Using a network adapter multiple times problem

<Microsoft Network Adapter Multiplexor Driver(Team 1) is either part of more than one virual switch or added twice as part of a single team .Make sure the physica l network adapter is used only once > this is the problem that
is shown me
and still i cant able to identify the problem..
here is the hint of my digrram
3 host
each host: 2Nic + teamed + trunked(Team1)
(Virtual switch) for VM   and Connected to Logical Network
                Microsoft Network Adaptr Multiplexor driver (which is teamed of the 2Nic) conneted to Logical Network
                 1Nic for iscsi trunked
                 1Nic for iscsi trunked
So the problem is occur while am trying to create New Virtual switch thinking to create Connectivity between my host and Correct me in this point also.. i am in of need serious help of regarding steps of my progress..
thank u
alex

Hi Alex,
If you are using a standard virtual switch in SCVMM, then you should only need to add the multiplexor adapter to the virtual switch, do not add the physical adapters.
If you are using a logical switch then since VMM will create the team, its important that you do not team the two physical adapters in advance, instead you just add the two unteamed physical adapters directly to the logical switch and VMM will team
them automatically according to the settings specified in the port profile.
For the above to work you need to make sure the logical switch (in my case "Datacenter Switch") has the uplink mode set to "Team". The uplink port profile will also need to contain the desired teaming mode and load balancing algorithm.
Greg
Greg Cusanza [MSFT] --Posting is provided "AS IS" with no warranties, and confers no rights.

Similar Messages

Multiple networks using single network adapter

Hi,
If I have only single network adapter in a OVM server (or single bond interface bond0 created from two network adapters), is it possible to separate networks for
VM management, live migrate and VM public networks using any mechanism, say by creating VLANs? I am having two 10G adapters in each of the VM server
and would like to separate traffic of each of these networks. Thanks in advance.

Hi,
10G adapter is the best NIC performance so with two NICs like this, i recommand you to use the bond0 (mode 1) for fault tolerance and use the VLAN technology to separate the Networks.
Note that Oracle VM support the VLAN configuration.
I hope this can help you
Best Regards

How to use same dynamic text, multiple times in a Movie

FLASH CS5.5
How can a dynamic text field be used multiple times, on any
frame, in any new layer during a Movie?
~~
A number of unique dynamic text fields are being used.
The intent is to use them each, many times during a Movie.
(i.e. a users first name)
They are successfully being "ExternalInterfaced" from a PDF form field.
(the SWF is displayed within the PDF as a RMA)
This all works well, IF I only use one instance of the dynamic text field.
(one use of each unique text field)
If I try and use that same dynamic text field, again, in a new layer, later in the SWF,
all of that said, duplicate dynamic text fields do not display.
~~
Stumped!!!
Thanks in advance for your advice / comments!
D-

Thanks Ned,
I always welcome learning something new.
I did not know creating a new keyframe,
creates a new instance.
Yes, I had used the same dynamic text field instance name in
numerous, new layers (great observation).
With the objective to display the User's name throughout
the timeline (on and off)...
I'll attempt to paraphrase your solution;
Use a single layer to display the dynamic text field.
Extend this layer's timeline throughout the movie, or end use of the dynamic text field.
Help with this one ??
Set the visible properties to true or false as need through out the timeline.
( Does require an AS3 ? )
I'll give that a try.....
~~
Side of effect of using the above solution;
The SWF in it's attempted state, uses the dynamic text field instance, in
different places, different text sizes, on the stage, throughout the Movie.
(i.e. the User's first name appears in different sentences...)
Per the solution above,
I believe I will be limited to One location, one format setting.
Is this assumption correct?
I can make this work from a display / Movie point of view.
However, your first VAR concept, noted above, might be
worth exploring should more flexibility be required.
Thanks for making the time to coach...
D-

Use a sequence template multiple times in same project

I have created a lower-third animated title and saved it as a sequence as it has sound. What I'm confused about it how I import that sequence and use it multiple times in the same project and change the content of the title for each sequence. If I import the sequence and change the title in one instance, it changes the title of all instances. I would like to use the sequence and be able to change each title. I have even tried copying sequences and renaming them but any editing still seems to affect the parent sequence file.
I know this must be really simple but I'm going round in circles here. Any pointers appreciated.

Take a look at this thread:
style sheets for titles?
I'm not sure if an AFX Live text will bring over the audio, it is not something I have tried.

Can I attach a link to one image and then use that linked image multiple times in my site?

