Using a Monitor TV as a second monitor

I just got an iMac and everything is working just fine except that I want to use my TV Monitor (it's a LG) as a second monitor and for some reason it just doesn't seem to work. I tried going to System Preferences and clicking the "detect display" button but nothing happens. My monitor just shows the "no signal" message intermitently. I'm using no adapter, except the mini-HDMI cable I bought directly from the Apple reseller (we have no Apple Store in my country).
Thank you!

I would if I had one. But I just have this monitor to test. The odd thing is both the Mac and the monitor are new. I bought this iMac today and the monitor just a few months ago.

Similar Messages

  • How can i use my smart TV as a second monitor for my Power mac (2010) via HDMI cable? i've made the connection but no options show in system prefs display.

    How can i use my smart TV as a second monitor for my Power mac (2010) via HDMI cable? i've made the connection but no options show in system prefs display.
    the computer:Mac Pro, Mac OS X (10.9.5), 2 x 2.66 Ghz 6-Core intel Xeon
    the TV: LG Smart tv

    The Mac uses a highly-parameterized universal Driver for every display. The parameters are set at certain times when a query is sent to your display. The display MUST answer with its name and capabilities, or the screen stays dark. A TV set that is off or "not paying attention" because it is set to a different port when the query occurs will rarely answer, and so will often remain dark.
    You can use tools in the System Report to see whether your display has been detected at all. If it has, the report will look something like this, but its name will appear:
    The times when the query is sent are:
    • at Startup
    • at wake from sleep
    • when the Mac-end of the cable is inserted
    • when using the Option ( Detect Displays ) button in displays preferences

  • Is it possible to use my ipad 4 as a second monitor through a USB connection.

    Is it possible to use my ipad 4 as a second monitor through a USB connection.

    perhaps, but my information was current. I had the same question and was looking for and answer and found it. So I responded in order to help others who found this question and were looking for an answer. This community is made more helpful and kept current by adding new answers with current information.
    imobl... air display was a valid response for 2011 predating the question. Also using Monitor2go was valid in 2012. There were USB mirroring and as a 2nd display for an iPad options at the time the original question was asked.

  • I want to use my apple TV as a second monitor not a mirrored one, in other words, I want to use my TV as a second screen not a copy of my first screen,other people have asked this question but have been given mirroring answers. I want a second display.

    I want to use my apple TV as a second monitor not a mirrored one, in other words, I want to use my TV as a second screen not a copy of my first screen,other people have asked this question but have been given mirroring answers so I am spelling it out here very specifically. I want a second display. This should be possible and would be awesome. Anyone know how to do this?

    Nevermind I just installed it to try it and it's awesome, so happy right now, Thanks. All the things I had read about it on third party sites led me to believe it could not do extended desk tops, thanks for your help!

  • Can I use My Ibook G4 as a Second Monitor For My Mac Mini G4

    Hi
    I wonderd if theres any way of being able to use my 14'' Ibook G4 as a second monitor for my Mac Mini G4? I already have a Samsung SyncMaster 913n. Is there any way of doing this by firewire using both monitors, if not what cables would I need?
    Thanks

    There is a application called Synergy which you may find useful. It allows the keyboard, mouse and clipboard to be shared across computers, and even different operating systems. It's not strictly what you have asked for as each computer still runs it's applications (and operating system) separately, meaning you can not drag windows between the screens, but by allowing you to copy and paste between the computers, and seamlessly slide your mouse and keyboard input between them you may get the effect you desire. Oh, and it is free and open-source, so why not give it a whirl?
    You will need to connect the machines with a TCP/IP network, which can be done either with an ethernet patch cable, or alternatively as you suggest, using FireWire - these two articles may assist you in setting that up: IP over FireWire in Panther and Tiger.
    As a point of note, a commercial program, MaxiVista allows exactly what you are looking for under Microsoft Windows.
    Hope that helps.
    Jason

  • Can I use my Pavilion HP7 as a second monitor for my workstation?

    I have a HP Pavilion DV7 with Windows 7 ultimate installed.  I want ot use the screen as a second monitor for my desktop workstation, which is where my fligh simulator is installed.      (The desktop is a Lenovo and the graphic card allows for 2 HDMI screens)
    Can I connect my HP laptop to the desktop machine in such a way as the laptop does nothing except provide a screen for the Lenovo?  (If you've ever got serious about flight simulator you'll know how much you need two or even three screens!! )  

    Hi,
    No you can't you can use other monitor as second monitor for your laptop BUT you can't use laptop monitor as second monitor for other machine.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Can I add a second monitor to my MacBook Air notebook and use both monitors simultaneously?

    Can I add a second monitor to my MacBook Air notebook and use both monitors simultaneously?  For example, have a spreadsheet open on the notebook monitor while the second monitor is displaying an architectural drawing?

    MiniDisplay-to-? adapters ... ? replaced by VGA or DVI or HDMI
    Best to use only 1 adapter to match the intended cable since mutliple-adapter setup (buy a VGA, then add VGA-DVI adapter) tendsto lose signal strength.
    Also graphics chips run hotter driving external display, and since the graphics chip in Air is part of the CPU the CPU may throttle itself as the integrated graphics chip heats up.
    Two modes of operation:
    Mirror ... same image both displays
    Extended ... the other screen is "extra screen space"

  • I want to use my old iMac G3 as second monitor to my MacBook Pro, how?

    I want to use my old iMac G3 as second monitor to my MacBook Pro, how?
    Thanks!

    You can't really do it in any normal way; that is, using the MacBook's video output port.
    You can use this program
    http://www.screenrecycler.com/home.html
    to make your iMac screen act as a second display, over a network connection. ScreenRecycler runs on your MacBook and creates a virtual second display. It uses the open-source VNC (screen sharing) protocol to serve that second display over the local network. You then run a VNC client program (usually free) on the iMac G3 and display the MacBooks virtual second screen in a window, which you can display full screen. Your iMac then appears to be the MacBook's second screen. You use System Preferences Displays pane to set it up, as you would a real second display.
    How well this works depends on your iMac's speed, what Mac OS version it runs, and the speed of the network connection. If you connect the two directly with an Ethernet cable (Cat-5 or better), the network speed should be decently fast (at 100Base-T). If your iMac G3 has Tiger (10.4), you can use this program as the VNC client
    http://www.jinx.de/JollysFastVNC.html
    (there are free VNC clients for 10.3 and earlier)
    However, this solution will never be as fast (in terms of screen refresh rate) as a real display using a real video connection. But you can try it at no cost, to see if it meets your needs.

