Using a Roland TD-7 with Logic Pro

Hello folks, today I come to you with a MIDI problem.
What happens is that I connect my RTD-7 module to a MIDI-to-USB cable and then connect it right to my iMac. I open Logic and choose any drumkit but I don't hear any sounds, Logic is not getting any MIDI signal.
It's weird, because I checked with Audio MIDI Setup, under the MIDI window and it is there as "USB2.0-MIDI", so I'm pretty clueless right now.
Any help will be appreciated!
Thanks!

Hi JacksonFroAR,
Thanks for visiting Apple Support Communities.
See the Logic Pro X User Guide for information on storing your project assets on an external drive:
http://support.apple.com/manuals/#professionalsoftware
Manage project assets (pg. 155)
When you create or save a project, you can choose whether the assets you use in your project are saved in the project, or referenced from their location on your computer or a connected storage device.
Cheers,
Jeremy

Similar Messages

Can i use my mini Mbox 2 with logic pro 9 on iMac os x lion?

Can i use my mini Mbox 2 with logic pro 9 on iMac os x lion?

Hi there,
Did you find out anything more in regard to this?
I have been using Pro Tools 8 with the MBox 2 connected to my iMac operating Leopard. It worked a treat for nearly four years.
However the hardrive has just been replaced on the iMac which now has Snowleopard. I don't want to have to update to Lion and then fork out £500 for Pro Tools 10.
I would be content to get Logic Pro 9 if I can attach the MBox 2 to it.
Your advice would be appreciated
PXC

Hi I am attempting to use a Zed R-16 with Logic Pro 9, how can I setup a bounce for output 17-18 this is where the mixer sums (the audio outputs on the zed come through 17-18)

hi I am attempting to use a Zed R-16 with Logic Pro 9, how can I setup a bounce for output 17-18 this is where the mixer sums (the audio outputs on the zed come through 17-18)
I would like to be able to quickly bounce down my mixes, through the Zed outputs.

Pancenter...
Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
+1 on the UAD stuff....
Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
Thread 32:
0   libSystem.B.dylib
0x94c29afa mach_msg_trap + 10
1   libSystem.B.dylib
0x94c2a267 mach_msg + 68
2   ...tope.audioplugins.AU.Trash2
0x667bd57a catch_exception_raise + 250
3   libSystem.B.dylib
0x94c57259 _pthread_start + 345
4   libSystem.B.dylib
0x94c570de thread_start + 34
That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

Is anyone using the novation impulse keyboard with Logic pro x?

is anyone using the novation impulse keyboard with Logic pro x?
I currently have an M-Audio Axium controller but I cannot map any of the controllers.
I need to buy a 25 key controller anyway so I was hoping to get one that works well with Logic Pro X

I have the Logitech S530 keyboard and mouse. I had no problems with it while I was using it with 2 PowerMac G5 and one Dell XPS, but when I got the MacPro I found that it doesn't work with MacPro and a KVM switch. Logitech says their keyboard and mice are NOT made to work with KVM switches, but I didn't find that until I started using it with the Mac Pro.
The other small con is that the mouse is made for right handed people. On the other hand, I love the looks and feel of the keyboard and all the keys. It also will do the boot up holding down the Option key for choosing your startup drive and holding down the Shift key for Safe Mode, which the Kensington keyboard will not do.
MacPro 2.66 ghz., Macbook Pro, Macbook, Powerbook G4, PowerMac G5 Dual Core Mac OS X (10.4.8)

Using MOTU MachFive 2.02 with Logic Pro (from ver 8)

