Using a public proxy server

If I want to use a public proxy server, do I need to install a software. I can't find any software as most of them are for Windows only.
Thanks

I just tried putting the public proxy address to the right (under HTTP and HTTPS), after I clicked applied, it seems like it still wasn't using the public proxy. I went to check out my IP from a website and still shows me original proxy address.
I am using Safari browser. Did I miss something in the setup?

Similar Messages

  • HT1296 Comcast does not allow me to use iCloud to sync my iPhone.  An apple genius gave me a special DNS server to allow syncing.  That did not work at home.  So I used a secure proxy server outside the US, and then was able to sync.

    Comcast claims that are not blocking ports.  Technically from what I understand they are not.  They just don't recongnize the iCloud server address on their DNS.  An Apple Genius gave me a "free access DNS" which they use in the Oakrigde store to sync to iCloud.  It works great in the store with my computer and iPhone but not at home.  After a comversation with an IT person in Germany he explained that due to the limited number of ports available and the almost infitinite appetite for ports companies often choose to manage the number of ports avialable for use by their customers.   What did work for me was to use a secure proxy server with secure encoding.  It works great!  However as the cloud does seem to go down from time to time I would prefer to also have the USB cable option for syncing. 

    This does not make sense. If comcast blocked iCloud.com there would be millions of posts here about it, as comcast is one of the largest ISPs in the US. Most likely you have DNS settings messed up in your router or your computer. Ports and DNS have nothing to do with each other. A "port" is just part of a complete URL. Using a port does not have any affect on the ISP, who doesn't even see the port in the packet.

  • Using ACE for proxy server load balancing

    Hello groups,
    I wanted to know your experiences of using ACE for proxy server load balancing.
    I want to load balance to a pool of proxy servers. Note: load-balancing should be based on the HTTP URL (i can't use source or dest. ip address) so that
    a certain domain always gets "cached/forwarded" to the same proxy server. I don't really want to put matching
    criteria in the configuration (such as /a* to S1, /b* to S2, /c* to S3,etc..), but have this hash calculated automatically.
    Can the ACE compute its own hash based on the number of "online" proxy servers ? ie. when 4 servers are online, distribute domains between 1,2,3,4 evenly.
    Should server 4 fail, recalculate hash so that the load of S4 gets distributed across the other 3 evenly. Also load-balancing domains of S1 ,S2 and S3 should not change if S4 fails.....
    regards,
    Geert

    This is done with the following predictor command:
    Scimitar1/Admin# conf t
    Enter configuration commands, one per line.  End with CNTL/Z.
    Scimitar1/Admin(config)# serverfarm Proxy
    Scimitar1/Admin(config-sfarm-host)# predictor hash ?
      address         Configure 'hash address' Predictor algorithms
      content         Configure 'hash http content' Predictor algorithms
      cookie          Configure 'hash cookie' Predictor algorithms
      header          Configure 'hash header' Predictor algorithm
      layer4-payload  Configure 'hash layer4-payload' Predictor algorithms
      url             Configure 'hash url' Predictor algorithm
    Scimitar1/Admin(config-sfarm-host)# predictor hash url
    It does hash the url and the result takes into account the number of active proxies dynamically.
    This command has been designed for this kind of scenario that you describe.
    Gilles.

  • Use of Public DNS Server

    I have an iMac, Mac Mini and a Macbook Pro connected to a Airport Extreme Base Station. I normally use a Public DNS Server and I am not sure where to put the DNS URLs. Do I put them on the individual computers or is there somewhere in the Airport Extreme Base Station that they go? where ever they belong please provide location and instructions. Thanks.

    Configuring the AirPort Extreme with the DNS makes it so that you do not have to configure each individual computer on the WLAN, the DNS settings will be handed down to the devices when they are given their internal IPs, but as long as the base station does not have a competing/conflicting DNS setup, configuring each individual device, as suggested by Carolyn, works also.
    However, something strange can happen sometimes when you use a public DNS setup. I use the one Carolyn suggests, OpenDNS, but I cannot access any of the webpages of my ISP with this configuration. I have Todo en Uno (All in One), a service that provides cable, telephone and internet service from my local cable company, CableVisión. So with the OpenDNS setup I cannot configure the digital options for my telephone service, such as blocking and unblocking Int'l long Distance calls. I have to remove the OpenDNS setting to do so. But I created a work around using Locations in the Network settings. I have one Location with my ISP's DNS settings and another Location with OpenDNS settings. I can quickly switch between the two when I need to access my ISP's website.
    Dah•veed

