Using a filter to find Masters, only

I have a very large Managed Aperture library and want to filter out all the Masters while I do some cleanup = since if I then delete something it will not be a master and that won't be as much a problem. I thought of using the Adjustments are NOT applied filter == would that find all the masters or is there a better filter???
I can eye ball the pictures and delete dups but it might be much easier to get the masters off the front first and then deal with the remaining pics and whether they are dups...

kathy, Can you validate this?
>>>
From: Kathy J. Mikich<[email protected]>
To:novell.support.groupwise.6x.other-gateways, novell.support.groupwise.7x.other-gateways
Date: 8/5/2007 11:54 PM
Subject: Re: Using a connector to sync addresses only (not mail routing)?
I believe if you install the Exchange Gateway then go to optional gateway
settings you can choose if you want dir synch both directions and or mail to
flow there but the other way to make this work would be to install the
gateway use it for dir synch then change the link type to be a GWIA gateway
link so that the mail would go out the GWIA. I will check this out and let
you know once I have.
>>> On 8/3/2007 at 12:04 PM, in message
<H6Ksi.2260$[email protected]>, Joe
Walters<[email protected]> wrote:
> Does anyone know if it's possible to use the GW to Exchange connector (or
>
> some other mechanism) so that it synchs the address books
> bidirectionally,
> but routes messages via SMTP (not over the connector)?
>
> If I understand correctly, if you implement the GW Exchange connector
> for
> address book syncing, it also MUST be used for mail routing as well. We
>
> would much prefer to use SMTP routing for message flow, and not have it
> go
> over the connector.
>
> Is this possible?
>
> Or is there perhaps some other way to share email address information
> between the two environments while still using SMTP for mail routing?
>
> Thanks!
> Joe

Similar Messages

Mac pro too slow to use, spinning ball, no finder response, only hard power off, installing system stalls at 18 minutes left.

mac pro too slow to use, spinning ball, no finder response, only hard power off, installing system stalls at 18 minutes left.
It is taking an hour to power up and mac apple logo appear onscreen. No finder controls or "clicks" are being recognized. Spinning beachball all the time.
Using hard power off and holding the mouse down, I was able to open the optical drive and then restart with "c" and ask the dvd to reinstall the system, but it has stalled before finishing the installation.
This happened about 4 days ago, first it started responding slowly, and then it just keeps spinning the beachball. I can't find hardware test. I did run etrecheck, it did not have any error messages, but I can't copy or move the data anywhere.... I am not able to access the mac pro with another machine, and now I am stuck in install freeze, so I can't copy etrecheck by hand onto a piece of paper.
Without being able to finish a reinstall, what can I try?
After it got bad, and before it got REALLY bad, I managed to repair permissions, but it took a long time. Most of a day. When I restarted from that, things were only worse.
Mac Pro 1,1 , 11 GB ram, 7300, 5TB hard drives, OS 10.6.8, the drive containing the system folder is/was 700 used, 290 free. While I could get commands to respond, I put Activity monitor on the desktop and watched it. System memory was 3.31 GB used, about 7 free, and some wired. No app was using a huge amount.
what should I try next? I put a bid on a new/old machine so that I could move the 4 hard drives over.

