Using a Hitachi BD HDD camera with iLife HD 6
My friend just bought a Hitachi Wooo BD (Blu-ray) HDD camera. This does not use tape but a small recordable disk.
It does NOT have an IEEE port! She and her husband bought a mac and want to edit video in iMovie but they can't even connect this camera. These Cameras are becoming more common in Japan. Is there any way for her to connect her new video camera to her iMac and edit the video in iMovie? I know iMovie doesn't support USB, but it would be a huge bummer if they can't use this latest tech with the only computer that supports HD editing.
I found another post relating to the use of HDD (tape-less) cameras.
Answer:
Buy iLife 08
If the camera works, use it.
If the camera doesn't work, return it and get a new one.
Similar Messages
-
I've been using the mail app that came with my Mac for over a year. Out of the blue, it will not open and keeps giving me an error like "Mail cannot open because of an error and something about it not being compatible. Please help! I miss my mail
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
I'm using charger and cable that came with the phone. Nothing else changed.
I think it was the update the iOS 7.0.4 that I did last night. I woke up this morning with my battery almost drained and the charging function going off and on every few seconds, like it would start charging then disconnect, then reconnect repeatedly.
I've tried restarting the phone and hard restarting the phone several times, but I'm getting really low on battery by now (under 20%).
I've tried cleaning the connector with a little isopropyl alcohol, and blowing it out with compressed air. Though I can't be 100% certain, it's very unlikely my connector died exactly at the same time I was updating my phone. Especially since it appears I'm not the only one with this problem.
And now, after the last hard reset, my phone doesn't even recognize the charger at all, or being connected with the USB cable to my MacBook Pro.
I turned off my phone so when I go to the Apple Store it will power up one last time, but besides that I'm out of ideas.Just back from Genius Bar and two other people at my table had the same problem. Their 4Ss aren't charging either. One of them had a fried board according to the tech. At least my HW checked out OK. It just won't charge.
The tech tried to tell me that it was because my connector was corroded, which I told him was kind of a weak argument since evidence points to that the update has something to do with it.
They're seeing a lot of these and it looks like they already have a script.
Luckily I had enough juice left to recycle it for like $180, so I picked up a 5S with a new 2 year.
It looked to me like this is going to blow up pretty big. Like class action lawsuit big.
If you have an iPhone 4 or 4S, and you haven't updated it to iOS 7, don't for now. See if a patch comes out that doesn't brick your phone. Or get an induction charger maybe? Don't just update and expect absolutely no problems because too many people are having problems right now. -
Can I use the USB cable that came with my digital camera to conect camera to iPad by connecying the camera cable to the USB end of the iPad cable? I have a double ended USB connector if necessary.
No.
You need to use this.
http://store.apple.com/us/product/MD821ZM/A/lightning-to-usb-camera-adapter?fnod e=3a
or this
http://store.apple.com/us/product/MD822ZM/A/lightning-to-sd-card-camera-reader?f node=3a -
Do i need to use the phone line that came with the printer to fax paperwork or can I buy a new one?
This question was solved.
View Solution.Hi Willcarter,
It is all up to you. You can use the phone line which came with the printer or you can get a new one. It does need to be a 2-wire phone line though.
Thanks
Josh.C
Click on the BLUE KUDOS button on the left to say "Thanks"
Although I am an HP employee, I am speaking for myself and not for HP. -
i use a macbook pro which came with facetime i have an iphone 4S as well. whenever i use the wireless on my iphone i can facetime with ease however when i use the same wireless for my mac to facetime the call always gets disconnected.
To use factime on your Mac, I believe you will need to use your email address to do so instead of your wireless number. Since you can't make calls on the Mac.
-
MacBook Pro came with iLife 09 pre-installed. Is it on the App Disc?
My Macbook Pro came with iLife 09 installed. I did not get a separate iLife disc. I have two discs, the Mac OS X DVD and Applications Disc (haven't confirmed if iLife is in there). Do you know off Apple includes iLife in that second disc or will I be screwed out of iLife if I decide to erase and install the Mac OS X down the road?
Welcome to the Mac world!! The answers to any questions you have are right here!
Time machine will handle everything for you. You don't have to make any decisions. It will start with a full backup and then take incremental backups from there. You can hook up an external to the extreme base station but if you have 1 machine to backup I would suggest plugging it into that machine. Network backups can be so slow, especially that first full backup. -
Tried to perform the Apple Hardware Test by holding down the D key on restart - goes straight to my desktop. Was told to try using te original cds that came with the computer - can't find them. Can I buy new ones or what do I do?