  • Issue with using Sun Java Proxy Server

    We are trying to access the WebService using the Sun Proxy Server.
    When I access the WebService through proxy ,I find the error message in proxy error log as
    [18/Oct/2005:19:10:40] failure ( 1288): for host 127.0.0.1 trying to POST http://localhost:1080/yodsoap/services/CobrandLogin, service-http reports: HTTP7760: error reading request body (Client closed connection)
    and the access log is as follows:
    POST http://localhost:1080/yodsoap/services/CobrandLogin HTTP/1.1" 400 147
    But when i see the WebServer access log for the same WebService POST /yodsoap/services/CobrandLogin HTTP/1.1" 200 1783 "-" "Axis/1.1RC1"
    This case is happening when the request is compressed for the webservice. and the request headers are as follows:
    POST /yodsoap/services/CobrandLogin HTTP/1.1
    Content-Type: text/xml; charset=utf-8
    Accept: application/soap+xml, application/dime, multipart/related, text/*
    User-Agent: Axis/1.1RC1
    Host: 127.0.0.1
    Cache-Control: no-cache
    Pragma: no-cache
    SOAPAction: "loginCobrand"
    Content-Length: 1412
    Connection: close
    Content-Encoding: gzip
    And the response headers are as follows:
    HTTP/1.1 200 OK
    Server: Resin/3.0.8
    Content-Type: text/xml; charset=utf-8
    Transfer-Encoding: chunked
    Date: Tue, 18 Oct 2005 13:41:50 GMT
    So ,we found out that if we dont use the proxy server,then the WebService is working properly,but if we start using the proxy server,we are encountering HTTP400 error.
    Any ideas will help out to solve this problem..???
    Thankz in advance.
    Regards,
    Somendra

    This is what I see in the error message:
    ProxyFactory initialized in SOAP_CLIENT_MODE
    System property : com.yodlee.soap.client.log4j.config not found. Using the default config resource : com.yodlee.util.soap.log4j
    ProxyFactory initialized in SOAP_CLIENT_MODE
    System property : com.yodlee.soap.client.log4j.config not found. Using the default config resource : com.yodlee.util.soap.log4j
    HTTP Header name and value is HTTP/1.1 400 Bad request
    HTTP Header name and value is Server Sun-Java-System-Web-Proxy-Server/4.0
    HTTP Header name and value is Date Tue, 18 Oct 2005 14:56:21 GMT
    HTTP Header name and value is Connection close
    com.yodlee.core.CoreRemoteException: org.xml.sax.SAXException: Bad envelope tag: HTML
         at com.yodlee.soap.core.login.CobrandLoginSoapClientProxy.loginCobrand(CobrandLoginSoapClientProxy.java:132)
         at SoapClient.main(SoapClient.java:45)
    Caused by: org.xml.sax.SAXException: Bad envelope tag: HTML
         at org.apache.axis.AxisFault.makeFault(AxisFault.java:129)
         at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:543)
         at org.apache.axis.Message.getSOAPEnvelope(Message.java:376)
         at org.apache.axis.client.Call.invokeEngine(Call.java:2511)
         at org.apache.axis.client.Call.invoke(Call.java:2481)
         at org.apache.axis.client.Call.invoke(Call.java:2176)
         at org.apache.axis.client.Call.invoke(Call.java:2099)
         at org.apache.axis.client.Call.invoke(Call.java:1622)
         at com.yodlee.soap.core.login.CobrandLoginSoapBindingStub.loginCobrand(CobrandLoginSoapBindingStub.java:225)
         at com.yodlee.soap.core.login.CobrandLoginSoapClientProxy.loginCobrand(CobrandLoginSoapClientProxy.java:119)
         ... 1 more
    Caused by: org.xml.sax.SAXException: Bad envelope tag: HTML
         at org.apache.axis.message.EnvelopeBuilder.startElement(EnvelopeBuilder.java:107)
         at org.apache.axis.encoding.DeserializationContextImpl.startElement(DeserializationContextImpl.java:934)
         at org.apache.crimson.parser.Parser2.maybeElement(Parser2.java:1635)
         at org.apache.crimson.parser.Parser2.parseInternal(Parser2.java:634)
         at org.apache.crimson.parser.Parser2.parse(Parser2.java:333)
         at org.apache.crimson.parser.XMLReaderImpl.parse(XMLReaderImpl.java:448)
         at javax.xml.parsers.SAXParser.parse(SAXParser.java:345)
         at org.apache.axis.encoding.DeserializationContextImpl.parse(DeserializationContextImpl.java:230)
         at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:538)
         ... 9 more

  • Trying to use with TOR - 'Proxy Server is refusing connections' but TOR is connected.