Hi,
Is it possible to attach a link to an image and then use that image (with link attached) multiple times in my site.
Thanks,
Ally

Use 'Find and Replace'>under the 'Edit' menu.
Select from 'Find in'- Folder and browse to the folder your website files are kept in to select it.
Search: Source Code
In the Find box (but obviously use YOUR image code):
<img src="images/imageName.jpg" width="200" height="200" alt="" />
In the Replace box: (use YOUR link and image code)
<a href="yourLink.html"><img src="images/imageName.jpg" width="200" height="200" alt="" /></a>
Then select 'Replace All'

Using USB Network Adapter

I got a blu-ray player for Christmas, and it has a USB port. Can I use Qwest - Wireless-N USB 2.0 Network Adapter to connect to my wireless network set up with an Airport Extreme? Thanks!

Katherine Schmidt wrote:
I got a blu-ray player for Christmas, and it has a USB port. Can I use Qwest - Wireless-N USB 2.0 Network Adapter to connect to my wireless network set up with an Airport Extreme?
If your blu-ray player's USB port supports a Wi-Fi adapter, I'd guess it would work. You should check for that compatibility with the blu-ray vendor.

Using same bind variable multiple times in Dynamic sql

Hi;
I have a query which uses same variable multiple times, is there a way I could use only one time that variable and it will take multiple times.
Query is;
execute immediate 'SELECT count(*) FROM x WHERE MONTH_ID = :VOMNTH_ID
UNION
SELECT count(*) FROM Y WHERE MONTH_ID = :VOMNTH_ID
union
SELECT count(*) FROM z WHERE MONTH_ID = :VOMNTH_ID ' using month1,month1,month1
What I want Just supply month1 only once.
Your help is appreciated.
VKM

the way suggested by Nigel worksI'm not sure what you intend to use the resultset for but remember that UNION will remove duplicates from the result set and could possibly sort it too. Even if that were not the case (for example if you used UNION ALL) Oracle does not specifically guarantee the order of resultsets.
If you are expecting the first row to contain the first count (and so on) then you might not get the answer you are expecting.
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
SQL> SELECT 3 n
2 FROM   dual
3 UNION
4 SELECT 2 n
5 FROM   dual
6 UNION
7 SELECT 1 n
8 FROM   dual;
         N
         1
         2
         3
SQL> SELECT 1 n
2 FROM   dual
3 UNION
4 SELECT 2 n
5 FROM   dual
6 UNION
7 SELECT 2 n
8 FROM   dual;
         N
         1
         2
SQL>

My iphone 5s won't connect to wifi, i've reset the network setting multiple times and it's still now working.

When I got back from vacation my iPhone stopped to connecting to my home Wi-Fi, also it won't connect to any other Wi-Fi. It will not notify me when I have available networks to connect to. I've reset the network setting countless times and still nothing is working.

Try restoring your phone, first from a backup & then as a new phone.
If you still have issues after restoring as new, the phone has a hardware issue and needs to be replaced. You'll have to bring it to an Apple store to be evaluated.
~Lyssa

Design Time Bean Customizer validate Rule and use multiple time problem

Hi,
I have implement a custom validation rule ,add a design time bean customizer for my rule then register on datamodel project,i can use the graphic design time bean customizer and add my validate rule to my entity xml file,but when i add another instance to the same entity,data added to entity xml file was not correct,it may be not integrity or all data are same ,how can i do ? I found all bean validation with the same name ,it is the registered rule name "plsql rule", any suggestion are appreciative
thank you advance
li xin zhu 2007/09/08

Hi,
One thing you can do in the FOX would be to mark all fields in 'to be changed'. This will have the impact of having all data in the same data package and the FOX code will execute only once.

