Using a CW230 Bi-polar driver with the UMI-7764 and 7330 PCI. But clock level is loaded below 2v and motor will not run?

I have my stepper driver connected to the +step and aogrnd terminals on the UMI-7764. With the driver connected to these terminals the output across the two is 2vp. When I disconnect the driver, the level returns to a 5vp signal. My drivers inputs are optically isolated so I suspect the impedance my be higher than TTL can drive. Is there any way to manually set the output parameters of the 7330 Motion controller?
Thx...Vic 

Hi Vic,
Take a look at this KnowledgeBase:  How Do I get the 73xx Controller and UMI-7764 to Drive a Third Party Stepper Motor?
I think it may have the solution to your problem.  Also, here is another KnowledgeBase that is relavent:
Why Do I have to Supply Power to my UMI-7764?
I don't believe there is a way to manually set the output parameters of the 7330, but I don't think this is the source of the problem.  If the KnowledgeBase articles are not the solution, post back and we'll keep troubleshooting!
Kristen H.

Similar Messages

  • Can i use ANY external CD/DVD drive with the NEW mac mini?

    We just got the newest Mac Mini and want to get an external drive for importing and burning CD's and DVD's.
    Can we use ANY external CD/DVD drive or do we NEED to use the "Apple MacBook Air SuperDrive."
    Thanks
    Eliot

    Maybe.
    I've had some situations where a non-Apple DVD drive would not do a particular job.  When I tried the same project with the Apple SuperDrive everything worked perfectly.
    This is an area where I would not try to save money.
    http://store.apple.com/us/product/MC684ZM/A

  • Using samples on an external drive with the ESX24

    Can anybody help me with this?!:
    I have some Gigastudio Samples on an external drive and I am trying to use them in Logic with the ESX24; I know there is a way to do this by creating an alias somewhere in the library folder in my HD. does anyone know how to do this?
    Please help!

    Yes, EXS will tell you, if you go here by clicking on 'options':
    ...and select Giga convert...
    regards, Erik.

  • Imei no. does not match with the serivce providers records as we had a replacement through insurance co.  service provider will not unblock the phone

    IMEI no on this phone does not match with service providers records as a replacement was issued from Apple in an insurance claim.  The service provider Vodafone will not unlock this phone without proof of purchase which we have but the receipt does not record the EMEI no.

    Contact Apple http://support.apple.com/kb/HE57

  • Can this device be used as an external hard drive with a macbook pro laptop to use files on the airport?

    can this device be used as an external hard drive with a macbook pro laptop and use files on the airport time capsule?

    If you mean an AirPort base station other than the Time Capsule, it doesn't have internal storage.
    If you mean a Time Capsule, its internal drive can be used for regular file storage but shouldn't be; as with all drives, it'll eventually fail. You're better off using a standalone drive and setting Time Machine to back it up as well.
    (112309)

  • Can you use external hard drives with the HP Omni 10 5600US

    Since this a Windows tablet, can you use external hard drives with the HP Omni 10 5600US?
    I know there is a micro-sd reader for additional storage but can you use the usb for external hard drives like a regular pc?
    I tried looking at the spec's for this tablet and it said the usb port was host only. I'm not sure what that means exactly.

    Yes you can.  You'll need to purchase a USB OTG (on-the-go) cable.  I recommend using a drive that has its own power supply but I've successfully used small USB powered drives also.

  • Just bought a 2tb external hard drive with the intention of moving my iPhoto data files on it. I have so much of my 500 gigs being used up by images and video. Questions: Will this foul up my iPhoto app? Do I need to point iPhoto to this new location?

    Just bought a 2tb external hard drive with the intention of moving my iPhoto data files to it. I have so much of my 500 gigs being used up by images and video. Questions: Will this foul up my iPhoto app?
    Do I need to point iPhoto to this new location?
    Thanks!

    Are you running a Managed or a Referenced Library?
    A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
    A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.
    Assuming a Managed Library:
    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • Are drives with the same name differentiated?