    Added TOR button to Firefox. It could be a TOR problem, but the TOR control panel shows it as connected. When I make TOR enabled and try to go to a website, I get the 'Proxy Server is refusing connections' message.

    In Firefox 3.6.4 and later the default connection settings have been changed to "Use the system proxy settings".<br />
    See "Firefox connection settings" in [[Server not found]]
    You can find the connection settings in "Tools > Options > Advanced : Network : Connection"
    If you do not need to use a proxy to connect to internet then select No Proxy

  • My internet connection keeps reverting back to using a manual proxy server configuration pointing at 127.0.0.1 Port 55414. I've tried the help regarding the user.js and prefs.js files but still it continues to revert to the manual proxy configuration!

    I know how to change my network settings to fix my internet connection, I just select "Auto-detect network settings for this network" under Tools, Options, Network, Settings. However every time I close down Firefox it reverts to the manual proxy configuration pointing to 127.0.0.1 Port 55414.
    I've tried all the suggestions under saving your preferences but this hasn't worked so I'm at a loss as to what to do next. If I can't sort this I'll have to revert back to Internet Explorer as this doesn't have this problem!

    I know how to change my network settings to fix my internet connection, I just select "Auto-detect network settings for this network" under Tools, Options, Network, Settings. However every time I close down Firefox it reverts to the manual proxy configuration pointing to 127.0.0.1 Port 55414.
    I've tried all the suggestions under saving your preferences but this hasn't worked so I'm at a loss as to what to do next. If I can't sort this I'll have to revert back to Internet Explorer as this doesn't have this problem!

  • Using MAcMini/Mavericks as private proxy server

    Hi,
    I would like to use my home based MacMini running Mavericks as a proxy server while being outside Germany.
    Is there any software/addon I could install?
    I do not want to use a public proxy server.
    Thanks,
    Andre

    Hi,
    I would like to use my home based MacMini running Mavericks as a proxy server while being outside Germany.
    Is there any software/addon I could install?
    I do not want to use a public proxy server.
    Thanks,
    Andre

  • Use Proxy Server in front of StandAlone

    Hi All,
    I have a Standalone XMLP deployed in my environment.
    As standalone is by default deployed on 15101, I need use a reverse proxy server in front of it so that all reports are accessed from port 80.
    After I set the proxypass/reverseproxypass in my httpd.conf, I am able to login and see sample reports but the images are still pointing to old host:port.
    Please advice what further changes are requried to implement this.
    Thanks in advance.
    Rishi

    Did you ever get an answer to this?
    Kathryn

  • Cisco ime using local proxy server

    folks
    i've a strange process going on
    ime can't connect to any of my sensors and when i run a packet capture it looks like its using an old proxy server i had configured some time ago
    i've checked that IE isn't configured for a proxy but can't find where ime is picking it up from
    anyone any ideas?
    thanks                  

    Hello Sr,
    I can ensure you that there is one proxy between the IME workstation and the IPS sensors, it might be taking it from the Java setup.
    This of course might cause you problems while attempting to connect to the sensors,
    What are the work-arounds/solutions for this:
    1)Create an exception rule on the Proxy server
    2) Remove the Proxy server
    3) Try to connect from a workstation that does not go through that Proxy-server
    4) Go to Control Panel > Java > General > Network Settings - Select direct connectio
    Remember to rate all of the helpful posts, that is as important as a thanks
    Julio Carvajal

