Using a domain name with .mac and iWeb

How does one go about linking a domain name to the iWeb pages/ .mac account?
In other words, I don't want to have to give out the long web.mac.com/blahblahblah/site
name, I'd like to just have a domain name.

Dottonedan...
I have replied to your thread over here...
http://discussions.apple.com/thread.jspa?threadID=647660&tstart=0
You might want to have a look at the public DNS service that I posted about.
What you are looking for is basically a domain name server that will accept your domain name and be able to translate the words into the numbers like you mention. That's what DNS servers do. There are LOTS of DNS servers on the internet and once you get your domain name hooked into one the information will propagate within days if not hours, making your domain name functional.
Anyways, look back at the thread you started and you'll see my post there... we'll start there and get you squared away sooner or later, i'm sure.

Similar Messages

  • Using a domain name with the mac site

    If I use a domain name on Site #2, does that mean that Site #1 will automatically have the same domain name?
    I already have a Site #1 up and running. Now I purchased a new domain name that I would like to use only for site# 2. I was worried about going in with any edits to Site #1 just in case it would go to the new domain name instead of where it is right now.
    Any light on that subject?

    If you have 2 websites in the same domain folder the uppermost site or the site that you most recently published will be linked to your domain name. If you don't want it to be then you need to re-publish with the site that you want to be linked to your domain name is uppermost. You can move the sites around by dropping and dragging.
    The easiest thing to do is to separate the sites so that you have site 1 in 1 folder and site 2 in another. Following this, the site that you publish first will be linked to your domain name. If it is not this site that you want then just publish the other site.
    How do you have the first site set up? Is it using CNAME or web forwarding? Have you entered your personal domain name into your .Mac account?
    If you have one .Mac account and two websites and two personal domain names, then you can use CNAME for one site and web forwarding with or without masking for the other site. You can only enter one domain name into one .Mac account.

  • How do I use my own domain name  with Mac server with iWeb

    For a number of years I have had my own domain name that when typed into a browser it would redirect the browser to my site on the .Mac server. I hear with iLife ’08 I can have my own domain name hosted by .Mac so I know longer have to have the long addresses for each pages the I have now for my site (i.e. the http://web.mac.com/thewildhearts/WildheartPhotography/NatureGalleries.html). How do I go about getting my domain name (wildheartphotography.com) so that Mac will host it and do I need to notify the current host that Mac will be hosting my site now?
    Thanks. I really appreciate the help I get from this forum.
    Pat

    It's very easy, really. You go to your domain control and redirect the address. IPower, for example points the domain name very easily: you just type in the URL of your site and it will point to your mac server.
    I've used GoDaddy before and it is a bit more difficult to "point".

  • Using regular domain names with iweb?

    Is there a way to direct a normal www. domain to an iweb-created web site without putting all the extra .mac stuff in the URL?

    Hi Elmeroguero,
    If you buy a domain name at GoDaddy say elmeroguero.com for 10$/yr you then will be able to access the site you publish on .mac by entering elmeroguero.com.
    EVERYTHING ELSE is business as usual. You publish your website by hitting publish button in iWeb and so on just as you did until now. All your pages are stored on .Mac and so on. The only thing changing is how you can access your website from browser (nevertheless you will also still be able to access your website typing the web.mac.com/username/ address).
    Regards,
    Cédric
    (Difference between WebForward, WebForward with cloaking and CNAME:
    -WebForward: after you typed elmeroguero.com in the browser you get forwarded to web.mac.com/username/ and web.mac.com/username/ will display in the browser
    -WebForward with Cloaking: after you typed elmeroguero.com in the browser elmeroguero.com will display in the browser and don't change while people browse through your website
    -CNAME elmeroguero.com will display instead of web.mac.com/username/ and while browsing through your website it will look like elmeroguero.com/sitename/nameofpagepeoplelookatnow.html)

  • Using Personal Domain Name with iWeb08

    As per instructions I have setup my domain and made the changes to the Cname records with my Domain Registry ( https://cp.domaincentral.com.au). Domain is noted at the bottom of iWeb as I would expect and also if I upload I get the notation that the page will be seen as the domain.
    Page cannot be found on my domain. I can see with the generic .mac address fine.
    Cname Info:
    jimleonard.net.au. CNAME web.mac.com. 3600 Manual Active Yes
    Have I missed somthing?

    Okay, I have waited a period of 48 hours for updates to be be done with my domain name:
    jimleonard.com.au. NS dns1.domaincentral.net.au. 3600 Auto Active Yes
    jimleonard.com.au. NS dns2.domaincentral.net.au. 3600 Auto Active Yes
    jimleonard.com.au. CNAME web.mac.com. 3600 Manual Active Yes
    jimleonard.com.au. A 17.250.248.34 3600 Manual Active Yes
    www.jimleonard.com.au. CNAME web.mac.com. 3600 Manual Active Yes
    Config is fine @ .mac:
    Personal Domain
    .Mac is configured to host your domain:
    www.jimleonard.com.au
    If you entered the correct settings at your registrar more than 48 hours ago and your iWeb site still doesn't appear at your domain, try these troubleshooting tips.
    I have also made changes and uploaded to"all.mac" I am still unable to see the site with the Domain, all is fine as the .Mac address:
    http://web.mac.com/jimleonard/Travel/Jim_and_SuzieTravels.html
    Have I missed the point?