    I'm running OSX 10.6.8 and three external drives on which data is stored (a main drive, A-Data, and two backups). A friend may decide to help me with a project and to do so will have to have the same setup. Naming the drives on the second system is of some concern to me, so I did some research.
    The fellow at http://www.cnet.com/au/news/drives-in-os-x-appearing-with-1-appended-to-their-na mes/ states:
    If by chance you mount two drives of the same name, because the system can't create two mount points with the same name it appends sequential numbers to new mount points as they are created, and therefore you will see the numbered drive names in the Finder.
    Unless I misunderstand what he is talking about, I found that I can have two drives with the same name. I can have two drives named A-Data on my desktop. And therein lies my problem (maybe). The project involves Premiere and several of it's sister programs, all of which require external files (video, audio, stills) to be linked, not stored within the working file.
    QUES 1
    Are disks with the same name distinguishable by OSX or software?
    QUES 2
    Assume that
    I am working on a project which is saved on A-Data (and all the project links are to files on that particular A-Data)
    I then connect another disk with the same name (and with the same folder structure), and backup my files to it.
    I then eject the first A-Data and open the project on the second A-Data.
    Will the software say that it can't find the linked files (because they are on the ejected disk), or will the project open as normal?

    Avoid having the same names if at all possible, especially if you use apps that 'link' to the media via the file path.
    The file path is set by the order in which the disks mount, which can change across reboots.
    To see what is going on by using Disk Utility…
    Select the first volume, look at the mount point (a blue link at the bottom of the Window) …
    /Volumes/A-Data
    Now connect the second volume & select it, look at the mount point…
    /Volumes/A-Data 1
    Now reboot, power off the first disk, leave the second one on & power disk one back on when the OS has competed booting. They will show the same paths, but each disk is now the 'other' disk - this makes a big mess for Apps like Premiere.
    The only way to make this work is to clone every file to be identical on both disks, and never use Premiere (or any app that links to media) when both disks are connected. Otherwise you risk linking to media files on 'A-Data' and 'A-Data 1'.
    Premiere must have tools for sharing projects - look at them before using disk names in this way.
    You could however clone 'disk 1' to 'disk 2' & then rename it on the second Mac (to make them identical to fix the paths for Premiere), just avoid bringing them to one Mac with the same disk names. It does make more headaches in future though, because your friend will add new media that you need to migrate back to your disk.

  • I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable.  I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?

    I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable.  I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?

    Download the supplemental fix to 10.7.5 
    http://support.apple.com/kb/DL1599

  • I have lightroom 5 with 5.7 updated.   I use windows.  My problem is with the spot healer or remover.  It worked perfectly when I click on it it don't have the additional circle with a line attached to it where I can move it to another place for better sa

    I have lightroom 5 with 5.7 verson updated.  I use windows.  My problem is with the spot healer or remover in the develop.  It worked perfectly for a while and then suddenly the other circle with a line attached to it where you can move it to a better spot stopped showing up.  I uninstalled the software and re installed it again but it didn't fix the problem and its still the same.  Help please.

    Does the iPod work OK?
    Does it charge when connect to the computer?
    Does it appear in My Computer?
    Look at the dock connector on the iPod. Compare with the iPod that does work/connect.
    I suspect you have a 2G iPod. Those can only go to iOS 4.2.1
    http://support.apple.com/kb/HT1353#iPod_touch_late2009
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

  • Time Machine: Can I use a smaller external hard drive with larger internal?

    Can I use a 250G external hard drive with and 500G unfilled internal drive with time machine? Or will time machine require I a 500G? I don't plan on filling the internal drive for a long time and don't want to buy a new external drive right now.

    Yes, but you are very likely to get in trouble very quickly.
    The problem is that TimeMachine saves multiple versions of any file modified, and if that file happens to be large, you can quickly fill up your TimeMachine drive such that it is throwing away older versions faster than you would desire.
    Also if your boot drive's storage usage gets even close to the 250GB external drive's capacity, TimeMachine is likely to stop working.
    If possible, I would suggest an external drive that is twice as large as your boot drive, or at least 1.5 times larger.
    I guess you could repartition your boot drive so it is smaller than your external disk so you would be less likely to use more space than could fit on the external.
    Personally, my opinion about backups is that much of my data is impossible to replace (family pictures, etc...), and spending money on backup hardware is a small price to pay for securing those memories. I also try to have it backup in more than one location in more than one way.

