Using a FCB1010 with Sooperlooper

Hey Guys,
I have been experimenting with Mainstage as a Acoustic guitar rig. I have been using Sooperlooper for about 6 months with Ableton Live. But the possibility of Concert level effects and the graphic representation of controls is intriguing. Mainstage is buggy, but isn't everything? And Logic/Mainstage sounds so good.
The problem is this, when using the FCB to control Sooperlooper, I can't get the buttons to work the way I need to.
Example. To record a loop I press record. No problem. But If I press overdub instead of record to end the initial recording. The next time I press record, it is basically returning that control back to off position. It should already be in that state. In other words, by pushing any other button, the previously pressed button should be turned off.
I have tried changing the style of buttons in the inspector, but since Im using Note On/Off, there doesn't seem to be an alternate setting for Notes. Is the answer to use CC's"
Any thoughts or guidence would be appreciated. This seems to be last hurdle in reaching my goal for the week.
Thanks
C

To answer my on posting. No, this cant be done. As of right now MIDI note data cannot be used for both alternate and momentary functions.

Similar Messages

Using the FCB1010 direct, or through an Interface

Hi,
I am wish to use my Mac to create the effects I wish to use for my playing (guitar) with Logic and Mainstage. I will need a foot controller, so I am considering the FCB 1010 (as many have). I will also be purchasing an interface which will allow me to record, and sing. I have a couple of questions:
1 - is it better to plug the FCB1010 directly into the computer when using it with mainstage, or can I use the MIDI IN/OUTs on the interface?
2 - would I be better of sending the output of the interface to my aplifiers, or powered monitors?
3 - if I had a mc + the pedal baord plugged into the interface (assume the answer to 1 allows me to do this), will the output of both go to the lineouts of my interface (say a presonus for example...)
4 - if the answer to 3 is yes: would I be better with a Firewire or would a USB interface be ok (I understand that firewire is always better for latency, but if I could use a USB with satisfactory results... that may be ok)

Hi RLRL,
1 - you can only connect FCB1010 by MIDI IN/OU not USB (directly). But it´s very easy. Any hardware with MIDI IN/OUT can be connected to the FCB1010.
2- Depending on what you want to do. Please be more specific (use a guitar amp, use monitors in studio)
3 - In Mainstage/Logic you can configure and route any input to any output of your audio interface. So yes
4 - The answer is: firewire BUT there´s no diference if you just use a few tracks in/out USB is most capable, but use firewire, and if you do that you can still leave a free USB slot for others things
Hope i´ve helped you.
Bruno Filipe

How do I use your iPhone with multiple iTunes libraries

Hi, I have my music spread out between 3 seperate Itunes libraries on 3 different profiles on my computer. I have the newest generation Ipod Nano, Ipod Shuffle, and Iphone 4s. My Ipod's are both full, so I've decided to start putting music onto my phone. With my Ipod's, I can plug them into one profile on the computer, download the music on the Itunes library that exists on that profile, then do the same with the other profiles with no issue. However when I try to do this with my phone, It asks me to erase the music I have gotten from one Itunes library and sync with the current library, as soon as I plug it in to a different Itunes on one of the other profiles. I have my Iphone configured with the Manually manage music option, and I still haven't found a way to use my Iphone with multiple music libraries. PLEASE HELP

http://support.apple.com/kb/PH12113 - If you use manual syncing, you can sync items from more than one iTunes library to your iPod. (You can sync iPod touch, iPhone, and iPad with only one iTunes library.)
http://support.apple.com/kb/HT1202 - When manually managing content, you can add content from multiple libraries to your iPod or iPad. Even when manually managing music, some content may be available from only one library at time. This includes all content on iPhone and video content on iPod and iPad.
They seem inconsistent as far as the iPad is concerned but in both articles the iPhone appears to only be able to sync to one library at a time.
Troubleshooting Home Sharing - http://support.apple.com/kb/TS2972

Using multiple desktops with a 4 finger swipe on a Mac Book Pro running Lion- is there a way that I can allow Safari open on several but not all?? Looks like I can set it for one but not others. All, one, or nothing

Using multiple desktops with a 4 finger swipe on a Mac Book Pro running Lion- is there a way that I can allow Safari open on several but not all?? Looks like I can set it for one but not others. All, one, or nothing

Hey Eric,
Thanks for taking the time. Unfortunately no that does not solve it. Same as swipe it will get me there and it will show separate programs spaced out. The issue I am having is that all my open word files are bunched up in a pile on top of each other. I can see the edges of each one but I want them to be separated from each other enough that I can visually identify what file is what.
Again, thanks for trying, it is appreciated.