Namedquery using same table field multiple times with the use of a label

Hi all,
i'm having some trouble with a namedquery. I'm trying to
use the following namedquery in Toplink to retrive some
data out of a database.
select proj.id
, proj.code
, proj.name
, proj.budget
, proj.status
, proj.startdate
, proj.enddate
, proj.mdr_id projleader_id
, med_leader.name projleader
, proj.mdr_id_valt_onder promanager_id
, med_promanager.name promanager
, proj.mdr_id_is_account_from accmanager_id
, med_accmanager.name accmanager
from uur_projecten proj
, uur_medewerkers med_leader
, uur_medewerkers med_promanager
, uur_medewerkers med_accmanager
where ( #p_name is not null or #p_search_string is not null )
and med_leader.id = proj.mdr_id
and ( proj.mdr_id = nvl( #p_name, proj.mdr_id )
or proj.mdr_id_valt_onder = nvl( #p_name, proj.mdr_id )
or proj.mdr_id_is_account_van = nvl( #p_name, proj.mdr_id ))
and (( #p_status is not null
and substr( proj.status, 1, 1 ) = upper( #p_status ))
or ( #p_status is null ))
and ( upper( proj.code ) like upper( '%' || #p_search_string || '%' )
or upper( proj.name ) like upper( '%' || #p_search_string || '%' ))
and med_promanager.id = proj.mdr_id_valt_onder
and med_accmanager.id = proj.mdr_id_is_account_van
order by decode( substr( proj.status, 1, 1 )
, 'A', 2, 'T', 3, 'F', 4, 1 ), proj.code desc
As you all can see the table ‘uur_medewerkers’ is been used trice to
determine the name for the corresponding ID. I have a Java class with
the fields for the results and created a Toplink descriptor to map
the fields to the database fields.
The problem is that for the 'projleader', 'promanager' and 'accmanager'
fields the results are null. The reason is probably that Toplink doesn't
recognize the fields because of the label for the tables.
Is there a way to make this work?
Greets, René

Post Author: quafto
CA Forum: .NET
Your query is not too clear so I'll do my best to answer it broadly.
You mentioned that you have a .NET web application where your users enter data on one screen and then may retrieve it on another. If the data is written in real time to a database then you can create a standard Crystal Report by adding multiple tables. The tables should be linked together using the primary and foreign keys in order to optimize the database query and give you a speedy report. Using unlinked tables is not recommended and requires the report engine to index the tables (it is quite slow).
You also mentioned you have a "PropID" to be used in a WHERE clause. This is a great place to use a parameter in your report. This parameter can then be used in your record selection formula inside Crystal Reports. The report engine will actually create the WHERE clause for you based on the parameter value. This is helpful because it allows you to simply concentrate on your code rather than keeping track of SQL queries.
Now, what Crystal does not do well with is uncertainty. When you design a report with X number of tables the report engine expects X number of tables to be available at processing time. You should not surprise the print engine with more or less tables because you could end up with processing errors or incorrect data. You may need to design multiple reports for specific circumstances.
Regarding the group expert question. I'm not sure how you would/could use the group expert to group a table? A table is a collection of fields and cannot be compared to another table without a complex algorithm. The group expert is used to group and sort records based on a field in the report. Have a look at the group expert section of the help file for more information.
Hopefully my comments have given you a few ideas.

Can I use the "same" button multiple times for multiple galleries?

OK so I am extremely untrained in CS4 and Actionscript. However I have managed to get along fairly well until I started to dynamically upload images as a gallery. This works great if I have one gallery, but for my site I have 9 galleries!!! I have a back and next button, but I want to be able to use those same buttons for all of the galleries so they look the same. I have split them up and renamed them, but I am clueless on how to script the buttons to work. Please help...and don't laugh at my poor scripting. This is what I have now because I do not know where to put the other button names without getting errors.
stop();
next_btn .addEventListener(MouseEvent.CLICK, nextImage);
var imageNumber: Number=1;
function checkNumber(): void{
    next_btn.visible=true;
    back_btn.visible=true;
    if(imageNumber==15){
        trace(imageNumber);
    next_btn.visible=false;
    if(imageNumber==1){
        trace(imageNumber);
    back_btn.visible=false;
function nextImage(evtObj:MouseEvent):void {
    imageNumber++;
    mc_engagement.source= "photo/engagement/en0"+imageNumber+".jpg";
    mc_amish.source= "photo/amish/Amish"+imageNumber+".jpg";
    mc_chicago.source= "photo/chicago/ch"+imageNumber+".jpg";
    mc_landscapes.source= "photo/landscapes/land"+imageNumber+".jpg";
    mc_goodvsevil.source= "photo/goodvsevil/ge"+imageNumber+".png";
    mc_animals.source= "design/animals/an"+imageNumber+".png";
    mc_icons.source= "design/icons/icon0"+imageNumber+".png";
    mc_objects.source= "design/objects/pc"+imageNumber+".png";
    mc_typography.source= "design/typography/type"+imageNumber+".png";
    checkNumber();
back_btn .addEventListener(MouseEvent.CLICK, backImage);
function backImage(evtObj:MouseEvent):void {
    imageNumber--;
    mc_engagement.source= "photo/engagement/en0"+imageNumber+".jpg";
    mc_amish.source= "photo/amish/Amish"+imageNumber+".jpg";
    mc_chicago.source= "photo/chicago/ch"+imageNumber+".jpg";
    mc_landscapes.source= "photo/landscapes/land"+imageNumber+".jpg";
    mc_goodvsevil.source= "photo/goodvsevil/ge"+imageNumber+".png";
    mc_animals.source= "design/animals/an"+imageNumber+".png";
    mc_icons.source= "design/icons/icon0"+imageNumber+".png";
    mc_objects.source= "design/objects/pc"+imageNumber+".png";
    mc_typography.source= "design/typography/type"+imageNumber+".png";
    checkNumber();