Have the Mini's Serial# handy & call Apple Care, they usually have original replacement Discs available.
-
How can I use the built-in Isight camera with an external camera (usb/firewire) at the same time?
How can I use the built-in Isight camera and an external video camera at the same time?
I'm wanting to stream over Oovoo/Skype/etc. using 2 cameras.
ThanksSimple question with a not so simple answer.
(a) If you mean that you want to run multiple apps simultaneously using a different camera with each app, you may encounter computing power limitations. Digital video is processor intensive. The only way to know if your Mac can do this it to try it. If the video does not work together but each app works when it it the only app running, you are likely overloading your Mac's ability to process and/or move all the required data in your data bus. You can get a better indication of whether this is the case by watching your Activity Monitor utility while running the apps you want to use.
(b) If you mean that you want to have more than one compatible camera connected to your Mac simultaneously for ease of changing between video sources, some, but not necessarily all, apps you are using to operate your camera(s) allow you to select between your cameras.
How you select among connected cameras depends on which application you are using. Here is how camera selection works in a few examples:
(1) For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
If you cannot see the "Camera" choices bar, your Mac is recognizing only one (or none) of your cameras. In that case, consider the suggestions fromhttp://support.apple.com/kb/HT2090 for iSight problems or refer to your other camera's documentation for help.
This particular choices bar solution applies ONLY to iChat. Most other applications also have settings that allow you to choose which camera to use. However, they do not all work the same way.
(2) For instance, iMovie HD's camera choice is NOT set via Preferences. When you have more than one compatible camera connected, iMovie6 HD uses a drop-down menu choice something like this (depending on which version of iMovie you use):
Note: Because I had no built-in iSight connected when I made this example, and because my external iSight was not connected, the drop-down menu showed only "Time Lapse." Because your Mac has a built-in iSight, your built-in iSight would show in the drop-down menu even when no other camera is connected. Connecting an additional Mac compatible webcam should allow you to choose either camera.
Other iMovie versions work slightly differently.
iMovie 9 (from iLife '11) uses a different camera choice button shown in this article:
http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov39f84285.html
iMovie 8 (from iLife '09) is slightly different as explained in this article:
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10172.html
In general, you can use your Mac's help for the application in use to find out how to select among more than one connected camera.
(3) Photo Booth in Snow Leopard 10.6.x and later uses the Photo Booth > Camera menu command to select which camera to use.
Note for readers with older Mac OS X: The previous version of Photo Booth that came with Tiger (10.4.x) is such a simple, basic app that it offers no menu selectable choice. Unless your built-in iSight is already occupied as the camera being used by some open application before you launch Photo Booth, Photo Booth will use ONLY your built-in iSight.
However, you can use the trick from ¶ 4 of http://docs.info.apple.com/article.html?artnum=302781 to let Photo Booth use an external camera.
(If you have an external Firewire camera connected, it may be used in preference to any USB webcam. If that is a problem for you, merely disconnect the problem Firewire device.)
(4) For FaceTime, launch the app and click the Video menu item.
If your Mac recognizes more than one connected compatible camera, a "Camera" section listing the cameras from which you can choose will appear there. Clicking on the desired camera name will let you select the one you want as shown in this image from my Mac Pro and LED Cinema Display:
If your Mac recognizes only one compatible camera, the "Camera" section will not appear in the Video menu, but FaceTime will automatically use the connected camera that is recognized by OS X.
(5) I do not use Skype oir Oovoo. For those or other apps, see Help for each app for info on how to select your desired camera.
Message was edited by: EZ Jim -
For the first time, I'm trying to use adobe premiere elements 10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or the codex is not installed. As a test, I created another very small project and get the same error message, when I try to open it. Pls give me a simple answer, a refund or a phone
mike frischenmeyer
What computer operating system is your Premiere Elements 10 running on? And, what video card/graphics card does that computer use?
Is this the first time you are using Premiere Elements 10 or have you worked with it before successfully? There is no easy solution until we
know the details and troubleshoot to determined what caused the problem.
1. Can you open a new project?
2. After you saved/closed the problem project, did you move, delete, or rename any of the files/folder that were related to the source media
for that project?
3. Please review the Adobe document on troubleshooting damaged projects.
Troubleshoot damaged projects | Adobe Premiere Elements
4. What are the steps that you are using to reopen this saved closed project.
a. File Menu/Open Project/Name of Project
b. Other
Please review and consider and then we can decide what next based on your further details and results..
Thank you.
