Using a prompt in Grid1 also changes Grid2 in Hyperion Reports

In Hyperion Reports, I have a report that is made up of twogrids. The first grid points to an income statement database,and the second grid points to a balance sheet grid. Bothgrids have the same column sets, but different row sets because ofthe different databases. What I am trying to do use a promptto change the members in the columns for both grids. Currently, I have two sets of prompts for the report, one foreach grid - each asking for the same selections. This makesthe report prompts repetitive. Is there a way to have Grid2pull the same members that Grid1 prompts for - similar to the"Same As Member Selection In" function that works for themembers within a single grid? Thanks

Hi Kahlua17, You can define your grids' POVs to "Current PointView". It will inherit the propertie values on the main reportPOV values and display the result you want based on the values youhave set. Ruel

Similar Messages

"Photo Library" thumbnail disappeared (use to be there) - Name also changed

Hey,
I just got a new 3GS after my 3G was stolen. I first fired up itunes yesterday, and under 'photos' it offered a view of 4 blue folders (everything in "My Pictures"). It wouldn't let me browse 'into' a folder, so I moved the actual folder itself so it's root was in my pictures. Obviously at this point it showed, up, I selected it, hit sync.
Now -- the view from within my phone when I selected "Photos" showed my different libraries, and the one I just uploaded ( all my contact wallpapers) had the NAME of the folder, as well as a thumbnail for the first photo in the folder. I loved this..
I went back into itunes and saw the option to 'select folder', so i moved the folder back from root of my photos to where it belongs. Then when I selected that folder, the blue itunes folder viewer disappeared and now it's only the folder I selected with an empty screen.
When I go back into 'Photos' after it syncs, the preview image is no longer there, and the name of the library has reverted back from the name of the folder to simply "Photo Library" with the default picture of the stupid yellow flower.
In iTunes I can't get it back to the original way it was before I selected a custom folder. Is there any way I can get this back?
Thanks
it's a minor detail but, I really like it cause when I show pictures to people they will see my thumbnails of the different libraries, along with cool names

Wow I actually just got it
I fiddled with it 5 seconds longer.
What I had to do was select the 'My Pictures' from the file selector, then cancel the sync (i have like 5gb of pics...), then i went away from the screen, then came back, and suddenly the folder selector is back.
I moved the folder back into root, and now it shows the name of the folder in "photos" , along with the preview image !
Rock on

The "Apple ID Password box along with the keyboard keeps popping up on my iPad and stays there. I have changed my email address on my iMac but my old one still remains on the iPad. Also changed password. Nothing works! I can't use the iPad like this!

The "apple ID Password" box along with the keyboard pops up when I turn the iPad on and it stays there. I have changed my email address on my iMac and also changed my password. The old email address is still on the iPad. Anyway, I can't use the iPad because can't get the apple id password box to go away. Thanks for any help!

This is an older photo but the sleep and home buttons are still in the same place on all iPads. The home button is the round button at the bottom of the iPad and the sleep button is also called the on/off button and it is at the top right corner of the iPad.

While using my iPhone the system behavior changed where I now have to click on the app to select it, then double click to launch it. Same goes for entering in my password to access the phone and entering digits to make a phone. I am also having trouble

While using my iPhone the system behavior changed where I now have to click on the app to select it, then double click to launch it. Same goes for entering in my password to access the phone and entering digits to make a phone. I am also having trouble swiping the screen to move to the next page. This is no longer working. I did not change any settings, the phone just started behaving this way. Any ideas on how to revert back to the single click selection/launch? Any assistant is greatly appreciated. Thank you!

Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

Can we change filter column values in a union query using Dashboard prompt

Hi,
I have a requirement in which have to draw a chart report for last six months?.
When i query against database, my query got different where clause for open month and close month.
Say for july month bar, it got close month as july and open month as july, june, may. Like this, for june month bar, it has to have close month as june and open month as june, may, april. like this, i created six union queries using repository variable.
Want to give control using dashboard prompt for close month and open month?
my query look like this.
select close month1, fact1 from table1
where close month = july and open month in (july, june, may)
UNION
select close month2, fact2 from table1
where close month = june and open month in (june, may, april)
UNION
select close month3, fact3 from table1
where close month = may and open month in (may, april, march)
UNION
select close month4, fact4 from table1
where close month = april and open month in (april, march, february)
UNION
select close month5, fact5 from table1
where close month = march and open month in (march, february, january)
UNION
select close month6, fact6 from table1
where close month = february and open month in (february, january, december)
Welcome your suggestions on this?.
Thanks

Hi Karol,
Yes the prompt is working fine when i put this following method under the "Button" Component.
APPLICATION.openPromptDialog(800, 600);
Somehow the when i use the "Input Field" and use the "Button" Component and write this following logic inside it i don't see the prompt is not taking the values what i am entering in input field i assume that its issue with data-source not getting refreshed.
Variable=INPUTFIELD_1.getValue();
APPLICATION.setVariableValue("PercentageIncrease",Variable);
Thanks,
Kumar

Images flash black when I use select / lasso tools. Background also changes color.

Help? It's incredibly distracting to try and select parts of an image when the images are acting like strobe lights. This happens not only with the lasso but also when I am resizing an image. It is soley the images that flash black - the rest of the program is unaffected.
The background also changes from gray/white squares to grey to black when I zoom in or out.

Are you sure you want the Premiere Pro forum?

Displaying login sessions on workstations using Command Prompt

Hi there,
Anyone know of a command similar to wmic.exe /node:IP-or-HostName ComputerSystem Get UserName in a Command Prompt which displays remote login sessions on a workstation rather than the console login sessions that use local accounts set up
on workstations.
Thanks,
RocknRollTim
P.S. I was redirected by a couple of forum users off the Microsoft Community Forum.

Hi Ben Lavender,
Thank you for responding to my forum thread again and thank you for making the correction on the WMIC command, I tried both sets of commands for WMIC and found that the WMIC command in your previous post was invalid whereas the one you posted last was correct
and was showing results, however there a few questions I would like to ask with regards to the WMIC command you posted last. How far back does the command go? When there are no dates and times next to account entries, does this mean that users have never logged
on to that machine or does this mean that the remote system has never retained this information in it's registry? I remember doing an error check on the machine I tested this command on as it was having performance problems and was developing a bad sector
on the disk at the time, would this cause the information not to display as expected? Also I configure out the date and time entry for each account entry but what does the information after the decimal point mean? Does it represent milliseconds for the time
element? Lastly I tried running the psloggedon app from the psloggedon suite on my Windows 7 x64 machine and now when I come to run it, it appears for a split second and then disappears, the same also happens for all the other apps from the psloggedon suite
after agreeing to license agreement for each app. I decided to do some research to confirm what are the system requirements to run the apps from this suite and the website says that it's only compatible with systems that have Windows XP and higher and/or Windows
Server 2003 and higher which I thought should have worked, I then decided to run the apps as Run As Administrator and they did the same thing as before, I also changed the compatibility settings of each app to run as Windows XP Service Pack 3 but again they
all did the same thing as before, does this mean that the suite of apps aren't compatible with 64-bit systems and only work with 32-bit systems?
Your help would be much appreciated.
Kind regards,
RocknRollTim

I have a game but it only for one apple id and one divece but someone i dont know id play that game and using my apple id and i want to know if u can block them from using ur apple id and also erase all the games they downlode with the apple id

I have a game but it only for one apple id and one divece but someone i dont know id play that game and using my apple id and i want to know if u can block them from using ur apple id and also erase all the games they downlode with the apple id

There probably is, but it requires that you be able to use punctuation and write in sentences so that we can understand exactly what you want.
You can block others from using your Apple ID by changing your password. There is no way to erase what was already downloaded on to someone else's device, for obvious reasons,

I have changed my e-mail address and therefore need to change my apple ID. When I change it to my new address it says it is already my rescue address and cannot be used. Any ideas how to change my rescue address?

I have changed my e-mail address and therefore need to change my apple ID. When I change it to my new address it says it is already my rescue address and cannot be used. Any ideas how to change my rescue address?

To change the iCloud ID ("email address") you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. When you do this you may find that the password for your old ID isn't accepted. If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

I have changed operator and also changed IOS and did a back up of my old phone in Itunes so i would keep all my contacts etc. Now when i want to get everything back in the phone, Itunes asks me for a password, which i do not have. How to bypass this?