  • How to configure a proxy server for Windows Azure Tools in Visual Studio 2013

    Hi Visual Studio/Azure Tools team
    I would like to use the Windows Azure tools in Visual Studio 2013 to manage my Azure Web sites (Server Explorer -> Windows Azure -> Web Sites) from within my corporate network which is secured using a proxy server. Unfortunately, I am not able to use
    the Windows Azure tools since the required HTTPS connection to windows azure is not going through the default configured proxy. Instead, Visual Studio tries directly to connect to port 443 which is blocked by our corporate firewall (and yes: there is no way
    around using our proxy server). Other visual studio features like NuGet, updates, etc. work fine and use the configured proxy server. 
    So my question: How can I configure visual studio respective its Azure tools to use a proxy server instead of a direct connection? I already tried configuring the proxy server within the file devenv.exe.config but this doesn't show any effect for Windows Azure
    tools.
    Regards
    tschaena

    As we have very similar problems I consider the found solution a work arround an existing problem which will not work if corporate FW policy does not allow such changes.
    In my mind, any tools in charge of dealing with some sort of FW protocols should deliver the following information, should make it absolute clear how to setup that the request packages are setup rigth at the first time.
    a) proxy server
    b) proxy port
    c) proxy user
    d) proxy users-password
    e) proxy.auth.Preference="BASIC"
    And for moste tools (including Visual Studio and AZUR Tools) it is absolut unclear
    a) how to setup that on a per tools basis
    b) OR who inherits this information from whom    i.e. use the same as IE does, what if we use FireFox or any other browsers?
    I understand that developers requested to cure such problem areas will often have difficulty to gain all required elemenst used to realy test the solution.
    But I can tell you: I loos more time figthing down the FW setups for my clients. WHat I do at home in a sniff, takes ages to be realised by all the various clients on the market where each has to deliver the same sort of information but actually does not,
    or has it just somewhere, but not in the vicinity of the demanding user.
    Good examples i.e. NetBeans IDE where the Option Menu shows very clearly what information is required to pass through a FW/Proxy; but even there, the hint to start with a BASIC authentication schema is not part of this OPTION menu and must be added a JAVA
    environment value. But at least, it works.
    Sepp

  • Socks services errors in web proxy server

    Using SunOne web proxy server 3.6+sp1, the socks service frequently out of service. Sometime its process is still alive , but can't response the client request; sometime the process is gone! The following is the errors log:
    [25/Oct/2002:11:18:06] 8269 debug: io_loop: killing tunnel after rollover, lastactivity == 1966619898,PR_IntervalNow says 2026622109
    [25/Oct/2002:11:20:31] 8269 debug: io_loop: killing tunnel after rollover, lastactivity == 1981101717,PR_IntervalNow says 2041102282
    [25/Oct/2002:11:20:48] 754 error: unknown request type 0x47 from 10.160.8.159:30 83
    [25/Oct/2002:11:41:07] 14946 debug: ACCEPT RETURNED NULL! io_total = 63 dead =-1
    Any infomation is welcome!

