged in" number is to run the audit report
in GWCHECK.
Danita Zanre
Novell Support Forums Volunteer
GroupWise 7 Upgrade Guide!
www.caledonia.net/gw7upg.html

Sniffing vlan without using monitor session

Hello,
I am trying to configure sniffing on vlan without using monitor session on 3550 - 122-25.SEB. My idea was to put static mac mapping for all the mac addresses in the vlan to one port where to put IDS sniffing interface. Unfortunately the switch doesn't accept static mapping for mac address that he already knows via dynamic mapping on one and the same vlan. If I first shut down the port where the source device is located then I can put static mapping but after enabeling the port again the switch doesn't lear the dynamic mac. Is there any other way to redirect traffic ? I am thinking also if I can disable mac address learning on this vlan ->turning the switch in to hub for this vlan ?

Your vlan also needs to be configured for remote-span:
vlan 35
remote-span
I would keep the filter attached, if the frame is not "good" it can't do any harm on the destination-system. It typically won't even get there.
And make sure that you don't have too much span-traffic on the interswitch-links and the destination-link.

Error while creating PO using monitor shopping cart

Hi all,
We are facing one issue while creating the PO in SRM using the monitor shopping cart node. The system is throwing an error message stating that u201CEnter Tax Codeu201D because of this we are not able to proceed further. Can anyone knows why this error message is showing. I debugged the code but I couldnu2019t find out from where this message is triggering. Which BADI / FM is called up at this point giving this error message..?
Any point on this will highly appreciated .
Thanks in Advance .
Regards,
Mahesh Mohan D

Hi Mahesh
Does your business has practice to enter a tax details in basic data of sc since this below configuration brings the tax settings in shopping for all type of shopping carts
SPRO>Supplier Relationship Management>SRM Server>Cross-Application Basic Settings>Tax Calculation-->Determine System for Tax Calculation - What is the existing settings?
if it so the basic data , you can find tax details otherwise not.
if there is a setting like no tax determination, you need to check the given vendor data whether ERS is flaged or not.
since ERS flag equires tax data.
regards
Muthu

Using Monitor to Watch DVD

I recently got a Samsung monitor which I use to hook up to my macbook. I usually use it as my only screen, but there are times that I want to watch a DVD and work at the same time. I am trying to figure out how to get either Front Row or the DVD player to work full screen on my monitor while I have word or some other program open on my macbook screen. I have it set up so that my monitor is arranged above my macbook screen. I can get the DVD to play full screen on the top, and I have programs open below on my macbook screen, but anytime I click on the macbook screen, my DVD player leaves full screen and goes to a tiny window. I don't know how much sense that made. Any suggestions?

Front Row won't work at all like that. You can't use the "full screen" mode of the DVD Player application without it being the front-most application. But, you can set the DVD Player to "maximum size" with the window in the other screen and continue to work on the MacBook's screen.
-Doug

Using monitor through tape deck

I want to use an LCD tv I have for an external video monitor. I have a Sony HVR-M15 deck connected by fire wire to my Mac. I have RCA, S-video and Component outputs on the deck. I can playback tapes on the external LCD monitor through the deck but how do I use it as a Full quality playback monitor in FCP?

I can playback tapes on the external LCD monitor through the deck but how do I use it as a Full quality playback monitor in FCP?
Isn't that what you're doing already?
-DH

Full Screen Playback Control Impossible Using Monitor 2 in Dual Monitor

Recent iTunes update (patch didn't fix) causes playback control to disappear when the cursor is on the monitor showing the movie. Controls reappear when cursor is moved to first monitor. User cannot get the cursor near the control panel. Must drop out of full screen playback to touch controls with the cursor.

Isn't there a SINGLE MONITOR option in COLOR? Use that.
I don't think two graphics cards will work with Color, as Color relies on the card when it comes time to render. Might mess it up, or not work.
Shane

How to exclude UNDO and temp tablespace using monitoring template

hi,
as per MOS note id 816920.1 undo and temp tablespace is excluded from monitoring starting version 11G onwards.It says that thresholds will need to be explicitly set if undo and temp needs to be monitored
we have grid 12C implemented now with monitoring templates which sets thresholds for all tablespaces. does it apply that thresholds to undo and temp too?? we are receiving alerts for undo and temp tablespaces and we wish to disable them. We have undo tablespaces with different names in many databases as per naming conventions for that line of business.
How can i exclude undo and temp tablespaces from monitoring using grid 12C monitoring templates. is there a way through templates where i can set thresholds of permanent tablespaces only???

In EM12c, go to the 'Enterprise' menu, then 'Job', then 'Library'. There should be an out-of-the-box job called "DISABLE TABLESPACE USED (%) ALERTS FOR UNDO AND TEMP TABLESPACES" that you can run against your database targets, and that job will disable database-generated alerts.
If a previous admin has set up EM12c-generated alerts for undo and temp, then yes, a monitoring template will take care of disabling them. Either remove those alerts from the existing monitoring template and apply them to your targets, or create a new monitoring template based on one database's current settings, remove those warning/critical thresholds for your undo and temp tablespaces, and apply it to your targets.

