Using a pre-configured Hibernate SessionFactory

Is it possible for the HibernateCacheLoader/HibernateCacheStore to use a pre-configured SessionFactory? We use Hibernate's annotation based configuration and use Spring to build our SessionFactory for us.
It seems that the Coherence HibernateCacheLoader/HibernateCacheStore is hard wired to build the configuration from scratch.
Thanks

Hello,
With the current release of the product you are correct it is not possible.
This issue has been scheduled to be fixed in the next release of the product.
We hope to have that release out soon but we can not give any specific time lines of the release.
I hope this answers your questions.
-Dave

Similar Messages

Using the pre-configured SCCM 2012 SP1 endpoint protection templates for Exchange 2010?

I am looking to update the exclusions for SCCM Endpoint Protect clients performing server AV protection on Exchange 2010 nodes.
Within SC there are a number of pre-defined templates, including ones for Exchange 2007 / 2010. However when I analyse these they do not appear to list all the exclusions that the Exchange product team define on TechNet -
http://technet.microsoft.com/en-us/library/bb332342(v=exchg.141).aspx
So do I;
1 - Use the template as it has been verified by Microsoft for using with Exchange 2010 and it covers all I need to exclude?
2 - Edit the template, adding in the additional exclusions as defined by the Exchange product team?
Would whichever logic I use apply to other templates, such as SQL, SharePoint, etc as well?
Thank you
Alan

As I cut and pasted the xml file I noticed the following comment that I had missed before..........
        
        
        
Still going with adding the full recommended list from TechNet though

Pre-Configure QT 7 Installation for only specific file types

Is there an 'ini' or similar configuration file or command line option set I can use to pre-configure QT7 to only associate with specific file types?
I want to leave the associations for Media Player intact and have QT handle only MOV and other Apple-specific file types.

Basic answer. No.
You set file associations after the install of QuickTime.
Most of it's adjustments and options are found in its Control Panel. Here you can set associations for MIME types that control the browser plug-in.
Each user can set their own values.

Re: Pre-Configured Workflow Scenarios

Hi All,
I came to know through the SAP Documentation that some pre-configured Workflow scenarios are available in especially in IDES environment.
I'm looking for some pre-configured Workflow scenarios in ECC environment related to Item/Material/Product create. Please let me know where I can find more information on this and how to consume/use these pre-configured Workflow scenarios.
Thank you
Surender

David/Andy:
Really good points guys. I certainly am not saying Motion should be like AE. I am not starting a thread that is a comparison of the two. Each has it's own workflow, and Andy I think you bring up a really good point. I rarely use clones but they are a powerful tool in the right circumstance. I am curious about more complex design workflows and how some of us push the limits.
David, I agree with your point about keeping Motion simple. Apple is proficient at keeping their software/hardware simple. Software that serves one purpose, or devices that have only a few buttons. The elegance is what we all like.
Additionally, to your point Andy, we can do things withOUT precoming in Motion. Just keeping things in layers is good enough really. Like I said, I'm not really an AE user, but I do understand the concepts. I like the idea of a pre-rendered portion of the animation. Just seems to take the processor intensive portions out of creating complex animations. Moreover I think I am just wondering if I could create more complex animations WITH some of the design workflows that AE offers (like pre-rendering).
At the end of the day I feel like I can do SO much with Motion, and have wiggle room to play around more. I'm definitely excited about a new version of Motion, and to see what sort of new features make it in. Perhaps nodal workflows, perhaps more 3D design tools... we'll see.

How to configur hibernate in NetWeaver and how to use in NETWEAVER

Hi,
Now i am useing Ejb's for my application in NetWeaver .
Can i use hibernate instead of Ejb's in NetWeaver.
if Ok,please tell me the procedure for how to configur hibernate and how to use.
Thanqqqqqqq
Guru

You should read this documents first:
Using Hibernate on SAP WAS - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2ae0614a-0601-0010-a491-a9a635f06613
Hibernate on SAP NetWeaver - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/14f55178-0801-0010-0bac-974ed17e51d3
and then considering integration of your app with DAO design pattern proposed by Spring Framework. More on this is available here:
Spring Integration on SAP NetWeaver - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/73af6078-0801-0010-8fa1-deaa9647c5dd
and here: http://static.springframework.org/spring/docs/1.2.x/reference/orm.html#orm-hibernate
Regards,
Marcin Zduniak

Best Practices using Pre-configurator

Hi
Anybody aware of doing QM configuration as per the Best Practices through Pre-configurator.

