Using a Buffalo Linkstation NAS drive on the Airport Extreme 802.11n

I used the Buffalo Linkstation NAS drive on the previous Airport Extreme. I just upgraded to the new Airport Extreme and cannot get it to work. Buffalo support, after a two hour wait and and a 40 minute conversation, decided that it wouldn't work. If it worked on the older Airport Express, I think it should work on this one.
Does anyone have any idea how I can get this NAS drive hooked up to the Router?
Thanks,
Tim
IMAC Duo Mac OS X (10.4.9) 2gig/250gig/Office 2004/stuffit/HP Wireless printer

According to their website, the NewerTech miniStack should work too.
It has the advantage of having a built in USB hub to attach other devices(i.e.a printer.)
http://www.newertech.com/products/ministackv2_5.php

Similar Messages

I bought the Airport Extreme 802.11n Wifi

I bought the Airport Extreme 802.11n Wifi from the Apple store in West Edmonton Mall Canada got to the airport, customs scanned the box (which was unopened) and they got a dangerous chemicals hit on the unit. No need to say what else happened there after, i was skinned inside out, body search, drill with the 21 questions and on top that they want to know if i have any ties with any terrorist organizations.
Why would this device give off such a reading?

It doesn't.
The box may have been handled by someone with unclean hands. Or, their security equipment may have been miscalibrated. Or, they're just incompetent. Don't you feel safe?

Speed issue with the AirPort Extreme (802.11n)

Hi, I was wondering if anyone could help out with this.
I am the Design Manager and IT Director at a publishing company where we have just upgraded to an AirPort Extreme (802.11n) base station to drive our network. We went this route as all of our machines are Mac Minis with built-in Airport and we were in a situation where re-doing a hardwire on the building was not going to be a possibility due to budget costs.
Our new configuration seems to be running very well and has the following devices connected to the AirPort Extreme:
Linksys Firewall Router (which was used on our old system and was requested by corporate to stay in the lineup to keep the static IP addresses we've already defined for our printers, VPN, etc. intact). The configuration on this part is modem to Linksys router to uplink port on the Airport).
New Panther, Intel based Xserve connected to the Airport's Ethernet port 1.
A 4 port ethernet switch connected to the Airport's Ethernet port 2 which drives four of our HP LaserJet printers.
Ethernet port 3 is not occupied.
All of the ethernet cords connecting our equipment are brand new.
For the most part, everything's been running blazing fast with a remarkable speed increase over our old hardwired setup. However, I've received a few complaints about slow speeds when dragging and dropping and working with files that are stored on our Xserve - we get alot of the "spinning wheel" and the transmission speeds seem very slow.
At present, we have several category 6 ethernet cords on backorder. I was planning on using one to take advantage of the gigabit ethernet capabilities between the Airport and the Xserve (as these are the only two elements of the network that support gigabit ethernet, besides the majority of our Mac Minis. Printers and cable modem are only 10-100 capable, so those will stand as is).
Can anyone tell me if the gigabit ethernet cord will be the solution to this one slow aspect of the new network? Any other settings I could apply to possibly speed up the transmission time when moving files to and from our server? Good news is that every workstation in the house is getting a full 4 bars.
Many thanks!

PS, just wanted to point out that we are also running in bridge mode.
Thanks!

XP sp3 cannot see usb hard drive connected to airport extreme 802.11n

I have a sata drive that the airport utility recognizes. I attempted to follow the instructions from post HT1331 but no luck yet. I also reformatted the drive from ntfs to fat32 using vista but with the same result.
I found another post while writing this one which solved my problem. It turns out how I formatted the drive wasn't usable by AEBS.
Connecting Large USB Hard Drives to Airport Extreme
I needed to format the drive using the instructions found below.
http://www.ridgecrop.demon.co.uk/index.htm?fat32format.htm
After doing this and plugging in the drive I was able to use the drive intended. Since I had started the post I figured I would list the solution.
Cheers!

I don't think two problem are related. Now, for PC, try to disable the firewall software if you ave one. Some firewall can block it, like for ex PC Tools firewall, or ZonaAlarm. Some of them you can configure to work with disk agent.