I'm posting this since a google search brought up nothing about this satisfactorily.
I can't remember where I read it now but if you don't want to create repeated instances of MachFive but still create multiple instruments in one MachFive instance then do the following in the Arrange window:
a) create a New instrument track and assign it to be MIDI Channel 1
b) in the I/O choose the MachFive (I use Stereo)
c) highlighting the instrument track in the Arrange window go to Track - New with next MIDI Channel - and Logic will create another track with the same MachFive instance but with the next MIDI channel (make sure the first is set to MIDI Channel 1!). In the MachFive window - assign instruments as normal...erm that's it.
d) If you want to manipulate volume/pan etc for each particular instrument in the MachFive do NOT use the audio volume/pan tools in the Automation since this will only affect the audio output
globally.
e) Instead - go to the Hyper Editor and draw in your MIDI volume and Pan and other effects there...
f) if you need to manipulate the audio of sounds you should bounce each MachFive sound to a separate audio file (being careful to mute any unwanted tracks) and then edit as an audio file by creating some audio tracks.
Hopefully this might answer a few unanswered queries

No. In short.
Mac Pro 1,1 will not support the latest version of OSX, which is needed to run Logic Pro X.
You would not want to anyway. 2GB is far too little to run Mountain Lion on, let alone Logic on top of that.

Using an external hard drive with Logic Pro X ?

Hi, I am currently running a 2012 MacBook Pro and just installed Logic Pro X. I have a 500 GB, 7200 RPM G Drive Mini using USB 3.0.
Wanting to save space on my internal hard drive, and not tax my system, if necessary? How do I go about recording and saving projects on my external drive. Any and all details of running this type of setup would be appreciated. Thanks.

Hi JacksonFroAR,
Thanks for visiting Apple Support Communities.
See the Logic Pro X User Guide for information on storing your project assets on an external drive:
http://support.apple.com/manuals/#professionalsoftware
Manage project assets (pg. 155)
When you create or save a project, you can choose whether the assets you use in your project are saved in the project, or referenced from their location on your computer or a connected storage device.
Cheers,
Jeremy

Trouble Syncing Roland TR-606 with Logic Pro

Hello.
I had this working before and I dont know what went wrong.
The setup is like this Logic sending MIDI Clock > Midisport Interface > Kenton Pro Solo (set to send Sync24 out of the 'Through' port > Roland 606's MIDI sync input.
When I start and stop from Logic the 606 starts and stops accordingly. Also, when I change the tempo from within Logic the tempo on the 606 also changes HOWEVER the speed that the 606 is running at is always faster than the metronome in logic - It doesn't sync. Is this a problem with the 606?
What am I doing wrong. Would be very grateful for any advice.
Thanks.

More info: From the Logic 'MIDI Sync preferences' I have set it to send MIDI Clock and from the 'MIDI Sync project settings' I am sending it to the correct port on my interface. The MIDI clock is received by the Roland however fails to sync with it properly..

Anyone using Antares Auto-Tune 5 with Logic Pro 8 on a Mac Intel?

I just bought the upgrade from Auto-Tune 4 to Auto-Tune 5 since v4 didn't work with the Intel machines, and I'm using a Mac Pro.
After trying to tune one simple part of one song, I'm going nuts. The plug-in is full of bugs, it seems -- mostly in graphical mode. Is anyone else either successfully using this set-up or experiencing major bugs with it?

I'm thinking it's an Intel thing.
When I try to use the various tools in the graphical view, the plug-in will just basically stop responding. I can't close out the plug-in window, and sometimes the "options" window of AT 5 will pop up for no reason and freeze. Its "cancel" and "OK" buttons are non-functioning at that point.
I've hard to force quit Logic a few times now, which pains me to say. Not to mention that it's setting my project back.
Antares doesn't have a forum, and I can't find anything else about this apparent anomaly online anywhere.
Unrelated: I've had problems with Drumagog in LP8 as well. If I try to drag the Drumagog pop-up window around the screen, the only thing that moves is the semi-transparent LP 8 "container". The actual Drumagog window stays put as the LP 8 window that frames the Drumagog window moves about. Very strange.

