Using 802.1x and vpn on t-mobile hotspot

hi all,
how do i configure 802.1x and vpn to enhance security on t-mobile hotspot?
thanx for your help.

Multi-Host is not the right option for you. In this Multi-Host only one device has to successfully authenticate to authenticate all device on that port.
You need to set host-mode to "multi-auth"

Similar Messages

Using 802.1x and 2 hosts (one physical and one virtual) on the same port

Hello,
We trying to utilize the following scenario:
BYOD with users' windows based laptops and Apple Mac Books
Virtual machines within each of the physical machines: For Windows, the VMs will be Windows 7 VMs running within VM Workstation. For Macs, users will be running Windows 7 VMs within Fusion.
802.1x set for multi-host
Using 802.1x, we have a guest network that places the user's physical machine in once it fails authentication. The virtual machine runs the corporate image, and we'd like to have this VM connected to our corporate VLAN.
We have been running into this scenario though:
1.     User plugs his BYOD laptop from into the network. His laptop gets attached to the guest network because it fails the 802.1x check.
2.      The VM is powered on. It successfully is connected to the corporate network.
3.      Now, the user unplugs his network cable from his host machine and waits 10 seconds.
4.      He then re-plugs the network cable to his host machine.
5.      The VM is the first to authenticate to the 802.1x network and it gains access to the corporate network.
       6.      Due to the VM being the first to authenticate on 802.1x, the host network connection piggybacks off of the VM, and therefore the host gains access to the corporate network
Obviously this represents a no-go if the user's BYOD computer is able to access the corporate network. Is there is any specific way that 802.1x can be configured to prevent this from happening?
Thanks,
Mooge

Multi-Host is not the right option for you. In this Multi-Host only one device has to successfully authenticate to authenticate all device on that port.
You need to set host-mode to "multi-auth"

Do I need to use open directory on Yosemite Server, I'm only looking to use file sharing and VPN

I'm setting up a new mac mini server with Yosemite and I was wondering if there are any advantages or disadvantages to not using the open directory service? The only services I'm planning on using are File Sharing and VPN.

You don't need Open Directory unless you want to manage user accounts centrally on the server.

Can I use FaceTime if my iphone is a mobile hotspot?

I am considering making my iPhone a mobile hotspot. Will this make FaceTime possible?

Identifying iPhone models - Support - Apple

Mapping Drives using a PIX501 and vpn client

We have a 501 and are using cisco vpn client. We have a Windows 2000 and a windows 2003 server on the network we are connecting to. We use windows authentication when we logon the vpn. We are mapping drives on both servers onto the client. The mapped drives on the 2000 server are visable to the client. The mapped drives on the 2003 server are not even when we try to remap. We have Routing and Remote Access enabled on the 2003 server but still fail to map the drives (or ping the 2003 server). Can anyone out there shed any light on our problem. Thanks

Start with this link which gives a number of examples on how to configure a VPN client with the VPN 3000 -
http://www.cisco.com/en/US/tech/tk583/tk372/tech_configuration_examples_list.html#anchor22
Jon

Using 802.1X and non-Cisco IP Phones

Hi there,
Having some questions about an 802.1x/non-Cisco ip phone setup and was hoping to find some answers/user-experience with this setup.
Main questions i'm facing:
1) When using non-Cisco ip phones (eg Nortel or Siemens) and a previous authorized client connected behind this ip phone gets disconnected. What will this action do with the authorized state of 802.1X on the switch port? WIll it stay authorized until the reauth timer expires or does it reject communication from any other device?
2) What about EAPOL-Logoff messages from the ip phone to the switch. Are these only used by Cisco phones when they experience a link-status change on data ports?
Thanks for sharing your thoughts

Overall, you need to try and deal with the fact that a machine can disappear from the network and the network may not know about it directly (i.e. Link doesn't go down).
I have no idea what other phones do, but Cisco phones send an EAPOL-Logoff when something is unplugged. This lets the switch know directly, and 1X session start is torn down immediately, closing what would be a security hole.
Fundamentally, re-auth is a workaround only, and this is not the reason to enable re-auth to begin with.
If your phone doesn't send an EAPOL-Logoff in this case, the switch might be left thinking an attack is underway when someone else tries to plug in (with presumably a different MAC). You do NOT want this to occur.
Hope this helps,

Using OS X and VPN ?

Has anyone successfully used a hardware VPN router i.e. Netgear FVS318, etc and the VPN client in OS X ? If so, how did you setup the client in OS X ?
Dennis

I'm equally interested in trying to set up VPN on a Netgear FVS314 or FVS114 (4-LAN port version). I downloaded the manuals for each and the VPN setup seems the same (each can be set up for 8 VPN tunnels).
The "port-forwarding" information in the first posted reply is not helpful. The whole purpose of VPN is to avoid port forwarding and allow a secure connection that acts as if it were on the local network.
The Netgear manuals don't seem to refer to the setting that are available in Internet Config or System Preferences - Network?