I have changed operator and also changed IOS and did a back up of my old phone in Itunes so i would keep all my contacts etc. Now when i want to get everything back in the phone, Itunes asks me for a password, which i do not have since i did not enter any password when i did the back up. Is there any way I can bypass this password request? Otherwise i have lost all my contacts etc.
Greatful for help.

Contacts are designed to be synced to a supported application on the computer or a cloud service like Gmail, iCloud, or an Exchange server.
Have you failed to use the device as designed?

Behavior of customer exit variables (used as prompt) in a workbook

Hi All,
We are on NW2004s. I am using a customer exit variable in the prompt for my query then saved the query as a workbook.
1. When I run the query the customer exit routine/program is called and the selection screen variable is populated with the correct value.
Ex. Calendar year variable is a prompt variable defined as customer exit variable that gets the current year.
when you run the query the prompt for calendar year shows "2007" as default value. this is correct.
2. when I run the workbook using this same query, it looks like it is not executing the customer exit program. The value in the calendar year prompt is whatever the last value used when the workbook was last ran.
I also placed a breakpoint in the customer exit program (EXIT_SAPLRRS0_001) to check if it is being called and it looks like it isn't.
Is there a configuration/property that I should enable/check to make sure that customer exit variables used as prompts works in workbooks? Is this a bug? Anybody else have issues with using customer exit variables as prompts in their workbooks?
Thanks in advance,
Malou

Hello Marilou,
See the abswer I got from the 1st response on my question
Save and reuse variable option in 7.0
It may be a good help.
Variables seem to be an understated item in the documents.
Kind regards
Message was edited by:
BI developer

Prompt user to save change before abnormally closing the application

Hi,
I've some trouble prompting user to save change before abnormally closing the application (logging off, shutdownding machine...). I tried to use Runtime.getRuntime().addShutdownHook() and it doesn't seem to work. Here's part of my code. Help please!!!
program print out "1" and stays in a "dead-lock" mode...
private void shutdown() {
boolean saveConfig = true;
if (saveConfig) {
System.out.println("1 ");
int answer = JOptionPane.showConfirmDialog(null,
"Configuration has been changed. Do you want to save
configuration before exit?",
"Save Config"
JOptionPane.
YES_NO_CANCEL_OPTION);
JOptionPane.showMessageDialog(this, "Can't connect to unit. Error in Heal unit!", "Error", JOptionPane.INFORMATION_MESSAGE);
System.out.println("2 ");
if (answer == 0) {
savefileButton_actionPerformed();
jMenuFileExit_actionPerformed();
else if (answer == 1) {
jMenuFileExit_actionPerformed();
else {
return;
else {
int answer = JOptionPane.showConfirmDialog(itself,
"Are you sure you want to exit? ",
"Exit",
JOptionPane.YES_NO_OPTION);
if (answer == 0) {
jMenuFileExit_actionPerformed();
else {
return;
private class MyShutdownHook extends Thread {
public void run() {
shutdown();
// add shutdown hook
MyShutdownHook shutdownHook = new MyShutdownHook();
Runtime.getRuntime().addShutdownHook(shutdownHook);

doesn't much matter. shutdown hooks are not guaranteed to run or be able to finish.

I had a Microsoft tech access my computer remotely to resolve issues with my hotmail acct. There were files that needed to be deleted and he also changed some settings. Later, when I tried to open InDesign I received the following error: AMT Subsystem

I had a Microsoft tech access my computer remotely to resolve issues with my hotmail acct. There were files that needed to be deleted and he also changed some settings.
Later, when I tried to open InDesign I received the following error:
AMT Subsystem Failure
The licensing subsystem has failed catastrophically. You must reinstall or call customer support.
I rebooted the computer and tried again:
Licensing for this product has stopped working.
You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or Adobe customer support for help.
I can access Acrobat and MS Office programs, it's just the CS3 programs that I can't access. Can I uninstall and then reinstall CS3 without an access (un-lock) code?