Hi
By using sap library you can configure the QM module . Basically you have to know the process of Quality Managment
Regards
M B raju

CS4 Suite (all Windows versions) - documentation of XML and pre-configuration of components?

With a view to packaging and deploying CS4 in Microsoft enterprise environments (ie GPO restricted desktops, mandatory user profiles, non-administrative user base, at or near minimum spec hardware) I was wondering if anyone was aware of any documentation, official or otherwise, for pre-configuration or omission of individual components within the CS4 suite in order to more specifically tailor their operation to user requirements. Eg, such as the way Adobe provide a transform generator/editor for Acrobat in its standalone form.
The instructions for performing silent installs with or without the more major components (such as Dreamweaver, Photoshop etc) work fine, and the Adobe CS4 Deployment Toolkit (aka AdobeUberInstaller) deals with a number of omissions in the base installer such ELUA and updates suppression. However there are various options within the applications themselves I would like to change the defaults for at install time (eg suppress Adobe Bridge from prompting to run at startup, address Acrobat's refusal to run until another element of the suite has been run first etc), patches I would like to slipstream rather than apply retrospectively (currently Air, Indesign, Photoshop), and some elements (such as foreign language components and 64bit support) I would ideally like to omit from the source package altogether to keep the size down - 6GB+ to 500 clients is quite an ordeal!
Web resources such as application deployment forums have allowed me to address some of the above, but I would be very interested in the feedback/experiences of this community. I appreciate what I'm asking is somewhat vague but any crumbs of wisdom all add up...
Many thanks in advance for any suggestions.
Bill

The best is to get the versions in which you have developed/tested. These can be found in MAX under Software, if it is possible provide a link to the NI ftp download URL.
Then export the settings in MAX (for tasks/scales) if you use them and provide a simple app that loads these items into MAX.
For RIO I'm not totally sure but I would create 'Getting started' that outlines what settings (IP/DNS etc.) to get the user started.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

How Can I pre-configure the proxy settings in Acrobat 8?

We use a proxy server to authenticate users and it's causing a problem for our e-licensing. Is there a place to pre-configure the proxy settings / login and password for the e-licensing to happen quietly so our users don't have to see it?

Have you searched the forum for proxy? I do not have an answer, but this has been discussed before. I am not sure there is an answer in the discussions, but it is worth a try. There is likely a knowledgebase article on the issue also. Good luck.

How can I install a Designer 6.0 pre-configured repository ?

Hi:
I am trying to install Oracle Designer 6.0 to my client machine (Windows 2000) and server machine (Windows NT 4.0), what I did was:
[1]install Designer 6.0 client side on my client machine.
[2]install Oracle 8i Enterprise Edition (version 8.1.7) on the server machine.
[3]configured SQL*Net Client and NET8 on both client and server, and it works fine.
[4]install pre-configured repository using Oracle Designer 6.0 CD #2 (pre-configured repository),but it always gives me such info:
" You have not installed a local copy of Oracle8 Enterprise Edition, therefore, Oracle Designer and ODD D7O4 Preconfigured Repository can not be installed. Please re-install this product after the local
database has been installed."
It seems strange, I did install 8i Enterprise Edition (I even installed Oracle8 Enterprise Edition) before repository, I should have
a local database.
How should I do next ?

