Using a PPC backup for an intel based iMac

I used my external hard drive with my PowerBook TM backup to migrate my data to my new intel based iMac. Afterwards I formated the external hard drive to the GUID scheme and initialed a TM backup. But somehow in the midway TM stopped backing up and produced this error message:
+Starting standard backup+
+Backing up to: /Volumes/Backup/Backups.backupdb+
+Event store UUIDs don't match for volume: Macintosh HD+
+Event store UUIDs don't match for volume: Medien+
+No pre-backup thinning needed: 71.14 GB requested (including padding), 285.93 GB available+
Is it not possible to use a PPC based TM backup to restore it on an intel based machine?

Well, that's not what the error means. There's a problem with the UUIDs of the volumes involved. However, that said, no you cannot put a PPC version of OS X on an Intel Mac. However, you can restore your data from any TM backup. But if you did a full system restore from your PPC system backup to the new machine, then you have a problem for which the only solution is to erase the internal drive and reinstall OS X using the original discs that came with the new computer.
I'm not really sure what you are trying to do, but if you actually formatted the external drive and re-partitioned it using GUID and are now trying to initiate a TM backup of your new Intel Mac, then I recommend you simply reformat the external backup drive Mac OS Extended, Journaled (and check to be sure the drive is partitioned as GUID,) and then reconfigure TM preferences and start a new backup.

Similar Messages

What is the minimum requirements for my Intel based iMac to upgrade to Snow Leopard (and beyond)?

I am starting from scratch with my iMac (after a crash and unworkable back-up):
Model Name: iMac
Model Identifier: iMac8,1
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: IM81.00C1.B00
SMC Version (system): 1.30f1
So I installed 10.5.8, now I want to upgrade to Snow Leopard (10.6). Is this not possible? I did this before but the install CD give the message that it is not possible. Do I forget something?
Any help is welcome,
Victor

Your computer meets all the requirements, but you need to use a retail DVD to upgrade. A different Mac model's original disks won't work.
(110815)

Older printer set ups on Intel-based iMac

I just bought a new iMac with Intel inside running OS 10.4.4 and I bought a new AsanteTalk adapter. I have tried to hook up an Apple Laserwriter 12/640 PS as well as an Epson Stylus Color 800. The drivers are in the iMac, but I can't get the machine to see either printer using AppleTalk through a direct Ethernet connection or through an Ethernet hub. Is this a new problem because of the Intel-based iMac? Has anyone tried using older printers with the new Intel-based iMac?

.

Convert an iMac G5 PPC to Intel Based iMac early 2006?

I have been working with Macs for some time and I know how annoying their hardware will only work for one series of computers and that's it. I was given an iMac G5 2004 for free and when looking to replace the motherboard I realized that it only uses DDR memory, terrible. I know they have 17" Intel based iMac G4 computers and figured with an iMac there are few parts you need to worry about. I would need to change out the LCD screen or connector and rewire it, I have hard drives that will work, I will need an Intel Core Duo processor (can pick a working one up real cheap), Motherboard will cost me $100, and I assume the DVD/CD drive is universal and will work with the Intel board. Now my concern is the power supply and the LCD inverter. That is pretty much all there is to these machines.
Now why don't I just buy a 2006 iMac? Because where is the challenge in that? Has anyone ever attempted this conversion? Money is not a problem, I enjoy moding and having little projects like this. I have a flat screen eMac with an LED LCD screen, I have a G4 with Mac Mini guts, I have a Gen 1 Apple TV running 10.5... you get the idea. I am tearing the machine apart now I just need to find the proper information, Google has failed me. I assume the 2006 MOBO should be a direct fit because the form factor is almost identical. USB and other slots look to be the same, if not I can bust out the plastic fill and Dremel. Anyone have any thoughts besides that this is a dumb idea?
If I go ahead with this I plan on doing a write-up. In theory, these seems like a very simple conversion just because everything is based around the MOBO and the parts that would need to be replaced I have or are inexpensive. I figure the project would cost me around $300. I run a tech shop and get parts dirt cheap. Any ideas or information would be great as I typically don't work on 2004 models, thanks!
Please no flaming, if you intend to flame just go bother someone else thanks!

You also have to consider to port locations, and if the ventilation is enough for the logicboard.
Furthermore a Mac mini uses a SATA bus that is more geared towards powering 2.5" drives, not 3.5" drives. Though I've seen some who hacked an eSATA on a Mac Mini on the net. Don't forget a CoreSolo or CoreDuo Mac Mini won't give you much of an advantage over the G5. Core2Duo 2.2 Ghz or higher is better unless you still depend on numerous non-Universal applications.

Windows drivers for Intel-based iMac

Hi,
I have installed Windows XP Home on my new Intel-based iMac. Windows and Windows-based applications run fine, but there seem to be missing drivers that prevent the computer from connecting to the internet when it is running Windows (we have a DSL cable modem); audio drivers are missing, too. Where, and how, can I download and install these missing drivers? Thanks for any advice or hints!