    what's the software name of socks? how i can download it?
    you mean it's not good?
    And the following is the issue in detail:
    The socks service frequently out of service. Sometime its process is still alive , but
    can't response the client request; sometime the process is gone.It occurs once a
    day, and after restart, its go away. And the last issue about must reconnect the gameroom
    is gone now, and was identified as the network's problem.
    mangus.conf:
    #ServerRoot /iPlanet/proxy/proxy-proxy-proxy
    ServerName proxy
    ServerID proxy-proxy
    Address 10.160.1.14
    Port 8080
    User root
    LoadObjects obj.conf
    RootObject default
    ErrorLog /iPlanet/proxy/proxy-proxy-proxy/logs/errors
    LDAPConnPool 5
    SearchDepth 30
    Dyngroups ON
    SearchTimeLimit 30
    BindTimeLimit 15
    LdapCheckUp 30
    CertificateChecking OFF
    PidLog /iPlanet/proxy/proxy-proxy-proxy/logs/pid
    MaxProcs 1024
    ProcessLife 128
    DNS on
    Security off
    Ciphers rc4,rc4export,+rc2,+rc2export,+des,+desede3
    SSL3Ciphers
    rsa_rc4_128_md5,rsa_3des_sha,+rsa_des_sha,+rsa_rc4_40_md5,+rsa_rc2_40
    md5,-rsanull_md5
    ACLFile /iPlanet/proxy/httpacl/generated.proxy-proxy-proxy.acl
    obj.conf
    # Netscape Communications Corporation - obj.conf
    # You can edit this file, but comments and formatting changes
    # might be lost when the admin server makes changes.
    Init funcs="icp-init,icp-route" shlib="/iPlanet/proxy/plugins/icp/icp.so" fn="load-
    modules"
    Init funcs="pa-init-proxy-array,pa-init-parent-array,pa-enforce-internal-routing,pa-set-
    parent-route,pa-set-member-status"
    shlib="/iPlanet/proxy/plugins/parray/parray.so" fn="load-modules"
    Init fn="load-types" mime-types="mime.types"
    Init access="/iPlanet/proxy/proxy-proxy-proxy/logs/access" format.access="%
    Ses->client.ip% - %Req->vars.pauth-user% [%SYSDATE%] \"%Req->reqpb.proxy-
    request%\" %Req->srvhdrs.clf-status% %Req->vars.p2c-cl%" fn="flex-init"
    Init fn="init-proxy" timeout="300" timeout-2="15"
    Init fn="init-dns-cache" status="on" dir="/tmp" semas="4" size="4096"
    expire="28800"
    Init fn="init-cache" status="on" ndirs="256" dir="/iPlanet/proxy/cache"
    Init fn="init-partition" status="on" name="p1" dir="/iPlanet/proxy/cache/p1" max-
    size="8000" min-avail="5"
    Init status="on" dir="/iPlanet/proxy/cache/p2" name="p2" max-size="8000" min-
    avail="5" fn="init-partition"
    Init status="on" dir="/iPlanet/proxy/cache/p3" name="p3" max-size="8000" min-
    avail="5" fn="init-partition"
    Init status="on" dir="/iPlanet/proxy/cache/p4" name="p4" max-size="8000" min-
    avail="5" fn="init-partition"
    Init status="on" dir="/iPlanet/proxy/cache/p5" name="p5" max-size="8000" min-
    avail="5" fn="init-partition"
    Init status="on" dir="/iPlanet/proxy/cache/p6" name="p6" max-size="8000" min-
    avail="5" fn="init-partition"
    Init status="on" dir="/iPlanet/proxy/cache/p7" name="p7" max-size="8000" min-
    avail="5" fn="init-partition"
    Init status="on" dir="/iPlanet/proxy/cache/p8" name="p8" max-size="8000" min-
    avail="5" fn="init-partition"
    Init fn="init-urldb" status="on" dir="/iPlanet/proxy/cache/urldb"
    Init fn="init-batch-update" status="off" dir="/tmp" conf-file="bu.conf"
    Init status="on" dir="/tmp" hash-size="17191" table-size="85955" expire="3600"
    fn="init-pauth-cache"
    Init config_file="icp.conf" status="off" fn="icp-init"
    Init set-status-fn="pa-set-member-status" file="/iPlanet/proxy/proxy-proxy-
    proxy/config/parray.pat" status="off" fn="pa-init-proxy-array"
    Init set-status-fn="pa-set-member-status" file="/iPlanet/proxy/proxy-proxy-
    proxy/config/parent.pat" status="off" fn="pa-init-parent-array"
    <Object name="default">
    NameTrans fn="map" from="file:" to="ftp:" cont="yes"
    NameTrans fn="pfx2dir" from="/ns-icons" dir="/iPlanet/proxy/ns-icons" name="file"
    NameTrans fn="pac-map" from="/" to="/iPlanet/proxy/proxy-proxy-
    proxy/pac/proxy.pac" name="file"
    PathCheck fn="url-check"
    PathCheck fn="check-acl" acl="proxy-proxy-proxy_formgen-READ-ACL_deny-
    5619"
    PathCheck fn="check-acl" acl="proxy-proxy-proxy_formgen-WRITE-ACL_deny-
    5619"
    Service fn="deny-service"
    AddLog fn="flex-log" name="access" iponly="1"
    AddLog fn="urldb-record"
    </Object>
    <Object name="file">
    PathCheck fn="unix-uri-clean"
    PathCheck fn="find-index" index-names="index.html"
    ObjectType fn="type-by-extension"
    ObjectType fn="force-type" type="text/plain"
    Service fn="send-file"
    </Object>
    <Object ppath="ftp://.*">
    ObjectType fn="cache-enable"
    ObjectType fn="cache-setting" max-uncheck="21600"
    Service fn="proxy-retrieve"
    </Object>
    <Object ppath="http://.*">
    ObjectType fn="cache-enable"
    ObjectType fn="cache-setting" max-uncheck="7200" lm-factor="0.100"
    Service fn="proxy-retrieve"
    </Object>
    <Object ppath="https://.*">
    Service fn="proxy-retrieve"
    </Object>
