Using 79xx Phone PC access port to connect a Netgear 5 port switch

Cisco documentation indicates that on 79xx phones you can "Use the PC access port to connect a network device, such as a computer, to the phone". What types of problems might be encountered if that device is a Netgear Fast Ethernet Unmanaged FS105 five port switch? Is there any documentation indicating whether this "supported" or "not supported"?
I know that the speed on the devices connected to the Netgear will be cut to 10/100. The devices connected to the Netgear would include - at a minimum - a computer and a Cisco wireless access point. Other devices which might be connected could include additional computers and/or a printer.
The computer(s) would also need to access a distributed video stream daily.
We are running CallManager 8.6.2.21900-5 with phone types: 7940, 7941, 7945, 7965
Thanks for any insight you might be able to provide.

Will Cisco support you doing this? Not likely.
Will it work? I suppose, in theory, it should. Just don't complain if it doesn't.
GTG

Similar Messages

I have an iPhone with an unlimited data plan. Is there a way to go online with a wifi only iPad using my phone for access?

I have an iPhone with an unlimited data plan. Is there a way to go online with a wifi only iPad using my phone for access?

If your iPhone cell carrier allows you to use Tethering, you can turn your iPhone into a wifi hotspot, then your iPad Air can connect to that for internet access. Not all cell carriers allow tethering without you signing up for additional fees/services. For example, AT&T in the US still has grandfathered "unlimited" data plans, but they do not allow tethering for those plans. With AT&T you need to switch to a Mobile Share plan (or a tiered plan if still available) to use tethering (legally).

HT5012 I am having difficulty XMIT/REC text messages to family members using Android phones? I have a 3GB data plan and all switches and buttons are set properly. Any suggestions?

I am having difficulty XMIT/REC text messages to family members using Android phones? I have a 3GB data plan and all switches and buttons are set properly. Any suggestions?

Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

TS3694 i was trying to back up my iPhone and got an error message and now i can't even access my phone. on my screen there is an itunes icon with an arrow and a picture of a cord beneath it. I can't use my phone or access anything on the phone.

I was trying to back up my phone and got an error message and cannot use my phone at all... There is a picture of an itunes icon and a cord. I cannot get to my phone or any settings or icons.... HELP. I'm not sure of my operating system or which iphone 4 it is....

Open current iTunes on your computer. Connect iPhone to the computer with USB Cable. Follow directions or click the Restore button of iTunes.

I am having an issue using my Iphone with Bluetooth in my car. If I am driving, and my wife uses her phone to access google and type in anything, it activates the phone feature, and "Talking" appears on our Navi screen. Can anyone help?

We are having trouble using our Iphone with the Bluetooth system in our 2012 Highlander. When I am driving and my wife, using her Iphone, uses Google and types in anything at all, letters of numbers, it activates the phone on our Navigation system and initiates a call. It goes away after a few seconds, but happens every time.
No problem pairing the phone with the car's bluetooth, and no problems making calls.
Just returned from our Toyota dealer, who had no answers.
Can anyone help on this?
Thanks in advance!

Thank you for the response.
This happens when I am driving, and my wife, using her Iphone, accesses Google.com. Once she is on the web site, and she types in her search, it activates the phone on the Navi system, and the screen on the navi system says "talking".
I have a Blackberry, and it is also paired with the car, but we make sure only my wife's Iphone is connected when the happens.
THANK YOU!

HT4623 I have an iPhone 4S that i dont use anymore. It is locked with a password & i can't remember the password. i am wanting to let my child use this phone now but when i connect it to my computer it says that it cannot find the device driver. How can i

I have an iPhone 4S that is locked with a password & cant remember password. when I connect to my computer it says that it cannot find the device driver. How can i fix this?

Hello jlb1977,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
Best of luck,
Mario

Cisco 2960x - auto qos voip cisco-phone on access ports

After configuring "auto qos voip cisco-phone" on a stack of 2960x switches, we later noticed that after a power cycle (config was saved first) it went missing when doing a "show run" from the interface configs, on one of the switches (g1/0/1-48 had it applied, then after power cycle it didn't show). However, doing a "show auto qos interface" shows it is still applied to all interfaces g10/1-48.
I try to do "auto qos voip cisco-phone" again on g1/0/1-48, and it shows this:
SwitchStack01(config-if-range)#auto qos voip cisco-phone
AutoQoS Error: AutoQoS already configured
% Range command terminated because it failed on GigabitEthernet1/0/1
If I attempt to remove "auto qos voip cisco-phone", it shows this:
SwitchStack01(config-if-range)#no auto qos voip cisco-phone
AutoQoS Error: AutoQoS not configured
% Range command terminated because it failed on GigabitEthernet1/0/1
When I do a "show run", it is no longer displayed for the first switch of the stack.So is it still applied to the interfaces or not? Is this a bug? Has anyone else experienced this? This has happened to at least a couple stacks of 2960x's we have.
Thanks!