  • HT4293 i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

    i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

    <http://support.apple.com/kb/HT5891>
    You can use USB for the Apple trackpad.
    <http://www.mobeetechnology.com/the-power-bar.html>

  • When I open a pdf file, after a few seconds, it hides the toolbar and I don't know how to get it back.  I use multiple monitors and, without being able to grab the toolbar, I am unable to move the pdf file to a different monitor.  How do I stop this?

    When I open a pdf file, after a few seconds, it hides the toolbar and I don't know how to get it back.  I use multiple monitors and, without being able to grab the toolbar, I am unable to move the pdf file to a different monitor.  How do I stop this?

    Does Firefox switch to full screen if you press F11 ?
    You can also try the F10 key to see if that brings up the menu bar.
    * If the above steps didn't help then see http://kb.mozillazine.org/Corrupt_localstore.rdf
    Note: Do not delete localstore.rdf in the program folder (Windows: "C:\Program Files\Mozilla Firefox\defaults\profile\") (Mac: "/Applications/Firefox.app/defaults/profile/")

  • Issues with using 3 monitors on 2 external gpu

    Hi,
    I have some issues with configuring Xorg to use 3 monitors. I have 2 external graphic cards (same model, no SLI). Monitors connected to the first gpu are recognized ok but I can't configure my 3rd monitor conencted to the second gpu via HDMI nor DVI.
    1st is recognized as DVI-I-1, 2nd is DP-1 in first card, 3rd monitor is in second card (bus 22:00.0) as DP-1-2 (also tried connecting as DVI-I-2). I can see them in Xorg log but I can't configure my 3rd monitor via kscreen nor xrandr. :-/
    lspci |grep VGA:
    03:00.0 VGA compatible controller: NVIDIA Corporation GF108GL [Quadro 600] (rev a1)
    22:00.0 VGA compatible controller: NVIDIA Corporation GF108GL [Quadro 600] (rev a1)
    xrandr:
    Screen 0: minimum 320 x 200, current 3840 x 1080, maximum 8192 x 8192
    DVI-I-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 527mm x 297mm
    1920x1080 60.0*+
    1600x900 60.0
    1280x1024 75.0 60.0
    1152x864 75.0
    1024x768 75.1 60.0
    800x600 75.0 60.3
    640x480 75.0 60.0
    720x400 70.1
    DP-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 527mm x 297mm
    1920x1080 60.0*+
    1600x900 60.0
    1280x1024 75.0 60.0
    1152x864 75.0
    1024x768 75.1 60.0
    800x600 75.0 60.3
    640x480 75.0 60.0
    720x400 70.1
    Xorg config (autoconfig enable only 2 monitors, I generated config and tried to edit it with no luck, I noticed there is PCI:34:0:0 generated by Xorg so I also tried to change it to 22:0:0, I also tried to add that option "Monitor-<output>" but same result):
    Section "ServerLayout"
    Identifier "X.org Configured"
    #Screen 0 "Screen0" 0 0
    #Screen 1 "Screen1" RightOf "Screen0"
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/TTF/"
    FontPath "/usr/share/fonts/OTF/"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    EndSection
    Section "Module"
    Load "glx"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "DELL"
    Option "Monitor-DVI-I-1" "DVI-I-1"
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "DELL"
    Option "Monitor-DP-1" "DP-1"
    EndSection
    Section "Monitor"
    Identifier "Monitor2"
    VendorName "DELL"
    Option "Monitor-DP-1-2" "DP-1-2"
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "nouveau"
    BusID "PCI:3:0:0"
    Option "Monitor-DVI-I-1"
    Option "Monitor-DP-1"
    EndSection
    Section "Device"
    Identifier "Card1"
    Driver "nouveau"
    BusID "PCI:34:0:0"
    Option "Monitor-DP-1-2"
    EndSection
    Xorg log (I can see that monitor at time 1767.316):
    [ 1766.959]
    X.Org X Server 1.14.5
    Release Date: 2013-12-12
    [ 1766.960] X Protocol Version 11, Revision 0
    [ 1766.960] Build Operating System: Linux 3.12.5-1-ARCH x86_64
    [ 1766.960] Current Operating System: Linux CZ09DT1XM5002 3.12.5-1-ARCH #1 SMP PREEMPT Thu Dec 12 12:57:31 CET 2013 x86_64
    [ 1766.960] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=e2c593e5-b0f4-4c74-84fd-5a88db345ca4 rw quiet
    [ 1766.961] Build Date: 13 December 2013 03:11:42PM
    [ 1766.962]
    [ 1766.962] Current version of pixman: 0.32.4
    [ 1766.963] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 1766.963] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 1766.965] (==) Log file: "/var/log/Xorg.1.log", Time: Thu Jan 2 12:43:56 2014
    [ 1766.965] (++) Using config file: "/etc/X11/xorg.conf.d/20-multimonitor.conf"
    [ 1766.966] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 1766.966] (==) ServerLayout "X.org Configured"
    [ 1766.966] (==) No screen section available. Using defaults.
    [ 1766.966] (**) |-->Screen "Default Screen Section" (0)
    [ 1766.966] (**) | |-->Monitor "<default monitor>"
    [ 1766.966] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 1766.966] (**) | |-->Device "Card0"
    [ 1766.966] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 1766.966] (**) |-->Input Device "Mouse0"
    [ 1766.966] (**) |-->Input Device "Keyboard0"
    [ 1766.966] (==) Automatically adding devices
    [ 1766.966] (==) Automatically enabling devices
    [ 1766.966] (==) Automatically adding GPU devices
    [ 1766.966] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 1766.966] Entry deleted from font path.
    [ 1766.966] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 1766.966] Entry deleted from font path.
    [ 1766.966] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 1766.966] Entry deleted from font path.
    [ 1766.966] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 1766.967] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 1766.967] Entry deleted from font path.
    [ 1766.967] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 1766.967] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 1766.967] Entry deleted from font path.
    [ 1766.967] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 1766.967] Entry deleted from font path.
    [ 1766.967] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 1766.967] Entry deleted from font path.
    [ 1766.967] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 1766.967] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 1766.967] Entry deleted from font path.
    [ 1766.967] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 1766.967] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 1766.967] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 1766.967] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 1766.967] (WW) Disabling Mouse0
    [ 1766.967] (WW) Disabling Keyboard0
    [ 1766.967] (II) Loader magic: 0x7fec20
    [ 1766.967] (II) Module ABI versions:
    [ 1766.967] X.Org ANSI C Emulation: 0.4
    [ 1766.967] X.Org Video Driver: 14.1
    [ 1766.967] X.Org XInput driver : 19.1
    [ 1766.967] X.Org Server Extension : 7.0
    [ 1766.967] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 1766.967] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 1767.169] (--) PCI:*(0:3:0:0) 10de:0df8:10de:0835 rev 161, Mem @ 0xc6000000/16777216, 0xc8000000/134217728, 0xd0000000/33554432, I/O @ 0x00007000/128, BIOS @ 0x????????/524288
    [ 1767.169] (--) PCI: (0:34:0:0) 10de:0df8:10de:0835 rev 161, Mem @ 0xfa000000/16777216, 0xf0000000/134217728, 0xf8000000/33554432, I/O @ 0x0000f000/128, BIOS @ 0x????????/524288