Error while using between operator with sql stmts in obiee 11g analytics

Hi All,
when I try to use between operator with two select queries in OBIEE 11g analytics, I'm getting the below error:
Error Codes: YQCO4T56:OPR4ONWY:U9IM8TAC:OI2DL65P
Location: saw.views.evc.activate, saw.httpserver.processrequest, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 27002] Near <select>: Syntax error [nQSError: 26012] . (HY000)
can anyone help me out in resolving this issue.

Hi All,
Thank u all for ur replies, but I dint the exact solution for what I'm searching for.
If I use the condition as
"WHERE "Workforce Budget"."Used Budget Amount" BETWEEN MAX("Workforce Budget"."Total Eligible Salaries") AND MAX("Workforce Budget"."Published Worksheet Budget Amount"",
all the data will be grouped with the two columns which I'm considering in the condition.
my actual requirement with this query is to get the required date from a table to generate the report either as daily or weekly or monthly report. If I use repository variables, variables are not getting refreshed until I regenerate the server(which I should not do in my project). Hence I have created a table to hold weekly start and end dates and monthly start and end dates to pass the value to the actual report using between operator.
please could anyone help me on this, my release date is fast approaching.

Are there advantages to using Adobe Bridge with Premiere Pro?

I frequently use pictures with my videos. Normally, I use Windows Explorer with the picture viewer to browse for what I'd like to use. I've experimented with Bridge, finding it to be a memory hog and slow. It got me wondering - Are there advantages vs. Windows Explorer?

Bridge can be used to easily add hierarchical keywords to large amounts of clips (and afaik it's the only tool in the Adobe suit that can do hierarchical keywording with video files). Those keywords can then be used to find clips inside of Premiere. On large projects (1000+ clips) that can be a life saver.
Apart from this and the features you mentioned (the cross software color stuff is useless for video as of CS6), I did not find any use to Bridge for video. Plus as you said, it is a memory hog, slow and in my own experience unstable with / not adapted to video.

Using AJA IO with the FCP Voice Over Tool

Has anyone used the io with the VO tool? I have gotten it to work in the past, however, there are a number of convoluted settings to go through to get it to work. It seems intermittent. Today it doesnt want to work at all.
Does anyone have a list of the specific A/V settings, Capture presets, etc, that i need to have set in order for this to work?
FYI--I have never had a problem capturing from tape--(using log and capture with beta, digibeta, dv, vhs)--only when capturing analog audio using the VO tool.
gracias.
dk

You can do it here, in the Audio/Video settings under the Final Cut Pro menu. Click on the Capture Presets tab, then go to Generic Capture Template, duplicate it, then edit. Give it a name that you can recognize when you need to set up your project.

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

How do I use a DAC with my Airport Express ?

Hello,
Can I use a DAC with Airport Express ? If yes, how ?
TIA

check out this CNET Crave article: Using Apple's AirPort Express with a DAC: A how-to guide

How do I use my ipad2 with apple tv

How to connect and use my ipad2 with apple tv---the laptop works but can't get apple tv to recognize iPad

The iPad only words with it by using it A's AirPlay output

How do I use my ipad with Apple TV?

How do i use my iPad2 with Apple TV?

If it's an ATV2 or 3, you can use AirPlay. AirPlay automatically becomes available when the two devices are on the same Wi-Fi network.
HOWEVER! You should be aware of that AirPlay is, in some circumstances, far inferior to VGA / HDMI-cabled solutions. Please see my posts at https://discussions.apple.com/message/18697551?ac_cid=sa123456#18697551 for more info.