Can't Use Wi-Fi and VPN At Same Time

Newby to the iPhone, so forgive me if this is a basic setup issue that I have overlooked...
I have a user that when she is at home wants to connect to her Wi-Fi network AND connect to our VPN to sync with email. She cannot do both. When connected to Wi-Fi the VPN does not connect. Turning Wi-Fi off, she can connect. Is this normal?
Thanks in advance.

Richard,
Yes that is a normal operation of the iPhone. It can only utilize one connection type at a time weather it is Edge, WiFi, or VPN

IPhone 5S won't use 802.11n

Recently I was messing around with my WiFi router's settings to test moving to a 5Ghz spectrum from the 2.4Ghz one. Sometime during the process I noticed that my iPhone had disconnected from the router and would not connect to it no matter what I tried. As a last resort I turned off the setting that required all devices that were connected to be using 802.11n. As soon as the setting was changed my iPhone connected to the wireless network. When I looked in the connected devices tap it said that it was using 802.11g. To my knowledge the phone was using 802.11n on iOS7 but something changed after the update to iOS8.1. Is this a software problem (and are other people experiencing the same problem), or could it be a hardware problem with the phone?

I have EXACTLY the same issue & and just spent nearly an hour on the phone with BT trying to get an answer, to no avail!
My setup is:
BT HH 2.0 set up for 8011.2 b/g/n (as recommended)
BT HH has BTFon on and sharing - as well as BT Openzone
Several mobile devices - but let's focus specifically on the Dell Latitude E6510 with an N-Series wireless card
The scenario is:
My BT HH is showing an 'actual data transfer speed' of 130Mbps
My laptop connects to the BT HH SSID at a constant 54Mbps
My laptop connects to the BT BTFon SSID at a constant 130Mbps
My laptop connects to the BTOpenzone SSID at a constant 130Mbps
My laptop connects fine to other N-Series routers at 130Mbps outside of my home - so I am ruling out any configuration issues with the laptop.
There are no other wireless devices connected to the router at present.
I've used inSSIDer 2.0 to validate that the router is broadcasting at 130Mbps using 802.11n and the signal is constantly strong
So, why is my laptop unable to achieve a speed of 130Mps from the router?
Why can I achieve better throughputs if I connect to BTFon or BTOpenzone?
My question to the BT Support staff (for which they had no answer) is if I am enabling BTFon and BTOpenzone on my router, is that in some way reducing MY internal throughput in speed?
The BT HH 2.0 is promoted as an N-Series device - yet I cannot use it as such - and I make use of the BTFon community as I travel about, so I do not want to switch it off.
I know that I can connect via Ethernet to the HH, and do when I am static - however, I also stream some large files/videos around the house, for which N-Series is perfect - when it works!!!
Any advice / help gratefully received.

Macintosh OSX, 802.1x and PEAP

I'm preparing to implement 802.1x port authentication for both wired and wireless connections. The authentication server is Windows 2003 IAS. In the test environment, Windows XP clients can connect fine, but I'm not sure how to configure this for Mac OSX workstations (10.4.6). Has anyone successfully done this? If so could you please explain the proceedure, or direct me to documentation that explains the process?

Assuming you're using NAC fraework then it's bad news, 802.1x won't work on a Mac. If you use 802.1x and L2IP in combination then wired Macs will work but wireless Macs will not. The reason is that the Cisco CTA for the Mac communicates with using EAP over UDP and this transport is not available when using 802.1x alone or over a wireless link with 802.1x or L2IP. The only way of catering for all client types at once (Windows wired and wireless, Mac wired and wireless) is L3IP.
The NAC Appliance "will" support wireless Macs in a future release but (I believe) doesn't at the moment.

802.1X and Wake on LAN

Hi,
I have applied 802.1x on Cat4500 and cat 3750 and i need to use Wake on LAn to load software on my Pc's.
I what i have to config?
Thanks

Hi!
Is Cisco working to implement this feature also in smaller IOS switches like 2950 etc.in the future?
We want to use 802.1X and WOL together in this devices.So far it seems to be not possible.
nice feature, i will hope the best.
thanks
michael

Problems when using my 3G mobile hotspot app

Now this used to work fine, now not working. On my Casio Commando, there is an app that is titled, 3G mobile hotspot. Now I have used this to connect to the internet using my netbook, work one, when in an area that the Verizon Fob Card does not find a good signal. About 2 weeks ago while running this app, it keep telling me that there is no internet connection. Now my netbook tells me that it is connected to my phone, but no internet connection. Have just tried this same procedure on my home computer, and same thing. So why am I not able to connect to the internet, but I can tether? Any help would be greatly appreciated. P.S. When I try to check the app by using the manage updates, that app is not in the list. This makes this even more weird.

stolencode101,
We want you to be able to enjoy your mobile hotspot on your device. Please try a couple of troubleshooting steps with me. First, please turn on your mobile data, Settings>Wireless & Networks> Mobile Networks> Uncheck Data enabled. Next, turn on airplane mode, Settings>Wireless & Networks>Check Airplane Mode. Then, power cycle your phone. Finally, Make sure Airplane mode is off, Turn mobile data back on, make sure Wi-Fi is off, and turn on 3G mobile hotspot. Let us know if this works.
LindseyT_VZW
Follow us on Twitter @VZWSupport

How to create a mobile hotspot with AccessConnections?