    [ 1767.169] Initializing built-in extension Generic Event Extension
    [ 1767.170] Initializing built-in extension SHAPE
    [ 1767.170] Initializing built-in extension MIT-SHM
    [ 1767.170] Initializing built-in extension XInputExtension
    [ 1767.171] Initializing built-in extension XTEST
    [ 1767.171] Initializing built-in extension BIG-REQUESTS
    [ 1767.172] Initializing built-in extension SYNC
    [ 1767.172] Initializing built-in extension XKEYBOARD
    [ 1767.172] Initializing built-in extension XC-MISC
    [ 1767.173] Initializing built-in extension SECURITY
    [ 1767.173] Initializing built-in extension XINERAMA
    [ 1767.174] Initializing built-in extension XFIXES
    [ 1767.174] Initializing built-in extension RENDER
    [ 1767.174] Initializing built-in extension RANDR
    [ 1767.175] Initializing built-in extension COMPOSITE
    [ 1767.175] Initializing built-in extension DAMAGE
    [ 1767.175] Initializing built-in extension MIT-SCREEN-SAVER
    [ 1767.176] Initializing built-in extension DOUBLE-BUFFER
    [ 1767.176] Initializing built-in extension RECORD
    [ 1767.176] Initializing built-in extension DPMS
    [ 1767.177] Initializing built-in extension X-Resource
    [ 1767.177] Initializing built-in extension XVideo
    [ 1767.177] Initializing built-in extension XVideo-MotionCompensation
    [ 1767.178] Initializing built-in extension XFree86-VidModeExtension
    [ 1767.178] Initializing built-in extension XFree86-DGA
    [ 1767.178] Initializing built-in extension XFree86-DRI
    [ 1767.179] Initializing built-in extension DRI2
    [ 1767.179] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 1767.179] (II) LoadModule: "glx"
    [ 1767.179] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 1767.179] (II) Module glx: vendor="X.Org Foundation"
    [ 1767.179] compiled for 1.14.5, module version = 1.0.0
    [ 1767.179] ABI class: X.Org Server Extension, version 7.0
    [ 1767.179] (==) AIGLX enabled
    [ 1767.180] Loading extension GLX
    [ 1767.180] (II) LoadModule: "nouveau"
    [ 1767.180] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    [ 1767.180] (II) Module nouveau: vendor="X.Org Foundation"
    [ 1767.180] compiled for 1.14.4, module version = 1.0.10
    [ 1767.180] Module class: X.Org Video Driver
    [ 1767.180] ABI class: X.Org Video Driver, version 14.1
    [ 1767.180] (II) NOUVEAU driver
    [ 1767.180] (II) NOUVEAU driver for NVIDIA chipset families :
    [ 1767.180] RIVA TNT (NV04)
    [ 1767.180] RIVA TNT2 (NV05)
    [ 1767.180] GeForce 256 (NV10)
    [ 1767.180] GeForce 2 (NV11, NV15)
    [ 1767.180] GeForce 4MX (NV17, NV18)
    [ 1767.180] GeForce 3 (NV20)
    [ 1767.180] GeForce 4Ti (NV25, NV28)
    [ 1767.180] GeForce FX (NV3x)
    [ 1767.180] GeForce 6 (NV4x)
    [ 1767.180] GeForce 7 (G7x)
    [ 1767.180] GeForce 8 (G8x)
    [ 1767.180] GeForce GTX 200 (NVA0)
    [ 1767.180] GeForce GTX 400 (NVC0)
    [ 1767.180] (--) using VT number 3
    [ 1767.182] (II) [drm] nouveau interface version: 1.1.1
    [ 1767.183] (II) [drm] nouveau interface version: 1.1.1
    [ 1767.183] (II) Loading sub module "dri2"
    [ 1767.183] (II) LoadModule: "dri2"
    [ 1767.183] (II) Module "dri2" already built-in
    [ 1767.183] (--) NOUVEAU(0): Chipset: "NVIDIA NVC1"
    [ 1767.183] (II) NOUVEAU(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 1767.183] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
    [ 1767.183] (==) NOUVEAU(0): RGB weight 888
    [ 1767.183] (==) NOUVEAU(0): Default visual is TrueColor
    [ 1767.183] (==) NOUVEAU(0): Using HW cursor
    [ 1767.183] (==) NOUVEAU(0): GLX sync to VBlank disabled.
    [ 1767.183] (==) NOUVEAU(0): Page flipping enabled
    [ 1767.183] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
    [ 1767.222] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
    [ 1767.230] (II) NOUVEAU(0): Output DP-1 has no monitor section
    [ 1767.265] (II) NOUVEAU(0): EDID for output DVI-I-1
    [ 1767.265] (II) NOUVEAU(0): Manufacturer: DEL Model: a09b Serial#: 827608652
    [ 1767.265] (II) NOUVEAU(0): Year: 2013 Week: 41
    [ 1767.265] (II) NOUVEAU(0): EDID Version: 1.3
    [ 1767.265] (II) NOUVEAU(0): Digital Display Input
    [ 1767.265] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 53 vert.: 30
    [ 1767.265] (II) NOUVEAU(0): Gamma: 2.20
    [ 1767.265] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
    [ 1767.265] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 1767.265] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 1767.265] (II) NOUVEAU(0): redX: 0.650 redY: 0.338 greenX: 0.320 greenY: 0.613
    [ 1767.265] (II) NOUVEAU(0): blueX: 0.154 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
    [ 1767.265] (II) NOUVEAU(0): Supported established timings:
    [ 1767.265] (II) NOUVEAU(0): 720x400@70Hz
    [ 1767.265] (II) NOUVEAU(0): 640x480@60Hz
    [ 1767.265] (II) NOUVEAU(0): 640x480@75Hz
    [ 1767.265] (II) NOUVEAU(0): 800x600@60Hz
    [ 1767.265] (II) NOUVEAU(0): 800x600@75Hz
    [ 1767.265] (II) NOUVEAU(0): 1024x768@60Hz
    [ 1767.265] (II) NOUVEAU(0): 1024x768@75Hz
    [ 1767.265] (II) NOUVEAU(0): 1280x1024@75Hz
    [ 1767.265] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 1767.265] (II) NOUVEAU(0): Supported standard timings:
    [ 1767.265] (II) NOUVEAU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 1767.265] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 1767.265] (II) NOUVEAU(0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321
    [ 1767.265] (II) NOUVEAU(0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
    [ 1767.265] (II) NOUVEAU(0): Supported detailed timing:
    [ 1767.265] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 527 x 297 mm
    [ 1767.265] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 1767.265] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 1767.265] (II) NOUVEAU(0): Serial No: 36WJX3A91TNL
    [ 1767.265] (II) NOUVEAU(0): Monitor name: DELL P2414H
    [ 1767.265] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
    [ 1767.265] (II) NOUVEAU(0): EDID (in hex):
    [ 1767.265] (II) NOUVEAU(0): 00ffffffffffff0010ac9ba04c4e5431
    [ 1767.265] (II) NOUVEAU(0): 2917010380351e78eaa0a5a656529d27
    [ 1767.265] (II) NOUVEAU(0): 0f5054a54b00714f8180a9c0d1c00101
    [ 1767.265] (II) NOUVEAU(0): 010101010101023a801871382d40582c
    [ 1767.265] (II) NOUVEAU(0): 45000f292100001e000000ff00333657
    [ 1767.265] (II) NOUVEAU(0): 4a5833413931544e4c0a000000fc0044
    [ 1767.265] (II) NOUVEAU(0): 454c4c205032343134480a20000000fd
    [ 1767.265] (II) NOUVEAU(0): 00384c1e5311000a20202020202000c2
    [ 1767.265] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
    [ 1767.265] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 1767.273] (II) NOUVEAU(0): EDID for output DP-1
    [ 1767.273] (II) NOUVEAU(0): Manufacturer: DEL Model: a09a Serial#: 844123724
    [ 1767.273] (II) NOUVEAU(0): Year: 2013 Week: 41
    [ 1767.273] (II) NOUVEAU(0): EDID Version: 1.4
    [ 1767.273] (II) NOUVEAU(0): Digital Display Input
    [ 1767.273] (II) NOUVEAU(0): 8 bits per channel
    [ 1767.273] (II) NOUVEAU(0): Digital interface is DisplayPort
    [ 1767.273] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 53 vert.: 30
    [ 1767.273] (II) NOUVEAU(0): Gamma: 2.20
    [ 1767.273] (II) NOUVEAU(0): DPMS capabilities: Off
    [ 1767.273] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