It appears to be a bug in the code. Open a TAC ticket with Cisco and send them the output and the IOS version you are using so they can help you resolve the issue. Most likely, they recommend an upgrade.
HTH

I have an iPhone 4, which is on 3(UK) network, I want to use this phone with a SFR sim card is possible just to switch sim cards. 3 UK to SFR

I have ordered an iPhone 5 (YIPEE) to use on 3 (UK), I would like to use my old iPhone 4 on SFR (France), currently using it on 3 (UK). Would I be able too just swap my sim card I have at the moment, on 3 (UK) for a SFR (France) sim card or is there something I need to do to make that happen? What would that be?
I would really appreciate any advice.

You need to unlock your iPhone with 3 to use it with other microSIMs. Check their website to see what the process is.

Replacing high density port switch/blade strategy

Hello,
I'm looking for strategies in replacing 48 port blades/switches while minimizing downtime. Our management wants to know how long it would take to replace a switch and re-cable it. So I'm trying to find some best practices on replacing switches/blades and how to maintain cable to port integrity when moving between switches/blades. The only thing I've really found comes from data center infrastructure, where they stress the importance of labelling cables.
I was wondering if anyone else had other strategies they use when replacing high density port switches/blades
Thanks in advance

patrickpaez wrote: Leo,Thanks for the response. What about places where your rack or chasis is full and you have to remove the exsisting chasis or blade inorder to add the replacement equipement?
Label, Label, Label.
I can't stress it enough, especially if you're trying to do a "mirror" replacement and have everything working exactly the same as it was before. Don't rely on memory, don't rely on out-of-date documentation - label every cable
If you're talking physical switches, then configure them FIRST to match your existing configuration (VLAN's, SVI's, Trunks etc etc), then label *every* cable plugged into your existing switch, pull the old one out, mount the new one, then put your cables back into place based on the labels.
If you're talking blades, the process is about the same except you *shouldn't* have to worry about configuring first - if you're doing a slot-for-slot replacement, the port designations should remain the same, and your existing config should just take effect on reboot.
If it's an additional module in an empty slot, just plug the module in, duplicate the configuration from the existing module, and move your cables one-by-one to matching ports on the new blade.
Cheers
Trap for new players in blade/modular environments - make DAMN sure the IOS version you're running actually supports the module you're installing - or you're going to end up in a mess!

How to access ports in windows using JDK 1.5 or later

Hi,
My task is to read an input from the parallel port and use a modem to dial a phone number connected to a seril port .
At the same time i am generating an SMS depending on the input i read from parallel port.To run this SMS program i need a new version of java.
I've been searching for days to find a way to access serial port in a new version.I managed only 1.1.8.
Please..
If someone has any idea may i know how to copy the necessary files (dll and packages) to JDK 1.5 or later please let me know.
I'm using windows platform:(
Thanks
goodnews
If anyone needs info about Accessing ports in windows using jdk1.1.8 just post below..I'll give what i have.

user12858801 wrote:
Hello,
Has there been any development with this post?after 3 years, what do you think?

I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer.

Hi everyone! I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer, so I can't put it in recovery mode or someting like that... What can I do?? I tried everything they tell me to do in the apple support but nothing seems to work. Thank you!

No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

Using 2nd Built-In Ethernet port for internet access?

Hello,
I have a Quad-G5 running 10.4.8. In its current configuration, all its network communications, including web access, go over the active ethernet port (Built-in 1).
Does anyone know how I could use the second built-in port for internet access only? I'd like to route local traffic over the first port, but go "out" over the second.
The machine is on a corporate network, and proxy access is slowwww. I have the ability to use a direct connect to the internet, but still need to be connected locally. Any thoughts? Many thanks . . . JD

Easy. Go to System Preferences > Network > Network Port Configurations and drag the port connected to the internet to the top, so that it has priority over the port connected to your LAN. This prevents DNS time-out when loading a website, but still allows LAN traffic over the other port because that traffic is most likely going to use ARP rather than DNS. For good measure, you can add your company's domain (such as "my_company.lan") to System Preferences > Network > Internal_Ethernet > TCP/IP > Search Domains.