  • How can i use external hard drive with mac and pc!

    I've been using a Lacie external hard drive with my mac to keep the itunes library and other things since day one. Since i have a dvd with files for windows and an old pc without a dvd drive, i decided to copy and paste the content of the dvd to the external hard drive. The only problem now is that when i plug the external hard drive to pc, it won't open. I know it has to be formatted in a different way, but i need to find out the best solution!
    Any idea?

    You can format the external drive in Fat32 (which I don't recommend but is the most compatible between both platforms), or NTFS (which requires some work to get your Mac to recognize), or HFS+ (which requires special software on your PC so your PC can use it).
    If you use this drive mostly with your Mac, get MacDrive for your PC:
    http://www.mediafour.com/products/macdrive
    If you use this drive mostly with your PC, here's some software for you Mac. I haven't tried this myself, but the professional reviews have been good:
    http://www.paragon-software.com/home/ntfs-mac/

  • Using a Domain name with embedded PL/SQL Gateway

    Hello all
    I wish to link domain name to an application
    e.g. www.mydomain.com goes to application 100
    or www.ano.mydomain.com goes to application 135
    I have successfully done this in the past using HTTP server.
    My new installation does not used HTTP server ... I have only configuration Embedded PL/SQL gateway
    Can I route using embedded PL/SQL gateway a URL to an application?
    Thanks
    Pete

    PS ... I am using APEX 3.1 with 11g

  • Using/Syncing Lightroom 2 with Mac and PC

    I'm using Lightroom on a couple of machines. My main desktop is a Mac and a Mac laptop while on shoots. I have a partner in the office that works on a PC to work with clients, is there a way to sync the Lightroom catalog between machines, like between the Mac and the PC if they're on the same network?

    I too am having difficulties with this. I used to have a PC desktop & laptop, and used sync products such as Microsoft Live Mesh and/or Foldershare to sync the catalog between my two machines.
    I have recently replaced my laptop with a MacBook, and now have problems with synced catalogs. On my MacBook, it shows that it cannot find the picture files imported on my PC, and my PC cannot find picture files imported on my MacBook. Its ultimately due to the pathname associated with the picture (i.e. a MacBook does not have a C:\... in the path).
    Is there any solution to this to allow the PC & Mac catalogs to sync between machines seamlessly?

  • Easiest way to use one bt device with mac and iPhone?

    What's the easiest way to use one bluetooth device with both Mac and iPhone? (Not a the same time.) I have it working with a voip phone on my mac (x-lite), or with the Bria voip app and the ATT line on my iphone.  What I want is step by step how to accomplish the transition with the fewest clicks. I understand that I can't use it with both the Mac and the iPhone at the same time, and that's acceptable.
    But it's tedious, and I would like to switch it back and forth several times a day. 

    You might be thinking of Crossover. Not sure if Windows Media Player works under it, but their website has info on requested and working apps.
    Best of luck.

  • Domain name with DNS and VPN query

    When inside our VPN network computers dont recognise the domain name and have to use the direct IP address of the server to access services. Is that normal? Outside the domain works fine. In my Zone settings the machine IP address is the actual server IP. Should it be resolving to the VPN router's IP?

    Please explain your setup a bit further.
    What machine/router (gw) is doing VPN and what machine is doing DNS?
    If the LAN is using private IPs, VPN clients and LAN clients should be using only the same private IP DNS. Public IP DNS doesn't know about your private IP network.

  • Design a site, use my domain name, and host it via .mac

    It sounds simple, and I thought a search through these forums would yield some easy answers, but no luck, so here goes:
    I'm an advanced Photoshop and Final Cut Studio user, running an audio/video/image restoration and transfer business, but I'm a total beginner in the iWeb/.Mac area.
    About three years ago, I decided it was time for a web site, so I went to a local company; they designed and still host my site, for which I pay them $30.00 per month; it's a simple site with no ecommerce, and six or seven pages. There is a contact form through which potential customers can email me.
    I also have a domain name, for which I pay $15.00 per year to the same company.
    My site is OK, but it's the same as it was three years ago; any small changes I have asked the company to make (mostly just text additions/changes) they have done at the rate of $75.00 per hour.
    What I want to do is cancel my account with them, design a totally new site using iWeb, start a .mac account, and have the site hosted using my domain name, so that the average customer who sees my newspaper ad can navigate to my new site exactly as they can with the current one. (I only have one email account, through my ISP, which I don't want to change.)
    I've got lots of questions, but mostly, what else do I have to do to make this switch besides cancelling my account with my current company? (After an overlap period, of course) What happens with my domain name--who will I pay to keep it? And finally, what simple things am I not thinking of?
    Many thanks in advance to anyone with enough patience to read through this, and still find time to provide some assistance.

