Using a mixer board.........

What is the need for a mixer board, like the ones you see in big studios, if they all use high end programs like Logic and Pro tools? I've been to studios that didn't a DAW and instead used ADAT where a mixerboard contraols everything. But why is one needed if a studio is based of Pro Tools. Is there a way to control all the volume sliders and eq's of each track on your computer using a mixer board? In other words, is it possible to adjust the volume of a track on logic, by moving a volume slider on a mixer board, so as if the mixer board and the program are linked together?

There are a couple of advantages:
1. When mixing, you have all channels in front of you. Faders and knobs you can adjust at will without looking at a computer screen.
2. High-end consoles like NEVE, SSL, etc... have great pre-amps/compressors and EQs, so the sound is really warm, a whole different experience to the only software world.
3. Another great advantage is being able to set your automation to latch, and start tweaking the mix at will, without limitations (like depending on a mouse channel by channel).
P.S. There are a lot of reasons, but to me these are the most notable.

Similar Messages

  • Using a mixing board as a pre amp?

    Hey all,
    I have a decent little M-Audio audio interface but I'd like to record more than 2 real instrument tracks simultaneously for a recording session. I believe I can record up to 8 real instrument tracks at any given time with GB3 and was wondering if I am able to use a mixing board as a pre amp much like my audio interface? If so, how do I connect it up?
    Here's the link to our board:
    http://www.behringer.com/UB2222FX/index.cfm?lang=ENG
    Thanks!
    Jay.

    For 8 channels you'd need a FireWire interface or mixing console that offers at least 8 channels out.
    An example, the interface I use, the Presonus FirePod FireWire Audio Interface
    8 Mic PREs and 10 channels out (GB can use 8 of those)

  • Attached mixing board with audigy sound card probl

    i am using a mixing board with an audigy sound card the porgram im using has 2 channels a and b the music plays only on one port i used to be able to sue up the 2 different songs on 2 volume controls now both songs play in the 2 channels but sound is only controlled by one volume control?it has played properly for over 3 years with no problems until tonight?anyone have any ideas?thanks

    Okay, I'm assuming you mean you have a stereo connection to rear Line-out and 2 and that you want both Line-outs to play the same stereo signal. If you are trying for something different, then post additional explanation, and we can go from there. I have not heard of an SB9400 before. You should be able to find the serial number on a white sticker on the card. That would identify the model. I think all Audigies have a Speaker Settings applet. So in Speaker Settings, do you have 4/4. speakers selected? If you have an EAX Console, do you have a CMSS3D option? (It might be called simply CMSS on some Audigies.) If so, select that. If you have a stereo surround option, select that. For the Audigy 2 ZS, for example, CMSS3D stereo surround will route the same stereo signal to Line-out & 2 (and optionally to Line-out 3).
    rle68 wrote:
    audigy sound card older card sb9400 ? sound about right ?
    program is pcdj this is the same sound card we used on an older pc same configuration... it worked fine for about an hour then stopped
    it plays fine sound is fine.. just plays out one port on the sound card only i need the second port
    o/s win2000
    just playing mp3's thru the mixing board out to 4 speakers
    everything worked then it stopped....just not sure if its a software setting the older pc was using xp pro
    this is a faster pc but i like 2000 better
    hope that helps and thanks
    Message Edited by Katman on 03-05-20060:20 PM

  • I have an apogee ensemble that I am using with Logic that was working fine 2 days ago but now it is seeing the apogee but giving me a conflict era and I can't get sound through my mixing board. What could be causing it, I haven't changed any settings

    I have an apogee ensemble that I am using with Logic that was working fine 2 days ago but now it is seeing the apogee but giving me a conflict era and I can't get sound through my mixing board. What could be causing it, I haven't changed any settings

    OK, but in my ipad, the apple id i have in itues is already the one  iwant to have, but th one i used to sin in for i-coud is the other one. Any tip as to how to change the apple id for icloud and any idea how to know what apps i bought with the other apple id so as to delete them from my ipad to avoid being asked to enter another apple id every time they get updated? thanks!

  • I just bought a docking station for my iPad so I could plug into a mixing board and record a live show.  I was disappointed at the time limitation for the recordings.  What is the maximum amount you can record a song into GB for the iPad?

