Using a laptop for image acquisition in combination with PCI-1428/PCI-8252

I am not too confident about PCMCIA framegrabbers so that I would like to use either a cameralink camera with the PCI-1428 or a Firewire one with PCI-8252.
Are there any obstacles accommodating the PCI cards in an PCI Expansion box?

You could do it, but why? Just get a firewire card for the laptop and go direct. You can get them with external power supplies to power the camera. It will work just the same and you won't have to lug around a big box with all your other equipment.
Bruce
Bruce Ammons
Ammons Engineering

Similar Messages

I am using PCI-6033E IO card and i would like to send 5 volts (high logic ) to the trigger box. the trigger box will trigger the frame grabber card, that i am using for image acquisition.

i am using PCI-6033E IO card and i would like to send 5 volts (high logic ) to the trigger box. the trigger box will trigger the frame grabber card, that i am using for image acquisition.

Hello;
The first thing you need to figure out is the shape of the trigger pulse needed.
In case you just need a logic high TTL pulse, you can use one of the digital lines of your DAQ device.
In case you need a pulse train (multiple trigger pulses), you will need to configure one of the general purpose counters to accomplish that task.
You can find examples in both Labview and NI-DAQ showing how to program your DAQ board to accomplish both approaches.
Hope this helps.
Filipe A.
Applications Engineer
National Instruments

I've got movies on my computer on itunes, however my parents wish that i use my laptop for itunes stuff, and i cant figure out how to get those movies to be able to sync with my ipod again, it wont recognize that I have them. Suggestions?

I've got movies on my computer on itunes, however my parents wish that i use my laptop for itunes stuff, and i cant figure out how to get those movies to be able to sync with my ipod again, it wont recognize that I have them. Suggestions?

While you're in itunes, with the leftside window open, click on Apps. Then, look across the top middle of your itunes screen. You will see several choices: All, Iphone/iPad Touch, Ipad, Ipod Games, List, and Updates.
Clicking on each of these gives you a different view.
When you select ALL you will see all of your apps. When you select Updates you sill see only the apps that need to be updated. When you are in Updates you will see the Update button in the lower right corner.
Hope this helps.

I have just use my laptop for only three months and my hard disk cable have break and i need a replacement

i have just use my laptop for only three months and my hard disk cable have break and i need a replacement

Talk to AppleCare about getting a replacement.
Allan

I'm a normal user, using cad programme, not using my laptop for games, my question is: do I need to get 16 gb ram in my retina macbook pro or 8 gb ram is pretty enough?

I'm a normal user, using cad programme, not using my laptop for games, my question is: do I need to get 16 gb ram in my retina macbook pro or 8 gb ram is pretty enough?
Thanks for support.

8 GB may be sufficient for CAD but 16 would be a much better idea.
All the Macs I have ever owned were eventually upgraded to the maximum amount of memory they could use. Considering that as of now, the RAM you specify is all the RAM you will ever have, get as much as you can. That is the only way to maximize its economic life.
If Apple offered a 32 GB version I'd get it.

How many songs can we put on a playlist? We will be using our laptop for a party and want to set up a playlist.

How many songs can we put on a playlist?? We will be using our laptop for a party and don't want to be searching for songs.

I don't think there is a limit. I just tried a playlist with 3000 songs and had no problem. You can certainly can make one big enough for a nice long party.

I am using IMAQ vision for Measurement Studio, Ver6.0 with Measurement Studio Base Package,Ver6.0(Professional Edition).Can I work in IMAQ Vision for Measurement studio, Ver6.0 If I upgrade Measurement studio to Enterprise Edition,ver8.0.1

I am using IMAQ vision for Measurement Studio, Ver6.0 with Measurement Studio Base Package,Ver6.0(Professional Edition).Can I work in IMAQ Vision for Measurement studio, Ver6.0 If I upgrade Measurement studio to Enterprise Edition,ver8.0.1
Thanks
Biswajit

Howdy Biswajit,
The IMAQ and Vision ActiveX controls you are using with Visual Basic 6 do not install with Measurement Studio. They are installed when you install the IMAQ software and include support for Visual Studio 6. Upgrading to Measurement Studio 8.0.1 will have no effect on your IMAQ controls since they are not related to one another. Purchasing Measurement Studio Professional or Enterprise packages allows you Visual Studio 6 support for other ActiveX components. Refer to this link for a list of ActiveX components included in those packages.
If you are asking about using the ActiveX controls in .NET, then take a look at this KnowledgeBase entitled Do NI-IMAQ and NI Vision Support Microsoft Visual Studio .NET?
Hope this clarifies things!
Best Regards,
Jonathan N.
National Instruments