I'm still a novice with Flash myself, but I have two comments.
First, at this point, won't your buttons control all galleries at the same time? Which means, if I go to image 5 in one gallery, then move to another gallery, I'll start at image 5, because the actions are all connected.
Second, you can definitely use the same buttons for multiple galleries. It seems to me that as long as you've assigned the buttons an instance name, these actions should already work to control all the galleries (see the note above). I guess I would need to understand a bit more about how your project is built.

Unable to remove Logical Network. Multiple dependancy problem.

Hi,
I am having problems removing tyring to remove a Logical Network from one of my hosts.
It is saying that I have multiple dependencies, and that I need to amend them before I can remove the Logical Network.
(The problem is that I can't amend any of the dependencies and I am going around in cirlces)
The depdencies are of the Logial Network are :
The host machine.
Uplink port profile
Site
What can I do?
Thanks

Hi Sir,
Sorry for the delay .
You may need to remove the link of logical network from the list :
Host , please check the properties of the HOST's logical network connectivity :
Site , please check network sites and remove it :
Best Regards,
Elton JI
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

How do I use the same track multiple times in different playlists? I want to rename it multiple times.

Hi, I am an entertainer that want rename a track a music a number of different ways so it will come up in playlist that work alphabeticly.
for instance:
Good Song I want to change to:
A Good Song
B Good Song
C Good Song
D Good Song
So I can place them in different playlist and keep the order straight.
Todd

You can't give a single track multiple sets of properties, but if you want four copies of a song with different metadata then find the original and copy/paste it three times into the Automatically Add to iTunes folder, then edit the properties of each in turn.
tt2

How can we use a pdf form multiple times for different people (students)?

Our school created a pdf form of our report card but we are not able to "save as" the forms for use by multiple teachers for multiple students. Please advise.

Just use Adobe Reader XI. Adobe Reader XI allows for forms data saving but it does NOT allow for locking down that data.

Using ISP network with multiple private spans in a bridged/LAN manner?

Dear all - this is a bit a of concept question. But it seems an obvious and generic requirement - but I can't find a nice, neat and simple solution? Or maybe I can't see the forest for the trees? Help/pointers would be appreciated - the first bit is the connectivity, I'll worry about the security issues once this has been put to bed.
I need a WAN/LAN network with 30 plus nodes. My IPS will supply a nice fibre internet connection per node with fixed public IP's, each node has a /28 span (5 usable Public IPs) - so I have the foundation for an 'any to any' network (which I need) via these public IPs. I now need to expand the IP host connectivity behind the ISP supplied CPE. This expansions needs to be a set of private networks (say) 192.168.x.0/24 - with x being 1 to 30. - But I still need the 'any to any' connectivity.
A (rather poor) ascii picture of what I need:
' | Internet |
192.168.1.100/24 <---->ISP CPE/28 <-------> | |
192.168.2.100/24 <---->ISP CPE/28 <-------> | |
Etc up 'till 192.168.30.100/24 | |
|_________________|
The Internet becomes no more than a 30 port switch - with any 192.168.x.y being able to ping any other 192.168.x.y node
Any takers?

Hello,
Just to make sure I have it correctly, you have several sites each with their own public addresses, which then have a private address range network behind them, and they need to all be able to communicate?
If so the solution would be site-to-site VPN tunnels. That way each client could communicate with every other client using the private addresses, and all of the traffic going out over the ISPs public network would be encrypted. This would involve a lot of tunnels so you would need a pretty beefy router, but that should give you what you are looking for.
Hope I understood it correctly and this helps,
Christopher Ebert - Advanced Network Support Engineer
Cisco Small Business Support Center
*please rate helpful posts*

Using a network adapter multiple times problem

Similar Messages

Maybe you are looking for