    I purchased a docking station for my iPad so that I could record a live recording of my band directly from a mixing board this weekend using GarageBand.  Unfortunately, I was unaware of the song length limitations of the iPad version of this program.  Basically, was unable to capture more than 15 minutes of the gig.  I've read other conversations on this forum and can't really determine the maximum amount of time this application can record.  Can anyone tell me how long GarageBand for ipad can record at one single time and how to adjust the settings to achieve this?  Also, is anyone aware of any other apps than could be used to record a longer please share.  Thanks.
    CP

    I received an email reply from George, the Founder and CEO of Studiomini, he indicated to me that their app does not have any time limitations in regards to recording like GB does, you are only limited by the amount of free space on your iPad.  Fo what it's worth, I think the Alesis IO Dock is an amazing piece of equipment.  I would highly recommend purchasing the IO Dock and plugging your mixing board into the dock to capture your rehearsal.  Hopefully the feedback I received from Studiomini is accurate and I can capture my entire rehearsal at one time.  I hope this feedback helps.  One last note, apparently their will be a update soon to view Studiomni in the landscape view on the iPad instead of just the portrait view.

  • Best recommended mixing board with usb or lightning output to iMac or iPad for GarageBand?

    hi,
    set-up - 2010 iMac w/ intel core i7 processor @ 2.8 GHz, 16 GB RAM, latest mac os x 10.9 "maverick" update and the latest version updated of garage band; also, iPad third generation 64 GB wi-fi only with the latest version of iOS 7.0.3 and iOS GarageBand app v. 2.0 (3090.25). i also have the adapter apple sold for the iPad that gives it a usb interface - this was for usb sticks that had photos, but i'm hoping it'll work well with GarageBand also.
    i'm wanting to do some podcast audio recording with multiple inputs (audio round table discussion setting), as well as some home studio recording (mostly acoustic guitar work). i already have several good mics.
    i am looking for a mix board that will interface well with digital output to the GarageBand on the iMac, preferably to both the iMac and the GarageBand app on the iPad also. i want the mix board to have some form of _modern_ digital out, preferably usb (but could work, maybe, with lightning/thunder). the iPad is for when i want to record something on the road for a podcast, the iMac stays in my home office/studio. i'm looking for a mix board fitting these specs that i could pick up fairly reasonably on ebay or the like.
    i've looked a bit at tascam and alesis. i was wondering what folks here might recommend and what their experience is? also, if not a mix board, then what would you recommend for a multiple digital interface input of the mics, say four or five at a time, going into the iMac or iPad for live recording?
    i look forward to your advisement, stories and tips on this. thank you.
    best,
    —  faddah wolf
          portland, oregon

    It looks like these boards are "class compliant" USB, meaning there are no drivers to install, it's basic plug-and-play.
    To use it in Garageband you would have to go to (Garageband) preferences and set it up as the recording/playback device.  The Mac's system preferences have nothing to do with a (decent) audio program's audio device selection.
    Garageband probably defaults to built-in-audio.
    The problem you will have is that the USB output is probably stereo only. You can record multiple inputs, but only as a stereo Mix. (or two mono tracks). I say probably because I don't really know. It doesn't prevent you from laying down tracks one (stereo) or two (mono) at a time.

  • Audio Out To A Mixing Board

    Is there some way to hook up an external mixing board to a Mac and use that for audio mixing instead of using the faders in FCP? My wife can do this at work with an AVID but I'm trying to figure this out with FCP so I can automate a mix.
    Maybe I'm asking for too much?
    Thanks in advance.

    I have a Tascam FW1082 and I can use it to adjust the audio levels in FCP...using the mackie control interface.
    Read the PDF on how to do this here:
    http://www.larryjordan.biz/goodies.html
    Shane

  • Logic express and digidesign 002 mixing board

    I just installed Logic Express 7.2.3 but it doesn't seem to recognize my digidesign 002 mixing board. Is there anyone that can help me set this up so that I can use my 002 to record guitar and vocals into Logic express?

    You need to let Logic now that it is there. Although you have it physically hooked up it needs to be vertually hooked up too.
    Go to you Utilities folder & open up the Audio Midi Setup. You need to define your Digi002 here & make midi connections etc.

  • Digital Mixing board recommendations?

    I've had Logic Express 7 for about a year. I've been using my 4-track as a mixing board up till this point. My 4-track just got stolen so I want to replace it with a digital board that I can use to record multiple tracks independently and then mix them after I have recorded them. I don't need a lot of tracks, just some options. I want to make sure that the board I get is compatible with the computer and logic express and that I can plug it in and go, or, do I need other stuff too? I don't really want to spend a ton either.... and suggestions?