Wanted: 1 TB drive that works with the Airport Extreme (802.11n)

My apologies if this is on here somewhere, but I've searched this forum and googled around quite a bit.
I'd like to connect an external 1 TB hard drive to my new Airport Extreme's USB port.
I have found plenty of info on drives that don't seem to work.
I can add that the drive I purchased (1TB Cavalry CAUM series) does not work.
Can anyone chime in with a 1 TB drive that has been working for at least a few weeks?
Thanks!

According to their website, the NewerTech miniStack should work too.
It has the advantage of having a built in USB hub to attach other devices(i.e.a printer.)
http://www.newertech.com/products/ministackv2_5.php

Why after running the Airport Extreme 802.11n cd, still show 802.11 a/b/g??

Hi,
I had install the 802.11n from the CD of Airport Extreme package, but still under the "Network Utitlity", I can't see the "n"?
Anyone can help to advise?

I have a Core duo 2 MBP...
Not clear from the description of your processor.
If you have a "Core Duo" processor, it is not capable of 'n'.
If you have a "Core 2 Duo" processor, it is capable of 'n'.
I've updated to AirPortExtremeUpdate2007003 - how do i know if i'm using n capability?
To check to see if your Mac has 'n' capability (after neabler installed):
Open Network Utility (found in the Applications > Utilities folder)
Under the Info Tab, choose Network Interface (en1)
In the section "Model: Wireless Network Adapter," if it says (802.11a/b/g/n), you already have the 802.11n enabler installed. If it says (802.11a/b/g), you do not have the 802.11n enabler installed.

SERIOUSLY slow USB hard drive on the new Airport Extreme 802.11n

I have recently bought the new airport etreme 802.11n. Great little device, look wonderful on the office desk. I had some troubles getting it up and running on my machine but finaly got there in the end.
The USB hard drive is a great little addition that I was very excited about, untill I got it running. It is amazingly slow, for example I tried to copy a folder that contained 15 files which amounted to 135.6mb and it took 20 mins and 24 seconds to upload!
Is this just the speed that it should be uploading or is there somehting wrong with my settings.
I'm running on 3 bars of signal and the settings I'm using are:
connect with password (which is the same as the base stations password)
Automatically discover disks
Show in menu bar
If anyone knows the technical data for the transfer speeds and can confirm my queries I'd really appreciate it!
Thanks in advance

I have recently bought the new airport etreme
802.11n. Great little device, look wonderful on the
office desk. I had some troubles getting it up and
running on my machine but finaly got there in the
end.
The USB hard drive is a great little addition that I
was very excited about, untill I got it running. It
is amazingly slow, for example I tried to copy a
folder that contained 15 files which amounted to
135.6mb and it took 20 mins and 24 seconds to
upload!
Is this just the speed that it should be uploading or
is there somehting wrong with my settings.
I'm running on 3 bars of signal and the settings I'm
using are:
connect with password (which is the same as the base
stations password)
Automatically discover disks
Show in menu bar
If anyone knows the technical data for the transfer
speeds and can confirm my queries I'd really
appreciate it!
Thanks in advance
Does your drive meet these requirements?:
You can connect USB-based storage devices to an AirPort Extreme (802.11n). Learn which formats and protocols are supported.
The AirPort Extreme (802.11n) supports USB storage devices that have a block size of 512 bytes, and are formatted as Mac OS Extended (HFS-plus), FAT16, or FAT32. Not all USB storage devices use a block size of 512 bytes.
The AirPort Extreme (802.11n) shares storage devices based on the format used to initialize the storage device. For example, if HFS-plus formatting was used, AFP and SMB/CIFS protocols are used to share the device on the network. If FAT16 or FAT32 was used, SMB/CIFS protocols are used.
The AirPort Extreme (802.11n) works with disks that have a single partition and are not RAID volumes (no more than one volume per physical disk).
Note: Use AirPort Disk Utility to discover and mount AirPort Extreme-based volumes over the network.
William

AirPort Extreme 802.11n* Enabler for Mac 4 use with Touch?