How do I delete an associated device in iTunes) namely my iphone 6 (8.1) I am using an imac with Yosemeti

How do I delete an associated device in iTunes) namely my iphone 6 (8.1) I am using an imac with Yosemeti

Howdy nzh50,
It sounds like you have a device associated in iTunes with your Apple ID that you would like to remove from your account. This article should help you out there:
iTunes Store: Associating a device or computer to your Apple ID
Removing an associated device or computer from an Apple ID
To remove a device or computer from your Apple ID:
Open iTunes.
Sign in to your Apple ID by choosing Store > Sign In from the iTunes menu.
Choose Store > View My Account from the iTunes menu.
From the Account Information screen, click Manage Devices.
Click the Remove button next to the device name you would like to unassociate.
Note: Removing a device from your Apple ID does not override the 90-day timer. You must wait 90 days from the day the device was first associated with your Apple ID before it can be associated with another Apple ID.
Thank you for using Apple Support Communities.
Take care,
Sterling

How do I activate a used iPhone 3 with no SIM card for use as an ipod touch?

How do I activate a used iPhone 3G with no SIM card for use like an iPod Touch? It was apparently on AT&T previously and I have another iPhone 3 that is active on AT&T if that is helpful. Thanks!

Copied from the link provided.
Follow these steps to use your iPhone without a wireless service plan:
Insert the SIM card from your new, activated iPhone or one that was previously used to activate the original iPhone.
Connect the iPhone to iTunes on a computer connected to the Internet.
Once iTunes activates the device, you're free to use the iPhone as if it were an iPod touch.

CR Server 2008 / Using openDocument interface with a no-logon wrapper

Hi, all!
I had a problem with the openDocument.jsp interface and a no-logon wrapper which took me quite a while to figure out. I'm now posting these results here in the hopes that someone else will find them useful. Of course, if anyone has input how to improve the solution, it's also welcome!
The system on which this was developed and tested was a vanilla Crystal Reports Server 2008 installation on Tomcat / MySQL / Windows Server 2003.
The problem was that calls to openDocument interface left sessions open and this quickly led to the situation where all the concurrent access licenses (CALs) were used. It seemed nondeterministic when a session was released; it could have been minutes or hours.
The solution: write a HTTP session timeout listener which logoffs the CRS-backend session. (The code below has still some dubug output enabled.)
package fi.niscayah.util;
import com.crystaldecisions.sdk.framework.IEnterpriseSession;
import javax.servlet.http.*;
import java.util.Date;
import java.util.Enumeration;
import java.text.SimpleDateFormat;
public class KillSession implements HttpSessionListener
    public void sessionCreated(HttpSessionEvent event)
        debug("sessionCreated()", event);
    public void sessionDestroyed(HttpSessionEvent event)
        HttpSession session = event.getSession();
        try {
            java.util.Enumeration name = session.getAttributeNames();
            while (name.hasMoreElements()) {
                String attributeName = (String)name.nextElement();
                Object attribute = session.getAttribute(attributeName);
                if((attribute != null) && (attribute instanceof IEnterpriseSession)) {
                    debug(" attribute : " + attributeName);
                    debug(" type      : " + attribute.getClass().getName());
                    IEnterpriseSession ies = (IEnterpriseSession)attribute;
                    ies.logoff();
            debug("sessionDestroyed()", event);
        } catch (Exception ex) {
            debug("sessionDestroyed() exception");
    private void debug(String msg)
        SimpleDateFormat sdf = new SimpleDateFormat("HH:mm:ss");
        String timestamp = sdf.format(new Date());
        System.err.println("[KillSession] [" + timestamp + "] " + msg);
    private void debug(String msg, HttpSessionEvent event)
        HttpSession session = event.getSession();
        String id = session.getId();
        String context = session.getServletContext().getServletContextName();
        debug("[" + context + "] [" + id + "] " + msg);
(If you want to test the above code, create a .jar package out of it and put it in webapps/OpenDocument/WEB-INF/lib.)
Next we need to register our listener. I noticed that the openDocument-webapp's web.xml-file already contained a listener definition that claimed to expire enterprise sessions on HTTP timeout. I never saw such results; I tested it by registering my own listener, which only outputted debug information, and then when ever a session timeout happened, I checked the amount of licenses in use via the CMC - it never dropped predictably.
So, comment out the SessionCleanupListener and add KillSession.

