Using a landline number as displayed caller id

Is it possible to use a landline number as displayed caller id, instead of a mobile number?

Hi, cb10, and welcome to the Community,
Unfortunately, no. Skype does not have a means to verify a land line number.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Similar Messages

In Siri, I can call by my voice, but why I can not use Siri voice call in my country (Laos), just can call only us phone number; my country we use like 3 number for option call, 8 numbers for call friend but Siri cannot use this please help us, thanks

In Siri, I can call by my voice, but why I can not use Siri voice call in my country (Laos), just can call only us phone number; my country we use like 3 number for option call, 8 numbers for call friend but Siri cannot use this please help us, thanks
And please help me can type Laos font in it like andrio phone.

Hi Cozumel,
Thanks for posting. I'm sorry you're having problems with your bills. I can take a look at this for you. Drop me an email with your account details and a link to this thread for reference. You'll find the address in my profile.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Can I use old landline number

Maybe some can help me.
I live with my parents in Waterford, Ireland. The local area code is 051, and I have a choice of new numbers that can receive calls. Is it possible to use our old landline number, as people may need to contact us. We are anxious to get rid of our landline, as the line rental has become too expensive.

Hi, Ege4That, and welcome to the Community,
Unfortunately, not. Skype does not "port in" other carriers' numbers.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Illegal use of my skype number to make calls

Can anyone use your Skype number to make calls? I had a return call today from someone I do not know and they were returning a call they said I made earlier today and this person had my Skype number correctly. How can someone, or anyone for that matter, use my Skype number to make calls? Is there a way to stop that? Anyone with an answer, please respond.

DS wrote:
Andy_N wrote:
DS wrote:
pottyperson wrote:
I doubt that other contributors will be able to offer a solution
Well, as I mentioned before, if it's a HH2 and the rear of it is in view of the public, then every Thomas, Richard and Harry will be able to see the wireless key and make full use of the Internet.
Hi.
Although possible, that's not entirely true. If the user has altered the wireless key, then viewing the back of the hub will not help
But how many out there in BT land actually do change it?
BT only prompt the user to change the default admin password if and when they first access the hub.
At least BT thought about the label design on the HH3, keeping it hidden until needed.
I reckon hardly anyone would change the wireless key to be honest , but I wonder how many leave them in a window ...
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

I have my landline diverting to my iPhone. However, it does not distinguish whether the call has come from my diverted landline number. My old Nokia many years ago used to show an arrow symbol when it was a call thats source was diverted. I really need to

I have my landline diverting to my iPhone. However, it does not distinguish whether the call has come from my diverted landline number. My old Nokia many years ago used to show an arrow symbol when it was a call thats source was diverted. I really need to know when a call has come from my landline so I can greet the caller in the appropriate way and also so I can be sufficiently short as I am getting charged for the call from my BT landline to my mobile.

That is not a feature that's available on the iPhone. Sorry.

Caller ID using my Office Landline number

Hello,
is there possible to set My Caller ID with my office landline number? and how much the price cost?
and then can you help me set up my landline number as caller ID?
I want to add my office landline number as Our office Caller ID
Please inform me again
Best regards
Rama

Hey brother, I got an email back from customer service.
"We understand that you wish to add your Google Voice number as your caller ID for your Skype account. We are here to clarify this concern.
It is not possible to set up your Google Voice number as your caller ID in Skype. We recommend that you use Skype Number or a mobile number as your caller ID."

My number not displaying on people im calling call...

Ive been having this problem for a while. I live in NJ in the USA. And my number is [removed for privacy].
When I call people from that number, it always comes up as an 888 number in CA.
How can I fix that so it displays my home number on peoples phones?

Axidworks wrote:
Ive been having this problem for a while. I live in NJ in the USA. And my number is [removed for privacy].
When I call people from that number, it always comes up as an 888 number in CA.
How can I fix that so it displays my home number on peoples phones?
Log into your Skype account here on the web site, using the "Account" link at the top of this page. Once you log in, you will see Caller ID settings, along with a link to change those settings. If you have a Skype Online Number in the US, you will be able to select that for your Caller ID number. If you don't have an Online Number, you can go through a two-step verification process to use a mobile number as Caller ID when calling from Skype. This requires SMS messages to be sent to your mobile phone number, and will use a small amount of Skype Credit. Unless your home (landline) phone is able to receive SMS messages, you are not able to use that as Caller ID when calling from Skype.
More about Caller ID with Skype is available at the "Caller ID" link at the bottom of this web page.
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Use External phone Number mask * Calling party Transform Mask @ Route patt

Having an issue with CLID at RP level. Lets say I have two phones. One phone is configured with an External phone number mask of 1112223333 and the other one does not have an external number mask set. When a call is placed to the PSTN, Phone one needs to display its external phone number mask. Phone two since nothing has been added under external phone mask needs to be 1112224444.
I configured the RP to "Use External Phone Number mask" and set the Calling Party Transform mask to 1112224444. I figured that if an external phone number mask was specified under the DN that it will route it to the PSTN and if nothing specified under the DN it will default to 1112224444 according to the setting in the RP.
When I configured this, no matter what I do the calling party transform mask takes priority and the external phone number mask is never used. Is there a way around this? I tried it at the RL level and it does the same thing.
Does anyone have any other ideas other than adding an external phone number mask for every phone.

Thats what I thought. Why can't they add that as a feature in the next release of CM? It seems like it could be simple to do. Check for External Phone number mask, if nothing is specified, then check for calling party transform mask. If true set Calling Party transform Mask as CLID and route to RL or something like that..
thanks

Don't display caller number

I configure AutoAttendant through call router and call handler in unity ,but the caller number can't display and it prompts "From Voicemail" on phone before the call is picked up.And after picking up it,the caller number is display normally . Why ?