I wanted to share my Mobile Broadband/WAN connection via a 802.11 ad-hoc network the other day and so I also enabled the WLAN on my X201 tablet and then started the "mobile Hotspot" feature in Access Connections (right-most tab).
But instead of sharing my WAN internet connection via WiFi this started a crazy dance, where my Mobile Broadband connection was disconnected about once per minute (which also terminates the "mobile hotspot" feature). Then the WAN connection is re-established again which takes about 30 seconds and shortly after the mobile hotspot is started again, after which the WAN is promptly disconnected again etc.
Disabling WiFi/802.11 brought the WAN connection back to stability, but re-enabling it, started that crazy on-/off-shuttling again.
So, in short, it seems impossible to do this kind of connection sharing using Access Connections or what am I missing? Why is that so? Any advice how one can do such connection sharing (of an Ethernet or wireless broadband connection) via a wireless 802.11 ad-hoc network?
This is on an X201 Tablet running under Windows 8 Pro (x64).
Michael

May I suggest that you just wait some more time so the uys at lenovo have the time to get everything sorted out with win8. Especially if you have an older model...
Using x230t (i5-3320M, 8GB RAM, 256GB SSD, 80GB mSata-SSD) and loving it!
"I may not own the world but I own my mind and therefore the world is at my feets." (me)

VZAM/USB551L vs. LG Enlighten as Mobile Hotspot

This has been bugging me for awhile now so I'm going to throw this out and see if anyone has or can found the answer. I connect my Windows 8 HP Laptop to the internet using VZ Access Manager and the USB551L OR I can use my LG Enlighten cell phone as a mobile hotspot. Using my cell phone, I have NO ISSUES whatsoever. Full bars of service. Never lose connectivity. Never drops service. Web pages load quickly and correctly. But, if I'm using the VZAM & USB551L I consistently lose connectivity, get "no service" messages, am lucky to get even 1 bar of service, repeatedly see DNS and DHCP errors in my event viewer and also IPv4 errors (IPv4 connection failed after 3 attempt) and since updating to Version 7.9, Facebook pages will not load at all.
Why is using my phone as a mobile hotspot "troublefree" vs. the VZAM/USB551L combo that was purchased SPECIFICALLY for the internet and is one problem after another? I appreciate any advice on this someone has. Thank you.

Its hard to say exactly what is different between a smartphone hotspot service and a USB modem. A better comparison would be between a USB modem and a MiFi or mobile hotspot device.
My best guess is that the hardware used for your smartphone is better than that used on the USB modem, thus your performance is better.
Another good explanation would be that your USB551L is damaged and unable to maintain a consistent connection. It is very common for USB modems to suffer from accidental damage while plugging and unplugging from computers. The USB connection itself tends to wiggle lose and in many cases breaks or bends to the point where it is unusable. Cant tell you how many of those we had to replace for that same issue when we relied on USB modems instead of MiFi's.
If your USB551L is still covered under the warranty then I would start by calling the VZW hotline and asking to speak with Technical support. The best time to call them would be when you are at your normal enviornment and when the problem is happening. That way VZW can go through the normal troubleshooting steps and see if a replacement is necessary or not.
There really isnt much troubleshooting or configuration settings that can be changed on a USB modem. Either they work or they dont in most cases and the only course of action is swapping it out.

Droid Charge Mobile Hotspot

Does Verizon charge extra for the Droid Charge Mobile Hotspot feature or is it included in the data package? Any extra hardware or cables needed? Does the mobile hotspot work in 3G areas also? TIA

Thank you for your inquiry. Adding to what was stated, to get unlimited 4G LTE Mobile Hotspot and Mobile Broadband Connect usage until June 15, 2011, it comes with the purchase of a ThunderBolt by HTC or a DROID Charge by Samsung with a voice plan and a data package $29.99 or higher. The hotspot itself is a data feature not included in the data plan. This is because the data plan covers data usage on the pone itself. The hotspot is a connection point for another device to use its own separate data access the mobile hotspot is designed for 4G coverage just as one of the two devices offered use 4G. In areas where 4G is not available, the devices would default and work on a 3G network. No extra cables or hardware is needed.

Using 802.1x and vpn on t-mobile hotspot

Similar Messages

Maybe you are looking for