Hi Zhu:
Now that you are trying to install Designer, your problem is easy to solve.
I think you should download Oracle Designer 6i Release 4 for Windows from http://otn.oracle.com/software/products/designer/software_index.htm and then do your install again.
The install and the server side setup maybe time consuming, but I am sure you can do it.
You may install Designer 6i Release 4 in the following steps:
(Before do these, uninstall your Designer 6.0 both from your client machine and Windows 2000 server using Oracle Installer)
Step 0: download Oracle Designer 6i Release 4 from OTN to your local directory, say c:\temp and unzip it to c:\temp\Designer6iR4. I will refer this directory as installation media. Make sure that you have equipped your server machine with at least 256MB memory. In my experience, 386MB is better and 512MB is recommended.
Step 1: make sure that one database was created in your installed Oracle 8i. If not, create a database at this step. The parameters of this database should be adjusted according the needs of Designer 6i. You will be told how to do this later.
Step 2: install Designer 6i R4 from the installation media to server machine. Pay attention at this step that you should "select to install both Designer and Repository." It is recommended that Designer should be installed to another new ORACLE_HOME. Don't install it to your Oracle database home. Say, to the ORACLE_HOME "DESDEV".
Some more words need to be said here, I think, about the ORACLE_HOME for Designer. Later if you install Oracle Developer into the same machine as Designer is installed to, both the Oracle Developer and Oracle Designer should be installed into the same ORACLE_HOME. So the name DESDEV stands for "DESigner and DEVeloper are both installed into the same Oracle home named DESDEV". This will be prompted to you just after the installation of Designer was finished.
Step 3: print out "Oracle Repository/Designer Installation Guideh from "Stat->Programs->Oracle Repository 6i Doc - DESDEV". I will refer this material as gManualh from here till the end of our talk.
Step 4: shutdown your database if it is running and then set the parameters to the correct values (required values) according to gCheck the settings in the Oracle initialization parameter fileh in the Manual, Chapter 2 Server-side installation, migration and upgrade.
Step 5: startup the database and then check the parameters. To do this, you need to login to database as user sys and then issue the command gshow parametersh. If all the parameters are correct you may go step 6. You may leave the database running.
Step 6: make sure that the database is running. If not, startup database here. Before proceed to install Designer 6i Server-side, the database should in running status.
Step 7: do the server-sidefs install of Designer 6i (that is, Repository) according to gChapter 2 Server-side installation, migration and upgradeh in Manual. In that part of manual, 17 steps of installation and setup Designer 6i server-side were mentioned. I am sure you can manage that with ease.
Step 8: install Designer 6i client-side into your client machine according to hChapter 1 Client-side installationh in Manual from the installation media.
By the way, I should tell you how much time it takes to accomplish all of these steps IF things were went smoothly: it took about 6 hours for me to have all these steps done. And my machinefs specifications is:
CPU 633MHz
RAM 512MB
Wish you good luck
null

[Desktop] Pre-configured installs

Any suggestions on how to create pre-configured installers of the same base app? Here's an example of what I mean:
App: This base app connects to a configurable server domain. You could install and use this app just fine.
App for ClientX - This app should connect to serverX, and I want to pre-configure it to do so. It may also have custom configured branding for ClientX.
App for ClientY - This app should connect to serverY, etc.
So I want to be able to give ClientX an installer (or install link) that installs the App pre-configured to connect to their serverX, and I want to give ClientY an installer that connects to their serverY, but I want both to be the same application, built from the same codebase, with the same appID and certificate, and receive the same updates, etc.
I've considered using compile constants to create different AIR app versions with populated strings, which I think would work though a bit clunky, but would result in different versions of the app, when what I really want is to have the SAME version configured differently.
What I am currently doing is making a config file that can be shared, so the main app is installed then the client opens the config file with the app (file association makes this relatively easy, but still very manual feeling.) I would essentially like to automate this, so the end user only needs to run the installer.
The next step would be automating this process, so that when ClientZ purchases the app it uses ClientZ's information to provide an installer configured for ClientZ without manual human intervention. You know, for when my app inevitably gets famous and makes me rich.
Any suggestions?
Thanks all!
-Aaron

Well I'm not quite sure this fits your scenario but maybe (assuming your clients install your app from a website)...
You can use the swf (badge) method of installing AIR apps through the browser: http://help.adobe.com/en_US/AIR/1.5/devappsflex/WS5b3ccc516d4fbf351e63e3d118666ade46-7e15. html
This would give you the ability to pass in arguments into the install process. http://help.adobe.com/en_US/AIR/1.5/devappsflex/WS5b3ccc516d4fbf351e63e3d118676a5d46-8000. html#WS5b3ccc516d4fbf351e63e3d118666ade46-7e19
Basically you set your air app to "<allowBrowserInvocation>true</allowBrowserInvocation>" and add a listener for the BrowserInvokeEvent(not InvokeEvent)
Do what you want with the parameters (maybe save to a flash shared object) to remember who it was.
Then for distribution, provide a client only page, that passes flash vars into the badge swf, which passes them to the app for install.
I recently used this method in this way. I'm building a video conference app that can send invitations via a URL (videoapp.com?id=abcdefghijklnop).. On that page I have the badge (swf) that recieves that invitation through flash vars. The badge does the install of the AIR app and passes the invitation once it runs.
Note: I had to modify the default badge.swf to include my additional flash vars.
Other than this, I dont know of any way to add arguments to just a regular passed around .air file.