You didn't say if Windows XP was installed in Boot Camp or Parallels.
If it's in Boot Camp make sure you used the right one. There are two versions of Boot Camp, one for Windows XP and one for Windows Vista. You have to run the driver installation CD in Windows after Windows is installed in Boot Camp.
If you're using Parallels make sure that the Windows Tools are installed by changing the window to OS Window mode and running Install Tools from the Action menu in Parallels.

I am using iphoto 6.06 for my intel imac. I have been trying to print pictures from iphoto and i keep getting a message that states " the picture you are trying to print is in the iphoto library" what can i do to be able to print a photo from iphoto

I am using iphoto 6.06 for my intel imac. I have been trying to print pictures from iphoto and i keep getting a message that states " unreadable file: the following file could not be imported. the file is in the iphoto library folder" also when i try to print a picture from iphoto i get a message that says "no page was selected"
not sure what happened but i can pnly print when i drop the photo onto my desktop as an 8.5 x 11 size picture and i am trying to print 4x6's

Since the new library gives you the same message log into another user account on your Mac and see if you can run iPhoto without getting that message. If you get that message there also a reinstall of iPhoto seems indicated. To do so you'll have to delete the current application and all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder,
Click to view full size
Then install iPhoto from the disk it came on originally and apply all available updates to it.

I used migration assistant and my ethernet cable to move data and apps from my 5-yr old Intel-based iMac to my brand new Intel-based iMac running OS Lion. The old machine was running OS 10.5.8. Not all my files transferred (or I can't find them). Help

I used migration assistant and my ethernet cable to move data and apps from my 5-yr old Intel-based iMac to my brand new Intel-based iMac running OS Lion. The old machine was running OS 10.5.8. Not all my files transferred (or I can't find them). I've seen recommendations to select the old computer in System Preferences, but that didn't work. Help. Thanks!

IMO, wrong choice. Start over, using a FireWire cable and following the steps in Pondini's Setup New Mac guide.

Can iCloud be used as a backup for iBank data?

can iCloud be used as a backup for iBank data?

iBank isn't compatible with iCloud, but developers could add it to the Mac App Store version soon

I need to purchase a power cord for my intel based 27" iMac. I have had it for almost 2 years, I don't have apple care and I don't want to take it in to the genius bar. I know it's the power cord and I just want to purchase one.

I need to purchase a power cord for my intel based 27" iMac. I have had it for almost 2 years, I don't have apple care and I don't want to take it in to the genius bar. I know it's the power cord and I just want to purchase one.

iMacs take generic power cords. If it fits into the back of the iMac and an electrical socket, it'll work.
Good luck.
Dr. C.

Older Mac games on a an Intel-based iMac

Does anyone know if it is possible to play older (1995 and up) Mac games on a new, Intel-based iMac?

Seconded. Emulation is the only way to run Classic games on Intel Macs. Rosetta is the framework that allows Intel Macs to run PPC Mac programs (for OS X). Before the Intel switch, Mac's also used something called the "classic environment." This allowed OS X users to run OS 9-compatible applications in OS X, but this is impossible under OS X.
I don't have any experience with SheepShaver. I believe Q (which is Mac port of a emulator called QEMU) can emulate PPC environments (I know QEMU can; so I can only presume Q can). But as the previous poster mentioned, the only legal way to get the ROM images you need is by actually owning a PPC Mac.

Intel-based iMac stuck in grey screen with spinning wheel. SMC::smcReadKeyAction ERROR THOP kSMBadArgumentError(0x89)

Hi guys,
since yesterday my Intel-Based iMac doesn't boot normally, its stuck in grey screen with a spinning wheel.
Its an Intel-based iMac 21.5'' purchased in 2011, and i recently (2 months ago) upgraded it to Mavericks.
-2 weeks ago, i installed smcFanControl app
-Tried start up in Safe Mode by holding Shift but its not working. i think i hear fans are working more than they were before the problem occurs.
-entered Single User Mode and i get an error
SMC ::smcReadKeyAction ERROR THOP kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8029fa1000
-followed some instructions found online, but can execute the correct commands in SingleUserMode
tried to remove FanControl as explained here: http://apple.stackexchange.com/questions/110667/errorr-kernel-smcsmcreadkeyactio n-in-console
any ideas what may caused this and how can i fix this?
Thanks in advance

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, boot from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

What can happen to an intel-based iMac when a power outage occurs while it is on and I unplug it to avoid a surge when power comes back?