    <Object ppath="gopher://.*">
    ObjectType fn="cache-enable"
    ObjectType fn="cache-setting" max-uncheck="14400"
    Service fn="proxy-retrieve"
    </Object>
    <Object ppath="connect://.*:443">
    Service fn="connect" method="CONNECT"
    </Object>
    <Object ppath="connect://.*:563">
    Service fn="connect" method="CONNECT"
    </Object>
    socks5.conf
    # Netscape Communications Corporation - socks5.conf
    # You can edit this file, but comments and formatting changes
    # might be lost when the admin server makes changes.
    auth 10.160.0.0/255.255.224.0 - -
    auth - - u
    permit u,- - - - - - -
    set SOCKS5_BINDPORT 1080
    set SOCKS5_LOGFILE /iPlanet/proxy/proxy-proxy-proxy/logs/socks5.log
    set SOCKS5_DEBUG 1
    set SOCKS5_WORKERS 100
    set SOCKS5_ACCEPTS 5
    set SOCKS5_NOIDENT
    set SOCKS5_NOREVERSEMAP
    socks5.log
    [19/Nov/2002:11:31:14] 830 debug: request from 10.162.169.176:2305
    [19/Nov/2002:11:31:15] 830 debug: auth: userpass
    [19/Nov/2002:11:31:15] 830 debug: authentication type 2 successful for hs
    [19/Nov/2002:11:31:15] 830 debug: request 1 to jason314.3322.org:21
    [19/Nov/2002:11:31:15] 830 request: hs 5 connect: ok 10.162.169.176:2305 ->
    jason314.3322.org:21
    [19/Nov/2002:11:31:15] 831 debug: request from 10.162.169.176:2306
    [19/Nov/2002:11:31:15] 831 debug: auth: userpass
    [19/Nov/2002:11:31:15] 831 debug: authentication type 2 successful for hs
    [19/Nov/2002:11:31:15] 831 debug: request 1 to jason314.3322.org:21
    [19/Nov/2002:11:31:15] 831 request: hs 5 connect: ok 10.162.169.176:2306 ->
    jason314.3322.org:21
    access
    10.160.115.222 - scy-tl [19/Nov/2002:11:32:33 +0800] "GET
    http://www.eefoo.com/c
    ommunity/images/bbs0gg.gif HTTP/1.0" 200 146
    10.160.115.79 - whh-tl [19/Nov/2002:11:32:33 +0800] "GET
    http://fayhoo.com/image
    /blank HTTP/1.0" 404 276
    10.160.19.151 - lhb [19/Nov/2002:11:32:33 +0800] "POST HTTP://rich-bj.stockstar.
    com:8892/1 HTTP/1.0" 200 81
    10.160.160.130 - gsp-ld [19/Nov/2002:11:32:33 +0800] "GET
    http://images.sohu.com
    /cs/button/sony/12060.swf?clickthru=http://goto.sohu.com/goto.php3?code=sony-
    sh2
    40-fr12050 HTTP/1.0" 200 8302
    10.160.23.141 - wyn [19/Nov/2002:11:32:33 +0800] "POST HTTP://rich-
    bj.stockstar.
    com:8891/1 HTTP/1.0" 200 81
    10.161.159.40 - - [19/Nov/2002:11:32:33 +0800] "PUT http://204.177.92.204/w/getc
    lientid?srv=china_sex&ver=0,0,0,62 HTTP/1.0" 407 271
    10.160.17.108 - weizc [19/Nov/2002:11:32:33 +0800] "GET
    http://www.guosen.com/cg
    i-bin/RHStockGraphics.dll?GetTLine?code=10000001&cx=150&cy=70&am=0
    HTTP/1.0" 200
    1004
    10.161.130.3 - czy-ykj [19/Nov/2002:11:32:34 +0800] "GET http://ad4.sina.com.cn/
    btn/dbtel-tlhp.swf HTTP/1.0" 304 -
    10.161.159.40 - - [19/Nov/2002:11:32:34 +0800] "PUT http://204.177.92.204/w/getc
    lientid?srv=china_sex&ver=0,0,0,62 HTTP/1.0" 407 271
    errors
    [19/Nov/2002:11:33:13] failure: for host 10.160.80.148 trying to GET http://myjh
    xp.com/bbs/forums.cgi?forum=4, retrieve-exit-routine reports: proxy retrieve fai
    led: Proxy server's network connection was refused by the server: myjhxp.com.
    The server may not be accepting connections or may be busy. Try connecting
    agai
    n later.
    [19/Nov/2002:11:33:13] warning: last-modified in future (not caching): Tue Nov 1
    9 03:51:01 2002
    [19/Nov/2002:11:33:13] failure: for host 10.160.80.148 trying to GET http://myjh
    xp.com/bbs/forums.cgi?forum=4, retrieve-exit-routine reports: proxy retrieve fai
    led: Proxy server's network connection was refused by the server: myjhxp.com.
    The server may not be accepting connections or may be busy. Try connecting
    agai
    n later.
    [19/Nov/2002:11:33:13] failure: for host 10.162.101.73 trying to GET ftp://202.1
    15.144.37/software/special/WinPE-9down.rar, retrieve-exit-routine reports: proxy
    retrieve failed: Proxy server's network connection was refused by the server:
    202.115.144.37. The server may not be accepting connections or may be busy. Tr
    y connecting again later.
    [19/Nov/2002:11:33:13] warning: last-modified in future (not caching): Tue Nov 1
    9 18:21:00 2002
    [19/Nov/2002:11:33:13] warning: last-modified in future (not caching): Tue Nov 1
    9 03:51:01 2002
    The logs is so large, i only can give you some of them typically.
    and the types of log's record when problem occurs i have supplied to you, also i
    pasted here
    [25/Oct/2002:11:18:06] 8269 debug: io_loop: killing tunnel after rollover, lastactivity
    == 1966619898,PR_IntervalNow says 2026622109
    [25/Oct/2002:11:20:31] 8269 debug: io_loop: killing tunnel after rollover, lastactivity
    == 1981101717,PR_IntervalNow says 2041102282
    [25/Oct/2002:11:20:48] 754 error: unknown request type 0x47 from
    10.160.8.159:30 83
    [25/Oct/2002:11:41:07] 14946 debug: ACCEPT RETURNED NULL! io_total = 63
    dead =-1
    ------------------------------------------------------------------