Hello,
I have a 2nd Gen Touch with the latest updated software. I use Airport to connect to the internet on my new iMac 24". Will the AirPort Extreme 802.11n* Enabler software now offered in the Apple store($1.99) for Mac improve communications between the Touch and my iMac?
Thanks

Nope. Your touch is still limited to b/g mode wireless. In fact, if you have an all n network, your touch won't even know that it exists.
Most of your Mac to iPod communication is via the USB cable unless you are using Remote or other applications that can move files on and off.
BTW, that software is to enable early intel Macs to use N wireless. If your Mac is relatively new, you won't need it.
Message was edited by: luvlabs

Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

Yes, if the drive is formatted in Mac OS Extended (Journaled).
The USB port on the Time Capsule is under powered, so you may need use a powered USB hub with the 4 TB drive...even if it has its own power supply.

Can I share my external hard drive over the Airport Extreme via the internet to someone in a different city?

Can I share my external hard drive over the Airport Extreme via the internet to someone in a different city?

Yes. Please see the following AirPort User Tip for details on several methods to do so.

After connecting the Hard Drive to the airport extreme, where can I find the file location in Windows 7

After connecting the Hard Drive to the airport extreme, where can I find the File Location (to access my files from my Hard drive)

Hi,
Try this select to check backup history:
Select
r1.database_name,
r1.name,
(case r1.[type] when 'D' then 'Full database backup' when 'I' then 'Differential database' when 'L' then 'Transaction Log Backup' else r1.[type] end) as BackupType,
r3.physical_device_name,
r1.backup_start_date,
r1.backup_finish_date,
r1.backup_size,
r1.compressed_backup_size,
r2.is_compressed,
r1.server_name,
r1.first_lsn,
r1.last_lsn
from msdb.dbo.backupset r1
inner join [msdb].[dbo].[backupmediaset] r2
on r1.media_set_id = r2.media_set_id
inner join [msdb].[dbo].[backupmediafamily] r3
on r1.media_set_id = r3.media_set_id

Is the airport express 802.11n used as a booster to enhance your wifi capabilities?

is the airport express 802.11n used as a booster to enhance your wifi capabilities? I was told when purchased that I do not have to connect it physically to the router but it would enhance the wifi capabilities if I placed in a room near the router/dsl? Do I understand this correctly. It never stops flashing yellow?

Any Apple AirPort Base Station (AirPort Extreme, Express, or Time Capsule) can be used to "wirelessly extend" any other Apple AirPort Base Station's wireless network.
They may also be used to "extend" any network created by any other wireless router, if you connect it to that router with an Ethernet cable. The benefit conveyed by connecting it in that manner is commensurate with the distance between the two devices, limited by Ethernet LAN specifications (100m).

Airport Extreme 802.11n sharing a disk with a -1 on the mount point

First I have to reboot the device once a day because of the disk that disconnect for no reason like many other on the list ever since I upgraded to 7.2.1 but not sure that as to do with this problem.
Here's is the deal, I have an Airport Extreme 802.11n with a 500GB shared on the USB port. I want to use my iPhoto Library on the 500GB. It's about 11GB, I have tranfered the library over and iPhoto is asking to choose the library I want to use. When I try to point it to the 500GB everything is greyed out. When I use a terminal and do a df command to show the mount point on my computer, I get
/Volumes/500GB-1
Why and where the -1 is coming from?
How can I get /Volumes/500GB only?
One thing I have noticed about the -1 is when I loose the disk connection it prompt me to disconnect 500GB-1 but sometime even with a -2 and -3.
Thx!

can I hook up my printer, scanner and external harddrive through a usb hub?
Partially, a large number of USB printers will work with the AirPort Base Stations' USB port, but not all. I suggest that you checkout the following iFelix site to see if your printer is compatible. Similiarly, most external USB hard drives should work as well.
However, devices that rely on two-way communications, like copiers and scanners, won't work when connected to the USB port.