Thank you for all your suggestions. Please correct me as I articulate this.
I have three versions( 5, 6, CC) of the Adobe Master Collection which I keep active for different clients. I have final cut and motion. I have Office 365. I have a collection of graphic apps that are individually not too big but in all, my app folder is 65GB and my bootcamp partition is 61GB. I can't fit all this on 120 ssd and a 256 will be full once I install, correct? drives should be half open?
Somehow I did not make it clear enough that I was trying to copy onto a 2TB drive I had just initiallized in order to try and save files from my startup drive. I don't use time machine. I take a day or a few days worth of documents and physically move them to another drive at night. If a series is finished I make two dvd's as well. The second black drive that was failing was the drive I moved my backup documents onto. At no point was I trying to backup onto the failing drives. I was trying to copy off both of them onto the other two drives, a third aux backup that has been there for a while, and a newish 2 TB which I designated as the startup drive when all this trouble started.
I wondered if there were any good techniques for trying to get the data off the failing drive. Thanks for the suggestion of Data Rescue 3. I don't have it yet, but I will try it as soon as I get it. I was never trying to repair in place.
I am very interested in getting a pci bracket and an ssd, but I may wait until I can afford the larger one. If I get an older bracket that is compatible with my old mac pro 1,1 , I'd like to be able to move it to a mac pro 3,1 if I get one. Will the larger ssd drives be compatible with the sata in a pci bracket that can work in my mac pro 1,1 ? sata 2 versus something else? If 240 or 256 is my size limit, how much more than my 65 and 61 GB partitions can I put on there? How much of a scratch disc can I make if I leave another 39 GB of headroom on my bootcamp partition? I'm filling 165 GB without making any allowance for temp files.
You have said that 120 is enough for any system. I think I must be misunderstanding something. Are you saying that assuming that most people run office and photoshop and maybe lightroom?
I have and use 4 HDD in this machine, mostly for document storage in two places.
I took out all but the group of 2GB ram chips I bought a year and a half ago. The old ram had passed the hardware test the last time I had access to the hardware test. Two black drives failed, one was a year old and one was a year and a half old, and that it may have been exacerbated by the heat wave. I don't know why the video and the monitor were affected save that the startup drive was failing. I am trying to replace the card.
With all this said, I am also looking at a used mac pro 3,1 with a better video card since a newer machine will likley be compatible through another OS upgrade. If a machine costs only a little more than a new card, it might be a better way to go.
I don't have any sources that offer an ssd for 100. ( of a size that is useful)
How large is your application folder?

Using get-aduser -filter to find blank spaces only

Hello all,
What I'm trying to do is pretty simple. I want to use the -filter parameter of the get-aduser cmdlet to find a defined attribute that only contains a space. For example, I want to find any users that have extensionattribute1 equal to " ". I've
tried the following code but I get the error "the search filter cannot be recognized":
get-aduser -filter {extensionattribute1 -eq " "}
What I don't want to use is -like "* *", as that will give me values that contain a space anywhere. I only want to return users that have extensionattribute1 equal to one space.
Any ideas?

Yes, in LDAP syntax you can escape any character with the backslash escape character followed by the two character hex ASCII representation of what you want. You can get foreign characters this way. More on escaping characters here:
http://social.technet.microsoft.com/wiki/contents/articles/5312.active-directory-characters-to-escape.aspx
Richard Mueller - MVP Directory Services

I have a iphone 4s with ios 8.3 and I used to be able to sync only a week or two of emails from outlook email. Now it won't let me do that and it syncs all my inbox. How can I change it back to sync less. I can't find the right place.

I have a iphone 4s with ios 8.3 and I used to be able to sync only a week or two of emails from outlook email. Now it won't let me do that and it syncs all my inbox. How can I change it back to sync less. I can't find the right place.

I understand, as that was the place I would change it before 8.3 but now that option of Mail Days to Sync is not available? Any idea why that would be?

My JPEGS are no longer being copied over to Finder. Only a random fraction are copied. It use to work perfect. Is there a bug in the updated versions of iPhoto?

My JPEGS are no longer being copied over to Finder. Only a random fraction are copied. It use to work perfect. I can move them 4 or 5 at a time, but it is very time consuming. Is there a bug in the updated versions of iPhoto?

OK - here is what I've done in the past. As I want to be able to save my photos on a DVD that can be read by both a PC and a Mac, I am burning them in Finder. I start by downloading into IPhoto. I'll flag and edit the ones I want to print or post to the web. After that I want to take all the keepers and move them from IPhoto to various files I create in the document section of Finder. I've done it both ways in the past, copy and paste or just drag over, all the files would transfer over. Now there may be dozens of pictures that do not move over - very random, in one case there were only 6 photos and the 3 vertical ones did not copy over.
I'm wondering if this is a software issue or if there is just too much data being moved around. FYI there are 2 Nikon cameras I use and the files from both do this.
Thanks

HT201365 Using the app "Find my iPhone", I activated lock my iPhone remotely from my iPhone to my sons iPhone. How do I deactivate it for him to use? It says emergency calls only now..