    [ 1767.273] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 1767.273] (II) NOUVEAU(0): Preferred mode is native pixel format and refresh rate
    [ 1767.273] (II) NOUVEAU(0): redX: 0.650 redY: 0.338 greenX: 0.320 greenY: 0.613
    [ 1767.273] (II) NOUVEAU(0): blueX: 0.154 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
    [ 1767.273] (II) NOUVEAU(0): Supported established timings:
    [ 1767.273] (II) NOUVEAU(0): 720x400@70Hz
    [ 1767.273] (II) NOUVEAU(0): 640x480@60Hz
    [ 1767.273] (II) NOUVEAU(0): 640x480@75Hz
    [ 1767.273] (II) NOUVEAU(0): 800x600@60Hz
    [ 1767.273] (II) NOUVEAU(0): 800x600@75Hz
    [ 1767.273] (II) NOUVEAU(0): 1024x768@60Hz
    [ 1767.273] (II) NOUVEAU(0): 1024x768@75Hz
    [ 1767.273] (II) NOUVEAU(0): 1280x1024@75Hz
    [ 1767.273] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 1767.273] (II) NOUVEAU(0): Supported standard timings:
    [ 1767.273] (II) NOUVEAU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 1767.273] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 1767.273] (II) NOUVEAU(0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321
    [ 1767.273] (II) NOUVEAU(0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
    [ 1767.273] (II) NOUVEAU(0): Supported detailed timing:
    [ 1767.273] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 527 x 297 mm
    [ 1767.273] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 1767.273] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 1767.273] (II) NOUVEAU(0): Serial No: 36WJX3A92PNL
    [ 1767.273] (II) NOUVEAU(0): Monitor name: DELL P2414H
    [ 1767.273] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
    [ 1767.273] (II) NOUVEAU(0): EDID (in hex):
    [ 1767.273] (II) NOUVEAU(0): 00ffffffffffff0010ac9aa04c4e5032
    [ 1767.273] (II) NOUVEAU(0): 29170104a5351e783aa0a5a656529d27
    [ 1767.273] (II) NOUVEAU(0): 0f5054a54b00714f8180a9c0d1c00101
    [ 1767.273] (II) NOUVEAU(0): 010101010101023a801871382d40582c
    [ 1767.273] (II) NOUVEAU(0): 45000f292100001e000000ff00333657
    [ 1767.273] (II) NOUVEAU(0): 4a5833413932504e4c0a000000fc0044
    [ 1767.273] (II) NOUVEAU(0): 454c4c205032343134480a20000000fd
    [ 1767.273] (II) NOUVEAU(0): 00384c1e5311000a2020202020200053
    [ 1767.273] (II) NOUVEAU(0): Printing probed modes for output DP-1
    [ 1767.273] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Output DVI-I-1 connected
    [ 1767.273] (II) NOUVEAU(0): Output DP-1 connected
    [ 1767.273] (II) NOUVEAU(0): Using exact sizes for initial modes
    [ 1767.273] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080
    [ 1767.273] (II) NOUVEAU(0): Output DP-1 using initial mode 1920x1080
    [ 1767.273] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 1767.274] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 1767.274] (**) NOUVEAU(0): Mode "1600x900": 119.0 MHz (scaled from 0.0 MHz), 55.9 kHz, 60.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 1767.274] (==) NOUVEAU(0): DPI set to (96, 96)
    [ 1767.274] (II) Loading sub module "fb"
    [ 1767.274] (II) LoadModule: "fb"
    [ 1767.274] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 1767.274] (II) Module fb: vendor="X.Org Foundation"
    [ 1767.274] compiled for 1.14.5, module version = 1.0.0
    [ 1767.274] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1767.274] (II) Loading sub module "exa"
    [ 1767.274] (II) LoadModule: "exa"
    [ 1767.274] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 1767.274] (II) Module exa: vendor="X.Org Foundation"
    [ 1767.274] compiled for 1.14.5, module version = 2.6.0
    [ 1767.274] ABI class: X.Org Video Driver, version 14.1
    [ 1767.274] (II) Loading sub module "shadowfb"
    [ 1767.274] (II) LoadModule: "shadowfb"
    [ 1767.274] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    [ 1767.274] (II) Module shadowfb: vendor="X.Org Foundation"
    [ 1767.274] compiled for 1.14.5, module version = 1.0.0
    [ 1767.274] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1767.274] (II) Loading sub module "dri2"
    [ 1767.274] (II) LoadModule: "dri2"
    [ 1767.274] (II) Module "dri2" already built-in
    [ 1767.274] (--) NOUVEAU(G0): Chipset: "NVIDIA NVC1"
    [ 1767.275] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
    [ 1767.275] (==) NOUVEAU(G0): RGB weight 888
    [ 1767.275] (==) NOUVEAU(G0): Default visual is TrueColor
    [ 1767.275] (==) NOUVEAU(G0): Using HW cursor
    [ 1767.275] (==) NOUVEAU(G0): GLX sync to VBlank disabled.
    [ 1767.275] (==) NOUVEAU(G0): Page flipping enabled
    [ 1767.275] (==) NOUVEAU(G0): Swap limit set to 2 [Max allowed 2]
    [ 1767.308] (II) NOUVEAU(G0): Output DVI-I-1-2 has no monitor section
    [ 1767.316] (II) NOUVEAU(G0): Output DP-1-2 has no monitor section
    [ 1767.339] (II) NOUVEAU(G0): EDID for output DVI-I-1-2
    [ 1767.347] (II) NOUVEAU(G0): EDID for output DP-1-2
    [ 1767.347] (II) NOUVEAU(G0): Manufacturer: DEL Model: a09a Serial#: 844124236
    [ 1767.347] (II) NOUVEAU(G0): Year: 2013 Week: 41
    [ 1767.347] (II) NOUVEAU(G0): EDID Version: 1.4
    [ 1767.347] (II) NOUVEAU(G0): Digital Display Input
    [ 1767.347] (II) NOUVEAU(G0): 8 bits per channel
    [ 1767.347] (II) NOUVEAU(G0): Digital interface is DisplayPort
    [ 1767.347] (II) NOUVEAU(G0): Max Image Size [cm]: horiz.: 53 vert.: 30
    [ 1767.347] (II) NOUVEAU(G0): Gamma: 2.20
    [ 1767.347] (II) NOUVEAU(G0): DPMS capabilities: Off
    [ 1767.347] (II) NOUVEAU(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
    [ 1767.347] (II) NOUVEAU(G0): First detailed timing is preferred mode
    [ 1767.347] (II) NOUVEAU(G0): Preferred mode is native pixel format and refresh rate
    [ 1767.347] (II) NOUVEAU(G0): redX: 0.650 redY: 0.338 greenX: 0.320 greenY: 0.613
    [ 1767.347] (II) NOUVEAU(G0): blueX: 0.154 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
    [ 1767.347] (II) NOUVEAU(G0): Supported established timings:
    [ 1767.347] (II) NOUVEAU(G0): 720x400@70Hz
    [ 1767.347] (II) NOUVEAU(G0): 640x480@60Hz
    [ 1767.347] (II) NOUVEAU(G0): 640x480@75Hz
    [ 1767.347] (II) NOUVEAU(G0): 800x600@60Hz
    [ 1767.347] (II) NOUVEAU(G0): 800x600@75Hz
    [ 1767.347] (II) NOUVEAU(G0): 1024x768@60Hz
    [ 1767.347] (II) NOUVEAU(G0): 1024x768@75Hz
    [ 1767.347] (II) NOUVEAU(G0): 1280x1024@75Hz
    [ 1767.348] (II) NOUVEAU(G0): Manufacturer's mask: 0
    [ 1767.348] (II) NOUVEAU(G0): Supported standard timings:
    [ 1767.348] (II) NOUVEAU(G0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 1767.348] (II) NOUVEAU(G0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 1767.348] (II) NOUVEAU(G0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321
    [ 1767.348] (II) NOUVEAU(G0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
    [ 1767.348] (II) NOUVEAU(G0): Supported detailed timing:
    [ 1767.348] (II) NOUVEAU(G0): clock: 148.5 MHz Image Size: 527 x 297 mm
    [ 1767.348] (II) NOUVEAU(G0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 1767.348] (II) NOUVEAU(G0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 1767.348] (II) NOUVEAU(G0): Serial No: 36WJX3A92PPL
    [ 1767.348] (II) NOUVEAU(G0): Monitor name: DELL P2414H
    [ 1767.348] (II) NOUVEAU(G0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
    [ 1767.348] (II) NOUVEAU(G0): EDID (in hex):
    [ 1767.348] (II) NOUVEAU(G0): 00ffffffffffff0010ac9aa04c505032
    [ 1767.348] (II) NOUVEAU(G0): 29170104a5351e783aa0a5a656529d27
    [ 1767.348] (II) NOUVEAU(G0): 0f5054a54b00714f8180a9c0d1c00101