I recently installed an Airport Extreme 802.11N that I bought in May 2013. It replaced an Airport Extreme 802.11N that I bought in July 2007. My USB printer (Lexmark E350d) worked fine with the old Airport, but the printer won't work with the new one.

I recently installed an Airport Extreme 802.11N that I bought in May 2013. It replaced an Airport Extreme 802.11N that I bought in July 2007. My USB printer (Lexmark E350d) worked fine with the old Airport, but I'm having trouble with the new one. When I try to print, I get a USB Waiting message on the printer, and when I force a page to print by pressing Go on the printer, I get a page that says ERROR: syntaxerror OFFENDING COMMAND: true. . . .cvt . . . fpgm . . . x . . .lglyf . . . <..J head . . . STACK: / [ -mark- /sfnts I’ve tried shutting down the printer and disconnecting it and the Airport, but that doesn’t help. I reset the settings on the printer. I upgraded the Airport firmware and removed, reinstalled, and upgraded the Lexmark printer driver. After I upgraded the firmware and printer driver, a few pages printed correctly, but then I got the same syntax error page as before. Any suggestions for getting the printer to work correctly?

Use a powered USB hub between the AE and the printer.. the usb port does sometimes have issues.
Try deleting the printer in the Mac and reinstall it.. the change in AE can represent effectively a change of printer.. it is important to make sure that is all up to date.
Beyond that.. USB printers.. ughhh! Consider for two toners you can go and buy a proper network printer.

User Contributed Tips in the AirPort AirPort Extreme (802.11n) forum

*The following User Contributed Tips are located in the AirPort > AirPort Extreme (802.11n) forum:*
adsfushi72 - What does this acronym mean?
http://discussions.apple.com/thread.jspa?threadID=2450065
Publish date: June 4, 2010
William Kucharski - Having issues with your AirPort connection? Please be specific.
http://discussions.apple.com/thread.jspa?threadID=2227197
Publish date: Nov 21, 2009
William Kucharski - Apple AirPort drivers only support a WEP key index of 1
http://discussions.apple.com/thread.jspa?threadID=1654663
Publish date: Oct 16, 2008
*The following related tips are located in other areas of Apple Discussions:*
a brody - Airport, 10.5.8, and MacBook and MacBook Pros and slow internet
http://discussions.apple.com/thread.jspa?threadID=2291464
Publish date: January 7, 2010
Rich Love - Airport and Roadrunner (Jan 6, 2002)
http://discussions.apple.com/thread.jspa?threadID=121815
Mark Lansdown - Semi-wireless Wake on Lan (Oct 8, 2008)
http://discussions.apple.com/thread.jspa?threadID=1276830
Pondini - Using Time MACHINE with a USB drive connected to an Airport Extreme
http://discussions.apple.com/thread.jspa?threadID=2299608
Publish date: January 14, 2010
See also the User Tips Library

Ask yourself a question.
How fast is your internet connection?
If it is is 1-2-8 mb speed then you dont need 'n'.
If you transfer personal info between computers fast speeds allowed up to 54 will save you time.
'n' is to provide greater range like Mimo and increased transfer speeds.
But do you really need it?
No,if you dont transfer huge data,
Yes, if you want to transfer (stream video from your iTV from Mac if you spend most of your day in front of TV.
There is no substitute for a good reliable connection.
In my real world experience because I only have a 8mb ADSL connection 'g' is not the strongest and most reliable scenario to use. During the last airport update my last 3 years of uninterrupted airport connections mixed PC and Macs on WDS set up went belly up and I had posted my thoughts as well with the relevant results and now set up is fine. But at a price.
Downgraded to all on 'b' and now use my Draytek Vigor 2800VG and have AEBS put away in storage.
My signal and range is out of this world. When I decide that I have enough free time to sit in front of a TV and download movies and watch them when I have nothing better to do such as travel the world etc. etc., that is the time I will go for speed...or will I.
Dont get bamboozled by the hype. If you really want one wait for a year then decide. Let others solve the teething problems as is there want.

Using a Buffalo Linkstation NAS drive on the Airport Extreme 802.11n

Similar Messages

Maybe you are looking for