Using the app "Find my iPhone", I activated lock my iPhone remotely from my iPhone to my sons iPhone. How do I deactivate it for him to use? It says emergency calls only now..

Welcome to the Apple Community John.
Enter the pass code you set up when locking the phone or the screen lock code already in use on the phone if you weren't required to set one up when you locked it.

Replacement Path variable cannot be used in filter

After creating a variable of type replacement path with query I get the error message:
Errors: Variable ... cannot be used in 'Filter' 'Default Values'; remove
Does anyone know what is causing this message and how to prevent it?
Thanks.
Regards,
József.

Thanks for your response Bhargava,
Your answer did help me find the solution. When using a replacement path variable with query, you can only use the variable in the Characteristic Restrictions part of the Filters (not in the Default Values).
The characteristic itself can still be used for navigation.
p.s. Found that when copying a query some links to structures, like restricted key-figures, are kept in the metadata repository, even after removing them from the query. This can also cause error messages.
Regards,
József.

"Using the Filter HUD to Search for Referenced Files" (and "Locate Referenced Files")

I am trying to follow the Help Documentation item "Using the Filter HUD to Search for Referenced Master" (not sure if there is a way to post a URL to this) and I am not seeing what it is telling me to do.
I am going to Edit > Find and it is telling me to "Click the Filter HUD button beside the search field in the Browser". Is this referring to a browser in the Aperture UI or is this in the Filter HUD display? I am not finding this.
Also, it saying that in the Filter HUD I should "choose File Status from the Add Filter pop-up menu, and select the 'File Status' checkbox." and I am not seeing this either. Does anyone know where this is at?
Lastly, I see that there is a command called File > Locate Referenced Files and when I run this I get a "No Referenced Files in the /current/ selection. I have realized that I don't quite understand whether I am running this search for a specific Project and/or whether I have to make a specific selection in the left hand pane when I run a FILTER HUD or whether this automatically defaults to search the whole database. Does it matter what I have selected in the current Browser View when I run either of these commands?
Thanks for any help in my getting this working better for me.

hotwheels 22 wrote:
I am trying to follow the Help Documentation item "Using the Filter HUD to Search for Referenced Master" (not sure if there is a way to post a URL to this) and I am not seeing what it is telling me to do. 1
I am going to Edit > Find and it is telling me to "Click the Filter HUD button beside the search field in the Browser". Is this referring to a browser in the Aperture UI or is this in the Filter HUD display? I am not finding this. 2
Also, it saying that in the Filter HUD I should "choose File Status from the Add Filter pop-up menu, and select the 'File Status' checkbox." and I am not seeing this either. Does anyone know where this is at? 3
Lastly, I see that there is a command called File > Locate Referenced Files and when I run this I get a "No Referenced Files in the /current/ selection. I have realized that I don't quite understand whether I am running this search for a specific Project and/or whether I have to make a specific selection {4} in the left hand pane {5} when I run a FILTER HUD or whether this automatically defaults to search the whole database. Does it matter what I have selected in the current Browser View when I run {6} either of these commands? 7
Thanks for any help in my getting this working better for me.
1. Just copy and paste the URL from the on-line User Manual. Very helpful. Are you on this page?
2. From the above-linked page:
Show the Filter HUD by doing one of the following:
Choose Edit > Find (or press Command-F).
Click the Filter HUD button beside the search field in the Browser.
The instructions specify ONE of the following. Your question indicates to me that you are trying to do both.
3. The User Manual has used the wrong term here. It should say "Choose 'File Status' from the 'Add RULE' pop-up menu."
4. The command -- like all commands? -- works on the currently selected Images. On the same page in the User Manual it says:
You can select a group of images in the Browser and Aperture can show a list of the referenced images within the selection, including information about where the masters are located. {Emphasis mine.}
5. The Aperture workspace is highly configurable. I don't know what you mean by "the left-hand pane". Of what?
6. Yes. Of course it matters. At some point in the 80's when the GUI became standard computers standardized on the "Noun→Verb" syntax: Select object(s), select command(s).
7. Not sure what the second command to which your refer is.