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

What is use of AT NEW and AT CHANGE

what is use of AT NEW and AT CHANGE

Using AT NEW
Use at new to detect a change in a column from one loop pass to the next. This statements enable you to execute code at the beginning of a group of records.
Syntax for the at new Statement
sort by c.
loop at it.
    at new c.
     endat.
    endloop.
where:
it is an internal table.
c is a component of it.
The following points apply:
This statements can only be used within loop at; it cannot be used within select.
at new does not have to come before at end of. It can appear in any order.
This statement can appear multiple times within the same loop. For example, you could have two at new and three at end of statements within one loop and they can appear in any order.
These statements should not be nested inside of one another (that is, at end of should not be placed inside of at new / endat).
There are no additions to these statements.
Each time the value of c changes, the lines of code between at new and endat are executed. This block is also executed during the first loop pass or if any fields to the left of c change. Between at and endat, the numeric fields to the right of c are set to zero. The non-numeric fields are filled with asterisks (*). If there are multiple occurrences of at new, they are all executed. at end of behaves in a similar fashion.
A control level is the component named on a control break statement; it regulates the control break. For example, in the following code snippet, f2 is a control level because it appears on the at new statement.
loop at it.
    at new f2.
        "(some code here)
        endat.
    endloop.
It is said that a control break is triggered if the control level changes. This means that when the contents of the control level change, the code between the at and endat is executed.
A control break is also triggered if any of the fields prior to the control level in the structure change. Therefore, you should define the internal table structure to begin with the fields that form your control levels. You must also sort by all fields prior to and including c.
Between at and endat, numeric fields to the right of the control level will be zero and non-numeric fields will be filled with asterisks.
Using ON CHANGE OF
Another statement you can use to perform control break processing is on change of. It behaves in a manner similar to at new.
Syntax for the on change of Statement
The following is the syntax for the on change of statement.
on change of v1 or v2 .
else.
endon.
where:
v1 and v2 are variable or field string names.
any number of or conditions might follow.
The following points apply:
If the value of any of the variables (v1, v2, and so on) changes from one test to the next, the statements following on change of are executed.
If no change is detected and else is specified, the statements following else are executed.
on change of differs from at new in the following respects:
It can be used in any loop construct, not just loop at. For example, it can be used within select and endselect, do and enddo, or while and endwhile, as well as inside get events.
A single on change of can be triggered by a change within one or more fields named after of and separated by or. These fields can be elementary fields or field strings. If you are within a loop, these fields do not have to belong to the loop.
When used within a loop, a change in a field to the left of the control level does not trigger a control break.
When used within a loop, fields to the right still contain their original values; they are not changed to contain zeros or asterisks.
You can use else between on change of and endon.
You can use it with loop at it where . . ..
You can use sum with on change of. It sums all numeric fields except the one(s) named after of.
Any values changed within on change of remain changed after endon. The contents of the header line are not restored as they are for at and endat.
When a loop begins execution, the system creates a global auxiliary field for each field named in an on change of statement contained by the loop. On creation, these fields are given default initial values (blanks or zeros). They are freed when the loop ends.
Each time on change of is executed, the contents of its fields are compared with the contents of the global auxiliary fields. If they are different, the on change of is triggered and the auxiliary fields are updated with the new values. If they are the same, the code within on change of is not executed
Because global auxiliary fields do not exist outside a loop, you cannot use on change of outside of a loop.
I hope it helps.
Best Regards,
Vibha
Please mark all the helpful answers

Using dashboard prompts to initialize session variables

hi everyone,
I want to know if it's possible to have a dashboard prompt that is only used to change session variables. This prompt would stay in a tab without any report.
Can this be done?

when the user changes the variables in the promptI guess its value not the variables ....am i right?
the variables seem to work just in the tab where the prompt is, although the prompt is set to be valid in the dashboard.1 ) Request/Presentation variable scope is in Dashboard or page
2) As i shown in screen shot in a Dashboard Demo have two pages req variable and multi select when i change the value in prompt it was changing the value in qty variable means initializing the session variable value
The screen shot dat i gave is what are you looking or some thing else??
thanks,
saichand.v

Using a prompt in Grid1 also changes Grid2 in Hyperion Reports

Similar Messages

Maybe you are looking for