  • Does anyone use a LaCie external hard drive with their Mac using imovie '09?  I have some questions.

    Does anyone use a LaCie external hard drive with their Mac using imovie '09?  I have some questions.

    Are you actually having a problem with the new Lacie drive, or are you just asking is the Lacie drive somehow different from your old G-Drive?
    From a connection standpoint, most Lacie desktop drives have both USB and FireWire connections, just like the G-Drives do.  You would connect and use it the same as a G-Drive.
    Regarding capturing to the external HD, if you are using a camcorder that has FireWire (iLink) connection, it is not advisable to have an external FireWire HD connected to your Mac at the same time as your camcorder; there are often communication conflicts between the camcorder and the hard drive if they are connected at the same time.  The conflicts usually appear as either dropped frames or a complete freeze.   This is more common with Canon miniDV camcorders but I have also seen this behavior with Sony miniDV camcorders.  (The problem is the camcorder's FW implementation, not the hard drive.)  The workaround is to capture to your Mac's internal HD and later copy the captured video to your external HD.

  • Can I use a thunderbolt storage haqrd drive with my late 2009 iMac?

    Can I use a thunderbolt storage haqrd drive with my late 2009 iMac?

    You do have Firewire 800 and it seems plenty fast for most use. Easy to install and the cradles allow for multiple disks swapping or daisey chain for multiple cradles. 

  • Can you share a hard drive with the current airport extreme

    Hey all!
    I read that you can share USB drives with the new airport extreme. Can you do that with the current ones?
    Thanks,
    B

    Massi65, Welcome to the discussion area!
    You really should start a new thread since your question is about the new square AEBS and the thread started with a question about the previous AEBS.
    With either AEBS you could wirelessly gain access to a hard drive by one of these 3 methods:
    Use a hard drive with wireless networking capabilities. The drive would connect to the wireless network like any other wireless client.
    Use a hard drive with an Ethernet interface. Connect the drive to the AEBS's LAN port.
    Connect a hard drive via FireWire or USB to another Mac and then share the drive from that Mac.
    The new square AEBS offers a new possibility. You can connect a USB drive directly to the new AEBS and share it to devices connected to the AEBS's network.
    What performance could I expect?
    No one can answer this directly since no one has any of these devices to try.

  • How do I share a hard drive with the new iMac to load a disk from macbook pro

    How do I share a hard drive with the new iMac to load a disk from macbook pro. I want to install office for Mac from a disk but dont know how to share har drive from macpro
    thanks

    The new iMac's don' t have DVD drives however almost all have a disk drive. The easiest method of installing MS Office for Mac on your new iMac is to download it from Microsoft and then input the code you received when you purchased your original license. Otherwise you can use the DVD drive on your MBP to install on your iMac, that feature is called Remote Disc. Instructions for Remote Disc can be found at:http://support.apple.com/kb/ht5287

Maybe you are looking for

  • Order by clause in Sub query

    Hi, Can we use order by clause in Sub query? While using the order by clause, I am getting the "missing expression error" . If I remove order by clause query executing fine. Here is my query: select * from emp_mstr where emp_no in(select emp_no from

  • It works on the computer but not on the iPad/iPhone.

    Hello, I am working on a site that I used Dreamweaver and Wordpress to create and I have an odd issue.  The home page here: http://electronic-lifestyle.com It works perfectly on all browsers including iOS.  The blog post below the rotating image is w

  • Sleep not working in Lion

    Hi, I noticed, when I put my iMac (27", i7, late 2009) to sleep, right before I go to bed, it does not stay in sleep mode during the night. In the morning I can hear the fans spin and if I hit a key, the iMac immediately turns on. I had sleep mode is

  • New mp3 player

    If i bought a mp3 player other than an ipod, that is compatable with WMA files, can i easily put itunes songs on the mp3 player? are itunes songs in mp3 format?

  • Home Sharing vs regular iTunes sharing

    We've got a home network where one Mac Mini has all of our music and videos, which are shared to other computers such as Mac Book Pros. This is done by turning on Sharing in iTunes on the Mini, and then accessing that shared library from any other co