What is the recommenden access port QoS configuration for 8900/9900 video enabled phones

Hi all,
we are currently starting to roll out some video enabled 9900 and 8900 phones in our network. In the past we did not use video and configured the access ports on our Catalyst 2960 switches with "auto qos voip ciscp-phone". This however creates a policy which does not include a class-map to correctly handle the AF41 video traffic coming from those phones. I have thougth about extending the autoqos policy with a AF41 class-map but am not sure if this is the right way to do it.
That's what I have in mind:
class-map match-all AUTOQOS_VIDEO_DATA_CLASS
match ip dscp af41
class-map match-all AUTOQOS_VOIP_DATA_CLASS
match ip dscp ef
class-map match-all AUTOQOS_DEFAULT_CLASS
match access-group name AUTOQOS-ACL-DEFAULT
class-map match-all AUTOQOS_VOIP_SIGNAL_CLASS
match ip dscp cs3
policy-map AUTOQOS-SRND4-CISCOPHONE-POLICY
class AUTOQOS_VOIP_DATA_CLASS
   set dscp ef
police 128000 8000 exceed-action policed-dscp-transmit
class AUTOQOS_VIDEO_DATA_CLASS
   set dscp af41
police 1500000 8000 exceed-action policed-dscp-transmit
class AUTOQOS_VOIP_SIGNAL_CLASS
   set dscp cs3
police 32000 8000 exceed-action policed-dscp-transmit
class AUTOQOS_DEFAULT_CLASS
   set dscp default
police 10000000 8000 exceed-action policed-dscp-transmit
How do you guys do it ? Is there some documentation for this ?
Thank you for your kind help
best regards
Andreas

Hi
You have to keep this table on your mind. Your configuration is fine if your configuration for SD video , but if for HD video , it is not ok you have to change video bandwidth at least 5M.
Traffic Type
Layer 2 CoS
Layer 3 IP Precedence
Layer 3 DSCP
Voice RTP1
5
5
EF
Voice control
3
3
AF31
Video conference
4
4
AF41
Streaming video (IP/TV)
1
1
AF13
Data
0-2
0-2
0-AF23
*Interactive Video "AF41"- Sensitive but can tolerate packet loss of about 1% and latency almost same as voice.
*Streaming Video "AF13" - Less sensitive - can tolerate about 4-5% packet loss and latency of about 4-5 seconds.
*HD video conference will require between 5M to 16M , but SD video conference will use 384K to 1 M
Note:-Video QOS , if you will assume that your video conference will use around 384K , you have to add 20% because video conference include voice so the total bandwidth 460K.
Kindly check the below link
http://www.sdcug.com/wp-content/uploads/2011/04/Campus-QoS-for-Voice-and-Video.pdf
Thanks
please rate all useful information

Cisco 3750X -- 10G uplink - Can be used as access port?

Dear All,
I have small question, I am planning for Cisco 3750X with 10G SFP+ service module. I want to know that whether it can be used as Access Ports connecting to server as this is mostly used as uplink port.
Thank You,
Abhisar.

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Well if you want to connect anything with 10g to a 3750X, you're limited to using a module with 10g ports.
Other than 10g capability on some module cards, something to note, the module ports, I believe, are supported by larger buffers (including the gig module ports).
As the others have noted, you can use any port for any purpose. However, if you connect a server to a 10g port, be aware you might start to see drops on your other host (gig) ports as the server will now be able send faster than the host port can receive data. To minimize this, you might either disable QoS on the switch (providing maximum buffers to all egress traffic) or you might need to tweak buffer resource settings (the default settings often drop some packets, when there are bursts, of default marked packets).

HT5624 when ever i log any application on my 4s phone i get notification ie connect to iTunes to use push notification

when ever i log any application on my 4s phone i get notification ie connect to iTunes to use push notification

Hello there, ajinkyab.
The following Knowledge Base article provides some great. practical steps for troubleshooting the issue you're describing:
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/TS3305
To use certain services, iTunes must download and install an authentication token on the device. Because iPad and iPod touch do not require an active Internet connection to activate, these tokens may not be downloaded and installed during initial setup.
You can resolve this issue by verifying that iTunes has an active Internet connection. Use the following steps:
Open iTunes on your Mac or PC.
Verify that your Mac or PC has an active Internet connection by accessing the iTunes Store in iTunes.
Connect your iPad or iPod touch to your Mac or PC.
After the sync completes, verify you can access YouTube.
This article also provides a great resource for troubleshooting apps installed on your iOS device:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/TS1702
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Using 79xx Phone PC access port to connect a Netgear 5 port switch

Similar Messages

Maybe you are looking for