Pre-configured MI Client

Hi MI guys,
is it possible to create a pre-configured MI client for deployment?
Question 1:
I want to set the right servers and some other configuration for the standard MI client so that the users don't have to enter something during installation?
Question 2:
What about using a deployment software like enteo Netinstall for installing a basic MI client? My thoughts are, I install and configure a MI client without synchronizing and this will be deployed via Netinstall on the client device (without installation routine of MI client).
Thank you and regards,
Florian

Hi Florian,
The short answer to both of those questions is "yes".
In our environment we used "Wise for Windows" utility to install SAP MI client with required parameters (IP address, SAP system ID, etc.), and then compile new .MSI package with pre-setup parameters.
And yes, we are able now to install it automatically now for our clients via Script Logic. It uses MSIEXEC on the background with "/quiet" option enabled and because of pre-configured settings, no input from end user is required during install process.
I think it should work properly with the other deployment tools, as they uses the similar logic.
Hope this answers your question.
Best regards,
Laziz

Deploying 1131s and 3502s - Pre-configured APs

We pre-configure our APs with IP address, subnet mask, default gateway and controller IP address. Our APs are on separate subnets by themselves. All of the 1131's found the controller and came up. None of the 3502s found the controller. We then had to use the ip helper-address command and the ip forward-protocol command on the router for the 3502s - that worked. Why don't the 3502s come up like the 1131s without the router commands?

When you configured the controller ip address on the ap, did you also included the controller name? I usually configure the ip address of the controllers in the dhcp option 43 or as a dns name so lost aps will come up. When statically assigning an ap, you should set the ip address AND the controller name under capwap not lwap.
Sent from Cisco Technical Support iPad App

Changing the configurations of pre-configured BOM on a Sales Order

Hello experts,
Our client's business is similar to OEC Computers. However, I am not able to map the following business scenario:
They sell servers to customers however, it is unusual that the client buys the pre-configured model as provided by the principal. therefore, as per the specific requirements of customer they change the configuration of the server.
For e.g. the pre-configured model has 2GB of RAM however, the customer wants to replace the the 2GB RAM with a 4GB RAM.
The replacement is important to track as Inventory will have an affect on it.
Please advise the possible solutions.
Regards

Hi Adeel,
At the time of Production order you chane the 4GB RAM Instead of 2GB.
Traking of the Replacement item you use some Additional query report to be use.
*Close the thread if issue solved.
Regards
Jambulingam.P

NAC guest server and pre-configured duration of accounts

There seems to be a bug in the way the NAC guest server handles the pre-configured duration of guest accounts.
I have followed the manual and I did:
- Configured 3 durations (24h, 48h and 1 week) under the templates/accounts/accounts durations.
- And set "maximun duration of account" under User Groups
As I understand I should now be able to select one of the three configured durations when I login as a sponsor.
However I only get the number which I specified under User Group.
The odd thing is that if I change the Maximum duration under User Group, I get this as the only choice (e.g. 14 days).
Have other experienced this?
Best regards,
Steffen Lindemann

You can use any one of the option ie number of days or number of hours.
For days;
Authentication > User Groups > Add Group | Edit Group includes two new settings for Number of days in the future the account can be created and Maximum duration of account (in days)
For hours:
User Interface > Templates > Add Template | Edit Template > Accounts > Account Duration
http://www.cisco.com/en/US/docs/security/nac/guestserver/release_notes/11/gsrn110.html

Query on Pre-configured (standard) settings

I am working on my first SAP-HCM project (ECC 6.0). When I sarted configuring the enterprise & personnel structure (pers. area, pers. subarea, emp group, emp. subgroup), I noticed that there were already many entries in all of them. I used some some of the configurations without changing anything (e.g. employee group 1 - Active), used some configurations by changing the "description/Text" for the relevant code and I also created some new entries for personnel area & personnel sub area.
My query is:
1. Should we delete all the standard settings, which are not needed for our project?
2. If not, when we later transport the confifuration settings, should we transport only what is relevant to the project or transport all the standard (pre-configured) configuration settings also?
-Shambhvi

1. Should we delete all the standard settings, which are not needed for our project?
2. If not, when we later transport the confifuration settings, should we transport only what is relevant to the project or transport all the standard (pre-configured) configuration settings also?
For 1& 2 :-
No need to delete any standard settings. create your own settings and transport those settings, anyways for standard there will be no request to transport. so no need to do any thing. just create your setting, it will generate transport request. just transport that request. deleting standard settings is not a best practice. it will create unnecessary headaches later.
Regards,
SAPUUSER

Using a pre-configured Hibernate SessionFactory

Similar Messages

Maybe you are looking for