Can't use MAC Filter and have Blinking Red Link Light on WRE54G

I just added a WRE54G V3 extender to my WRT54G V8, I have download the most recent firmware on both products. My network in using WPA and after fixing all the typo associated with setting all that up I still could not establish wireless connectivity. I am/was using MAC Filters on the WRT54G and had added and triple checked the WRE54Gs Mac address,, but until I disabled the Mac Filter I could not connect to the network. I would like to get that issue resolved. Secondly even with the MAC Filter disabled the Link Light blinks red at a regular interval. It does appear that I have connectivity, but the light just blinks away. If this is normal I could not find any reference is the written materal. Thanks for any advice you might have.
Message Edited by ecanon on 04-16-2008 01:31 PM

Sorry to appear toltake so long to get back to this, but I did post a message in reply somewhere ????, but it doesnt appear here??? and then I got tied up on some personal stuff.
Anyway, I followed all the advice I could find on this thread (thanks to everyone who has posted to any question on this thread) and after starting completely over reseting everything and basically configuring the RE with everything else turned off and then powering up everything starting with the router, I got everything up and running using WAP and all.
The only issue left is when I enable MAC filtering on the router to allow only the MAC addresses in the list access to the network the RE goes belly up. Disable Mac filtering and it comes right back up. I have triple checked the Mac address I entered on the list. The only reference to the RE's MAC address is on the sticker on the back. I can't find that verified anywhere in the configuration screens on the RE.
If I could get his working I could count my security as good as it gets and go on about my business.
Thanks again to all for helping me get this far.

Using auth key to find existing session

I wanted to know if it is possible to pass an AuthenticationKey to the AdobeHSAuthenticator and have it find the existing session that I was logged into. Currently when I do this the the connect session logs me in again so now in the roster I would see chris turner 1 and chris turner 2. I wanted to know if its possible so that chris turner 1 is the only being displayed in the roster. The use case for this would be that I have two separate flex applications that I would like to login to the same room as the same person.
Thanks.
-chris

If you run two Flex applications (or two instances of the same application) at the same time and with the same user you will see two entries in the roster. They are for the same user (if you look at the debugging messages the user id will be the same for both of them) but we add a suffix to the name to identify the application instance.
Physically there are two network connection to the application, so you have to entries in the roster. What is the use case for wanting to see only one ?
If you really want to you can easily build your own roster (a list populated by the user manager collection of users) and filter out the "duplicates".

How to use one Filter Pane to multiple Dataproviders

Hi Experts.
i have checked the threads on this but i did not get correct solution.
we have issue in using single Filter pane web item in WAD for three different dataproviders ( three dataproviders have same free charecteristics and variable) charecteristics in row and keyfigures are different.
thanks in advance.
Regards
Raj.

Hi Gill,
Thanks for your Quick responce.
when we use the single filter pane, filter conditions are working for only first dataprovider (since data binding is to dataprovider 1. in affterted dataproviders i selected dataprovider 2 and 3, but filter pane is not active for other two dataproviders in tabs.
thanks in advance.
Any inputs please....
Regards,
Raj.
Edited by: Rajsapbi on Apr 6, 2009 9:22 AM

Problem with SSAS cube reporting action when using pivot filter with cubevalue function

Hi everyone,
I have a quite specific problem when I combine cube actions (Reporting Action SSRS) with Excel's cubevalue() function.
The problem is when I use a pivot filter as a parameter for the cubevalue() function. The action item does not show up in the context menue.
The cube action works fine when I do it from a "normal" pivot or if I use the cubevalue() function without the reference to a pivot filter (all the parameters in the function are "hard-coded").
I use SSAS 2012 and Excel 2010.
Thanks for yor help.
Gerhard