<listener>
    <listener-class>fi.niscayah.util.KillSession</listener-class>
</listener>



After the above, change the HTTP session timeout to something more suitable. If you're creating really big reports, one minute might be too little. Also notice, that the value is an approximation. The timeout event might happen just as one minute has passed, but usually it takes more.
<session-config>
    <session-timeout>1</session-timeout>
</session-config>
Now we're good to go and test the openDocument interface. The result should be that every time a HTTP session timeouts, an enterprise session (which was initialized via the openDocument call) is logged off.
Next the no-logon wrapper.
I found a lot of examples for logging in automatically, but every one of them exhibited a strange behavior (at least when used in conjunction with the openDocument interface) where the session count was increased by two. A lot of head scratching later, the solution below was devised.
<%@ page language="java"
    import = "com.crystaldecisions.sdk.framework.CrystalEnterprise,
              com.crystaldecisions.sdk.framework.IEnterpriseSession,
              com.crystaldecisions.sdk.framework.ISessionMgr,
              com.crystaldecisions.sdk.exception.SDKException"
%>
<%
ISessionMgr sessionManager = CrystalEnterprise.getSessionMgr();
IEnterpriseSession entSession = sessionManager.logon("Guest", "", "<server>:6400", "secEnterprise");
String entToken = entSession.getLogonTokenMgr().createWCAToken("", 1, 1);
// So that this can be logged off when the session timeouts
HttpSession httpSession = request.getSession();
httpSession.setAttribute("nologon_SESSION", entSession);
String query = request.getQueryString();
String redirectURL = "http://<server>:8080/OpenDocument/opendoc/openDocument.jsp?" +
    query + "&token=" + entToken;
response.sendRedirect(redirectURL);
%>
You can put the above .jsp-file where you like, but I dropped it in webapps/openDocument, since it's no use by itself.
The use of nologon.jsp is simple: use it as you would openDocument.jsp.
And there you have it. A word of warning though, if you're not sure what you're doing, I wouldn't recommend trying these things out. And you certainly shouldn't deploy these on a production environment.
As said before, any input is welcome!

I'll comment on the BusinessObjects Enterprise logon tokens that you may generate via the Enterprise SDK.
DefaultToken - this is used for failover - i.e., if the original EnterpriseSession object is destroyed without having logoff() method invoked, the failover can be used to re-connect to Enterprise without redo-ing authentication. This token is immediately invalidated with EnterpriseSession.logoff().
CreateLogonToken - token represents an EnterpriseSession independent of the original EnterpriseSession that generates it. So you should generated the CreateLogonToken and log off the EnterpriseSession before using the token, or you'll have two licenses being used.
CreateWCAToken - the Web Component Adapter token - this token is tied to the EnterpriseSession used to create it. If this EnterpriseSession is invalidated, the WCA token can no longer be used. Since this is essentially re-use of the original EnterpriseSession, license count is not increased with its use.
So in your application, you're generating the WCA Token, and using the Session Listener to explicitly log off the originating EnterpriseSession. The SessionCleanupListener is for cleaning up sessions created within InfoView on Web Application Server Session timeout.
Sincerely,
Ted Ueda

When I click on an email address on a web page, a page no longer opens in my email program. Not sure if this is a problem due to Firefox or due to recent installation of Office 2010. I use a PC with Vista.

When I click on an email address embedded in a web page, a page would open in my email program with this address in the "To" line. I recently installed Microsoft Office 2010 and now when I click on an email address nothing happens. I am not sure if this is due to Office 2010 or a Firefox problem. I use a PC with Vista.

https://support.mozilla.org/en-US/kb/change-program-used-open-email-links

Using a FCB1010 with Sooperlooper

Similar Messages

Maybe you are looking for