    You can design your site in iWeb and upload it to either .Mac or a commercial server.
    You would then provide the domain name registrar with your server ID number or, in the case of .Mac, your .Mac URL and instruct them to point your domain name in that direction.
    .Mac is neither intended for, nor the best option, for a business site.
    For example the company I host with - Host Excellence - allows you a free domain name registration and up to 6 sites with unlimited web mail and more server space than you are likely to need for about the cost of a .Mac account.
    Commercial servers are a lot more reliable than .Mac, have wider bandwidth and usually have good tech support.
    You only have to look at the number of problems in this forum concerning .Mac to see that tech support is not readily available from Apple.
    I'm not putting down .Mac. I use it myself for various purposes and it is good for its intended use of one clicking publishing of personal websites.

  • Can i use a personal domain name with iweb 06?

    I have 2 personal domain names. and i read some where that i can host with.mac and still use my personal domain name. does any one know how to do that or is that just a feature with iweb 08. i bought this comp in 07 new so guess its iweb 06 or 07. little help here?

    AlexandreaJane:
    Welcome to the Apple Discussions. Yes you can. See: http://discussions.apple.com/thread.jspa?threadID=1164519&tstart=0 and Personal Domains.
    OT

  • I have a domain name with go-daddy can i use iweb to create my page?

    I'm trying to help a friend set-up a website.  he has a domain name with go-daddy but hasnt set-up the web page at all can i use iweb and upload it to the domain name he already has bought?  I'm a first time iweb user please help!!

    Your friend needs both a domain name and a web hosting account in order to get his website online.  If he has both with GoDaddy.com then yes, you can create and upload the site. 
    If he has purchased only a domain name he'll need to get a hosting service.
    OT

  • I want to use a domain name and I have alot of questions. please help!!!

    If i switch to a domain, will i be able to se all of the iwebs features?
    will i have to pay for a domain and .mac subscription?
    It says i used up 17mb of 25mb on my idisk, once i hit 25 what happens?

    ok well lets say i want to use a domain name such as
    www.mywebste.com. if i forward it then all u have ot
    do is type in www.mywebsite.com and it will bing u to
    web.mac.com/whatever?
    Yes.
    If i do it this way will i
    still be able to use all of the iwebs fatures such as
    blog comment, hit counter...?
    I think so, but since I don't do this I don't know for sure.
    also if i do it this way will i have to pay for the
    .mac subscription too?
    Yes, if you keep your site physically on .Mac you have to pay for it.
    can you send me a website where i can find lots of
    effects i can use in my iweb page because the effects
    on iweb are very limited.
    The best thing for you to do is search this forum using the term for the effect you are interested in.
    If you find iWeb too limited and don't find workarounds in this Forum for adding the effects you want, you can consider using another app. Here is one list:
    http://www.pure-mac.com/webed.html

  • How do i use my own domain name with creative cloud?

    how do i use my own domain name with creative cloud?
    i don't want to post web pages from behance.net. i want to use the domain name i have for my material. is there a hosting service for this? if not, can someone give me some pointers so I can publish?
    thanks!!
    Lori

    http://forums.adobe.com/community/behance is where you would ask about publishing to "something else" from that program
    I use OLD Dreamweaver, and upload my HTML with an FTP program to my own web site... I will GUESS you can do that, if you can save HTML to your hard drive to then be able to upload to your web site

Maybe you are looking for

  • Functional Specification For Opening And closing stock On Particular Date

    Dear Gurus, I am creating report for opening and closing stock on particular date in which batch and storage location should also be included. I want to know the tables and fields for the same.I have searched the forum and got report on month basis b

  • Error while updating PO - 'This document is locked by another user. Please

    All, While updating the PO through API (Oracle Version - 11i) we are getting the error message 'This document is locked by another user. Please try again later.' intermittently. We are using below API to update the PO through interface program. po_ch

  • Message not working

    I upgraded my iPhone to iOS 7.  Now Message is permanently 'offline' on my Mac.  Don't know if they're related.  Also, I have never been able to sync text conversations with anyone except one iPhone user, although I carry on several conversations wit

  • Dual HDMI

    Can a Mac min 2012 support dual hdmi outputs via onboard HDMI port and mini display to HDMI adapter simultaneously in video mirroring or extended desktop mode?

  • TFS 2010 with Active Directory 2012 R2

    Are there any known problems using TFS 2010 with Active Directory 2012 R2? Domain controllers are being updated from 2003 to 2012 R2, and the Domain/Forest mode will be set to AD DS Server 2012R2, value=6. James Bristow, Software Configuration Manage