ATR -
I just replaced my hard drive due to failure in my Mac mini. I am trying to load the Snow Leppard OS from the DVD's that came with the unit. Is there a step-by-step procedure somewhere that would help me? This is my first problem with my first Mac. I thought getting to the hard drive and changing it would be the hard part but I made it through that with little trouble. My lack of software experience on the Mac is really slowing me down. I believe I'm not making the right choices in the Disk Utility program.Any help would be greatly appreciated. Thank you.
Prep the new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Upon completion quit DU and return to the installer. Install OS X. When the installation has completed you can proceed to restore your data from your backups. If you have an existing backup from Time Machine or another hard drive then upon completing the Setup Assistant you will have an option to restore from another Mac, a TM backup, or another drive. Use the appropriate option. -
How come I keep getting a message saying that the accessory may not support the device? I've been using the same charger that came in the box with the phone. Now it doesn't charge at all.
Then take the cable, the plug and your iPhone to an Apple Store genius bar it is still under the 12 month warranty
-
Using two scan progressive cameras with 1409?
I need to use two scan progressive cameras with the 1409. The two cameras are two sony XC-55 (30Hz). I have configured one as a Master and the other as Slave. I have connected the HD and VD of each camera between them.
I acquire a sequence of frames (normally I take five)of each camera every time that a triggeg ocurrs. Time to time I get some frames in the slave camera that the first line of the frame is not at the top. Not always in the same position. Sometimes I don't received the last or the two last frames.
In the past I used the same configuration with the 1408 and 1408 always tooks correctly all the frames from the two cameras.
Please, help me?
Thanks, in advanceI think the board isn't reading correctly the frames. I have some systems installed with the 1408 and they work correctly. I will send you some frames which show the problem and the vi that I use to capture them. The .icd file that I use with the 1409 is 30 Hz progressive and the .icd file that I use with the 1408 is scan area.
It is possible that I can solve the problem changing the parameters of the icd file? Do you have information about them?
Attachments:
frames.zip 167 KB
vi.zip 25 KB -
HT1665 can use use a wall charger that came with an I touch to charge an I phone 4S?
Can you use the wall charger from an Ipod Touch to charge a I phone 4S?
I didn't know they came with wall chargers...yes, that will be just fine.
-
I have mac pro 2007 model given to me, I updated it to lion about six months ago, and I do not have a time machine.
Lion stopped loading before I get to the login screen,
I tried all the tips, doing a option/shift/v. I noticed several fsk_dsk errors that it could not fix on my boot drive.
Restore would not work either. The only physical copy I have is the install disk that came with the mac. I think it is Tiger.
If I put this operating system on will I be abel to upgrade it to lion, and if so will I have to pay again?The Lion Recovery Partition has its own index. Your Macintosh HD partition is the one with the troubles.
If Disk Utility cannot fix it, you may need to apply different Utilities, such as Disk Warrior.
Some readers suggest that the best disk repair is to erase the drive and restore it from your Backups.
This might be a good time to consider getting a new drive to have on hand. This would allow you flexibility in copying, fixing, and (if needed) replacing the drive with the problems.
Maybe you are looking for
-
I have an iPad 2 and receive e-mail through regular internet connection. Lately, when I delete e-mails, and clear my Trash folder, they re-appear, downloaded anew from the server and marked as unread. My e-mail Advanced Settings are selected for "Rem
-
Windows Firewall has a port open but when I do a port scan the port is closed
Hello, I have a new door entry device that is being installed that has a internal IP address of say 192.168.200.12 that requires port 3001 to be open. The device is reachable via ping and is plugged into a HP Procurve 2910al switch that is connected
-
Checkbox in a datagrid column header not working properly
Hi, I have rendered a checkbox in the header of a datagrid column using headerRenderer property. That column also has all entries as checkboxes. What I want to do is that on checking the header checkbox, all checkboxes should get checked. Though I am
-
Is sth. like "JCO.Repository.getFunctionTemplate(String BAPI_NAME)" in NCo?
Hi guys, I switched from JCo to NCo and try to find the same functions that are available under JCO. My specific problem is this: I integrated SAP in our applications using XML with JCo until now, e.g. JCO.Function.getImportParameterList.fromXML(Stri
-
Downloaded adobe premiere pro cs6 on computer but can't find program
So today I've downloaded Premiere Pro CS6 3 times on my computer. All 3 times I can't find the program on the computer. My Creative Cloud is showing that it's installed, and if I check the "Uninstall" Folder, it's showing that's it's there too. I've