    [ 1767.348] (II) NOUVEAU(G0): 010101010101023a801871382d40582c
    [ 1767.348] (II) NOUVEAU(G0): 45000f292100001e000000ff00333657
    [ 1767.348] (II) NOUVEAU(G0): 4a583341393250504c0a000000fc0044
    [ 1767.348] (II) NOUVEAU(G0): 454c4c205032343134480a20000000fd
    [ 1767.348] (II) NOUVEAU(G0): 00384c1e5311000a202020202020004f
    [ 1767.348] (II) NOUVEAU(G0): Printing probed modes for output DP-1-2
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 1767.348] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
    [ 1767.348] (**) NOUVEAU(G0): Mode "1920x1080": 173.0 MHz (scaled from 0.0 MHz), 67.2 kHz, 60.0 Hz
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz)
    [ 1767.348] (==) NOUVEAU(G0): DPI set to (96, 96)
    [ 1767.348] (II) Loading sub module "fb"
    [ 1767.348] (II) LoadModule: "fb"
    [ 1767.348] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 1767.348] (II) Module fb: vendor="X.Org Foundation"
    [ 1767.348] compiled for 1.14.5, module version = 1.0.0
    [ 1767.348] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1767.348] (II) Loading sub module "exa"
    [ 1767.348] (II) LoadModule: "exa"
    [ 1767.348] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 1767.348] (II) Module exa: vendor="X.Org Foundation"
    [ 1767.348] compiled for 1.14.5, module version = 2.6.0
    [ 1767.348] ABI class: X.Org Video Driver, version 14.1
    [ 1767.348] (II) Loading sub module "shadowfb"
    [ 1767.348] (II) LoadModule: "shadowfb"
    [ 1767.348] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    [ 1767.348] (II) Module shadowfb: vendor="X.Org Foundation"
    [ 1767.348] compiled for 1.14.5, module version = 1.0.0
    [ 1767.348] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1767.348] (--) Depth 24 pixmap format is 32 bpp
    [ 1767.351] (II) NOUVEAU(G0): Opened GPU channel 0
    [ 1767.359] (II) NOUVEAU(G0): [DRI2] Setup complete
    [ 1767.359] (II) NOUVEAU(G0): [DRI2] DRI driver: nouveau
    [ 1767.359] (II) NOUVEAU(G0): [DRI2] VDPAU driver: nouveau
    [ 1767.360] (II) EXA(256): Driver allocated offscreen pixmaps
    [ 1767.360] (II) EXA(256): Driver registered support for the following operations:
    [ 1767.360] (II) Solid
    [ 1767.360] (II) Copy
    [ 1767.360] (II) Composite (RENDER acceleration)
    [ 1767.360] (II) UploadToScreen
    [ 1767.360] (II) DownloadFromScreen
    [ 1767.360] (==) NOUVEAU(G0): Backing store disabled
    [ 1767.360] (==) NOUVEAU(G0): Silken mouse enabled
    [ 1767.360] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
    [ 1767.360] (II) NOUVEAU(G0): [XvMC] Extension initialized.
    [ 1767.360] (==) NOUVEAU(G0): DPMS enabled
    [ 1767.360] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 1767.360] (WW) NOUVEAU(G0): Option "Monitor-DVI-I-1" is not used
    [ 1767.360] (WW) NOUVEAU(G0): Option "Monitor-DP-1" is not used
    [ 1767.362] (II) NOUVEAU(0): Opened GPU channel 0
    [ 1767.366] (II) NOUVEAU(0): [DRI2] Setup complete
    [ 1767.366] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
    [ 1767.366] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
    [ 1767.366] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 1767.366] (II) EXA(0): Driver registered support for the following operations:
    [ 1767.366] (II) Solid
    [ 1767.366] (II) Copy
    [ 1767.366] (II) Composite (RENDER acceleration)
    [ 1767.366] (II) UploadToScreen
    [ 1767.366] (II) DownloadFromScreen
    [ 1767.366] (==) NOUVEAU(0): Backing store disabled
    [ 1767.366] (==) NOUVEAU(0): Silken mouse enabled
    [ 1767.366] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
    [ 1767.366] (II) NOUVEAU(0): [XvMC] Extension initialized.
    [ 1767.366] (==) NOUVEAU(0): DPMS enabled
    [ 1767.366] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 1767.366] (--) RandR disabled
    [ 1767.388] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 1767.388] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 1767.388] (II) AIGLX: enabled GLX_ARB_create_context
    [ 1767.388] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 1767.388] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 1767.388] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 1767.388] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 1767.389] (II) AIGLX: Loaded and initialized nouveau
    [ 1767.389] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 1767.390] (II) NOUVEAU(G0): NVEnterVT is called.
    [ 1767.393] (II) NOUVEAU(0): NVEnterVT is called.
    [ 1767.444] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
    [ 1767.444] resize called 1920 1080
    [ 1767.479] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 1767.479] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 1767.479] (II) LoadModule: "evdev"
    [ 1767.479] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 1767.479] (II) Module evdev: vendor="X.Org Foundation"
    [ 1767.479] compiled for 1.14.3, module version = 2.8.2
    [ 1767.479] Module class: X.Org XInput Driver
    [ 1767.479] ABI class: X.Org XInput driver, version 19.1
    [ 1767.479] (II) Using input driver 'evdev' for 'Power Button'
    [ 1767.479] (**) Power Button: always reports core events
    [ 1767.479] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 1767.479] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 1767.479] (--) evdev: Power Button: Found keys
    [ 1767.479] (II) evdev: Power Button: Configuring as keyboard
    [ 1767.479] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
    [ 1767.479] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 1767.479] (**) Option "xkb_rules" "evdev"
    [ 1767.479] (**) Option "xkb_model" "pc104"
    [ 1767.479] (**) Option "xkb_layout" "us"
    [ 1767.499] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 1767.499] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 1767.499] (II) Using input driver 'evdev' for 'Power Button'
    [ 1767.500] (**) Power Button: always reports core events
    [ 1767.500] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 1767.500] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 1767.500] (--) evdev: Power Button: Found keys
    [ 1767.500] (II) evdev: Power Button: Configuring as keyboard
    [ 1767.500] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event1"
    [ 1767.500] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 1767.500] (**) Option "xkb_rules" "evdev"
    [ 1767.500] (**) Option "xkb_model" "pc104"
    [ 1767.500] (**) Option "xkb_layout" "us"
    [ 1767.500] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 1767.500] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
    [ 1767.500] (II) No input driver specified, ignoring this device.
    [ 1767.500] (II) This device may have been added with another device file.
    [ 1767.500] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
    [ 1767.500] (II) No input driver specified, ignoring this device.
    [ 1767.500] (II) This device may have been added with another device file.
    [ 1767.500] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event12)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.501] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.501] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.501] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event9)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.501] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event8)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.501] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event7)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.502] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event10)