Using MIDI Touch on iPad with Logic Pro

Hello,
I try to set up MIDI Touch on iPad as a control surface. It operates through Wifi MIDI network.
When monitoring under Logic, i can see the differents MIDI messages going through the sequencer (Notes, CC messages) correctly (all values 0,1,2,...127) for every touch controllers.
When I use MIDI learn (for example to set up a volume fader), it seems to be learn but it doesn't work properly. When I move the touch controller, the value of Logic parameter jump from 0 to 127...
If I set up a touch control in MIDI Touch with CC7, it control perfectly the volume of a selected track in logic.
It seems i am missing something... Could you help me?
Thank you
Pit

Question - can I transfer the apps I bought for iPod Touch to iPad.
If they're located in the same iTunes library and the computer is authorized, yes. If not, authorize the computer from the Store menu, connect the iPod touch, and choose Transfer Purchases from the dialog box which appears.
(51106)

Can I use a VS-700C control surface with Logic Pro?

Hi,
Does anybody know if I can use a Roland VS-700C control surface and/or VS-700R audio interface with Logic Pro?
Cheers,
Craig

If it supports the Makie protocol, it might work... but I wouldn't purchase one on that basis without trying it first.

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. How do I get it to stop?

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. What is causing it and how do I get it to stop? My sound is running through the Saffire Pro 40 Interface (Focusrite) into external speakers with powered amps.
Also, When I record I am hearing little pops in the system. I have checked all of my meters and they are not clipping. What is causing it and how do I get it to stop?
Ken

MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter-

Can I use digi 003 console with logic pro 10 ???

I have the new mac pro with new os mavrik and
I have the digi 003 console work with pro tools 10 perfect
I want to work with logic pro 10 and I don't know if it work with my digi 003 console
Please help me

Hi again Bill,
Something very strange has happened this morning. I was using Logic and thought 'I'll just plug in the TASCAM again to see if anything happens' and it just worked straight away. This is most peculiar as I didn't do or press anything to make it work. Yesterday when I was trying to get it to work, I closed the program and restarted the computer several times are making adjustmemnts but it just wasn't working at all. It seems a good night sleep has gievn it time to think things through lol.

Can i use Avid mbox pro with logic pro x? And also which mac would be best for using avid pro tools 11 ;)

Can i use Avid mbox pro with logic pro x? And also which mac would be best for using avid pro tools 11

If your info is correct you need to first buy Snow Leopard from the Apple on-line store ($20) install and update to 10.6.8 and then buy Lion from the App Store for $20.

Can i use my snowball usb mic with Logic or Pro Tools???

Can i use my snowball usb mic with Logic or Pro Tools???

Hi there,
Did you find out anything more in regard to this?
I have been using Pro Tools 8 with the MBox 2 connected to my iMac operating Leopard. It worked a treat for nearly four years.
However the hardrive has just been replaced on the iMac which now has Snowleopard. I don't want to have to update to Lion and then fork out £500 for Pro Tools 10.
I would be content to get Logic Pro 9 if I can attach the MBox 2 to it.
Your advice would be appreciated
PXC

You can't use this version of the application "logic pro" with this version of os x

After installing all of Logic Studio (i.e. install dvd, audio content 1-3, jam packs 1-3), my laptop concludes that everything is installed successfully, however, when going to open to Logic, error icon appears and says:
'you can't use this version of the application "logic pro" with this version of os x'

Thank you! I found that just after I entered the question. I reinstalled everything two times, updated software, but was still having issues. But, I specifically updated the 9.1.8 (which was supposedly included in my standard software update). Guess I needed to give it some extra attention and affection.
P.S. - Why do I feel like the more I upgrade versions of OS X, the worse off I am getting or am? Isn't it supposed to be opposite...isn't it supposed to make things better...come on, mac...where you at? mt. lion or mavericks. I'm downloading Snow Leopard to make some programs run. (um, yeah).

Using a Roland TD-7 with Logic Pro

Similar Messages

Maybe you are looking for