Problem in using different format for Image files

We are generating a report wherein the logo (Image File) is changed with respect to the company's location.
Here, we are making use of a Text field using a formula column as its source for getting the file path.
When the Size is kept as "Expand" or "Variable", then, when the image size changes considerably, it gives problem, wherein the logo is not displayed.
Then we increased the size of the logo field and kept thte size type as Fixed. But the probnlem which we face is because of the .bmp format which the report accepts.
This is because, when the format type is bmp, upon increasing the resolution or size of the bmp increases the size by several folds( say from 70kb to almost 1000 or 1500kb) which leads to the error "Memory cannot be read" and leads to abrupt application termination.
Is their any way by which i can make use of GIF format for the image file and at the same time change the file name at runtime.
Eagarly waiting for an early solution.
Thanking you in Advance,
Ramnath Balasubramanian

Hi,
You can only use one Apple ID with iTunes match. Purchasing another match subscription using wife's Apple ID is not a solution. I can only suggest that you use your ID for match and all iTunes music purchases.
Jim

Express vi for image acquisition is missing

I am using labVIEW 2014. I am doing a project which is based on image acquisition and recognition. I installed both VDM and VAS tool kits. But i am still unable to locate the image acquisition express vi. Please help me with the same. I have also attached a screen shot of the same

yes, i have installed the imaqdx drivers. still i am having the same problem

I tried to sync some new songs bought from iTunes into my ipod using my laptop, (for the first time). It would not add the new songs to the ipod. I tried several times, with same result. I never had this problem using my desk top computer.

I also am having a problem with the songs I purchased using the laptop not showing on the desk top itunes, even though it is authorized to do so. The new songs did show up on the iPad iTunes, however. Have no idea why. I thought this happened automatically.

Welcome to the Apple Community.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option which is revealed in the iTunes app on your iOS device by tapping the more button at the bottom of the screen.

My iphone is linked with my pc and i want to use my laptop for the icloud

My iphone is linked with my pc but i want to use my laptop and connet via icloud HOW????

is your pc you mentioned the same as your laptop?
here's a link
http://www.apple.com/icloud/setup/pc.html

Using accelerator keys for loading a appliaction made with J2ME

Hi
Is there any methods to use accelerator keys to load a application made with J2ME for mobile telephones. The application is not running and i must find a way to load the application using keys codes.
How can i accomplish this? can i use the application manager and the jad file? i know that i can use PushRegistry for incomming connections to load the application automaticaly. But i need a way to accomplish this by using the key events on a mobile phone when the application is closed.
Best Regard
jan Fredrik Fallsen

Hi
Is there any methods to use accelerator keys to load a application made with J2ME for mobile telephones. The application is not running and i must find a way to load the application using keys codes.
How can i accomplish this? can i use the application manager and the jad file? i know that i can use PushRegistry for incomming connections to load the application automaticaly. But i need a way to accomplish this by using the key events on a mobile phone when the application is closed.
Best Regard
jan Fredrik Fallsen

Want to use new laptop for iPhone 5, but will iPhone 4 backup on old pc transfer ok?

I'm about to set up my new iPhone 5, but I want to set it up on a new pc, not the one I previously used for my iPhone 4. I've done a backup of my iPhone 4 with the old pc, but want to plug the new one into my new laptop. Will everything still transfer? Is there anything else I need to do/think about before registering it?

You can restore the iPhone from backup on the older computer, then transfer content to the new computer.
You can also just move the backup to the new computer and move the iTunes library to the new computer. Then you're new computer will have all the info that was on the older computer.

Use same player for images and video

Greetings,
I am working on a media player using Flash Pro CS4. I am
totally new to Flash, but I do have experience coding in C#. I have
included a URL to a media player used by the UFC. I'm trying to
figure out how they have a single media player that allows you to
display either an image or have the next selection in line be a
video that plays. I did find a tutorial on in the Flash Developers
Center on how to create a dynamic video player with an XML
back-end, which is very helpful, but it only covers using video. If
anyone could help me out by pointing me in the right direction, I
would greatly appreciate it.
Thanks,
PAffiliates
PS...Below is the URL I mentioned...
http://www.ufc.com/includes/flash/FeaturedMediaGallery.swf?4

So fair warning, what you're asking for isn't really a supported deployment method of CRM.
That said, you should be able to do some DNS trickery internal to your network that points your "crm.domain.com" to "crm.domain.local" and then hopefully CRM will treat the connection as if it came from an internal network.
Otherwise, you're likely going to have to accept that everyone gets the ADFS login page internal and external to your network.
The postings on this site are solely my own and do not represent or constitute Hitachi Solutions' positions, views, strategies or opinions.

How to use MatrixLayout control for Images in UI5

I am trying to use MatrixLayout for my images but not able to do that....
I have Grid Layout in that i have added four images and that should be display like
image_1 image_2
image_3 image_4
I used Horizontal Layout but think it is not best approach.
Please help me if anyone know this....
Message was edited by: Michael Appleby

Hi Prashant,
You can use matrix layout with number of columns pre-defined and create rows according to your images.
var oLayout = new sap.ui.commons.layout.MatrixLayout({
layoutFixed : true,
columns: 2,
Create row from you content like:
oLayout.createRow(image1,image2);
oLayout.createRow(image3,image4);

Using a laptop for image acquisition in combination with PCI-1428/PCI-8252

Similar Messages

Maybe you are looking for