    [ 1767.502] (II) No input driver specified, ignoring this device.
    [ 1767.502] (II) This device may have been added with another device file.
    [ 1767.502] (II) config/udev: Adding input device DELL Dell USB Entry Keyboard (/dev/input/event4)
    [ 1767.502] (**) DELL Dell USB Entry Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 1767.502] (II) Using input driver 'evdev' for 'DELL Dell USB Entry Keyboard'
    [ 1767.502] (**) DELL Dell USB Entry Keyboard: always reports core events
    [ 1767.502] (**) evdev: DELL Dell USB Entry Keyboard: Device: "/dev/input/event4"
    [ 1767.502] (--) evdev: DELL Dell USB Entry Keyboard: Vendor 0x413c Product 0x2107
    [ 1767.502] (--) evdev: DELL Dell USB Entry Keyboard: Found keys
    [ 1767.502] (II) evdev: DELL Dell USB Entry Keyboard: Configuring as keyboard
    [ 1767.502] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/input/input5/event4"
    [ 1767.502] (II) XINPUT: Adding extended input device "DELL Dell USB Entry Keyboard" (type: KEYBOARD, id 8)
    [ 1767.502] (**) Option "xkb_rules" "evdev"
    [ 1767.502] (**) Option "xkb_model" "pc104"
    [ 1767.502] (**) Option "xkb_layout" "us"
    [ 1767.502] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event5)
    [ 1767.502] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 1767.502] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
    [ 1767.502] (**) Logitech USB Optical Mouse: always reports core events
    [ 1767.502] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event5"
    [ 1767.502] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc077
    [ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
    [ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
    [ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found relative axes
    [ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
    [ 1767.502] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
    [ 1767.502] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
    [ 1767.503] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 1767.503] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 1767.503] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input6/event5"
    [ 1767.503] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9)
    [ 1767.503] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
    [ 1767.503] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
    [ 1767.503] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
    [ 1767.503] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
    [ 1767.503] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
    [ 1767.503] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
    [ 1767.503] (II) No input driver specified, ignoring this device.
    [ 1767.503] (II) This device may have been added with another device file.
    [ 1767.503] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 1767.503] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event18)
    [ 1767.503] (II) No input driver specified, ignoring this device.
    [ 1767.503] (II) This device may have been added with another device file.
    [ 1767.504] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
    [ 1767.504] (II) No input driver specified, ignoring this device.
    [ 1767.504] (II) This device may have been added with another device file.
    [ 1767.504] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event16)
    [ 1767.504] (II) No input driver specified, ignoring this device.
    [ 1767.504] (II) This device may have been added with another device file.
    [ 1767.504] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
    [ 1767.504] (II) No input driver specified, ignoring this device.
    [ 1767.504] (II) This device may have been added with another device file.
    [ 1767.504] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 1767.504] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 1767.504] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 1767.504] (**) AT Translated Set 2 keyboard: always reports core events
    [ 1767.504] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 1767.504] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 1767.504] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 1767.504] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 1767.504] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 1767.504] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
    [ 1767.504] (**) Option "xkb_rules" "evdev"
    [ 1767.504] (**) Option "xkb_model" "pc104"
    [ 1767.504] (**) Option "xkb_layout" "us"
    [ 1767.505] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event19)
    [ 1767.505] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
    [ 1767.505] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
    [ 1767.505] (**) PS/2 Generic Mouse: always reports core events
    [ 1767.505] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event19"
    [ 1767.505] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
    [ 1767.505] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
    [ 1767.505] (--) evdev: PS/2 Generic Mouse: Found relative axes
    [ 1767.505] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
    [ 1767.505] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
    [ 1767.505] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    [ 1767.505] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 1767.505] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event19"
    [ 1767.505] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 11)
    [ 1767.505] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
    [ 1767.505] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    [ 1767.505] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
    [ 1767.505] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
    [ 1767.505] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
    [ 1767.505] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1)
    [ 1767.505] (II) No input driver specified, ignoring this device.
    [ 1767.505] (II) This device may have been added with another device file.
    [ 1767.505] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
    [ 1767.505] (II) No input driver specified, ignoring this device.
    [ 1767.505] (II) This device may have been added with another device file.
    [ 1774.230] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 1774.230] (II) NOUVEAU(0): NVLeaveVT is called.
    [ 1774.230] (II) NOUVEAU(G0): NVLeaveVT is called.
    [ 1779.499] (II) evdev: PS/2 Generic Mouse: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) evdev: Logitech USB Optical Mouse: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) evdev: DELL Dell USB Entry Keyboard: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) evdev: Power Button: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) evdev: Power Button: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) NOUVEAU(G0): NVLeaveVT is called.
    [ 1780.500] Error dropping master: -22(Invalid argument)
    [ 1780.501] (II) NOUVEAU(G0): Closed GPU channel 0
    [ 1780.503] (II) NOUVEAU(0): Closed GPU channel 0
    [ 1780.503] (EE) Server terminated successfully (0). Closing log file.
    Thanks for any help!