    I've had Logic Express 7 for about a year. I've been
    using my 4-track as a mixing board up till this
    point. My 4-track just got stolen so I want to
    replace it with a digital board that I can use to
    record multiple tracks independently and then mix
    them after I have recorded them. I don't need a lot
    of tracks, just some options. I want to make sure
    that the board I get is compatible with the computer
    and logic express and that I can plug it in and go,
    or, do I need other stuff too? I don't really want
    to spend a ton either.... and suggestions?
    Hi,
    Well...for a good quality mixing board that is digital,you're looking to spend a few grand.There are some options which I have used before with sucess,like the Tascam DM-24,now not in production,which can run you about 1,500 USD for a used one.Also you can check out products by Yamaha as well,they are good too.
    It seems though,that if you are only planning to do 4-8 channels of simultaneous recording (recoring-at-one-time) you can get away with using a multichannel audio interface,and mixing all "inside-the-box" i.e. in the computer itself.Logic is quite good at that.
    Here's a rough demo of mine done completely in Logic Pro,and even exported using Logic's mp3 encoder:
    http://www.nicksevilla.com/music/traveltime.mp3
    Cheers,
    noeqplease

  • No Effects in Sonar4 or CL mixing board-Xi Fi Plat

    Hello...
    I have no effects in the Xi Fi mixing board or my Sonar 4. I cant be the only person with
    this problem. Seems like the two are fighting each other for level control and effect use.
    Outside music creation all is okay.

    I have your same type of problems with X-FI Fatalyty card, There are none type of effects for Midi Tracks in music creation mode console, but the same problem is present if you use the creative player to reproduce midi files...
    Maybe to update last drivers...

  • Have hp pavilion dv7-3165dx I have sound going through mixing board but not coming out speakers

    I can't get sound to come out speakers. Just shut down  and when it came back up,no sound.it shows that i have sound on mixing board

    @rerateusa
    Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
    http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&​lc=en
    Go into Control Panel,Programs & Features-uninstall IDT software.Restart the laptop and install using the downloaded file.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Mixer Board

    I was wondering if there is a way to hook up a Behringer mixer board (or any other mixer) to my iMac and record with Garage Band or Sountrack?

    You will probably get more responses if you repost in the GarageBand Forums. The users there more than likely have more knowledge about using mixers.
    Also, since your system info shows you have an Intel iMac you should also crosspost in the Intel-based iMac Forums.
    This area is the G5 iMac Forum.

  • Mixing board

    I have Apple Logic Express, and I will be upgrading to full Logic. I am looking for a mixing board that supports Logic so I can use pan knobs and faders to control recording and playback rather then the mouse. Any suggestions?

    Is there any reason why you need a "mixing board" - ie one that actually mixes audio internally outside of Logic, versus a "control surface" which looks like a mixer (faders, knobs, transport etc) but actually is a just controller for Logic (ie no audio is mixed by the controller, it stays totally within Logic?)
    If you want a control surface, then I recommend the Mackie Control, or the Euphonics Mix series controllers.
    If you actually want an analog or digital mixer, that's a different set of recommendations. You also don't mention a budget, so I'm just saying what I recommend. There are budget options, but there are vastly inferior (but again, you don't mention any requirements, so perhaps a budget controller is all you need.)

  • Audio Mixing Board for PPCS4

    Does anyone know of or use an audio mixing board that would control the audio mixer in PPCS4?  One that moves the slider in PP when the physical sliders on the board are moved.  Thanks

    It is an area that would get a lot of flexing and pressure. I bet someone that knows how to solder can fix those up just fine.
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

  • I can not Keep shuffle on. It keeps turning off and I do not want to use Genius mixes as I want a variety at all times.  How do I fix this. It did not happen with my previous ipod.

    can not keep shuffle on. i do not want to use Genises mixes as i want to listen to a variety of musicnot the same type.

    Can anyone help me

Maybe you are looking for

  • Strange sRGB soft-proofing behavior

    I am wondering if the CMS gurus might have an idea about this: I am using Photoshop CC, but had a similar experience with the previous version and on a different machine. I have a wide gamut NEC monitor which has been profiled using i1 Display. The g

  • AFP slowdowns

    AFP slowdowns, Dual G5 2Ghz, 4GB Ram. Have 1 to 200 clients logging in, have a throughput of 4MB to 6MB/sec, then slows down to 200KB/sec. Takes the kids a while to login, word takes forever Not sure what is casing the slowdown but its really *******

  • Where is the New CSS Rule   button that was in the properties tab?

    There used to be a plus button in the properties tab.  In Dreamweaver CS6 it is gone.  I loaded in a tracing image, I want to type the * tag so the image and everything else will align to the upper left coordinates 0,0. Sean

  • Iphoto dosent find my Images

    What do i do? I start importing but dosent work. It displays pictures but their all gray. I tried to reconnet the iphone and restart Iphoto. But dosent work! Dosent work in iamge capture either. I want to import a photo and video with Iphoto but no l

  • Bad Issue playing Age of Empires III

    Hi everyone, I have a Pre february 08 MBP which I recently upgraded to Leopard. The computer fits all the minimum and recommended system requirements for Age of Empires III. The game runs fine with the graphics maxed out, Until, I started to play the