  • Configuring authentication in web proxy server

    We are using iPlanet Web Proxy Server 3.6 on WindowsNT 4.0
    After installation of iplanet web proxy server 3.6, and making a request for internet access through browser it does not ask for authentication. There is no pop up window received for user name password to authenticate users.
    Upon creating a group and then adding a few members (user1,user2,user3 etc.) to it, we configure rules to restrict user access to internet in the Global settings tab. After saving all the configuration and taking a restart of the proxy server, when we try to log on to internet from a
    different client machine (browser) using an existing user id and password, it does not prompt us for user name and password even though the option "restrict access" in global setting is properly set.
    My first question......
    =>DOES iPlanet Web Proxy allow for such authentication pop up ??
    => If Yes, then kindly let us know where we have gone wrong in configuring the server.
    We are NOT using any webserver or LDAP to authenticate users. No SSL is enabled.
    Please suggest.

    We are using iPlanet Web Proxy Server 3.6 on WindowsNT 4.0
    After installation of iplanet web proxy server 3.6, and making a request for internet access through browser it does not ask for authentication. There is no pop up window received for user name password to authenticate users.
    Upon creating a group and then adding a few members (user1,user2,user3 etc.) to it, we configure rules to restrict user access to internet in the Global settings tab. After saving all the configuration and taking a restart of the proxy server, when we try to log on to internet from a
    different client machine (browser) using an existing user id and password, it does not prompt us for user name and password even though the option "restrict access" in global setting is properly set.
    My first question......
    =>DOES iPlanet Web Proxy allow for such authentication pop up ??
    => If Yes, then kindly let us know where we have gone wrong in configuring the server.
    We are NOT using any webserver or LDAP to authenticate users. No SSL is enabled.
    Please suggest.