    I have  a similar issue except with two ATI cards and four monitors.
    I have a working xorg.conf that uses Xinerama and all 4 work but have been trying to get xrandr to work since xinerama is deprecated supposedly.
    I would like to switch to xrandr but there is some kind of magic voodoo I have with my current xorg.conf that doesn't even work on an exact same machine and cards that I tried to setup for a co-worker.
    lspci:
    01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV610 [Radeon HD 2400 PRO/XT]
    04:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV610 [Radeon HD 2400 PRO/XT]
    My xorg.conf:
    Section "Device"
    Identifier "ATI0"
    Driver "radeon"
    BusID "PCI:1:0:0"
    Option "ZaphodHeads" "DVI-0"
    Screen 0
    EndSection
    Section "Device"
    Identifier "ATI1"
    Driver "radeon"
    BusID "PCI:1:0:0"
    Option "ZaphodHeads" "DVI-1"
    Screen 1
    EndSection
    Section "Device"
    Identifier "ATI2"
    Driver "radeon"
    BusID "PCI:4:0:0"
    Option "ZaphodHeads" "DVI-2"
    Screen 0
    EndSection
    Section "Device"
    Identifier "ATI3"
    Driver "radeon"
    BusID "PCI:4:0:0"
    Option "ZaphodHeads" "DVI-3"
    Screen 1
    EndSection
    Section "Monitor"
    Identifier "DVI-0"
    Option "Primary" "On"
    Option "DPMS" "true"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "60"
    EndSection
    Section "Monitor"
    Identifier "DVI-1"
    Option "DPMS" "true"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "60"
    EndSection
    Section "Monitor"
    Identifier "DVI-2"
    Option "DPMS" "true"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "60"
    EndSection
    Section "Monitor"
    Identifier "DVI-3"
    Option "DPMS" "true"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "60"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "ATI0"
    Monitor "DVI-0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1920x1080"
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "ATI1"
    Monitor "DVI-1"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1920x1080"
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen2"
    Device "ATI2"
    Monitor "DVI-2"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1920x1080"
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen3"
    Device "ATI3"
    Monitor "DVI-3"
    DefaultDepth 24
    Subsection "Display"
    Depth 24
    Modes "1920x1080"
    EndSubSection
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "ServerLayout"
    Identifier "Default Layout"
    Screen "Screen0" 0 0
    Screen "Screen1" RightOf "Screen0"
    Screen "Screen2" Above "Screen1"
    Screen "Screen3" Above "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    Option "Xinerama" "1"
    EndSection
    My Xorg.0.log shows all the DVI connections when I don't use a xorg.conf file but only two are "connected"
    I see DVI-0 and DVI-1 connected and in "xrandr -q" but in Xorg.0.log I see DVI-1-2 and DVI-1-3.
    xrandr --listproviders show the two cards as well.
    Tried "xrandr --setprovideroutputsource 1 0" and they show up in KDE but as clones and then X crashes eventually.
    "xrandr --setprovideroutputsource 0 1" just plain crashes X