I can't use monitoring

I'm trying to record a song and as always, I use the monitor so I can't actually hear my voice on the heaphones. Turns out it's not working.
When I pick an effect like "deeper voice" or "helium breath" it DOES work but as soon as I select "no effects" (it's what I want), it doesn't work again.
Does anyone know what I should do? Because honestly, it doesn't make any sense!!
Thank you!

I just realised it's working with my old headphones but not with my new ones! HELP!

T400s doesn't remember to use monitor when resuming from sleep

I can connect a T400s to a monitor using a DisplayPort-to-DVI cable and set it to "Projector only" (via Fn+F7). But when I put the laptop to sleep and resume, the monitor (which goes to sleep after a few seconds when not used) remains asleep and the laptop screen is used. Get an error about "monitor not found" when switching to "Projector only" at that point, but unplugging and replugging the cable causes the display to switch back to the monitor.
When I use a Series 3 Mini Dock (with the same cable) the laptop doesn't remember to use the monitor, either, but at least I can switch to "Projector only" mode without having to first diconnect the cable.
Anyone else noticed this behavior?

There should be something that is called instant resume.
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/Configuring-Instant-Resume/ta-p/389073
switch that on and it should resolve the issue (well to a certain extent).
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

[Update Rules]: How do we use monitoring ?

Dear All,
In update rules in the routine particularly, i see there internal table monitoring .. What's that ?? And how can i use it ?
Could you give me the sample please ??
Many thanks.
Niel.

Hi Niel,
The following link should explain your question. Monitor is used to pass user defined error messages to the monitor screen.
http://help.sap.com/saphelp_nw04/helpdata/en/21/894eeee0b911d4b2d90050da4c74dc/frameset.htm
Let me know if this helps.
Cheers,
Praveen.

Reformat hard drive, but can't use monitor

I have an older iMac that I want to recycle or give away. The computer itself works, but the monitor does not, it remains dark. I am able to access the hard drive via target disc mode.
Before parting with it, I want to reformat the drive or do whatever it takes to remove all of my personal info, passwords, etc . . . But since I can't actually use the monitor, is there any way I can facilitae that?
Thanks

Put it into target disk mode, hook it up to another computer, launch Disk Utility, and see if the HD is listed. If so, erase and reformat selecting zero out data.

Unwanted feedback using monitor feature

When ever I use the monitor feature for the guitar amp I get unwanted feedback and no guitar playing? Yet I can record in good quality with no feedback. why is this happening?
I use a Line 6 Pod X3 Live with an adaptor to connect guitar to ipad, clean setting on the Pod. I use the headphone jack to connect ipad to a Line 6 Spider 3 15 watt amplifier.

Actually I figured out that the ipad was recording from the mic. How do I get garageband to record from the dock connector?

Download Complete Notification doesn't use monitor on which Firefox is located itself

When Firefox itself is located on 2nd monitor, Download Complete Notification appears on 1st.
Meanwhile in FF 3.5.x that was fine and Notification was appearing on the proper monitor.

Hi,
Thanx henning.
Thanx andreas and UMA for ur prompt reply.
You both are asking the same question abt EMAIL channel configuration. And now here I am confused.
Can you plz give me a brief idea (or any available blog or URL) of how this Discussions iView and notifications work? What is transport, channel? Where workflow comes into picture(check reply from Henning)? And how will i come to know whether transport and channels are configured correctly?
>>
>>If you go to Km Config->Global Service(Advanced options)->Notificator Service.you will have to see if the channel is enabled there.. This should be your EMAIL channel.which should be configured priorly.
>>
Now answer to your question:
Notificator Service:
Name : notificator
Templates Directory : /etc/notifications
Active : CHECKED
Channels : EMAIL
Originators : notificator.EMAIL
Inbox Channel : INBOX
E-Mail Channel:
There are 2 entries: EMAIL and INTERNET
EMAIL:
password : *********
Server : exchange.sap-ag.de
User : blank field
Type : SMTP
INTERNET:
password : *******
Server : sapwdf.wdf.sap-ag.de
User : blank field
Type : SMTP
I dont know whether these are configured or default values. Our mail server is on different machine and i can ping it from my EP machine. I should use that server to send mails but I dont find that server's name or IP address anywhere in the above configuration.
So now i am totally confused ????
Help Needed.
Thanx again.
Regards,
Nilz

Can you Run Lion server on iMac and use monitor for another computer

With lion server you don't need a monitor and I figure why buy a mac mini when i could by a 27" imac and use it as a display and a mac mini running lion server.
I have been going over the scenarios and am trying to decide if I should buy the TB display or a second 27" imac. Eventually I will have 3 27" displays... but I want to run Lion Server off of one of the imacs... and use the display with the other imac.
do you know if it is possible to use the display of the imac for a mbp or another imac while running an operating system (lion Server) on the computer at the same time.
not sure if I made my self clear there or not.
Ryan

Ryan as long as both the Mac Mini and iMac have Thunderbolt you could use the iMac as an external monitor for the Mac Mini. The current machines with Thunderbolt connections are 2011 iMacs, MacMini's, MacBook Air's & all MacBook Pros.

Using 4 monitors on h8-1020

Similar Messages

Maybe you are looking for