  • Proxy Server 3.6 StdIn Error

    I have seen a similiar post previously, but not a response.
    Several errors with the Sun/1 Proxy Server 3.6 sp 1 proxy on Solaris 8 with reverse-proxy URL's configured:
    1. Attempting to turn on access control from the Restrict Access page on Server properties results in the message "System Error: Cannot read POST variables from stdin"
    2. Attempting to access a web server via the reverse proxy results in a web response "You are not authorized to view this page" HTTP 403 error in the browser. The proxy error log includes an entry reading "security: for host xxx trying to GET /: deny-service reports: denying service of /"
    3. Connection attempts to the internal web server are not attempted from the proxy server, indicating the authentication error is local with the proxy server configuration itself.
    3. If the Admin Server is configured to use an LDAP database the virtual server will not start - the server process continues to clock, forks aproximately 10-12 processes with the server start script, each of which must be manually killed (the stop script has no effect).
    The proxy server software has been removed/reloaded to eliminate the potential of corruption in the installation directory to no avail.
    Thoughts/Assistance?

    Excuse the delay in replying (too much tryptophan ;)
    Thanks for the feedback on the post errors - without understanding the specific requirements of the browser (other than Netscape as the required interface) the problem was resolved by using an alternative client. Strange that Netscape 7 (causing the POST error) did initially function properly.
    The ldap bind, authentication, etc. against the desired ldap database were verified through command line ldap calls from the host os (Solaris). In production, the challenge was the desired attribute for authentication is not UID but CN. Unfortunately the Proxy server does not provide an interface to modify the ldap query and the UID is hardcoded. Compounding the issue is the fact that the authentication libraries used by the Proxy server are internal to the software, and cannot be redirected to other libraries (such as PAM).
    Options such as custom development, etc. were explored but eliminated due to cost and potential complexity. Other Proxy alternatives are being explored based on the authentication issue....
    Hope this helps
    C. Smith

  • IPlanet Web Proxy Server 3.6 SP 5 Persistent Connection doesn't work

    I use iPlanet-Web-Proxy-Server/3.6-SP5 on Soloaris. and trying to use persistenet connection functions in forward proxy through setting keep alive to "ON". But I found this functions doesn't work at all. The following trace is the HTTP Header info i got from receiver.
    1. The HTTP Header info without using Proxy Server
    Request headers :
    proxy-authorization: Basic YXBwLWVtcXVzZXI6MTIzNDU2Nzg=
    connection: Keep-Alive
    proxy-connection: Keep-Alive
    server: IBM WebSphere MQ internet pass-thru V1.3.2
    accept: application/octet-stream
    host: 10.1.13.43:1414
    user-agent: 10.1.72.254:1414
    content-type: application/octet-stream
    content-length: 132
    accept-encoding: identity
    2. The HTTP Header info using Proxy Server
    Request headers :
    server: IBM WebSphere MQ internet pass-thru V1.3.2
    accept: application/octet-stream
    host: 10.1.72.254:1414
    user-agent: 10.1.72.254:1414
    content-type: application/octet-stream
    content-length: 132
    accept-encoding: identity
    date: Mon, 06 Sep 2004 18:04:12 GMT
    forwarded: by http://iaccess.mor.cr:8085 (iPlanet-Web-Proxy-Server/3.6-SP5)
    via: 1.1 S1PS,1.1 S1PS
    I found Kepp-Alive information ( "connection: Keep-Alive" and " proxy-connection: Keep-Alive")
    was taken out by proxy server.
    Is a proxy server bug? Can I do something to make it work?
    Regards,
    songtao

    Hi
    This as per the HTTP/1.1 RFC (RFC2616)
    The Connection general-header field allows the sender to specify options that are desired for that particular connection and MUST NOT be communicated by proxies over further connections.
    The Connection header has the following grammar:
    Connection = "Connection" ":" 1#(connection-token)
    connection-token = token
    HTTP/1.1 proxies MUST parse the Connection header field before a message is forwarded and, for each connection-token in this field, remove any header field(s) from the message with the same name as the connection-token. Connection options are signaled by the presence of a connection-token in the Connection header field, not by any corresponding additional header field(s), since the additional header field may not be sent if there are no parameters associated with that connection option.
    Read the following at
    http://www.w3.org/Protocols/rfc2616/rfc2616-sec8.html#sec8.1.3
    and
    http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.10
    Regards
    Nagendra HK

Maybe you are looking for