  • Using 3 Monitors...

    Hi Folks,
    I'm trying to switch from FCP to the new iMovie pro (aka FCP X).
    I'm running a 12core MacPro with a Radeon HD 5770.
    As you know this card has 3 outputs. 2 Mini DP, 1 DVI.
    There are 2 23" Cinema Displays in 1920x1200 and
    one 46" LG TV in 1920x1080 hooked to that card.
    Is there any f**ing way to make iMovie Pro to use the
    46" LG as a second monitor? I haven't found any. The
    only way is to unplug one of the 23" displays and work
    only with two monitors.
    Please help - I'm going nuts!!!!

    I know that.
    But how can I tell iMovie Pro which monitor it shall us?
    If I can tell the program to use 1 23" and 1 46" I'm fine.
    But that is something I can't get working!

  • How can i use two monitors in my application?

    Hello,
    Background
    I have a dual monitor card and two monitors which I want to use in my LabView application. The application gathers data from a complex sensor and calculates a number of results which need to be displayed graphically, this happens every 10 seconds or so. There is an awful lot of graphs which may be needed to be seen at some time but not routinely. The idea is that one monitor will display all the standard routinely displayed things and will not have any user input whilst the second monitor will display a tab control which has all the other graphs pickable.
    Question
    What I want to know is how I can programmatically tell labVIEW to put one vi up in one monitor and another vi in the other. I would then have them both maximised (which I know how to do). I would rather have the monitors set up as individual and that way I could keep the windows control bar on one monitor only. Thus one monitor would be a true user interface and the other simply a display.
    Basically how do I tell LabVIEW to use one monitor for a specific vi and not the other.
    The card I have is a matrox p650. Any comments would be appreciated.
    Regards
    Kevin

    Hallo,
    with new version of LV its more easy, but it also hasn't any troubles with LabVIEW 6.x or 7.x.
    Especially with Matrox P650 you will get no any problems (we using
    exactly this card together with G550 and our application supported
    three monitors at the same time.).
    I recommend to you following sequence:
    - After installing driver turn on option for supporting different
    resoluton on different monitors. As result you will get two absolutely
    separate monitors.
    - In Windows define which one is primary and which one is secondary.
    (On primary monitor located taskbar and all messages dialog boxes will
    appear.).
    - Arrange secondary monitor in display properties - where he located (left from primary, or right)
    - In your VI (which must appear on second monitor) use
    FrontPanel.PanelBounds Property Node for positioning. You must set four
    values for two corners. Easiest way to found right values is following:
    read this property node in while loop and put indicator on front panel.
    Then run VI, drag front panel onto second monitor and resize if
    necessary, and then you will see right values for PanelBounds. You can
    write this property node programmatically in run-time too.
    hope it help,
    good luck.

  • I cracked my screen. I want to use other monitor which I had one. I bought Apple Mini-DP to VGA adapter. It worked. It means I can see ADDITIONAL screen. However I want to use this monitor for the main screen. How can I do?? Please help.

    I cracked my screen. I want to use other monitor which I had one. I bought an Apple Mini-DP to VGA adapter. It worked. It means I can see ADDITIONAL screen. However I want to use this monitor for the main screen. How can I do?? Please help.

    You have the display set in Extended Desktop mode. The Menu Bar and Dock will be on the MacBook display and your background screen on the monitor. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the monitor and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse.  http://support.apple.com/kb/HT3131 When you disconnect from the monitor your Menu Bar will automatically change back to the MacBook.

  • Wanting to use multiple monitors on HP hpe210Y w-DVI-I and HDMI. Audio: 5.1 Surround

    I have a HP Elite hpe210y with only two outputs of which are: 1) DVI-I and 2) HDMI. My  situation is that I have 2 new HP Monitors with VGA Cables. I have an adapter for DVI-I to VGA and also VGA to Dual VGA. I do NOT want the monitors to work as Duplicates however. I want the second monitor to be an extension. I am also interested in getting even 2 more monitors in teh near future for a total of 4.
    Is there some way I can get two monitors to work off one DVI-I ?
    Will I be able to upgrade to up to 4 monitors? 
    Is there a part I need?
    Wanted to mention that my OS is Win7 Home Premium 64 bit. I use IE9, Chrome and Firefox
    I would of never bought this from Best Buy if I had known in advance that there was just the one regular output. I see they have one called a Phoenix which I may look into.
    Thank you in advance for your time and consideration.

    >Is there some way I can get two monitors to work off one DVI-I ?
    I've not yet seen a solution for that.
    You can use a hdmi2vga adapter for the second port.
    >Will I be able to upgrade to up to 4 monitors?
    >Is there a part I need?
    you can try one of these:
    http://www.evga.com/products/pdf/100-U2-UV19-TR.pdf
    http://www.amazon.com/Kensington-Universal-Multi-Display-Adapter-Black/dp/B002F9NSMQ/ref=pd_cp_e_1
    http://aluratek.com/usb-2-0-high-resolution-vga-adapter
    They will use your current graphics device.
    If you are looking for a new solution - I've read about DisplayPort version 1.2 that can do 'daisy-chain connection' with multiple monitors. But this you have to 'google' yourself.
    HTH
    V.
    *** Say 'Thanks' with Kudos ***

  • I can't use dual monitors since upgrading to Lion

    I use my HD TV as a second monitor for streaming movies etc.  Since upgrading to Lion, I can only use one monitor at a time.  Is anyone else having this problem?
    Thanks

    Yes, the blanking of secondary monitors is an issue.
    In fact, it is the reason why I went back to Snow Leopard on my 3-screen iMac
    I encourage you to contact Apple with feedback
    I have taken the following actions:-
    Provided feedback to Apple viahttp://www.apple.com/feedback/aperture.html
    Provided feedback to Apple viahttp://www.apple.com/feedback/macosx.html
    Submitted a bug/enhancement request via my free Apple Developer account
    Written to pretty much every mainstream Mac publication
    Encouraged every poster, like yourself, to raise this with Apple in your own words
    Next week, I will call Apple Support under the AppleCare agreement for my iMac
    Please give them feedback, and we might get this silly design decision changed.

Maybe you are looking for

  • Animated .gif file correction and image ready help.

    Hi, I have an animated gif created in an early verison of Image Ready & Photoshop. I need to make some changes. I have two problems. A: Can't figure how to do it in the current version of Photoshop. B: Open in the old image ready version, can't find

  • Using my c drive memory too quickly

    My satellite a505-s6965 has went from 454 gb t 300 in 1 month. i believe it to be some back files or application data. but i am not that computer savvy. i have only installed a cad program and itunes. at this rate my computer will be full very soon.

  • HT1473 I get a message the songs are in wma format and iTunes will convert them to AAC format - do I select Convert or Skip?

    I get a message the songs are in wma format and iTunes will convert them to AAC format - do I select Convert or Skip. I ripped new CDs I bought using Windows Media Player and they are saved on my C drive. I have done this before but cannot do it now.

  • Does GROUP BY force oracle go for sorting?

    Version : 10.2 I usually rewrite all queries with DISTINCT clause to GROUP BY to avoid sorting in the temporary tablespace. But, doesn't GROUP BY queries go for sorting?

  • How to properly set bind variables

    Dear All, I am currently confused about how to properly set my Bind Variables I have this view using HR standard schema Select * from Employees where EMPLOYEE_ID = :EMP_IDI somehow see three options on how to use this bind variable in an application