Hi everyone,
I actually figured out a way to solve this problem. I had to use a detour to solve this bug in Excel (at least I think it's a bug).
What I needed to do: I had to make Excel belive that the filter is actuall hard-coded and does not come from a pivot filter. This was only possible by adding a new calculated measure to the cube that gives back the MEMBER_Unique_Name to the current member
passed. This "value" can then be used to go back to the cube and select the cubemember function. Here is a small example.
This is the cube member:
CREATE MEMBER CURRENTCUBE.[Measures].[RegCompBranNameKey] AS
[Company Branch].[Reg - Comp - Bran Name].CurrentMember.Properties("MEMBER_UNIQUE_NAME", TYPED),
VISIBLE = 0 ;
And this is then done in a hidden Excel cell:
=CUBEMEMBER("Metrics";
IF(RIGHT(CUBEVALUE("Metrics";<PivotFilter>;"[Measures].[RegCompBranNameKey]");5)="[ALL]";"[ALL]";
RIGHT(CUBEVALUE("Metrics";<PivotFilter>;"[Measures].[RegCompBranNameKey]");LEN(CUBEVALUE("GlobalMetrics";<PivotFilter>;"[Measures].[RegCompBranNameKey]"))-57)
I had to use the UniqueName property because I have a combined filter. That's also the reason for this truncation and also useing the last part of it. If you just have a straight key you more easily use it.

I'm a beginner and would like to know which Photoshop to use (so many options). The only edits I care about being able to do are: whitening teeth, smoothing complexions/taking away blemishes. Does any photoshop have these options? I haven't been able to

I'm a beginner and would like to know which Photoshop to use (so many options). The only edits I care about being able to do are: whitening teeth, smoothing complexions/taking away blemishes. Does any photoshop have these options? I haven't been able to find the teeth whitening one anywhere. Also, I don't want it to lessen the high quality if my photos. Thank you so much!!

Hi Erika,
I came to Lightroom quite recently (in the last month!) from Photoshop Elements 11. I like the organization features in LR better, but for adjustments such as the ones that you mentioned I would leave LR and go back to Photoshop Elements 11, primarily because that is what I know. I don't use the subscription service, mainly because I already owned and installed the boxed version of Photoshop Elements 11 and adding it to a subscription service with Lightroom seemed redundant. I am sure someone in the community will (or has) comment(ed) that it is possible to whiten teeth and cure blemishes within LR, but I haven't figured out how to do that yet. Check out the TV Adobe free tutorials, particularly Julianne Kost's tutorials. She has a good presentation style and you might find the LR answer that you need with detailed instructions.

I have just transferred my iTunes library from a hard drive previously connected to a windows laptop to a MacBook Pro and now all my options for editing info are greyed out. I have seen the answers if still using windows but could find a similar situation

I have just transferred my iTunes library from a hard drive previously connected to a windows laptop to a MacBook Pro and now all my options for editing info are greyed out. I have seen the answers if still using windows but could find a similar situation to this one.

Eels290776 wrote:
if my external hard drive is not connected to either of my machines, and I download something onto my iMac and then something different onto my Macbook, where are my machines going to be storing the new downloaded media
when the drive is not connected, +iTunes media folder location+ will default back to <MacintoshHD>/users/<yourname>/music/iTunes/iTunes music (or media)
and when I next connect the external hard drive how will I easily get the newly downloaded media onto the external HD
you'd have to point +iTunes media folder location+ back to the external via preferences > advanced > iTunes media folder location, then file > library, organize library > consolidate files
and essentially, to have it easily readable on both machines?
in that case it might be best to copy the entire iTunes folder to the external. then, on each machine, launch iTunes while pressing option on your keyboard. when prompted, click on +choose library+ and navigate to the iTunes folder on the external.
note only one iTunes can access the iTunes library @ a time !
also, make sure the external is mounted on either machine before launching iTunes.
JGG

Use of filter to JSF faces servlet

Hi
I have a JSF application which is secured by a custom security framework (similar to SITE MINDER). The security framework after authentication passes the authenticated user name within a in-memory session cookie.
The entire user information like his group and access restrictions (field / UI compoonent level) resides in the application database
I have used a filter to JSF Faces servlet to retrieve the user information from the database and storing in session.
Is this use of filter a good approach?

I would fetch such information only once and store it in a simple session scoped bean after a successful login, but I am weird for wanting to do things in a simple way.
A filter can work to validate if the user is still "logged in" (IE. his/her session didn't expire), but since this is JSF you could also use a phase listener for such a purpose.

Using a filter to find Masters, only

Similar Messages

Maybe you are looking for