Using a first gen iPad. Video and audio from internet sites simply stopped working all of a sudden. Any suggestions? Thanks.

1)access the router web ui
2)go to the Mac Address Clone subtab , enable it and click "Clone" . Save the settings
3)do a power cycle
4)check whether the router gets an internet ip add now ..

Similar Messages

How can you use one NetStream to publish video and audio from another NetStream in AS3?

Let's say one of your client programs in AS3 is able to receive live video and audio from a NetStream and play it on the screen. How could you make it also take that video/audio stream that it's receiving, copy it over into another NetStream, and publish it elsewhere? I need to know how to do with this regardless of whether RTMP, RTMFP, or some mixture is involved. The reason why the stream needs to be relayed this way is a real long story, but it's necessary in this particular case. Thanks!

RTMP is TCP, which has higher overhead and latency because it guarantees packets are delivered (handshaking, causing latency and overhead). It also doesn't allow you to share connections directly between clients forcing the server to do all the work.
RTMFP uses UDP, which is a choice protocol for streaming video because it's the opposite. It's lossy which decreases latency and overhead from no retransmissions and most importantly (in some applications) allows you to connect directly from one Flash Player to another Flash Player (p2p) so the server overhead is dramatically reduced. The server is only required to negotiate the initial connection and then it's up to the clients to continue to facilitate that.
How you code your one to many or many to many relationship broadcast network will be based entirely on which of those you choose.
URLStream is very common to use in p2p. Here's an older Adobe article on p2p and an alternate quick old video tutorial (FP10) as a quick simple example of p2p over RTMFP you can view the source of.

HT4623 Using a first gen iPad with iOS 5.1.1; why does it say my software is up to date when I try to update?

Using a first gen iPad with iOS 5.1.1; why does it say my software is up to date when I try to update?

Because the device isn't capable of running iOS 6 and newer.
(95617)

Fastest way to transfer video and audio from MacBook to TV?

Hello All,
Thanks for visiting my page. I would like to transfer video and audio from my Macbook mid-2010 (specs below), and would like to do so with minimum lag. I m aware Apple TV has a feature which allows me to do that, however considering it is connected via either wi-fi or bluetooth (not sure which) I feel streaming an HD movie or playing an MMO will cause significant lag and/or a distorted picture.
So with that said, what is the best way to transfer video and audio with minimal lag?
Also, as a part II of the question, will the picture be distorted regardless if my TV is 60 inches?
Thanks for the feed back!
Macbook Specs:
Processor 2.4 GHz Intel Core 2 Duo
Memory 8 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 320M 256 MB
Software OS X 10.8.4 (12E55)

The easiest and most reliable option is to connect your Mac to the TV wired. Just buy a Mini DisplayPort to HDMI adapter and a HDMI cable to connect your MacBook to your TV. See > http://support.apple.com/kb/HT4241 Image and sound will appear on the TV automatically.
If the adapter and cable are OK, you won't get the picture distorted. Your Mac will try to use the maximum resolution the GPU allows in order to adapt the picture to your TV. It may not support the maximum resolution of the TV, but picture won't be distorted

What do I need to transfer video and audio from my 2009 Macbook to my television?

I want to watch a movie with my family tonight, but the DVD is broken. I was planning on renting the movie online and transferring the video and audio from my Macbook to the television. What cables will I need to accomplish this? Also, does anyone know, were I to use a Windows instead, would transferring the audio be simpler? (And what would I need to do that?)

Try doing it without a cable!
Use AirDrop, described here:
http://support.apple.com/kb/HT4783
UPDATE - Oh, sorry, I see the article points out the MacBook is too old for AirDrop.
Message was edited by: sberman

How can i stream video and audio from macbook air to my tv?

how can i stream video and audio from macbook air to my tv?

Wirelessly: you need an AirPlay - enabled device such as an AppleTV.
Wired: if your TV has an HDMI port, you need a Thunderbolt to HDMI adapter such as this one:
Mini DisplayPort to HDMI® Adapter w/ Audio Support
If your TV does not have an HDMI port you will need a converter that will convert HDMI input to whatever input your TV requires.

Hi I am having trouble with iMessage on the mac book pro, it doesnt sync with the ipad and iPhone, both the ipad and iPhone do but not on the mac book pro , has anyone any suggestions, thanks in advance

Hi I am having trouble with iMessage on the mac book pro, it doesnt sync with the ipad and iPhone, both the ipad and iPhone do but not on the mac book pro , has anyone any suggestions, thanks in advance

First, make sure that all your devices are using the same Apple ID in iMessages including your Mac. Second, your messages that you've already started on your devices will not show up on your Mac - only ones that you start from now on will show up. Third, if you're still not syncing accross all devices, make sure you read the directions on the first page of this thread. It should work after performing those steps. Good luck!

HT1725 How do I get my Netflix to work on my first generation IPad? The new app update made it stop working.

How do I get my Netflix to work on my first generation IPad? The new app update made it stop working.

See Kappy's great User Tips.
See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities
https://discussions.apple.com/docs/DOC-4551
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/HT5312
Send Apple an email request for help at: Apple - Support - iTunes Store - Contact Us http://www.apple.com/emea/support/itunes/contact.html
Call Apple Support in your country: Customer Service: Contacting Apple for support and service http://support.apple.com/kb/HE57
 Cheers, Tom

I have full membership to CC and have been using it for 4 months. Randomly Photoshop stopped opening jpgs, so I uninstalled and re-installed. Photoshop then stopped working all together. I signed out of the app manager and when I signed back in all my inf

I have full membership to CC and have been using it for 4 months. Randomly Photoshop stopped opening jpgs, so I uninstalled and re-installed. Photoshop then stopped working all together. I signed out of the app manager and when I signed back in all my info was gone and only "TRIAL VERSIONS" of CC apps were available. I paid for this software. I need to be able to download it again.

Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

2nd Gen Time Capsule - will not power up - just stopped working all of a sudden - I have tried other power outlets - I have tried pressing the reset button - no light

2nd Gen Time Capsule - will not power up - just stopped working all of a sudden - I have tried other power outlets - I have tried pressing the reset button - no light

The power supply is shot. But that it lasted even this long is the wonder.. not that it died.
The TC runs too hot..
Look on ebay for "Time Capsule power supply"
You can get a replacement and fix it although the economics are not so good.. it is probably time for a new TC.
If you can DIY it is really only a few dollars worth of capacitors that go bad.
See https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
For a bunch of alternatives.

My i phone 5 stopped working all of a sudden and now it is not even getting connected to i tunes and i am not even able to switch it on

my i phone 5 stopped working all of a sudden and now it is not even getting connected to i tunes and i am not even able to switch it on..please suggest what to do??

Hi PriankaB,
Thanks for using Apple Support Communities. This article has steps you can try if your iPhone won't turn on that may help:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
- Ari

Embedding video and audio for internet flipbook

Dear All,
first of all, sorry if it's been asked before but I could not find direct answer.
My company, small translation agency in Poland, plans on to buy InDesign to improve quality of our output documents, but we have one more feature in mind and we don't know if InDesign CS6 supports this.
In a movie http://tv.adobe.com/watch/cs55-design-standard-feature-tour/create-more-compelling-ebooks- with-indesign-cs55/ Terry White presents how to make an eBook with embedded video. We need a solution to create a similar effect, but the final document would be accessible from WWW (eg. http://essentialabsurdities.com/dance/ - there is no video in the example) - we want people to be able to browse content like in a book (flipbook?) and access video and audio (embedded or stored on a serwer along the document) when needed.
Does InDesign support this? What should be the final format of such a document? Interactive PDF? SWF? Everybody says Flash is going to be retired soon (Apple does not support it, Android devices are soon to follow, the same for PCs in the nearest future probably) so we do not want to use this.
Many thanks for your opinions on the issue.
Best wishes,
Michal Kornacki

I have no incoming video for my Jabber account. I was doing some testing for one of my customers who had this issue. Here is what I found. I have a EX90 registered to VCS on a corporate network. I have my Jabber Express client I downloaded and installed. When I call to or from either I don't receive video on Jabber Express but I get audio from the EX90. I get Audio and video on the EX90 from Jabber. What I found when I was troubleshooting is that if you leave the call up for 30 seconds I finally start recieving video on Jabber from the EX90. After testing a few calls this happened every time. I then checked the call settings on both sides during the call. Both endpoints are experiencing 50% or so packet loss until the video started being sent to Jabber and then the packet loss dropped to 0. So I would assume there is something wrong on the Jabber Express end that is causing a 30 second or so delay when the video is being sent through the proxy. Has anyone else had this exact issue?

Import video and audio from a dvd into FCP

Is there an easier way to import video and audio into Final Cut Pro - I am playing it on a DVD player and making a digital tape of it. Then logging and capturing it into FCP.

Hello and welcome to the forum!
Yes, there are a few ways that are faster. Have a look at this thread http://discussions.apple.com/click.jspa?searchID=-1&messageID=3465691
You could use software, such as "streamclip", or import by plugging your camera into your capture device and hooking your capture device into your computer and capturing by non-controllable device settings.
Good Luck

I am trying to edit a .mov video in Premiere Elements 12, but the video and audio do not sync. They work fine when played in Quicktime.

Hello,
I am trying to edit a .mov video in Premiere Elements 12, but the video and audio do not sync as soon as I load it into the program. It appears to work fine in Quicktime.
Thanks in advance.

mbgoodwi
Thanks for the reply. This is the plan.
Open Premiere Elements 12/12.1 to the Expert workspace.
In the Expert workspace, go to File Menu/New/Project and Change Settings.
In the Change Settings area, select the project preset
NTSC
AVCHD
AVCHD LITE 720p30
OK out of there. In the New Project dialog that appears, note that it has your new project preset named.
Be sure to put a check mark next to "Force Selected Project Setting on This Project". And, then OK out of there.
Back in the Premiere Elements 12 Expert workspace, use Add Media/Files and Folders to bring your video
into Project Assets. From Project Assets drag your video to the Timeline Video Track 1/Audio Track 1.
Is there an orange line over the content in the Timeline. See screenshot for orange line to which I am referring.
There should be no colored line over the content if the project preset matches the video properties. But, if you do see
that orange line, then render the Timeline content by pressing the Enter key of the computer main keyboard or press
the Render button above the Timeline.
Do your video/audio now play back in the Edit area monitor in sync?
Please let us know the result, and then we will decide what next.
Thanks.
ATR

My photos that I've saved onto my first gen iPad aren't syncing from reset

So I 'Reset All Settings' on my first gen iPad to alleviate the whole crashing to the home screen thing. And after I went through the process of setting everything up and choosing to backup from an iCloud backup made today, my photos aren't syncing. Neither is my music and my apps are staying on half percent complete. One went from syncing to saying it was waiting.
Is there anyway to remedy this? Anyone else had this problem?

Have the Identical issue with my iPhone4 - can't transfer from the library/ Purchased to the iPhone (device) tab hence all my purchase songs are yet to sync
PLEASE HELP ANYBODY!!!

Using a first gen iPad. Video and audio from internet sites simply stopped working all of a sudden. Any suggestions? Thanks.

Similar Messages

Maybe you are looking for