The power went out today, while I was using my intel-based iMac (2008) and I rushed to unplug the power from the wall, before the poser could surge back on. Did I do damage?
I have a surge protector that it was plugged into, but I thought just to be safe I should unplug!
Thanks, Group!
artdough

Good point!
Art a surge protector (a good one) is designed to provide contant power to the devices that are plugged into it. This is good in the event of a surge of power up or down however in the event of a complete power outage they're of no value.
A UPS (Uninteruptable Power Supply) is just that, it has surge protection like a surge suppresor however it also has a battery integrated into it. The battery is designed to provide enough power for a user to do an orderly shutdown. In addition most UPS's can also plug into your iMac via a USB cable. Then you can set energy saver preferences that you cannot see now. For example you can set how long the computer should run in the event of power going off. You can also set if you want the computer to reboot or not when the power comes back on etc. For about $100 you can get a fine UPS that will add an additional layer of protection for your computer and give you extra peace of mind.

User Contributed Tips in Intel-based iMac Your Intel-based iMac Display

*The following User Contributed Tips are located in the Intel-based iMac > Your Intel-based iMac Display forum:*
a brody - Using a second Mac as a display for a first
http://discussions.apple.com/thread.jspa?threadID=1587927
Publish date: July 7, 2008
*The following related tips are located in other areas of Apple Discussions:*
See also User Tips Library

My 20" 2.16 GHz Intel Core 2 Duo had become almost useless due to freezes and crashes- with NO crash reports in the logs.
They were often preceeded by video glitches, so I assumed it was a bad video card- unfortunately soldered to mother board.
Apparently, from forum postings, this is not an uncommon problem. The computer would run longer if the day was cooler, but rarely more than 10 minutes, so I suspected it was aggravated by heat.
Then I found this post from Bodomann on an Apple Support forum:
"Following up on my previous posting regarding my son's late model 2006 iMac that required a $900 logic board replacement:
Turns out the problem is apparently related to a bad CPU temp sensor. I installed 'iMac Fan Control' (Google it) which reported the CPU temp always at 32 degrees Fahrenheit (obviously incorrect). The same software allowed me to adjust the CPU fan manually. After multiple trials I set the CPU speed to 2800RPM after which the system would run forever - never freezing with the dreaded grey box 'reboot me' screen. I tried several times reverting the software to default speeds and the system would always crash within 10 minutes. "
I downloaded free Fan Control 1.2 for Imac from Derman Enterprises (they have an Intel iMac and a Mac Book/Pro version). It installs as a system preferences control panel. I cranked up all three fan speeds. The fans sped up noticeably. Horizontal lines have gone from screen (so far), no color artifacts and no crashes yet. I may have a real computer back! Hope Apple checks this out-
The control panel also gives the temps sensors are reporting at the CPU, hard drive and DVD drive. The CPU sensor reports the CPU temp as 32 degrees F- which is clearly wrong, unless Apple has been installing little refrigerators inside.
So thanks to Bodomann for posting- Hats off and three cheers to Derman and Cristoph for source code.
http://www.derman.com/iMac-Fan-Control
http://www.lobotomo.com/products/FanControl/index.html

My old Intel-Based iMac is no longer recognizing USB wired input devices; it only recognizes Bluetooth. What happened?

My friend's old Intel-Based iMac is no longer recognizing USB-wired input devices (Kensington TrackBall, Logitech Mouse) plugged into any USB slot at the back of the computer.
They were working before and for many years.
All of a sudden, A pop up window came up. IT said no Bluetooth mice could be found. We don't know what set off that window to pop up and look for a WL mouse. It never has before in the 5 or more years my friend has been using this computer.
I supplied a wireless Apple mouse and his is back running again.
But want to know why his USB-input devices (Except his keyboard) are not being recognized. He would prefer to use his Trackpad (Wired), but can't find anything in SYstem PReferences to allow that. The computer only seems to want a Bluetooth input device.
Anyone have an idea what happened and if this can be reversed?
I think he is still running Mac OS X 10.5.8.

Hi Carol, lets try this...
reset FW bus, same goes for USB reset...
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive/devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html

Photoshop 6.0 on Intel based iMac

Hi, I'm new to Macs and I just bought an old copy of photoshop 6.0. Just tried to install it on my Intel based iMac and it said that the application wasn't supported on my system. Is there any way around this or should I return the software and save for a later version? Been looking for advice on here but haven't had much luck. A lot of mention of something called Rosetta?
Help me please!!
iMac (intel) Mac OS X (10.4.8)

Return the software and get Photoshop CS or CS2 at the least. Otherwise you can wait till 07 to get the intel native CS3. I think it's coming out in the Second quarter.
Earlier versions of photoshop weren't native to OS X. We used to be able to get around that by a stopgap measure called "Classic" that actually booted OS 9 in a shell inside OS X. Since the move to intel, classic no longer works. That's why you need an OS X native version of Photoshop.

Using a PPC backup for an intel based iMac

Similar Messages

Maybe you are looking for