Hi,
Assuming that you've set up the call transfer to be 'supervised transfer' this is the behavior you're going to see. When Unity puts the original caller on hold in order to call your phone, the two call legs aren't bridged together, so the call appears to CallManager to be a simple call from Unity. When you pick up the call, then Unity bridges the two legs together, and CallManager changes the caller ID to reflect the change. If you reconfigure Unity to use 'release to switch' then you will see half a second of the call being from Unity, but when it bridges the two legs together (while your phone is still ringing), CallManager will immediately change the readout.
When you choose 'release to switch', Unity will put the caller on hold, dial the user's number, and connect the two. So, the caller should hear a very brief moment of music on hold, then hear the ringback from the phone, etc. To get it so that there's MoH until the recipient answers, you'd have to go back to 'supervised transfer', which would break your Caller ID.
HTH
//G

Displaying called number on destination phone

Hello,
We are using UCM + CCX 7. We are looking for a way to have the called number (or the digits passed for the called number) displayed on the recipient's IP phone -- for select extensions/agents -- versus showing the caller ID of the originator. For an individual phone, I've tried checking "Dialed Number" under Forwarded Call Information Display, but it still shows the caller ID instead. Does anyone know of a way to accomplish this, either through UCM or CCX?
Thanks

then you can have a look under call routing at Transformation Patterns => Called Transformation Pattern, create a CSS and PT for that apply it to the DevicePool of the Jabber phones.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/9_0_1/ccmcfg/CUCM_BK_CDF59AFB_00_admin-guide_chapter_0110000.html
http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/7_0_1/ccmcfg/b03cldpt.pdf

Cannot call Japan landline number

For years I was able to call a certain landline number in Japan, but since about 2-3 weeks it tries to connect, no dial tone and stops.
I tried other Japanese landline numbers and they connect just fine.
If I use my normal landline I can call without problems, normal dial tone and the person picks up.
But normal landline is very expensive
Any ideas ?
Thanks.

Hi,
It seems you have already contacted Customer Service and resolved the issue.
Unfortunately United Kingdom Shared Cost numbers are not included in our subscriptions.
For more info visit: https://support.skype.com/en/faq/FA322/
If my answer helped to fix your issue, mark it as a Solution to help others.
Thank You!
Please send private messages only upon request.

How we can limit the number of concurrent calls to a WCF service without use the Singleton pattern or without do the change in BizTalk Configuration file?

How can we send only one message to a WCF service at a time? How we can limit the number of concurrent calls to a WCF service without use the Singleton pattern or without do the change in BizTalk Configuration file? Can we do it by Host throttling?

Hi Pawan,
You need to use WCF-Custom adapter and add the ServiceThrottlingBehavior service behavior to a WCF-Custom Locations.
ServiceThrottlingBehavior.MaxConcurrentCalls - Gets or sets a value that specifies the maximum number of messages actively processing across a ServiceHost. The MaxConcurrentCalls property specifies the maximum number of messages actively
processing across a ServiceHost object. Each channel can have one pending message that does not count against the value of MaxConcurrentCalls until WCF begins to process it.
Follow MSDN-
http://msdn.microsoft.com/en-us/library/ee377035%28BTS.10%29.aspx
http://msdn.microsoft.com/en-us/library/system.servicemodel.description.servicethrottlingbehavior.maxconcurrentcalls.aspx
I hope this helps.
Rachit
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

I bought my iPhone 4s in the Uk and then brought to Cyprus where I live. I used Siri to call my husband 2 days ago without problem but now when I try to use Siri it won't call any local Cypriot number but will call my Uk contacts. Help please

I bought my iPhone 4s in the Uk and then brought to Cyprus where I live. I used Siri to call my husband 2 days ago without problem but now when I try to use Siri it won't call any local Cypriot number but will call my Uk contacts. I can call the same numbers manually so it's not my network. Any help would be appreciated.

This sounds like an international issue? Although I can not see why? I brought my phone in Australia and operating it in Indonesia, I have the same issues.... Otherwise Siri works fine, even texting (SMS) to local numbers siri works well, but dialing local number it just wont work...! I will try using my Australian SIM card and see if that is the reason.. I tried changing the number in the contacts and took out the international prefix, I turned the international assist on and off still nothing.. How frustrating. I called apple, the technican had know idea and we to his supervisor, had to wait fro 40 miuntes and then I hung up..
PLEASE HELP..!

Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number: *********

Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number: *******
<Edited by Host>

Hello Khayalh,
You should be able to link your phone number by following the steps in the article below. From your iPhone, sign out of FaceTime and iMessage and then sign back in and it should link. Check in the Start Conversation With and I Can Be Reached at section in iMessage and FaceTime respectively.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Regards,
-Norm G.

How can I tell which display hardware is installed on my powerbook G4 using the serial number?

I have an old Powerbook G4 with no OS on it, and would like to install Linux. Using the serial number, how can I find which display hardware is installed?

Do you mean how to find the manufacture of the LCD display itself, or the video hardware config on the logic board?
Finding the code for the vendor who made the display requires an OS because it is accessed through the Terminal app.
If your serial number starts with "W8" and you are having lines show up, that is a known problem associated with the plant in Shanghai China. It also affected a large number of G5 iMacs. Only a new display will fix it and that probably costs more that any used G4 Powerbook is worth on the used market.

Using a landline number as displayed caller id

Similar Messages

Maybe you are looking for